How to connect to four Mirage Servers via Round Robin from external over one Mirage Gateway?

Hello all,
we want use Mirage completely from external over the Mirage Gateway.
We have around 4000 Mirage Clients which will use the Gateway and 4 Mirage Servers.
The Gateway is running in the moment only for our external users and is working well.
The way in the moment (if I understand everything right) is that the Clients are connecting from external to the Mirage Gateway and from there to ONE mirage Server.
If it is like that and we configure all Mirage Clients to go over the GW then 4000 Clients are connected to ONE Server is that right?
If yes how can we configure it that all 4 Mirage Servers will be used?
Are 4000 Clients over one GW maybe too much or should that work out?
Thank you for your answers.
Timo

Hi Timo,
I modified my lab and now Mirage is running with two Gateways, two load balancers, two Servers and two storage systems.
The "MirageNetScaler" is one appliance but with two virtual server.
Your design with only one Gateway should also work.
Sorry for my bad paint skills
Regards
Felix

Similar Messages

  • HT204387 how to connect iphone4s to other phones via bluetooth??????

    how to connect iphone4s to other iphones via bluetooth??????

    You can't. It's not and never has been a feature of the phone. Here is a list of what you can connect the phone too using Bluetooth:
    http://support.apple.com/kb/HT3647?viewlocale=en_US&locale=en_US

  • Re install CS5.1: Mac 10.7 failed - upgraded to Mac 10.9, CS 5.1 did not transfer. How do I reinstall - do I delete what I coped from external HD, then reinstall from disks?

    Re install CS5.1??
    Mac 10.7 failed - upgraded to Mac 10.9, CS 5.1 did not transfer from external HD. How do I reinstall - do I delete what I coped from external HD, then reinstall from disks?

    Adobe applications should be installed, not transferred.  If yoiu have the disks then yes, use them.  IF you do not you can download from:
    Download and Installation Help -
    https://helpx.adobe.com/download-install.html

  • Visual Studio 2013 Ultimate - how to connect to multiple TFS Servers?

    Hi Folks,
    I have to use two different Team Foundation servers (different solutions on each one).  I have connected to one TFS server using Team Explorer,  but I cannot work out how to connect to the second server.   I have the settings 'Connect:
    Offline' - but I cannot find the dialog where I can enter the address of the other TFS Server.
    On previous versions of Visual Studio, one could 'Disconnect' and then choose 'Connect to Team Project', however, that option no longer seems to be available. 
    When I try and open the solution that is on the other server I get binding not found errors and cannot checkout the solution.
    Regards
    Andy

    Hi Andy, 
    Thanks for your post.
    In Team Explorer, click Select Team Project… to open the
    Connect to Team Foundation Server dialog to connect to another TFS Server. Please refer to the screenshots under
    Work from Team Explorer section in this document:
    http://msdn.microsoft.com/en-us/library/ms181475.aspx. 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Connect to 11.2 db via SCAN fqdn from Windows client

    I am unable to connect to a 11gr2 database (running on RHEL 5.3) from a Windows client via the SCAN name. I can connect through either of the VIP's but not through the SCAN Load Balancer.
    $ ./srvctl status scan
    SCAN VIP scan1 is enabled
    SCAN VIP scan1 is running on node r02hinnod08pp
    SCAN VIP scan2 is enabled
    SCAN VIP scan2 is running on node r02hinnod09pp
    SCAN VIP scan3 is enabled
    SCAN VIP scan3 is running on node r02hinnod09pp
    $ ./srvctl status scan_listener
    SCAN Listener LISTENER_SCAN1 is enabled
    SCAN listener LISTENER_SCAN1 is running on node r02hinnod08pp
    SCAN Listener LISTENER_SCAN2 is enabled
    SCAN listener LISTENER_SCAN2 is running on node r02hinnod09pp
    SCAN Listener LISTENER_SCAN3 is enabled
    SCAN listener LISTENER_SCAN3 is running on node r02hinnod09pp
    listener.ora
    LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent
    LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))) # line added by Agent
    LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))) # line added by Agent
    LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent
    ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
    ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON # line added by Agent
    ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON # line added by Agent
    ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
    tnsnames.ora
    # tnsnames.ora Network Configuration File: /app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
    # Generated by Oracle configuration tools.
    HEALTH =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = r02hindbs01pp.r02.med.va.gov)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = health.va)
    SCAN is configured as r02hindbs01pp and is a 3 IP round robin. From the Linux server nslookup resolves both from IP and fqdn (or just the prefix)
    VIP's are r02hinclu04 and r02hinclu05 (1 IP each)
    I can connect via either of the VIP's fqdn from the client, but cannot connect via the SCAN fqdn
    Thanks

    Hi,
    I dont know if this solve your problem.
    The SCAN IP and VIP IP work together.
    The connection of clients to the database is not established by SCAN IP but by VIP IP.
    When a SCAN Listener (SCAN VIP) receives a connection request, the SCAN Listener will check for the least loaded instance providing the requested service.
    It will then re-direct the connection request to the local listener on the node where the least loaded instance is running. Subsequently, the client will be given the address of the local listener.
    The local listener In this context, the LOCAL_LISTENER parameter must be considered. The LOCAL_LISTENER parameter should be set to the node-VIP. If you need fully qualified domain names, ensure that LOCAL_LISTENER is set to the fully qualified domain name (e.g. node-VIP.example.com).will finally create the connection to the database instance.
    Read this Oracle Technical Paper.
    http://www.oracle.com/technetwork/database/clustering/overview/scan-129069.pdf
    Regards,
    Levi Pereira
    http://levipereira.wordpress.com

  • How to connect a second monitor/TV to HP ENVY Beats All-In-One

    Hi, I was wondering if anyone could tell me if it is even possible to connect a second monitor to the HP ENVY Beats All-In-One Desktop PC, because I'm trying to connect my TV as the second monitor through HDMI and I've tried everything that I could, but have come up empty handed?
    This question was solved.
    View Solution.

    Hi,
    What is the model/product of your AIO machine ? I many cases, you can't use HDMI port to connect to a TV because it is HDMI IN port. You need USB - HDMI converter/adapter to connect to a TV (or monitor).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to connect Macbook air to tv via airplay ?

    How do I connect my Macbook Air to tv via Apple TV and airplay ?

    Hello wayneharlow
    You should see an AirPlay button in the Menu Bar in the upper right hand corner near the Date and Time. If you do not see it, then you may need to turn it on to show up there, then it is a matter of selecting the Apple TV from that drop down menu. Check out the article below for more information and troubleshooting if needed.
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/ht5404
    Regards,
    -Norm G.

  • How to Connect to Unix OBIEE servers from Remote desk top

    Hi Experts,
    My obiee OBIEE Build/Dev is in Unix servers.I have to connect to Obiee OBIEE Build/Dev server through Remote desk top.
    Please guide me

    There are 2 ways to open repository
    Online Mode:
    hope this helps.
    How to access OBIEE Server LINUX Virtual Machine from Admin Tool Windows?
    Offline Mode:
    If you would like to open your repository in offline mode, then you need to configure xwindows / mapping linux drive to your windows. you would need to install client tools on your laptop and access the repository as if in local system by mapping the drive.
    hope this helps..

  • How to connect iMac G3 to internet via PC with DSL?

    Hi all;
    My cousin currently has a Dell desktop that accesses the internet via DSL (wired, not wireless). They also recently acquired an iMac G3 and a d-link wireless adapter and want to know how they can get internet access to the iMac? I'm assuming all they need to do is purchase a wireless router to connect to the PC and then the iMac can access the router via the d-link adapter? Are there any suggestions as to what type of router is best to use? The room the iMac is in isn't close to the PC, so is there one better for distance?
    Any suggestions would be helpful. Oh, and they're not looking to spend a lot of money. So whatever works for reliable access and distance from the router is what they're looking for.
    Thanks!
    Kristen

    Hey Kristen,
    Well the cheapest way would be to use a wired router and run Cat 5.
    As far as recommendations go I would just Google the Models that you're interested in. I set a client up with a wireless router and bought a D-Link at Office Max since I have an old D-Link that has worked perfectly for 3 years. The one I got was nothing but problems so I switched to a Linksys that was well reviewed and now it's worked perfectly for 3 weeks. Turns out that D-Link had both great and awful reviews. I had been prejudiced against Linksys since I have 4 SR41 wired routers that have failed.
    So you can't go by make only model.
    Richard

  • Airport Extreme: How to connect a Linksys VOIP device via ethernet

    Hi there!
    I am trying to connect Linksys PAP2T device via ethernet to my Aiport Extreme. It gets an address assigned 10.0.1.2 but when I access the device, I am not able to connect to internet. Do I need to key in my network password anywhere?

    Okay, so to answer my own question after considerable sleuthing . . . for anyone else trying to do this:
    Connect your computer to the bridge using an ethernet cable, then open a browser and enter the following address: http://169.254.1.250
    This will take you to a login page: leave the username field blank, enter "admin" in the password.
    You will see the Cisco setup page. I selected manual setup and entered the name of my network and password. I got a progress bar and finally the wireless network light on the bridge started flickering.

  • How to connect iPad to the tv via HDMI cable

    we have a HDMI cable and an adapter for the iPad but it still won't connect, it isn't the cable or the tv as it works with other devices

    I myself made the experience that the adapter set-up causes a lot of trouble. After the last iOS update it stopped working for me and could not be reactivated. I almost tried everything but I couldn't make it work again. I bet that in some years the video-out option over lightning will be cut-off completely. My solution: I got an Apple TV and am now streaming all my content via wifi (found  a good tutorial here). Sold my Lightning adapter on ebay. The Apple TV isn't actually that much more expensive but got some nice features. Works great with my iPad and I should have bought it right away But please, Apple, if you don't want us to use the Lightning adapter then just don't offer it at all...

  • How to connect to an FTP server via Midnight Commander _User_Menu_?

    Hi everyone.
    There's a nifty command that works in MC and makes it connect to an FTP server and display its directories just as if they were local ones: cd ftp://USER_LOGIN@SERVER_NAME. The only thing it asks for is a password, obviously. That's exactly what i'm looking for, theoretically.
    I know it's not really a standard Bash command, because if invoked outside MC, it returns an error (directory not found).
    I got kind of tired of typing it in (or copypasting it) every time, so i thought why not make it automatic? A Bash alias or a shell script wouldn't work, because as i said, it's not really a bash command.
    But what surprised me was that it didn't work as an entry in MC's menu, too.
    Tried to go another way, discovered kftp, apparently it's completely not what i am looking for.
    And i didn't even understand what F9 > Left > FTP Link in MC did. It isn't automatic as well anyway, i have to type everything in manually.
    Can anyone advise how to automate FTP connection in MC, or even in Bash (so that MC just treats it like a regular directory)?
    Big thanks in advance.
    Last edited by kiruch (2010-07-04 20:53:44)

    kiruch wrote:mcsilva, here are the contents of my ~/.netrc file: machine ftp.0fees.net login MYLOGIN password MYPWD
    When i invoke cd ftp://ftp.0fees.net, it tells me bash: cd: ftp://ftp.0fees.net: No such file or directory
    This is not the correct way. You are using bash command line. For this to work it must be:
    # mc cd ftp://ftp.0fees.net
    kiruch wrote:When i invoke it as an entry of MC's menu (what i'm aiming for), i get /tmp/mc-cyril/mcusr6BWdYd: line 2: cd: ftp://ftp.0fees.net: No such file or directory - well, basically the same.
    I don't know what do you mean by "invoke an entry of MC's menu",
    Is this:
    Left->FTP link or Right->FTP link ?
    kiruch wrote:And finally, if i type cd ftp://ftp.0fees.net manually into MC's command prompt, i get a red alert message that says Cannot chdir to "ftp://ftp.0fees.net". Input/output error (5)
    In the first post you said you were able to login with "cd ftp://USER_LOGIN@SERVER_NAME", so MC is working well.
    This error you showed is the same which I have when I type "cd ftp.0fees.net" in the MC command prompt (maybe you typed wrong...)
    Instead, when I try "cd ftp://ftp.0fees.net" the popup error is:  "ftpfs: Login incorrect for user anonymous"
    This is what I expected, because I don't have the username and password and I'm trying a anonymous login.
    Are you sure your typing is right? Please, check your typing and try again.

  • Connecting 2 WLS 7 servers via the Messaging Bridge

    Hi,
              I am trying to use the messaging bridge to post messages received on a
              source JMS queue running in one WLS instance to a destination queue running
              on another target WLS instance. I have followed the instructions in the
              admin guide and performed the following:
              - defined in the source WLS instance 2 JMS bridge destinations - one for the
              source queue and one for the target queue
              - defined the bridge between the 2 destination, using the jms-xa-adp.rar
              - deployed the jmx-xa-adp.rar adapter to the source WLS instance
              - enabled the XA connection factory (had to define a new connection factory
              to do this)
              - made sure that both WLS instances have the system user configured with the
              same password
              When the source WLS instance starts up, the following is logged to the
              console:
              weblogic.jms.common.JMSException: Connection not found
              at
              weblogic.jms.dispatcher.InvocableManager.invocableFind(InvocableManager.java
              :134)
              at
              weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:592)
              at
              weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:275)
              at
              weblogic.jms.client.JMSConnection.createSession(JMSConnection.java:368)
              at
              weblogic.jms.client.JMSXAConnection.createXAQueueSession(JMSXAConnection.jav
              a:75)
              at
              weblogic.jms.adapter.JMSBaseConnection.startInternal(JMSBaseConnection.java:
              257)
              at
              weblogic.jms.adapter.JMSBaseConnection.start(JMSBaseConnection.java:215)
              at
              weblogic.jms.adapter.JMSManagedConnectionFactory.createManagedConnection(JMS
              ManagedConnectionFactory.java:1
              at
              weblogic.connector.common.internal.ConnectionPool.makeResources(ConnectionPo
              ol.java:1002)
              at
              weblogic.connector.common.internal.ConnectionPool.getConnection(ConnectionPo
              ol.java:1777)
              at
              weblogic.connector.common.internal.ConnectionPoolManager.getConnection(Conne
              ctionPoolManager.java:190)
              at
              weblogic.connector.common.internal.ConnectionManagerImpl.allocateConnection(
              ConnectionManagerImpl.java:25)
              at
              weblogic.jms.adapter.JMSBaseConnectionFactory.getTargetConnection(JMSBaseCon
              nectionFactory.java:126)
              at
              weblogic.jms.bridge.internal.MessagingBridge.getConnections(MessagingBridge.
              java:753)
              at
              weblogic.jms.bridge.internal.MessagingBridge.execute(MessagingBridge.java:91
              9)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
              and any messages sent to the source queue just sit there.
              What might I be missing? Am I correct that the configuration of the bridge
              and destinations takes place at the source WLS instance (as this is posting
              the messages to the target WLS) - the documentation seems to me a bit
              ambiguous in this regard.
              Thanks,
              Stanley.
              

    I am afraid that you'll have to enable security interoperability for
              the bridge to work across two domains. Making the password for
              system user is not enough. You have to disable generated credential
              for both domains. For details, please look at the following link:
              http://edocs.bea.com/wls/docs70/adminguide/msgbridge.html#1078380
              Please also note that this requirement has been removed in 8.1 release and
              7.0SP3.
              Thanks
              Dongbo
              Stanley Beamish wrote:
              > "Dongbo Xiao" <[email protected]> wrote in message
              > news:[email protected]...
              > > I suspect that the two WebLogic servers have the same name.
              > > There are some naming restrictions in the WLS configuration.
              > > Please take a look at the following link.
              > > http://e-docs.bea.com/wls/docs70/adminguide/msgbridge.html#1076982
              > >
              > > Dongbo
              >
              > OK, I've changed the name of one of the servers and I can get further. But
              > now I get the following exception on the server that hosts the bridge,
              > relating to permissions. Both servers use the same system password.
              >
              > Thanks,
              > SB
              >
              > java.lang.SecurityException: Invalid Subject: principals=[system,
              > Administrators, Operators, Monitors, Deployers]
              > at
              > weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager
              > .java:993)
              > at
              > weblogic.security.service.RoleManager.getRoles(RoleManager.java:277)
              > at
              > weblogic.security.service.AuthorizationManager.isAccessAllowed(Authorization
              > Manager.java:589)
              > at weblogic.jms.JMSService.checkPermission(JMSService.java:1064)
              > at weblogic.jms.JMSService.checkRecvPermission(JMSService.java:1076)
              > at
              > weblogic.jms.frontend.FESession.consumerCreate(FESession.java:944)
              > at weblogic.jms.frontend.FESession.invoke(FESession.java:2252)
              > at
              > weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:602)
              > at
              > weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:275)
              > at
              > weblogic.jms.client.JMSSession.consumerCreate(JMSSession.java:1592)
              > at
              > weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:1452)
              > at
              > weblogic.jms.client.JMSSession.createReceiver(JMSSession.java:1302)
              > at
              > weblogic.jms.adapter.JMSBaseConnection.setMessageListenerInternal(JMSBaseCon
              > nection.java:931)
              > at
              > weblogic.jms.adapter.JMSBaseConnection.setMessageListener(JMSBaseConnection.
              > java:885)
              > at
              > weblogic.jms.adapter.JMSConnectionHandle.setMessageListener(JMSConnectionHan
              > dle.java:121)
              > at java.lang.reflect.Method.invoke(Native Method)
              > at
              > weblogic.connector.common.internal.ConnectionWrapper.invoke(ConnectionWrappe
              > r.java:101)
              > at $Proxy103.setMessageListener(Unknown Source)
              > at
              > weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge
              > .java:862)
              > at
              > weblogic.jms.bridge.internal.MessagingBridge.execute(MessagingBridge.java:94
              > 2)
              > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
              > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
              >
              > >
              > > Stanley Beamish wrote:
              > >
              > > > Hi,
              > > >
              > > > I am trying to use the messaging bridge to post messages received on a
              > > > source JMS queue running in one WLS instance to a destination queue
              > running
              > > > on another target WLS instance. I have followed the instructions in the
              > > > admin guide and performed the following:
              > > >
              > > > - defined in the source WLS instance 2 JMS bridge destinations - one for
              > the
              > > > source queue and one for the target queue
              > > > - defined the bridge between the 2 destination, using the jms-xa-adp.rar
              > > > - deployed the jmx-xa-adp.rar adapter to the source WLS instance
              > > > - enabled the XA connection factory (had to define a new connection
              > factory
              > > > to do this)
              > > > - made sure that both WLS instances have the system user configured with
              > the
              > > > same password
              > > >
              > > > When the source WLS instance starts up, the following is logged to the
              > > > console:
              > > >
              > > > weblogic.jms.common.JMSException: Connection not found
              > > > at
              > > >
              > weblogic.jms.dispatcher.InvocableManager.invocableFind(InvocableManager.java
              > > > :134)
              > > > at
              > > >
              > weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:592)
              > > > at
              > > >
              > weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:275)
              > > > at
              > > > weblogic.jms.client.JMSConnection.createSession(JMSConnection.java:368)
              > > > at
              > > >
              > weblogic.jms.client.JMSXAConnection.createXAQueueSession(JMSXAConnection.jav
              > > > a:75)
              > > > at
              > > >
              > weblogic.jms.adapter.JMSBaseConnection.startInternal(JMSBaseConnection.java:
              > > > 257)
              > > > at
              > > > weblogic.jms.adapter.JMSBaseConnection.start(JMSBaseConnection.java:215)
              > > > at
              > > >
              > weblogic.jms.adapter.JMSManagedConnectionFactory.createManagedConnection(JMS
              > > > ManagedConnectionFactory.java:1
              > > > )
              > > > at
              > > >
              > weblogic.connector.common.internal.ConnectionPool.makeResources(ConnectionPo
              > > > ol.java:1002)
              > > > at
              > > >
              > weblogic.connector.common.internal.ConnectionPool.getConnection(ConnectionPo
              > > > ol.java:1777)
              > > > at
              > > >
              > weblogic.connector.common.internal.ConnectionPoolManager.getConnection(Conne
              > > > ctionPoolManager.java:190)
              > > > at
              > > >
              > weblogic.connector.common.internal.ConnectionManagerImpl.allocateConnection(
              > > > ConnectionManagerImpl.java:25)
              > > > at
              > > >
              > weblogic.jms.adapter.JMSBaseConnectionFactory.getTargetConnection(JMSBaseCon
              > > > nectionFactory.java:126)
              > > > at
              > > >
              > weblogic.jms.bridge.internal.MessagingBridge.getConnections(MessagingBridge.
              > > > java:753)
              > > > at
              > > >
              > weblogic.jms.bridge.internal.MessagingBridge.execute(MessagingBridge.java:91
              > > > 9)
              > > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
              > > >
              > > > and any messages sent to the source queue just sit there.
              > > >
              > > > What might I be missing? Am I correct that the configuration of the
              > bridge
              > > > and destinations takes place at the source WLS instance (as this is
              > posting
              > > > the messages to the target WLS) - the documentation seems to me a bit
              > > > ambiguous in this regard.
              > > >
              > > > Thanks,
              > > > Stanley.
              > >
              [att1.html]
              

  • How to connect internet modem to wrt54g via LAN cable and make it work??

    I have time warner cable. they gave me this cable modem when I got internet. can I connect this cable modem to my wrt54g using the lan cable? it doesn't have a connection for a coaxial. Is this possible? It should be, right? when I try it, No internet or anything goes through the wrt54g. I have the latest firmware, too. thank you.

    Who is your ISP?
    you can try this procedure:
    CABLE
    Then check if you can get online afterwards...
    "Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

  • How to connect SAP-BW with DataSul via ODBC

    Hi Experts,
    does anyone know the steps to be performed to connect a DataSul-ERP with SAP-BW to extract data. I just know that it should work with ODBC, but honestly I do not know the driver which I need to install nor further details (complete setup).
    Thanks for your help,
    Harald

    Hi Masila,
    this is information related to the eyxact SAP system you want to connect to and can either be extracted from your SAP logon file (saplogon.ini) or by asking your SAP administrator. Do you have SAP GUI (ie. SAP Client) installed on your computer?
    Regards,
    Stratos

Maybe you are looking for