How to connect to Firefox Sync if operating system was reinstalled?

Can I connect to Firefox Sync if i have the sync key? When I go to Tools>Options>Sync>Set Up Firefox Sync I see only Create new Account and Connect that does not allow me to connect to my account. Thank you.

You can click the link at the bottom: I don't have the device with me.<br />
That will allow you to enter the sync key and other data.

Similar Messages

  • How to connect to firefox sync by sync key?

    Hi.
    Before to re-install Windows, I saved my Firefox Sync Key.
    After windows installation, I can't to access my firefox sync account to get my bookmarks! It says: unknown account, register!
    But I have a KEY, I need my bookmarks back!
    Help me, please, to recovery my bookmarks back!
    Thanks.

    You must have been using a quite old Firefox version if that version still used a distinct Sync key.
    Firefox 29 and later no longer use a specific Sync key, but derive the Sync key from the password of the Firefox Account that you use to log in to this account.
    *https://support.mozilla.org/kb/how-do-i-set-up-firefox-syn
    You would need a Firefox 28 version to connect to an old Sync account that used the Sync key.
    *http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/28.0/

  • How can i update firefox with my operating system mac oxs 10.4.11

    I don't want to update my operating system on my desk top, Firefox messge says I am no longer protected with current version of firefox but the new one isn't compatible with my system. Is there a way round this?

    see here go to 3.6.24 :
    https://support.mozilla.com/en-US/questions/895321
    thank you

  • If I lost my mobile, how can I deactivate firefox sync on it... without it?

    I have Firefox Sync running on my laptop, my desktop and on my smartphone too. If someone stole my phone... how can I stop Firefox Sync only on that device, from my laptop or desktop? I only know how to disable firefox sync on the device I want to disable. But if the device is not with me anymore... What should I do? If I stop using Firefox Sync on my desktop, my laptop will not sync anymore..

    You'll need to change your Sync password and then reconnect things using the new password. For more detail, read here:
    [[I've lost my phone — how do I deactivate Sync?]]

  • How can I revert to a previous operating system on my Ipad

    How can I revert to a previous operating system on my IPad

    Have you checked to see if they have updated their app or are planning to do so?

  • How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

    How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

    Do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • How to connect WDJ to 3rd Party Backend Systems(Oracle).

    Hi Friends,
    How to connect WDJ to 3rd Party Backend Systems(Oracle).
    Please give Step-by-Step Explanation. This is first time I am connect  to Oracle System. Can you give Step-by-Step Explanation.
    Regards
    Vijay Kalluri

    I recommend that you perform the access to Oracle through an EJB and consume this EJB in WebDynpro.
    http://wiki.sdn.sap.com/wiki/display/WDJava/OracleConnectivitywithEJBusingWebDynproApplication
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70d2638c-4b04-2d10-d2a3-992fdf1e3d55
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70929198-0d36-2b10-04b8-84d90fa3df9c
    regards,
    Angelo
    Edited by: Angelo Antonello Borges on Jun 16, 2010 10:52 AM

  • How to Connect to Remote ECC 5.0 System from EP ?

    Hi,
       We are using EP6.0 - located in India, and our client ECC5.0 System is in US. Can anyone please let me know the steps how to connect to Remote ECC 5.0 System?.
    Thanks in advance.
    Krishna Kumar J

    Hi,
    Finally we have successfully got connected the ECC 5.0 system which is located in the remote network thru VPN Connection using the same connecting procedure for the local R/3 System.
    Thanks & Regards
    Krishna Kumar

  • What is the last version update in apple tv and how can i know what is my Operating System

    What is the last version update in apple tv and how can i know what is my Operating System
    i have an apple tv 3
    thx

    6.1
    Settings > General > About > Apple TV Software

  • How, specifically, do I download the latest operating system for my Mac laptop?

    How, specifically, do I download the latest operating system for my Mac laptop?

    Choose About this Mac from the Apple menu and check the processor.
    If it's a Core Duo Mac, click here, install the DVD, and run Software Update.
    If it's a Core 2 Duo or better Mac, follow the Core Duo instructions, open the Mac App Store, and try downloading 10.9. If you get told it's incompatible, go to the online Apple Store and order a download code for Lion 10.7.
    (97036)

  • Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect request. Some functionality might be disabled

    We are receiving following error, while trying to deploy the application on Win Phone emulator. “Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect
    request. Some functionality might be disabled.”
    I have tried all possible ways that we found on blogs. We are still not able to solve this issue

    I have had a lot of issues with the emulator in the past.
    Check out this troubleshooting guide. It might help:
    https://msdn.microsoft.com/en-us/library/windows/apps/jj681694(v=vs.105).aspx
    Also, I find that if I cancel my build/deploy while it is stuck on booting the OS and then wait a short while the phone OS will complete booting, and from that point I can deploy to the emulator. It's a workaround, but it works well for me.
    I need to do that on Windows 10 tech preview, which may or may not be simply an incompatibility with the beta OS.
    I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.

  • Is there a compatability issue with Firefox and Andriod operating system 2.2.3? I can't get Firefox to work. I have tried uninstalling it and it won't download. in English

    Is there a compatability issue with Firefox and Andriod operating system 2.2.3? I can't get Firefox to work. I have tried uninstalling it and it won't download. in English

    Hi Drbobdog, there shouldn't be a compatibility with Android OS 2.2.3. There may be a compatability with the device itself.
    Here are the system requirements:
    https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements
    (also seen here as well : http://www.mozilla.org/en-US/mobile/platforms/ )
    I hope this helps.

  • I am operating a 2009 desktop Mac OsX 10.5.8. How do I upgrade to a current operating system? Do I need to purchase Snow Leopard? I have clicked update my software but see now changes.

    I am operating a 2009 desktop Mac OsX 10.5.8. How do I upgrade to a current operating system? Do I need to purchase Snow Leopard? I have clicked update my software but see now changes.

    You first must upgrade to Snow Leopard. In order to upgrade to Lion, Mountain Lion, or Mavericks you first must upgrade to Snow Leopard. Your model should be able to run Mavericks which you can download for free.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mavericks
    You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
    Upgrading to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks- System Requirements
          Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Remember to do the following before starting the upgrade process:
    Repair the Hard Drive and Permissions
    Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Restart the computer from the Apple menu.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • How to set the classpath in windows operating system

    hi,
    how to set the classpath in window operating system
    i want this help for setting the classpath for the tomcat
    please help me
    thank you
    darshan soni

    Open autoexec.bat in texteditor. This is an example from my autoexec, win me. Running resin
    SET CLASSPATH=c:\jdk1.3.1_01\bin\;c:\andreas\resin\bin\jsdk23.jar;c:\Jimi\JimiProClasses.zip;
    SET PATH=C:\WINDOWS;C:\WINDOWS\COMMAND;c:\jdk1.3.1_01\bin\;c:\andreas\resin\bin\jsdk23.jar;c:\Jimi\JimiProClasses.zip;C:\Program\MtsAndreas

  • How to release a Transport Request at operating system level

    HI,
    How to release a Transport Request at operating system level. Please specify the complete commands along with the pf parameters for TP Export only.......

    <b>tp export <request></b>
    This exports the complete request from the source system. This command starts the export of a request from the operating system level. Only use this command in exceptional cases. The SAP System uses the command expwbo to release requests from CTS transactions
    <b>tp cleanbuffer <sapsid></b>
    This deletes successfully imported change requests from the list of requests that are marked for import into the SAP System <SAPSID>. This function is contained in the commands tp import all <sapsid> and tp put <sapsid> .
    <b>tp delfrombuffer <request> <sapsid></b>
    If the specified request is marked for import into the specified SAP System, this flag is deleted from the import list.
    Reward points if you find this helpful to you.

Maybe you are looking for