How to connect to a guest-VM using VNC/tightVNC

I have a guest-VM installed in OVM Server. OVM Server is running on top of VirtualBox. From the HOST-OS, I can ping to the guest-VM. I attempted vncviewer into the guest-VM, however no luck. I did 192.168.1.51:5900
However, I can launch through the console via OVMM and can see the guest-VM.
I have turn off firewall in guest-VM (linux). I was able to use vncviewer the day before.
Any ideas?
Thanks.

Dude.... The VM console feature using VNC is proxied through the VM Manager. The VNC viewer connects through the VM Manager. You can't connect directly to the VM guest using VNC... unless.... You have VNC Server installed on that guest. Even then, it might not be running on 5900 unless you're running a windows VM guest. In which case, 5900 is the default port. On many linux distributions, you have define the port in the setup and no one I know runs VNC on port 5900 in Linux. If its a Linux guest with rpm based packaging do a
rpm -qa | grep vnc
This will tell if the package is at least installed.

Similar Messages

  • How to connect my ipad with mac using bluetooth?

    how to connect my ipad with mac using bluetooth?

    You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
    iOS: Supported Bluetooth profiles

  • Hi, can anybody tell me how I connect my iPad to  AppleTV using  "home  sharing" ? Thanks

    Hi, can anybody tell me how I connect my iPad to AppleTV using home sharing? I can,t find hoe sharing on my iPad. Thanks

    Apple TV
    http://support.apple.com/kb/HT4437
    http://support.apple.com/kb/HT5209
    http://support.apple.com/kb/HT4352

  • Connection to the Guest Profile using ISE...!!!

    Hi,
    I'm involved in the rollout for ISE. While trying to connect to the Guest profile using the browser, it gets connected to the Guest profile, after authenticating the credentials. But after some time, the connection gets disconnected automatically and this happens on and on, even if the client is not roaming.
    And the second problem is that, when the client roams, it asks for the credentials again to get connected  to the Guest profile. Is this the usual behaviour or are there any problems.?
    It would be really helpful if someone could help me with this.

    About the first problem, please check the "session timeout" timer in your ssid configuration. By default it's 30 minutes so every 30 minutes you would have to re-authenticate. In my deployments I configure this parameter to 12 hours to avoid this kind of problems
    About the roaming issue, I think currently this is the normal behavior. I think with ISE 1.2 guest authentication will be improved. I will check on that.
    Please rate if this helps

  • How to connect to a FTP server using a proxy in a DMZ with XI file adapter?

    Hello,
    Want to connect to an ftp server using a proxy in the DMZ. I don't see any standard options in the XI file adapter to use a standard. Is there a workaround?
    I already looked at https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=57137
    But it didn't help me.
    Regards,
    Erik van Lisdonk

    U can't use FTP over SSH i.e., SFTP. But u may use FTPS by enabling the SSL layer on J2EE of XI. See this
    SFTP vs. FTPS in SAP PI
    Regards,
    Prateek

  • How to Connect Microsoft SQL 2000 database using JDBC

    Hi all..
    I want to connect Microsoft SQL 2000 database using JDBC. I want from initial steps also. (about JDBC driver & its installation)
    Thankz

    Just checkout the SQL Server JDBC Driver Documentation at the manfacturer's site: http://msdn2.microsoft.com/en-us/data/aa937724.aspx

  • How to connect laptop to router by using udp receiver

    I try to communicate between computer and laptop via router. Computer connect to router by wire. laptop have Wireless Mini Card. I open udp receiver to connect to router. How to connect to router ? what is net address number ? and what is port number ? how to find them ?

    You can only connect to a router port if the router is running a service that
    Allows you to do so. What kind of connections are you trying to do?
    The net address is the ip address in u32.
    The port is determined by the service you want to access.
    What do you actually want to do with all this?
    We need much more info. Router model?
    LabVIEW Champion . Do more with less code and in less time .

  • How to connect nokia 6610 to pc using data cable

    i hav dku-5 connectivity adapter cable and i have installed both driver and pc suite but still i cant connect my nokia 6610 phone to my pc how can i connect it?..

    I believe the DKU-5 cable is no longer supported by the current versions of PCsuite and Ovi Suite. It was replaced by the CA-42. If won;t work if you are trying to use it with the latest version of pcsuite.
    Options are to get hold of a old version of PCsuite or to get the newer cable. There should be an old version of PCsuite on the disc that came ith the phone.

  • How to connect to Window 2003 server using "connect as"

    How can I set up Lion to easily connect to specified shares in the windows 2003 server. I want to authenticate as a user other than the one I am logged into on my Macbook? I am setting this up for teachers in a school. The macbook may be used by multiple teachers. Best way (simplest) please.

    Hi
    Let's pretend the Windows Server has an IP address of 10.10.10.254
    Go Menu > Connect to Server > smb://10.10.10.254. When prompted enter the account credentials of a user (username and password) that exists on the Windows Server. Alternatively you could use cifs://10.10.10.254. Either one will do. Assuming no 'silliness' on the Windows Network Administrator's part the share should mount.
    For ease of connectivity afterwards you could tick the 'remember password using keychain manager' box. Personally I find keychain manager more trouble than it's worth. However you deal with this as you see fit. If it's multiple users using the same workstation I would not enable the option.
    Once mounted you can view the Server Share on the user's Desktop by enabling the option in the Finder. It should appear as a blue-ish drive icon on the Desktop. Add the icon in that User's Login Items in the Accounts Preferences Pane. Think of it a little like the Windows equivalent of "mapping a network drive".
    Next time that user logs into their local account and provided the workstation is connected to the same network, the share point should mount.
    You could also or alternatively drag the share icon to the right hand side of Dock. Click on it to re-connect to the share after you've disconnected from it.
    HTH?
    Tony

  • How to connect Oracle 11g in CF9 using tnsnames

    Hi, I'm using CF9 running on Solaris and I just had Oracle 11g installed using tnsnames. Can someone explain to me how to add the Oracle string in CF admin? I have confirmed that I can connect to the database but I don't think I have the correct syntax for connection string. I think it should be similar to the following: jdbc:datadirect:oracle:TNSNAMES_FILE=/d01/oracle/product/v.11.2.0.3_client/network/admin/ tnsnames.ora:@dbserver.com:1549:SIDname;driver=oracle.jdbc.Oracle
    Does anyone have an idea?
    Thanks in advance

    I have Oracle client installed on the web server with Oracle database installed on separate server. When I add DSN and SID, I get the following error:
    Connection verification failed for data source: dsn_test
    java.sql.SQLNonTransientConnectionException:[Macromedia][Oracle JDBC Driver][Oracle]ORA-12505 Connection refused, the specified SID (SID_NAME) was not recognized by the Oracle server.
    The root cause was that:java.sql.SQLNonTransientConnectionException:[Macromedia][Oracle JDBC Driver][Oracle]ORA-12505 Connection refused, the specified SID (SID_NAME) was not recognized by the Oracle server.
    Any ideas?

  • How to connect to Oracle Database table using xquery (using 'ora:view')

    Hi,
    I am new to this forum and JDeveloper, but I am trying to use xquery accessing an Oracle database, but I can't seem to get it working, nor can I find what I am doing wrong.
    The xquery statement I (try to) use is:
    for $x in ora:view("TOU_TEST")
    return $x/txt
    (In which "TOU_TEST" is the table with column 'txt')
    But I get this "Dutch" error message:
    Er moet een JDBC-standaardverbinding beschikbaar zijn voor de functie 'ora:view'.
    (basically giving an error message about the default JDBC connection).
    I've searched a lot (Technet, Google, JDeveloper Help), but can't find out what I am doing wrong.
    Could you tell me what I am doing wrong/ how to solve this?
    Thanks a lot.
    Greetings,
    Tom

    Hi Friend,
    Try this.
    "Declaration.
    data : begin of zemployee.
               Include structure zeployee542.
    data : end of zemployee.
    *in screen give field name as <zemployee-Fieldname>
    case 'OK_CODE'.
    WHEN 'SAVE'.
          perform fill_data.
    ENDCASE.
    form FILL_DATA .
    move-corresponding zemployee  to  zeployee542.
    insert zeployee542.
    clear : zemployee, zeployee542.
    endform. " FILL_DATA
    Reward if you find usefull

  • How to connect my G4 to wifi using airport card

    I have power mac G4 0SX 10.3.9   just put airport card in,,, it can find my wifi network, but when I put in the password to activate the connection,,, I get  "error joining the airport  network..... ......

    Hello,
    If your Router is using WPA2 the original Airport cards cannot do that, some even need a firmware update to do WPA/TKIP, but not AES, all can do WEP, but that's quite insecure these days.

  • How to connect my E61 with computer using WLAN

    please tell me the full setting of WLAN how i can connect my computer with WLAN

    You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
    iOS: Supported Bluetooth profiles

  • How to connect Portege M700 to TV using VGA port?

    I bought a VGA to S-video/audio adapter and connected it to my VGA port and to the TV.
    Nothing happened.
    In control panel.... no other display/external display was detected.
    The only postings I have come across use a port emulator or something.
    I have the Portege M700 preinstalled with Vista Business tablet.
    Any ideas would be most welcome.
    Thanks

    Thanks for answering.
    I used an adapter which plugs into the VGA port on my M700 and allows either audio/display or S-video to connect to it. That is what I used, trying to connect via S-video or scart... and I'm afraid it did not work for me ;-(
    It is a VGA to S-video/audio convertor.
    Here is thye ebay link to the adapter I bought for this:
    http://cgi.ebay.co.uk/VGA-to-TV-Converter-S-Video-RCA-Out-Cable-Adapter-UK_W0QQitemZ120343643231QQihZ002QQcategoryZ41993QQ tcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
    I may be doing something stoopid... I hope I am but it worries me that if it works for you, there must be something wrong with my notebook :-(
    The graphics adapter shows "single display" and the multiple display option is not available there.
    I am confused as my old laptop used to work just fine.
    I am wondering if there is something I need to activate, but there is nothing in the bios setup or control panel.
    I just physically connected them and then clicked on the "connect to external display" as well as checking the graphics options.
    Perhaps the cable is the wrong one ?
    Message was edited by: cinnamongirl
    Also, when I use FN + F5, nothing happens. No windows come up.

  • How to connect Macbook to LG 42PQ30 using Mini DVi to HDMI??

    Hi,
    I have a unibody macbook. I am using a mini dvi to hdmi(1.3b) connector to connect to my new LG 42PQ30 plasma tv. It gives me a black screen with the message "No Signal" hovering around the screen. Please let me know about any solutions that you have. Thanks.

    Go into Displays preferences on the Mac and make sure a compatible timing is being sent to the TV.

Maybe you are looking for

  • How to change posting of Planned Delivery cost in Po?

    i need to change posting of planned delivery cost in PO to other expense account. as when i enter any planed delivery cost in PO it direct posted to the inventory account but i need to change it to be posted to other account.

  • Audtion CC hangs, then crashes on Windows 7 Ultimate x64

    I'm not sure what's going on as it has launched previously.  It hangs on the splash screen while displaying, "initializing required application components... (DLMS)" then eventually stops responding and crashes.  I've cleared preferences, in additio

  • Adobe Muse CC - Website wird grau dargestellt

    Ich habe gerade eine Website in Adobe Muse fertiggestellt und wollte mir diese dann im browser anzeigen lassen. Leider wurde mir dabei nicht die Website sondern einfach eine graue fläche im browser dargestellt. Auch das exportieren als HTML brachte k

  • Why does my ipad 3 keep crashing

    My ipad 3 16g wifi keeps crashing. Also I have noticed recently the ipad gets quite hot.last week it crashed and was totally unresponsive for around 2 hours,and had a complete battery drain(from 25%  to zero)it came back on by it self. I then updated

  • Runs VERY slowly--pages change very slowly

    Chrome will run fast.