How to connect to a PXI-1042 from Lap Top

I have a 1042 chassis that I want to use for calibrations. I have a Laptop with N.I. Measurement & Automation Explorer, Cal Executive and a GPIB-USB-B interface.
The Chassis has a PXI-GPIB card in slot 3.
The N.I. explorer does not recognize the chassis, what am I missing in order to calibrate PXI-DMM cards?
Please advice.
Thank you.
P.S.
I have downloaded and installed the recommended drivers for the DMM's I am planning to calibrate.
Solved!
Go to Solution.

The card model limitations will depend on the drivers that you are using, not the cable. You will be able to collect data so as long as you have the correct drivers for your PXI cards that are compatable with your Operating System. Our controllers only use MXI cables, so the GPIB-USB cable will not work with them.
Things to remember:
The MXI cable must match the PXI card in the computer and the MXI (controller) card in the Chasis
The Drivers installed on the computer must be compatable with the cards in the chasis
The Cards must match the type of slot in the chasis
The Serial GPIB card can be used to communicate with serial devices (send commands and recieve data)
The GPIB-USB cable allows the GPIB card to communicate with devices that have a USB port. (again, only send commands and receive data)
Product Manager for Product Data
National Instruments

Similar Messages

How to connect iphone's blue tooth wiht Lap Top computer?

I just new;y buy a iPhonr5 I tried to connect the blue tooth with my Lap Top but is unable to paired it

Correct.
Supported Bluetooth Profiles
http://support.apple.com/kb/HT3647
The Sync process is Via iTunes...
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/

How to connect to a Sql server from Oracle using db link

Hi All,
Does anybody have any idea about how to connect to a sql server from oracle database using db link to syncronize the data? I need to pull the data from Sql server table to Oracle tables and relay messages back to the sql server.
Thank you,
Praveen.

we have 2 products - DG4MSQL and DG4ODBC.
DG4ODBC is for free and requires a 3rd party ODBC driver and it can connect to any 3rd party database as long as you use a suitable ODBC driver
DG4MSQL is more powerfull as it is designed for MS SQL Server databases and it supports many functions it can directly map to SQL Server equivalents - it can also call remote procedures or participtae in distributed transactions. Please be aware DG4MSQL requires a license - it is not for free.
Check out Metalink and you'll find notes how to configure both products.
For a generic overview:
Note.233876.1 Options for Connecting to Foreign Data Stores and Non-Oracle Databases
And the setup notes:
DG4ODBC
Note.561033.1 How to Setup DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX) :
Note.466225.1 How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit RDBMS.HS-3-2 :
Note.109730.1 How to setup generic connectivity (HSODBC) for 32 bit Windows (Windows NT, Windows 2000, Windows XP, Windows 2003) V817:
Note.466228.1 How to Setup DG4ODBC on Linux x86 32bit
DG4MSQL
Note.466267.1 How to Setup DG4MSQL (Database Gateway for MS SQL Server) on Windows 32bit
Note.562509.1 How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) 64bit Unix OS (Linux, Solaris, AIX,HP-UX)
Note.437374.1 How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) Release 11 on Linux

How to connect LIVE CYCLE Policy server from ADOBE ACROBAT

Hi All,
I want to know how to connect to Livecycle Policy Server from Adobe Acrobat.
I had generated mykeystore and changed the server.xml.
https://localhost:443/ is working on server m/c
but when i configure Acrobat security setting and add new server with server name as the IP Address of Server(10.224.72.38)
then it gives error : "Enable to connect to the service at https://10.224.72.38:443.
Please tell me how to connect to the server.
Thanks in Advance

Hi All,
I want to know how to connect to Livecycle Policy Server from Adobe Acrobat.
I had generated mykeystore and changed the server.xml.
https://localhost:443/ is working on server m/c
but when i configure Acrobat security setting and add new server with server name as the IP Address of Server(10.224.72.38)
then it gives error : "Enable to connect to the service at https://10.224.72.38:443.
Please tell me how to connect to the server.
Thanks in Advance

How do i get nikon pictures from lap top to ipad

how do i get nikon pictures from lap top ti ICLOUD to update to ipad2????

Yes - sync them using iTunes.
Connect the iPad to the computer and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Photos Tab on the right.
Select the folder from which you want to sync your photos
Click on the Sync Photos Heading.
Click on Apply or Sync in the lower right corner of iTunes

I cannot upload an exel file from lap top to numbers in iPad, message says file not supported. Any help please?

I cannot upload an exel file from lap top to numbers in iPad, message says file not supported. Any help please?

File Sharing lets you transfer files between iPad and your computer. You can share files created with a compatible app and saved in a supported format.
Apps that support file sharing appear in the File Sharing Apps list in iTunes. For each app, the Files list shows the documents that are on iPad. See the app’s documentation for how it shares files; not all apps support this feature.
Connect iPad to your computer.
In iTunes, select iPad in the Devices list, then click Apps at the top of the screen.
In the File Sharing section, select an app from the list on the left.
On the right, select the file you want to transfer, then click “Save to” and choose a destination on your computer.
Transfer a file from your computer to iPad:
Connect iPad to your computer.
In iTunes, select iPad in the Devices list, then click Apps at the top of the screen.
In the File Sharing section, click Add.
Select a file, then click Choose (Mac) or OK (PC).
The file is transferred to your device and can be opened using an app that supports that file type. To transfer more than one file, select each additional file.
Delete a file from iPad: Select the file in the Files list, then tap Delete.
or use dropbox

I am using FCP 7.0.3.on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

.. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update" It's a full version "upgrade" that has to be done using the install discs (or disc images).
-DH

I am having trouble connecting my iPad mini with my lap top that run Xperia

I am having trouble connecting my iPad mini with my lap top that run Xp

Hi..I've had a variant of this problem; my internet was accessible but my devices on wifi could not see the PC on Lan. That meant no iTunes syncing, Airplay from iTunes etc.
Dlink has a strange default setting that isolates Wifi & Wired connections into different subnets.I'm assuming you have DHCP setup on your router and you're PC or MAC has internet access via the same router. Try the following steps to see if this solves the problem for you-
1. Go to Setup -> Local Network and Uncheck the box that says 'Configure the second IP Address and Subnet Mask for LAN' - Hit Apply
2. Go to Wireless -> Wireless Basic and Uncheck 'Enable MultiAP Isolation' - Hit Apply
3. Restart your Router
Let me know if this solves your problem. I've been frustrated by my problem for months & had nearly given up.
J

Whenever I connect my iphone 4 to my lap top i get a message saying digital still camera and the my laptop crashes, it is really frustrating, please help

Whenever I connect my iphone 4 to my lap top i get a message saying digital still camera and the my laptop crashes, it is really frustrating, please help

Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
You may have some problems because Apple has not certified that everything works with Windows 8 yet.

How to connect SCXI or PXI with 6 pin pressure transducer

hello, I am trying to connect ASCX series differential transducer to SCXI or PXI , but my difficulty is that it has 6 pins they are
pin 1 external offst adjustment
pin 2 vs
pin 3 +output
pin 4 ground
pin 5 n/c
pin 6 do not use
my problem is how to connect this sensor to ni 9237..
I am attaching data sheet of that pressure transducer
Attachments:
Acr8.tmp.pdf ‏331 KB

Without spending too much time looking at the documentation, from using previous similar transducers, the primary two connections you are concerned with are the "+output" and the "ground". The other connections are also important, but aren't directly the concern of the Data Acquisition Hardware. The "+output" produces a variable dc voltage relative to the "ground" input that is a product of the applied pressure, with the maximum output voltage, as shown on the chart, indicating maximum pressure. So you would connect those, through a suitably shielded, moderately short length, wire to the "DAQ" analog input. You will also have to supply the transducer with it's required + supply voltage at pin 2 "vs", and the power supplie's negative to the ground. There are whitepapers on this NI site about connecting to data acquistion hardware and I strongly suggest reading them a couple of times as well as anything online you can find. Writing the DAQ software, in LabVIEW or whatever, can be trivial compared to making the correct, low noise, connections to sensor hardware.
I didn't read how the offset adjustment signal is produced or its use, figure it is designed to allow you to "tune out" some signal offset caused by differences between sensors of a type (they will not all have the same "fullscale output" as indicated in the chart).
As you proceed, please keep asking.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

How to connect ECC 5.0 system from EP?

Hi
I want to connect ECC 5.0 system, which is located in a remote SLD, from EP 6.0.
If anyone knows, please post the step by step details .
Thanks and Regards,
Abdul Kareem.S

Hello Abdul,
This should help you
How to connect IDES ECC 5.0 to EP ?
Also check
http://help.sap.com/saphelp_nw04/helpdata/en/77/931440a1c32402e10000000a1550b0/frameset.htm
regards
Mahesh

How To Connect To Oracle 11g Database From Microsoft Excel

Hi All,
I have Windows7 64bit installed in my laptop.
I have Microsoft Excel 2007 installed.
I tried connecting to Oracle database ( This is not a local database).
Navigation used:
Data> From Other Sources > From Data Connection Wizard > Other/Advanced > Next > Microsoft OLE DB Provider For Oracle > OK
Now I get a pop up to enter:
username
password
server
When I enter all the required details I get this error "ORA-06413 CONNECTION NOT OPEN"
Is there no need to give PORT number?
Thanks,
Vishwamber Shetty

Hi,
Did you install oracle client on the machine? Can you do "tnsping <SID>"? Can you connect to DB using sqlplus ?
Try using tnsname for server name.
Connecting to Microsoft Data Sources Through ODBC Connection This shows how to connect using ODBC connection. I think this would be more appropriate.

HT204053 how do i get my music from lap top onto ipad

I have itunes on my lap top and have got a new ipad mini for christmas, how do i get my music from my lap top onto ipad?

You need to read the manual.
Turn on your computer.
Open itunes.
Connect ipad.
Select what you want.
Sync.

I have a new lap top using windows8 I have not been able to transfer my music from my old computer. It is still on my I pod. how can I restore it to the new lap top

I have a neww lap top with winddows 8. I have not been able to transfer my music from my old lap top. I sstill have the music on my Ipod. how can I restore it to the new laptop?

Hey there Brian Lewis 217!
I have an article for you that can help explain a couple of different methods for moving your library to your new computer:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Sound from lap top to tv?

Hello
I have a question Im hoping someone here can answer. I have a HP dv5 and I have my lap top connected to my tv with a HDMI cable.
But when Im running my lap top with Windows 7, I dont get the sound out from my tv, only from the lap top??? but when I run Windows Vista, I get the sound out from the tv. Anyone knows why, and how to fix this?
I have tried to install the drivers for the sound but no luck.
M.V:H.
Cazzman

HI,
cazzman wrote:
Hello
I have a question Im hoping someone here can answer. I have a HP dv5 and I have my lap top connected to my tv with a HDMI cable.
But when Im running my lap top with Windows 7, I dont get the sound out from my tv, only from the lap top??? but when I run Windows Vista, I get the sound out from the tv. Anyone knows why, and how to fix this?
I have tried to install the drivers for the sound but no luck.
M.V:H.
Cazzman
watch this video tutorial and follow along with your own setup.
Enjoy!!
best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to connect to a PXI-1042 from Lap Top

Similar Messages

Maybe you are looking for