How to connect to component video in projector

How do I use the thunderbolt connection to my component input on projector

VGA is component with separate H&V sync lines. ie VGA is RGBHV (5 wires). So it should be pretty easy to convert from VGA to component (3 wires) (Sync on green). I notice VGA to component leads on ebay. So I would consider a thunderbolt to VGA adapter followed by VGA to component cable.

Similar Messages

How to prevent full screen video in projector

I'm creating a flash presentation as a standalone Projector in full screen mode...
stage.scaleMode = "noScale";
stage.displayState = "fullScreen";
Problem is that I want to have small video players in this full screen Projector, but I DO NOT want the videos to display full screen. I want the videos to display at their preferred size. However, since the stage mode is full screen, the video automatically goes to full screen as well.
How do I prevent this?
Thanks

my_FLVPlayback.fullScreenTakeOver = false
So obvious I could kick myself.
PS - Adobe pay-per-incident technical support = useless. Don't pay some guy who doesn't know the program to look up keywords in the help.

How to connect Macbook pro to a projector with the Mini Display to VGA adapter?

When I connect them nothings happens, the display has a blue screenshot for a few seconds and then get back to the normal view of my desktop. It's the same if I digit "cmd+F2"... Please help me.

The default method for adding a second display is called Mirroring. It uses a lowest-common-denominator approach to choosing display resolution, and often guesses wrong.
System preferences > Displays > ( Arrange) and drag the superimposed representations of the two displays away from each other to invoke "Extended desktop" instead. Then you should be able to set the resolution for the projector to a more reasonable one, and your picture should appear.

How to connect Cam to Video to Satellite L655D?

My daughter has a Toshiba Satellite L655D and wants to get Video footage she has shot on a Sony DCR-HC51 camcorder onto her system. The camera supports DV iLink s400 with a 4 pin IEEE1394 firewire connector. The laptop however doesn't appear to have any firewire connectivity. Does anybody please know of a way to either convert the iLink to USB or any other method for achieving this.
Thanks in advance for any help with this.

Hi buddy,
I dont have experience with firewire connection but I found on some online shops a Firewire to USB converter
That means you can connect the cable to the camera and then via USB plug you can connect it to your computer. This should work
Just check some online shops or get in contact with your local authorized service provider. Im sure they can order such accessories for you. :)

How do I get component video (YPbPr) from my iMac mini display port?

I have a converter cable with dini DP on one end and HDMI on the other, this goes into an HDIM conveter box that converts HDMI to Component. THe TV does not recogize the signal as compatable.

First, what you said is contradictory. You say "can't get a video signal", then say"the Mac wallpaper is broadcast, the mouse pointer is visible". "No video signal" means an absolutely black,blank screen. It sounds like you have plenty of signal.
I am supposing what you are seeing is actually a blank desktop, which is to be expected if your settings are such that you are extending the desktop, instead of mirroring it.
Within the preference panes is a setting that allows you to change this. Open System Preferences, click Displays, and then click Arrangement. You will see that you are extending the desktop. Change that setting.

How do connect iPad wireless to a projector for use in classroom?

I want to be able to utilize my iPad in the classroom as I would an airtablet. Is there a way to do this?

Probably the simplest way, if you want to remain wireless (not be cabled to the projector) is to buy an AppleTV and use Airplay to mirror the iPad to the projector that way. AppleTVs have HDMI outputs, so if your projector has that connection, you just need an HDMI cable - otherwise, you will probably need an HDMI-VGA adaptor.
Matt

Re: Satellite L - How to connect my digital video cam?

I have a Canon digital video camera (bought in 2004). I have been using it to transfer movies onto my other Toshiba laptop, but there is no place to plug in on my new laptop. I did use a iEEE1394 but it doesn't work on this one.
What alternative is there?
Also on turning on the laptop I get a message saying TOSHIBA SERVICE STATION NOT WORKING and proceeds to solve it but nothing happens.
Any suggestions pls.

Hey,
What notebook model you have it exactly? Some notebooks dont have firewire port but if your camera has USB port can use this port. As far as I know all notebooks have USB port
> Also on turning on the laptop I get a message saying TOSHIBA SERVICE STATION NOT WORKING and proceeds to solve it but nothing happens.
You should try to reinstall Service Station, I think this should work. Just download the newest version of Toshiba service station on official Toshiba website and install it:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
But dont forget to remove the old version first before you install the newest one. ;)

Can i use both Component video and HDMI?

Hi guys,
Im wondering if its possible to connect both Component video and HDMI on the ATV?
Its currently connected to HDMI on our main HD TV, however, the apartment we have has a strange setup in which you must send RF signals to a loop back in the main room to reach all other TV's.
We dont have the capital for either another flatscreen TV or a second Apple TV until next year - so currently we've got an older (see 2004) bulk of a CRT TV upstairs and my thought was i could route a signal to the RF loop back from the ATV and use my iphone remote to control what it plays to view upstairs.
For this id need a component to composite/rf convertor which ive found so sending the signal is no problem, but what would happen if i were to connect component cables as well as the HDMI, does the ATV output on both, or priortise the HDMI?

When both types of cable are connected to the tv at the same time, the HDMI connection will be on by default but the component is turned off... and what happens if the source to the HDMI cable is off - eg its plugged in but its got no where to send the signal, would it still not send to the component?.. You mean if the tv was off, same thing, HDMI would take precedence.
Are you sure about this, Winston? I have only 2 component (and 2 HDMI) inputs on my Panasonic HDTV. For this reason I invested in an Audio Authority Component Switcher (Model 1154A) a few years ago. When the TV device arrived I connected it directly to the HDTV via my HDMI-2 HDTV input and also connected the component video and optical audio to the switcher. I have no problem using the HDTV's input selector to switch back and forth between component and HDMI lines. While I admit I cannot split the screen between an HDMI input and anything else for simultaneous viewing, I can leave both lines plugged in and switch between the two lines. In addition, the activity light on the switcher indicates there is a signal present on the switcher even when I am watching the HDMI line. (Of course, this may simply be triggered by the switcher's optical audio signal since I normally watch the TV video via the HDMI line (with HDMI audio muted) and use the optical audio line to drive my receiver's AC3 decoder so I can enjoy 5.1 audio with my latest conversions.) Am, therefore, wondering if the OP may have the same capability and could then simply switch to a different input mode to "de-negotiate" his HDMI connection and allow access to whatever component device he needs as long as he doesn't need simultaneous viewing on both TVs.

No HDMI input for HD-TV; component video doesn't give picture

I just swapped an HD DVR STB, which was connected via component video, for an HD STB. There is no HDMI input on my HD ready TV, so I connected the STB to the TV via the same cables as the tech did when he came out (i.e., I used the component video and component audio connections). I get sound, but no video.
I tried the other connections: S-video gives me a black and white picture,
and the standard coax cable gives me regular video + audio.
I would prefer to use the component video, though. Is this a widespread problem? Is there a solution?
Solved!
Go to Solution.

I'd connect it using the component cables, and then contact tech support and see if they can do a factory reset on the STB. If that fails, they will likely replace it.
====================================================================================
Error exists between keyboard and chair.

How can I connect my ipad2 to a projector to show videos on a screen?

How can I connect my ipad2 to a projector to show videos on a screen?

http://store.apple.com/us/product/MC552ZM/B

How do I play a video through a connection to a projector? I have the connector for the iPad.

how do I play a video through a connection to a projector? I have the connector for the iPad.

Good job Chris!
You can also go into iTunes Preferences, select Playback, and check the Play videos: tick box, then select from the following:
in the main window
in a separate window
full screen
C

How to connect Apple TV (2g) HDMI to HDTV with only component video input.

Trying to connect Apple TV (2g) HDMI to HDTV with only component video input. Can I use a simple cable or do I need a converter box/plug? Is the HDMI signal coming from ATV encrypted or HDCP enabled?
The TV is HD, but only has a component input and not HDMI. Apple TV 2g only has HDMI output.

google component hdmi converter
but they are pretty expensive and may not work at all
and will not work with any DRM material as in movies you reant and maybe netflix and the sports thingy

How can i use apple tv and iTunes movies with component video cables for an older receiver and projector?

i have an older yamaha receiver and projector both without hdmi inputs but component video instead. I would like to get apple tv and start renting movies through iTunes but apple tv only supports hdmi and ive read that iTunes has codes to prevent the use ot analog cables with movies. Is there a way to adapt hdmi to component video for both apple tv and iTunes easily?

Yes, HDMI is the only supported method. Also, with converters you will run into issues with HDCP (which will prevent you from streaming DRM content from iTunes etc) as well as resolution.

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

Need help - connecting Monitor and TV at same time with component video

I have a mac mini, connected via DVI to a monitor - I bought a DVI splitter to connect the monitor to one port and the tv to the other via a DVI to Video adapter, using component video. When I plug in the DVI to Video adapter, the primary monitor loses its connection and I cannot seem to get the TV to recognize the signal - what am I doing wrong?

In my case, the Barco Cine7 CRT projector I would like to connect the new Mini to accepts a pretty wide variety of analog component video formats, but I cannot find a listing of what the Mini supports. Presuming I use a DVI to VGA adapter and then a VGA to RGB cable, can the mini video card output any one of the following analog component formats:
RGBs or RGsB - R, G and B with automatic sync detection between seperate sync (separate composite sync or with separate hor and vert. sync) or sync on green (composite sync)
RGB with tri level sync - R, G and B with separate tri level sync or with tri level sync on green.
Component video - R-Y, Y and B-Y with separate sync or with compositesync.
Component video with tri level sync - R-Y, Y and B-Y with separate tri level sync or with composite tri level sync.

How to connect to component video in projector

Similar Messages

Maybe you are looking for