How to connect to Agilent DSO7104 through USB connection

I want to connect to Agilent oscilloscope DSO7104 using USB interface.
I have installed labview 8.0, ag6000a Instrument Driver and visa4.6.2.
When I use Example of ag6000a Instrument Driver, the VISA resource name are COM1, COM3 and LPT1.
What should I do to use USB interface?
Thanks.

There should be an inf driver file that comes with the instrument if it supports the USBTMC class.

Similar Messages

How do I get iTunes output through USB port ?

How do I play iTunes through USB Port ?

Have you updated both Airport Express units to the latest firmware?

How to see the existing items through usb lightning

I've jus connected usb to my Ipad 5, using a lightning usb/connector. But nothing appears on ipad. How to find the music, photos, etc which are in the usb?

1. iTunes runs on a Windows computer just fine. You need to install it on a computer and use it to transfer your music and other data over to the iPad.
2. Plugging a USB stick into the camera connection kit will not let you transfer music onto the iPad, onlhotos and in a very specific format.
In short war you are trying to do cannot be do e. You need to install iTunes on your computer. As I said before there is a windows version available.

Just a question about charging through USB. Should only take seconds to answ

Hello everyone.
I have a Zen Micro 5Gb with MTP 2.20.05 Firmware.
How exactly do I charge it through USB? Do I have to lock it before I plug it in or not? Do I turn off the switch manually to save more power and what is the screen meant to look like while charging?
Thanks.

ants wrote:
When manually turning off the Zen Micro via the little switch, there is nothing on the screen. Does that mean it has compltely shut down? Same as the automatic dle shutdown?
It has gone to standby mode. In standby mode it's simply quicker to restart the player, and it will resume where you were last playing.
Also I heard something that happens after 4hrs?
With the ..0 and 2.20.05 firmware the standby period is 4 hours. After 4 hours the player completely shuts down and will take longer to start up, and restart from the beginning of the last track.
With earlier firmware the standby period is 24 hours, but this was causing a noticeable drain on the battery.

I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

You need to turn on Printer Sharing on both the PC and OS X. I can't help you on Vista but in OS X it's System Preferences - Sharing - check the Printer Sharing box.

How do you access files from an external harddrive connected to TC through USB from iPad or windows computer?

How do you access external hard drive data that is connected to TimeCapsule through USB from iPad or knows based computer?

Filebrowser for the iPad does this very well.
FileBrowser - Access files on remote computers for iPhone, iPod ...
Cannot help on Windows, but another PC guy might be able to answer. Some possible clues here:
http://support.apple.com/kb/HT1331

I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705. E

I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705.
Everytime I restart the computer now I get a open with window.
When I select Notepad and open it I get
0x54c Noswal\.android\adb_usb.******
How do i undo that.
If it helps the Article ID:474705 this says at one point
3. Open a shell prompt and enter the following command: echo "0x54c" >> $HOME/.android/adb_usb.******.
I gues that's what's creating the problem.
Please help.

Hi elishacuthbert.
Try disabling the start-up items in your computer to troubleshoot the issue. Follow the steps mentioned below:
Right click on the Taskbar > Task Manager > Start-up > Select the applications > Disable.
Note: If my post answers your question, please mark it as an "Accepted Solution."

TS1373 how can i connect my iphone to computer through usb using windows 8?

how can i connect my iphone to computer through usb using windows 8?

If iTunes is installed, you just connect the iPhone to USB.
http://support.apple.com/kb/HT1386
You can also sync to iTunes using WiFi.

How to connect a Sony Bravia TV to the internet through your Airport network

Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

I have now had a detailed reply from Sony Europe and the way to do this is to:
1.       Press Home on the TV Setup
2.       Use the right and left arrow to select Setting.
3.       Use the up and down to select Network, press Enter.
4.       Select Network Setup.
5.       Select Wireless setup.
6.       Select Scan
7.       Select your network
8.       A new screen will appear asking for entering the security key.
9.       Enter your WPA2 key.
10.   Select Enter.
11.   It will take you back to the same screen asking for entering the
security key.
12.   Press the right arrow.
13.   Select Auto.
14.   Press the right arrow.
15.   Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?

How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?

If you want to listen to the sounds of your drum set, you should use an audio cable and connect it to the computer's line-in, then create a real instrument track.
If you use a Midi/USB interface, you'll have to create a software instrument track and select one of GB's drumsets as the instrument. Hopefully your drumset's midi notes are mapped to the right sounds in GB.

How to connect serial or usb or parallel port

telll me how to connect our application with serial port and how to detect weather the usb is connected or not

Without spending too much time looking at the documentation, from using previous similar transducers, the primary two connections you are concerned with are the "+output" and the "ground". The other connections are also important, but aren't directly the concern of the Data Acquisition Hardware. The "+output" produces a variable dc voltage relative to the "ground" input that is a product of the applied pressure, with the maximum output voltage, as shown on the chart, indicating maximum pressure. So you would connect those, through a suitably shielded, moderately short length, wire to the "DAQ" analog input. You will also have to supply the transducer with it's required + supply voltage at pin 2 "vs", and the power supplie's negative to the ground. There are whitepapers on this NI site about connecting to data acquistion hardware and I strongly suggest reading them a couple of times as well as anything online you can find. Writing the DAQ software, in LabVIEW or whatever, can be trivial compared to making the correct, low noise, connections to sensor hardware.
I didn't read how the offset adjustment signal is produced or its use, figure it is designed to allow you to "tune out" some signal offset caused by differences between sensors of a type (they will not all have the same "fullscale output" as indicated in the chart).
As you proceed, please keep asking.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Internet through USB cable connection

Dear Sir;
How do I connect my phone to the internet through USB cable connection?
i would like if i can connect to the internet through the USB cable, not through W-LAN, so if i can, how , which software i need?
Best Regards

you ahve to install Nokia PC suite then you will be able to connect to internet via your phone over the USB cable.

WHEN I CONNECT, THROUGH USB CABLE, MY IPHONE TO THE MAC BOOK PRO, THE ITUNES APP STOP RUNNING AND I CAN NOT SYNCRONIZE THE IPHONE

I have an iphone 4, iOS 7.1.2
Mac book pro 13in Mid 2012, with OS X VERSION 10.9.4, Processor speed 2.9 Ghz, Memory 8GB 1600MHz DDR3, Intel core i7, Storage capacity 750 GB, 650 GB available.
WHEN I CONNECT, THROUGH USB CABLE, MY IPHONE TO THE MAC BOOK PRO, THE ITUNES APP STOP RUNNING AND I CAN NOT SYNCRONIZE THE IPHONE.

Hello skkmmayer,
That is probably a lot of stuff you do not want on your iPhone. So this can be handled a few different was. For you current situation, you can delete the apps directly on your iPhone by holding on the app until it starts to jiggle and then tap on the X of all the apps that you do not want. The second thing you can do is before you sync with iTunes, look at the app section on your iPhone to know what gets transfer to it and you can deselect items that you do not want. Lastly, if you download content on your iPad and it is a universal app, you can actually download it directly to your iPhone by looking at your past purchases and download it directly from the App Store. Check out the articles below for more information if need further assistance.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
iTunes 11 for Mac: Sync and organize iOS apps
http://support.apple.com/kb/PH12115
Download past purchases
http://support.apple.com/kb/HT2519
Regards,
-Norm G.

TS2634 When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

Well ... the charger is the original charger and just checked and confirmed it is a 5.1V charger. How come? Next is why when i connect my iPad via original usb cable, no response from macbook pro? used to sync with iTunes now totally dead.

I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

You may have to force your iPad into recovery mode in order to restore the device since the update did not complete. This article explains how to do that.
iPad: Unable to update or restore

How to connect to Agilent DSO7104 through USB connection

Similar Messages

Maybe you are looking for