How to connect to itunes with usb to lappy

hii how to connect to itunes using usb n start m iphone?

Post in your native language... the above makes no sense.

Similar Messages

  • My touch shows the connect to itunes with usb on screen however when i try to do so it says it cannot connect because it is locked with a passcode. It will not let me enter the code on the ipod or computer. so i cant do anything. Any ideas?

    I have tried rebooting it. nothing seems to help. it always ends up with the same screen a picture prompting me to hook up via usb to itunes.Then without fail i get an error message. itunes connpt connect to the ipod touch because it is locked with a passcode. you need to enter the passcode on the ipod touch first. unfortunately the touch will not show any other screen but the connect to itunes.

    Connect the iPod touch to your iTunes library in Recovery Mode and restore it to factory setting.  See this article for instructions on getting your device into Recovery Mode.
    http://support.apple.com/kb/ht1808
    B-rock

  • My phone screen stuck on connect to itunes with usb logo

    Finally i thought by now all you over paid geniuses at apple would have made the update smooth. I tried to upgrade to 3.1 and the phone went to stuck mode. I can't use it for anything now? what do I need to do now to get it back to working condition?

    First I understand your frustration I have had a butt load of problems with my phone ok now plug into iTunes and hold the power button and the home button down at the same time till iTunes says that it has found a phone in restore mode follow the on screen prompts to restore your phone I had this same problem and that worked for me they had an emergency meeting a week ago about thease problems hopefully a fix is coming soon I don't think that they want to lose their #1 phone status I know how you feel I pucker every time I go to sync my phone I hope this helps you.

  • Using USB to connect to itunes with iphone. Getting error OXE8000084 with pulsating tone. Have reset passowrd, authorized computer, & repaired itunes when reinstalled. Any suggestions on how to successfully connect?

    Using USB to connect to itunes with iphone.  Getting error OXE8000084 with pulsating tone. Have reset password, authorized computer, & repaired itunes when reinstalled it. Any suggestions on how to successfully connect to itunes and what this error message means?  Thanks

    0X is a Windows Error. Take the time to look over on the right under the "More Like This" and look for ones that have the green checkmark as being solved. You should find answers there.

  • I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.  When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right h

    I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.
    When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right hand corner and you click on it all you get is a done button, when it's in the side bar right click and your only option is eject, left click has no effect. If I go to "file">devices it's as if there are no devices connected.
    I purchased a song with Itunes on the Ipod itself, and it transferred to my library on the computer automatically .
    I have an Iphone 5 and a nano that are still functioning with Itunes thru computer so I'm thinking the issue is with the Ipod touch. I've reset it several times, rebooted it, with no change.
    nothing on the internet has helped, I called tech support and got disconnected. Should I take it to a retail store? I just don't know where to go next, I'm of course willing to pay for tech or repair. looking for suggestions.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705. E

    I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705.
    Everytime I restart the computer now I get a open with window.
    When I select Notepad and open it I get
    0x54c  Noswal\.android\adb_usb.******
    How do i undo that.
    If it helps the Article ID:474705 this says at one point
    3. Open a shell prompt and enter the following command: echo "0x54c" >> $HOME/.android/adb_usb.******.
    I gues that's what's creating the problem.
    Please help.

    Hi elishacuthbert.
    Try disabling the start-up items in your computer to troubleshoot the issue. Follow the steps mentioned below:
    Right click on the Taskbar > Task Manager > Start-up > Select the applications > Disable.
    Note: If my post answers your question, please mark it as an "Accepted Solution."

  • My iPad is disabled and it says to connect to iTunes with my Mac. Its not working. How can I get my iPad to work?

    My iPad is  disabled and it says to connect to ITunes with my Mac. It still is not working.

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Does anyone know how to connect wireless speakers with itunes through airplay?

    Does anyone know how to connect wireless speakers with itunes through airplay? I am not getting the airplay icon in itunes.

    JBL doesn't have any speakers called "Spiral" that I can find, but anyway, perhaps something in this Apple support article on AirPlay troubleshooting will help:
    http://support.apple.com/kb/TS4215
    Regards.

  • Am i able to connect 40 iPads with USB hub(Powered) to iTunes (Windows) and Sync?

    Dear Apple Support,
    I would like to ask about can i connect 40 iPads with (USB Hub(Powered) able to support up to 127 Devices) to iTunes(Windows) and Sync all with same Apps?
    Regards,
    Xentrino

    Okay... I've just found the solution. It's really simple, just plug the phone to the MacBook, fire up iTunes, check the "Sync Photos from iPhoto" option, make sure all the other options are not checked, and just sync. Voila! my iPhoto library is now in the palm of my hand.

  • Can i send my music from mac to iphone without connect my iphone with usb ?

    can i send my music from mac to my iphone without connect my iphone with usb ?

    iOS: How to transfer or sync content to your computer - http://support.apple.com/kb/HT1296 > Wi-Fi syncing
    How to Use Wireless Sync in iOS 5 - http://www.pcworld.com/article/242242/how_to_use_wireless_sync_in_ios_5.html
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing - http://support.apple.com/kb/TS4062

  • How to use my itunes with a new pc

    how to use my itunes with a new pc?

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
    tt2

  • Ipod was disabelled and needed connecting to itunes, with countless attempts  nothing happend therefore performed as reset, now instead of turning on and off,  ipod displays connect to itunes but is not recognised by computer nor will it connect to itunes

    ipod was disabelled and needed connecting to itunes, with countless attempts  nothing happend therefore performed as reset, now instead of turning on and off,  ipod displays connect to itunes but is not recognised by computer nor will it connect to itunes, try enabelling for restore but only connec to itunes is shown consistently

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • When I connect my iPad with usb to my mac the iPad gives me a "blinking" message asking to trust the computer.  Problem is it does not give me enough time to select yes.  What am I doing wrong?  Help!

    When I connect my iPad with usb to my mac the iPad gives me a "blinking" message asking to trust the computer.  Problem is it does not give me enough time to select yes.  What am I doing wrong?  Help!

    Everything that you sync to the iPad is done through iTunes or from downloading from the cloud if they are iTunes purchases or through iTunes Match, if subscribed.
    It is also not possible to transfer music or certain other files though Bluetooth between other iPhones or Android devices. You can transfer between iOS devices, pictures through devices that are Airdrop capable.

  • How to connect Desktop Software with BES ?

    Hi,
     I have installed latest BB Desktop Software on a system other than BES (4.1.6). Also installed BB simulator 4.2.2 (8830) on same system. I connected the Simulator to Desktop software successfully using USB, but can't connect it with BES server (installed on separate system) .
    Please tell me how to connect Desktop software with BES ? 
    regards,
    Laeeq 
    Message Edited by laeeq on 02-11-2009 06:37 PM
    Regards,
    Laeeq Qazi
    Team Lead (Exchange+BES) www.HostingController.com

    Hi William,
    Please make sure that Forward printing devices is checked. This allows you to use the local printer connects to your Mac in a remote desktop session.
    Getting Started with Remote Desktop Client on Mac
    http://technet.microsoft.com/library/dn473012
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • TS1286 Cannot connect to internet with USB

    I am a new user of Ipod touch 5th gen 32 gig I cannot connect to internet with usb?

    Hi bikernblondie,
    When you say that you're trying to connect to the internet with USB, do you mean that you're trying to connect your iPod to the internet so that you can surf the internet with a browser on your iPod, or that you're trying to connect your iPod to your computer so that you can sync it with iTunes and bring over songs, movies, apps, etc.?
    - O.C.

Maybe you are looking for