How to connect to Linksys Wireless Print Server (WPS54GU2) from WIndows 7

I tried the Print Server Utility that was loaded from the WPS54GU2 user install disk. Ended up with an AddPort error.
Went ahead and created local printer for printer I was trying to get to (Epson Color Stylus 400). Did a "Printer Properties" on the printer after it is was created and clicked on the "Port" tab. Clicked on the "Add Port" button and selected "Standard TCP/IP Port" from list. Clicked on "New Port" . Wizard came up and clicked "Next" on this screen. I typed in the IP address of my Print Server (with no Port Name) and let it search for a while and it eventually failed. A screen came up requesting "additional port information" so I clicked on the "Custom" button and then clicked on the"Settings" button. Here I typed in the correct port name (which in my case was like LKxxxxxx where the x's are numerics). The IP address is already filed in. I checked the LPR button and made up a Queue Name and typed it into the Queue Name text box.
After clicking OK I tried printing to the printer and everything seemed to work correctly.
Message Edited by bionic_surfer on 11-14-2009 10:21 AM
Message Edited by bionic_surfer on 11-14-2009 10:21 AM

Corleone
I have the same issue as I have a new Windows 7 machine that is hardwired to my Linksys WPS54G. This is my main office PC and I have other computers throughout the house that are connected wirelessly to the WPS54G. I've tried to create a new port for printing based on the posts from other users but it still won't work. I've run the Linksys configuration and my PC sees the printer server. Am I missing a step?
Here is what I've done
Go to ports
Add new port
Standard TCP/IP Port
Click new port (Wizard comes up)
Enter printer name and IP address ( I enter my IP address for the Print Server 192.168.1.x)- Port name is same as IP Address (does this matter?)
Go to custom settings and set for LPR with Queue name of LP1 (or should it be L1?)
LPR Byte count box checked
Click next and finish
Do I need to restart my computer?
What am I missing
Thank you

Similar Messages

Resolution - Printing HP LaserJet & Linksys Wireless Print Server WPS54GU2

Hello Guys:
After trying to figure out for 10 days and calling HP, Applet and Linksys support, i finally am able to print to my printer.
I have iMac running Tiger 10.4.8. I have a HP LaserJet 1012 Printer connected in a USB Port to the Wireless Print Server WPS54GU2. This is what I did to get it working.
First install the following drivers:
1) Go to http://www.linuxprinting.org/macosx/hpijs/ and download hpijs-foomatic-2.0.2.ppc.dmg and espgs-7.07.1.ppc.dmg file. Install hpijs first and espgs second.
2) After that Go to Server Preferences, Double click on Print/Fax.
3) Click on the "+" sign, select Line Printer Daemon - LPD
4) In the Address field, enter the IP address of your print server.
5) In the Queue name (This is very important). I used L2 for USB. You can try P1, L1 as well. Not sure how you have connected to the print server. For me L2 worked. I had tried using L1 and P1 and it didn't work for me.
6) The Name field should automatically be populated.
7) In the Print Using, select HP and then select "HP LaserJet 1012 Foomatic/hpijs" as the printer or whatever driver you have for your printer.
8) Click on Add
And now open up text edit or something and you should be able to print.
let me know if there are any questions.

Try Repairing permissions (Disk Utility). Then restart, then add again.
What do you mean by the printer doesn't show up - the driver (print using:)?
You can try the generic HP Photosmart P1100 Gimp-Print driver that comes in OS X.

Sharing Linksys Wireless Print Server with MAC and PC - How to do?

I have lost the capability to share a printer on my network by using the Linksys Wireless Print Server-model number WPS54G -V2. Prior to having to return my previous Print Server on an RMA, I was able to use the MAC and PCs on my network. I have a PowerGook G4 with MacOS X 10.4.10. I also have a Airport Extreme Base Station V5.6. The printer on the network that is being shared is an Epson Stylus Photo 820. Recently, when trying to reconfigure the network, I updated the software on the Airport Extreme...so I think after that, I am no longer able to share this printer using current network configuration. As information, I will share how I got the network to share the printer BEFORE I had to replace the previous Print Server and BEFORE I updated the Airport Extreme. Please see this link:
http://www.macosxhints.com/article.php?story=20050406151311940
Even though this was for a different type of Print Server, this worked for me.
When reconfiguring the new Print Server, I contacted Linksys...as had some difficulty until I found out how to assign a static IP to the new Print Server. When trying to talk to them about the Mac issue, and sharing the printer, they shared this link with me...which may be helpful to some, but I found that this does not work for me...
http://www.macosxhints.com/article.php?story=20060404021600193
I have been trying to work through the issue, but feel I may now have some compatibility issues between the Airport Extreme and the Epson printer.
Further details are that I use 10.0.1.78 for the assigned IP address for the Print server. My router (which is the Airport address) is 10.0.1.1. I have tried IPP printing option, LPD printing option...and IPP printing at least returns a status on the Print Server as "printing" as opposed to "idle". I have checked the Print status on the Mac, and I have received two (2) different error messages as to why the print job failed. They are:
"the process "picwpstops" stopped unexpectedly with status 1"
and
"the process "rastertoprinter" stopped unexpectedly with status 1"
The latter happens when I follow the instructions on the second link I attached on this topic...with the only change being that I select IPP printing as opposed to LPD printing.
Anyone that has any insight into HOW to configure the mysterious settings for Mac OS printing so that it can be compatible with a Wireless Print Server, please feel free to comment. In the meantime, I am thinking that the links above could help some people...just not me at this point given my current configuration and versions of software/firmware and perhaps the printer I am using.
Greatly appreciate your consideration, and any suggestions to anyone that might understand what these error messages mean when checking the printer status after sending a file for printing.
Thank you

1. No, you don't have to make a bootable clone.
2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
FAT32 is slower for read/write on the Mac than using Mac formatting.
Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
Mac OS X 10.5 Help- Sharing with Windows computers

Printing to a Linksys Wireless Print Server with my MAC

have a small home network using an ATT DSL modem-router. I have several PCs hardwired to the router and 1 older MAC wireless. I have a MAC G4 laptop and a Dell laptop (my wife's) also connected wirelessly and all work well. I have added a Linksys wireless print server today and am able to get my wife's laptop to print easily and reliable as does the hardwired Dell. What I need is to get my MAC laptop to print wirelessly as well. I have tried all the options in the printer set-up but it does not see the print server. Linksys does not support MAC and there are no MAC drivers for the print server to download that I know of. Does anyone know of a fix on how I could configure this equipment so I can print wirelessly from my MAC laptop. Or perhaps bypass the print server and print using the modem-router and the same printer. I would appreciate any suggestions one could lend. Thanks much.
Power Book G4 17" Mac OS X (10.4.10) Virtual PC capable

Looking at figure 8-5 and the text to its left in the User Guide.
Click Add in Printer Setup, then select IP printer > IPP. Enter the print server's IP address AND queue name P1. With that info filled in OS X has all it needs to address the printer on the print server.
Download and install the CUPS driver version 1.1.0, and choose it when you Add in Printer Setup.

Linksys Wireless Print Server & HP Printer

Does anyone know if I can use my Linksys wireless print server which is attached to my HP All-in-One Inkjet printer for printing on my MacBook Pro? When I go to add a printer, nothing is detected - neither the HP or the Print Server.

I am facing the same problem too, except that my printer is a CANON. I can't seem to see the printer over the wireless network. However, when I connect the printer hardwired to my MBP, everything works fine and I am able to print normally.

Linksys Wireless Print server and my Mac G4

I just set up my linksys wireless print server and it's printing from my PC just fine - not so on my G4. My printer is a Canon Pixma ip5200, and the appropriate drivers etc are installed.
I know the IP address and have tried setting up the printer via IPP (and pinged it from the mac successfully). Just no success printing. The printer utility looks like it is printing to the printer but nothing comes out.
Any ideas?

You won't be able to get this to work.
The Canon printer drivers won't allow you to connect to and print to a Canon printer attached to a wireless print server.
There is no solution, there is no way that this can work
You have three solutions.
Replace the Canon printer with another printer for which the drivers will work.
Replace the Canon printer with a networked Canon printer such as the iP4000r (or any other network printer) in which case you won't need the print server
Connect the Canon printer directly via USB to the computer to print.
iFelix

Printing through Linksys Wireless Print Server

Ok.. Here is the question.
I have a Linksys Wireless Print Server (WPSM54G) which is connected to a Canon MX700. In windows this works great. However I cannot get OS X (10.5.2) to print to the printer.
The print server (with firmware update 1017) supports IPP, LPR, and some other printing protocols.
I have also pulled down the CUPS driver from Canon's site for the printer.
At this point I am stuck in getting this working.
Has anyone out there successfully gotten this wireless print server to work with OS X?
If so, what is the trick?
Thanks.

I hope you're right about supporting the industry-standard protocols after a firmware update - because this print server didn't support those before...
With the industry-standard protocols IPP and LPD, a queue name is a part of the address to direct data to the port on the print server. Do you know the queue name (also called port name in some documents) for this print server, so you can enter it in print & fax prefs?

How to set up standalone wireless print server

I need step-by-step instructions on to set up a KonicaMinolta bizhub multifunction printer to print wirelessly from various Macs. In other words, it would not be hooked up to the internet or my wireless network. I understand this can be done with an AirPort Express or AirPort Extreme. I tried it with a Linksys WPSM54G wireless print server without success. I'd like to try the AirPort Express, but so far haven't been able to get it to work.
How do I configure my AExp to operate as a print server? How should I have it connected when I do the configuration?
How do I find the print server's IP address?
When I plug in the AExp and connect it to the printer via USB, the AExp flashes amber and never turns green (and therefore never connects with the MacBook).
If I successfully set up the print server as a separate network, can I be connected to the printer and my wireless network at the same time? Or do I need to switch back and forth?
If I'm accessing the internet via Ethernet, can I simultaneously access the printer via AirPort?
Any help will be greatly appreciated.

How do I configure my AExp to operate as a print server?
The AirPort Express Base Station (AX) or AirPort Extreme Base Station (AEBS) can only operate as a "print" server if the printer is attached to its USB port. Ethernet printers would require their own print server service if connected by Ethernet to either router.
How should I have it connected when I do the configuration?
Neither router would need a WAN port connection as both can provide a stand-alone wireless network. For a USB printer, it would need to be connected to the respective router's USB port.
How do I find the print server's IP address?
This would be the AirPort's LAN IP address. The default is: 10.0.1.1
When I plug in the AExp and connect it to the printer via USB, the AExp flashes amber and never turns green (and therefore never connects with the MacBook).
The flashing amber indicates that the AX has configuration issue. If you temporarily connect your MacBook directly to the AX's Ethernet port, and then, run the AirPort Utility, you can find out what the issue(s) is(are).
If I successfully set up the print server as a separate network, can I be connected to the printer and my wireless network at the same time? Or do I need to switch back and forth?
No, you would have to switch wireless networks. One way around this, is to have the AX configured to "Join a wireless network." This mode was specifically designed to allow the AX to perform as a wireless client and simultaneously provide both print sharing and iTunes streaming to network clients.
If I'm accessing the internet via Ethernet, can I simultaneously access the printer via AirPort?
Potentially, but your computer and the printer will be on separate broadcast domains/subnets.

Linksys Wireless Print server WPS54G

Has anyone tried the Linksys WPS54G wireless print server to work on their Macbook? I don't use a wireless for general networking at home, can I still use the Wireless-G connection in ad-hoc mode to print using Macs?

You need to consider the driver for your printer first!!!!
Network printing/Windows printing only works with a driver that was meant for network printing. To use the OS X built-in CUPS network choices, you need a CUPS driver. For postscript printers, it's not an issue, because postscript is the native output of OS X, and can easily be routed to the various choices in Printer Setup.
Non-postscript printers are Very Different. Except for Brother, no manufacturer has provided CUPS drivers. Instead, what you get are Carbonized, OS9 legacy drivers, that have the comm protocol written into the driver (mostly USB). They can only print via local connection.
**Exception - when printing via an Airport/Bonjour enabled print server, where the software does a port redirection, USB output from the Mac gets routed to the USB port on Airport Express/Extreme.
Linksys doesn't do this Apple-only USB port redirection...

Mac and Linksys Wireless Print Server

I have a wireless print server connected to an HP 940C that I cannot get my iMac to print to. It finds it on the network, but is not printing. Any ideas??

It is probably a driver issue.
It may work with a third-party driver such as the HPIJS drivers or the Gimp-Print drivers, but this is not the case with all printers.
Though for 10.3, this guide may also help.
Printing to a network ethernet printer (which has an IP address) from a Mac running OS 10.3.x
http://www.ifelix.co.uk/tech/3005.html
iFelix

How to connect to my wireless printer to a PC workgroup?

It wont let me connect to the workgroup

Im trying to connect to my wireless printer from my MacBook pro, that is connected to my home P.C. **

How to connect external database(Ex:SQL Server/Tivoli) from ABAP Webdynpro

Hi,
Any one have idea how to connect external database like SQL Server/Tivoli to access tables from WebDynPro ABAP.
Please point to me some links if you have
Thanks
Praveen

Hi,
Please check out this link -
FETCH DATA FROM ORACLE DATABASE USING Web Dynpro
Regards,
Lekha.

Connecting to a wireless print server, please help!!!

i have a canon mp500 connected to a network through a wireless printserver and wireless router. the printer works when directly connected to my macbook, but not when connected to the print server. i contacted linksys and they sent a docment on how to set the printer up using it's ip address. still didn't work (the instructions were for 10.1 and 10.2). i have downloaded and installed the current mac os x drivers from the canon website with no luck. please help

I'm no expert, but I was able setup HP printer connected wirelessly to AEBS by using Apple's Printer Setup Utility and Bonjour. I was, however, able to install the HP drivers using the software that came with the printer, but it sounds like you could not do so with Canon?
Anyway, here are Apple's help files for adding an IP printer:
"Connecting to an IP printer
An IP printer is a network printer that uses TCP/IP protocols (such as LPD/LPR, IPP, or Socket or Jet Direct) to communicate with your computer. If the IP printer you want to use is not listed when you print, you can add it to your list of available printers.
To add an IP printer, you need to know its IP address or DNS name. See your network administrator for assistance.
Open the document to print, and choose File > Print.
Choose Add Printer from the Printer pop-up menu, and click IP Printer in the dialog that appears.
Choose the appropriate printing protocol from the Protocol pop-up menu.
Type the IP address or DNS name for the printer in the Address field.
If your printer requires it, type the queue name for your printer in the Queue Name field. If you don't know the queue name, see your network administrator for assistance.
Enter a name and location for the printer, so you can identify it in the Printer pop-up menu.
If the Print Using pop-up menu does not display the name of your printer's model, choose the item appropriate for your printer from the Print Using pop-up menu, and then select your printer in the Model Name list.
Click Add.
Usually, your computer can detect whether a printer has special accessories installed, such as additional paper trays, extra memory, or a duplex unit. If it can't, a dialog appears that lets you specify them. Make sure the settings in that dialog accurately reflect your printer's installed accessories so you can take full advantage of them."

HP Director software won't work since I installed Linksys Wireless Print Server

I have an HP 5510 Office Jet all in one. It comes with bundled software called HP Director that enables scanning, printing, and faxing. The software worked fine while I had the printer connected to my pc with a USB cable.
To give myself flexibility I installed a WPSM54G Linksys Wireless G Printserver. There is no direct connection between my printer and pc anymore.
Printing still works fine. This is being handled by the Linksys software.
The HP Director no longer can find the printer. When I try to scan (for example) using HP Director, I get a message that "an error occurred communicating with the printing device...". It presumably is looking for a direct USB connection, and not finding one.
I can't find a fix on the HP site, but I imagine there must be one. Wireless print servers have been around for quite a while. Is there a download that will solve this problem?
Thanks for your help.

kts0347 wrote:
...My printer interfaces wirelessly through my print server. So, HP Director doesn't see the printer, and fails to run the tasks it is offered for - scanning, photos, faxes....
Exactly my point. These services: scanning, photos and faxes will never work through a print server.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Issues with Deskjet 5650 and Linksys wireless print server.

I have a iMac DP 1.8, a iMac G3 700 mhz running Tiger and a Toshiba laptop running XP and I am on a wireless network. I use a Linksys WRT54G router for the wireless and I am using a Linksys WPS54G wireless printserver to connect an HP Deskjet 5650 to the network. This was all working fine for the past 2 months until Monday evening when the Mac's lost connection to the printer. However the Toshiba can print to it just fine.
I cannot for the life of me figure out what happened. The iMac DP recently had a security update for intel installed this past Monday, but no updates have been installed on the G3 iMac. I have contacted Apple, HP and Linksys and they have been no help at all. Apple says it's a Linksys issue, Linksys says it's Apple issue and HP is just cluless. I would appreciate any assistance offered.
Thanks
iMac DP 1.8, iMac G3 700mhz Mac OS X (10.4.5) Linksys wireless router WRT54G, Linksys wireless printeserver WPS54G

Paul, I am amazed you were ever able to print via the Linksys wireless server on your mac. I have the identical router and print server, and only the Windows PC's on my wireless network have been able to share the printer on that wireless server. I've been unable to find a driver for my iMac, and could never get the iMac to find the server. Finally gave up and bought an HP 2600n color laser and connected it directly to the iMac via USB. You're right about lack of help from Linksys. There is an Apple folder under "unsupported" on the print server installation CD, but there's nothing helpful in there.
iMac (Intel) Mac OS X (10.4.5)
iMac (Intel) Mac OS X (10.4.5)

How to connect to Linksys Wireless Print Server (WPS54GU2) from WIndows 7

Similar Messages

Maybe you are looking for