How to connect to a "EAP-SIM" authentication wlan ...

Any advice would be great!
Thanks

Hi,
What you can do is to set up a reverse and the forward proxy. When the client hits the first proxy it should be configured as a reverse proxy which will redirect the request to the second proxy (this will be a reverse proxy) which will connect to the internet.
Hope this helps.
Regards,
Dakshin.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

Similar Messages

Error in wifi connection - Shows EAP -SIM AUTHENTI...

I have nokia E-63, shows in error of wlfi - as EAP - Sim Authentication Failed, please resolved the issue.

Do you need EAP? Use WPA/WEP passphrase.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

EAP-SIM Authentication on Lenovo K900

Hello All,
I want to use EAP-SIM authentication on Lenovo k900 to connect to wifi. Does anyone know how to? because there is no option EAP-SIM on authentication option.
Or there are other option how to use EAP-SIM?
thanks

To Lenovo Android Developer,
Please add this EAP-SIM Wifi authentication feature on the next firmware update.
Because in Indonesia almost all GSM operators using EAP-SIM for their WiFi service.
Thank you.

EAP SIM Authentication Failure

Hi all,
Is there a way to debug EAP SIM authentication on iPhone / iPad? I see Challenge: AT_MAC_NOT_VALID failures in syslog everytime I try to connect to an EAPSIM server (freeradius). Please refer to following pcap
http://www.cloudshark.org/captures/b9610f2b4a25
I am using following values for simtriplets on freeradius server:
1320727710000010,9fddc72092c6ad036b6e464789315b78,d113e49b,7fc85b9918d92ea8
1320727710000010,81e92b6c0ee0e12ebceba8d92a99dfa5,cca822be,231f55c24633a406
1320727710000010,b120f1c1a0102a2f507dd543de68281f,0ff5b99f,4421fce1f3427e22
The iPad is loaded with a test SIM which is programmed with following values of Ki and Op and above SRES and Kc were generated using following values:
key=0C0A34601D4F07677303652C0462535B
op=63bfa50ee6523365ff14c1f45f88737d
I have verified GSM milenage algorithm with test keys in 3GPP TS 55.205 v9.0.0 and the algorithm seems to work fine. All results match with the test inputs/results provided in 3GPP TS 55.205 v9.0.0. So I doubt there is some issue with SRES/Kc for above Ki/Op values.

Hi,
We spent many hours trying to solve this problem.
Our setup:
Cisco wireless setup, using windows NPS for 802.1x authentication.
Certificate base auth, with an internal PKI sending out client machine certs, and also the server cert.
Auth was failing with "reason code 22, The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server."
It turned out to be a GPO setting on the server, that was enforcing key protection.
There is this note on the below technet article:
Requiring the use of strong private key protection and user prompting on all new and imported keys will disable some applications, such as Encrypting File System (EFS) and wireless (802.1X) authentication that cannot display UI. For more information, see article 320828 in the Microsoft Knowledge Base (http://go.microsoft.com/fwlink/?LinkId=115037).
http://technet.microsoft.com/en-us/library/cc725621(v=WS.10).aspx
Hopefully this helps someone out, if you have the same annoying error.

How to connect to internet with sim 2 in XL

XL doesn't give option to connect internet with sim 2. When I turn on mobile data it always connect with sim 1. All time I have to go to settings to connect with sim 2 after connected with sim 1. Is there any way to choose sim when I'm turning on mobile data?

The user guide gives you this..
By default, your phone asks you which SIM to use for the connection. You can also set the default SIM for calls, messaging, and mobile data connections.
Select which SIM to use for calls and messaging
Tap Settings icon > Dual SIM.
Switch Always ask to OFF.
Select which SIM to use for calls and messaging.
Select which SIM to use for mobile data connections
Tap Settings icon > Mobile data and networks, and select which SIM to use for mobile data connections.
Availability of SIMs
You can use 2G or 3G SIMs in both SIM1 and SIM2 slots, but the SIM2 slot supports 2G network only.
When you set one SIM to be used for outgoing calls or messages, or for data connections, the other SIM can still receive calls or messages.
When one SIM is having an active connection, the other SIM is not available.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to connect to a EAP-MSCHAP network?

I'm having trouble connecting to my schools network under Arch Linux using netcfg. Wired internet works well, but I'm unable to connect by wireless as I would under Windows or Ubuntu (using network-manager, which supports MS-CHAP). The easy solution would be to simply install network-manager, but I would rather use CLI programs.
The relevant information;
Network Authentication; Open
Data Encryption; WEP
automatically provided key
EAP type; PEAP
authentication; Secured Password (EAP-MSCHAP v2)
no server certificate validation.

Wintervenom wrote:
network={
ssid="Name of the Access Point"
key_mgmt=WPA-EAP
eap=PEAP
identity="Authentication Username"
password="Authentication Password"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
priority=1
CONNECTION="wireless"
DESCRIPTION="Manual Wi-Fi connection."
INTERFACE="wlan0"
SECURITY="wpa-config"
WPA_CONF="/etc/wpa_supplicant.conf"
IP="dhcp"
TIMEOUT=45
The second excerpt looks like a netcfg related config file, but I'm not sure what to do with the first one.

How to connect my E61 with computer using WLAN

please tell me the full setting of WLAN how i can connect my computer with WLAN

You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
iOS: Supported Bluetooth profiles

Does Cisco Aironet 1131G really support EAP-SIM ?

Hello!
I have tried to configure EAP-SIM authentication on Cisco Aironet 1131G for Wi-Fi Offload but unfortunately I couldnt make it work. As far as I understand the Wi-Fi standard it is fully supported in 802.11n within WPA2-Enterprise standard. I have read Cisco datasheet for 1131G where your are claiming that you support EAP-SIM in WPA2 also. I have tried to configure it according to configuration guide but it always requires to enter password key first when I try to connect to SSID with configured WPA2 and EAP-SIM. Can you please provide us with additional info how to properly configure AP or confirm that EAP-SIM needed for seamless 3G/Wi-Fi authentication is supported only within WPA2-Enterprise.
BR,
Denys

Yes EAP-SIM is supported by Cisco Aironet 1131G. For more detail about this product you can go to below link.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6087/product_data_sheet0900aecd801b9058.htmlhttp://

EAP-SIM over iphone5

Does any one tried EAP-SIM authentication with IPHONE5
I see that IPHONE5 is not responding for Challenge message with triples from Radius Server

We seem to have the same issue where IOS is breaking off the EAP-SIM authentication at 6 seconds, while the AP is waiting on a RADIUS Access-Accept, which eventually comes in, but after IOS already stopped the wifi authentication process.

EAP-SIM Fast Re-Authentication

Hi,
I understand IPHONE supports EAP-SIM, but how about Fast Re-Authentication defined in RFC 4186? does IPHONE support it?

To Lenovo Android Developer,
Please add this EAP-SIM Wifi authentication feature on the next firmware update.
Because in Indonesia almost all GSM operators using EAP-SIM for their WiFi service.
Thank you.

How to use EAP-SIM on Nokia C7-00?

Hello,
We have a new mobile operator in France (Free mobile) and it announces that we can connect to its network using EAP-SIM.
Is it possible with a Nokia C7?
I found a setting in the EAP-SIM network destinations of my C7 but I don't know how to set it up.
Here's what I did.
I add a new access point:
- parameters
- connectivity
- parameters
- destinations
- Internet
- options
- New access point
- Automatically check for available access points? Yes.
- Access points available: Wi-Fi
- Select a Wi-Fi: FreeWifi.
Then I select the new access point FreeWifi and I change:
- Wi-Fi security method : WPA/WPA2
- Wi-Fi Security Settings : EAP
- EAP extension parameters : EAP-SIM checked only.
In EAP-SIM:
- User name used: from the SIM card
- Username: empty
- Domain used: from the SIM card
- Field: empty
But when I use this access point, the connection works but the browser displays an error page.
I have a username and a password that I use to connect to Free hotspots with my smartphone or my laptop.
Should I use it in the EAP extension settings?
There is a field "user name" but no "password" field and I don't know what to put in the field "Domain".
Thanks if you can help me.
Solved!
Go to Solution.

By the way, it works now.
Just à matter of activation by my provider (Free).

Eap tls authentication fails if bluetooth device connected

Hi All, I'm new to Macs but was tasked with getting a MacBook Air connected to our AD integrated, 802.1x wifi network. After a lot of trial and error with certificates I finally got this working but now have a rather bizarre problem. With the MBA on it's own it will connect to the wifi network, sucessfully authenticate and work perfectly well. However, if my Apple bluetooth mouse or keyboard are connected to the MBA the EAP-TLS authentication fails. A packet capture of the connection process shows that at the same point every time the process take a while then a packet shows as "Unknown Error Ignored", then loops thorugh the process. Turning off the keybpard and mouse at this point and the MBA will connect. Once connected I can then connect the keyboard and mouse and continue to stay connected for a while before, I assume, the AP forces a re-auth and the connection drops again.
Has anyone come across this elsewhere?
Thanks

I have a Macbook Pro Retina 15" from 2012 and it has the same issue. Running 10.8.4. I have spent probably 5-6 hours trying to troubleshoot cert's network settings, did a complete fresh install (then restored from timemachine when that did not work) with no luck this solution worked but obviously is not a real solution as it should not confilct in this way. Great job on finding a workaround! I will be contacting apple about this ASAP under my applecare.

How to connect to website through computer if i do not use internet through phon's sim

how to connect to website through computer if i do not use internet through phon's sim

Connect through wifi.
Turn off Cellular data through settings __ General __ Network __ Cellular Data on/off

Lumia 920 EAP-SIM WiFi Settings

Please help me,
How to configure Lumia 920 to use EAP-SIM security, In the specification page it say support EAP-SIM.
I Can't choose security type from WiFi setting, even from advanced setting. Lumia 920 always ask username & password everytime I try to connect to my operator WiFi, in blackberry I can choose EAP-SIM Security & don't need entering username & password.
Sorry fo my English.
Thank you

sam_kara, this thread is about WPA-Enterprise with EAP-SIM. In your case, you are using TLS or TTLS or … you have to figure out which outer and inner EAP types your company uses. Then you can vote for it:
TLS
TTLS
rioagusw wrote:
How to configure Lumia 920 to use EAP-SIM security.
With EAP-SIM you do not configure anything, it just works. However, have a look …
Where did you read about Windows Phone 8 supporting EAP-SIM? The qualification says something different.

EAP-SIM for iPhone iOS 8

Dears,
I'm trying to connect to Wi-Fi network, through SIM authentication, how can i configure my iPhone 5s to authenticate through the SIM, and is there any configurator to use through windows 7 PC?
regards,
Orwa

Dears,
I'm trying to connect to Wi-Fi network, through SIM authentication, how can i configure my iPhone 5s to authenticate through the SIM, and is there any configurator to use through windows 7 PC?
regards,
Orwa

How to connect to a "EAP-SIM" authentication wlan ...

Similar Messages

Maybe you are looking for