How to connect to Mercator from SAP R/3 System?

Hi,
I would like to know what are the cofig. steps that one has to maintain in order to connect to Mercator.
Here I am using a SAP 4.0 B system and i need to connect to Mercator.
I would like to know the type of RFC used and the type of port used.
If the type of Port is CPI-C port, let me know the config. data that need to entered here to created the port.
Regards,
Raghuram.

Similar Messages

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

How to load master data from SAP R/3 system like Customer master...........

How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............

Hi Bramha,
Check ...........
Re: master data loading in BI 7.0
/message/4708129#4708129 [original link is broken]
Re: Master data loading.
Regards,
Vijay.

Connection from SAP to our systems involving 2 saprouters

connection from SAP to our systems involving 2 saprouters
we have 1 saprouter inside a dmz and another for connecting to our systems.
we are guessing that this is possible
SAP (sapserv2) -
SNC----> saprouter1 (DMZ, SNC connection) -
> saprouter2 (P * * 3200) ---> SAP1, SAP2...
But how could we do that?
How can we let SAP know that they need to connect to 2 saprouters instead of 1?
The "Mantain System Data" in sap service marketplace only lets us introduce 1 saprouter.
And how should be the saproutettab of the 2 saprouters?
saprouter1:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 000.00.00.00 *
P * saprouter2 3299
saprouter2:
P * * 3200
P * * 3600
is that possible?
Many thanks !!

Hi
As far as my experience goes with this you have to maintain both router information in oss1 tcode
Also mention second router on the second router tab on the SMP data
I hope it should work with that as it will automatically create router table

How to Trigger an IDOC from SAP R/3 to two systems at a time

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.

Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas

How to retrieve the data from SAP-BAPI by using VB Code

Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
    oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
    oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
    oZEmp_Header.Value("ADDR1") = txtAddr1.Text
    oZEmp_Header.Value("ADDR2") = txtAddr2.Text
    oZEmp_Header.Value("CITY") = txtCity.Text
    oZEmp_Header.Value("PHONE") = txtPhone.Text
    boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
    x = oreturn.Value("Message")
    If x = "" Then
        MsgBox "Transaction Completed!..."
    Else
        MsgBox x
    End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.

I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
    SapConnection.logoff
    SAPLOGIN = False
Exit Sub
LogoutFehler:
    If Err.Number = 91 Then
        Exit Sub
    Else
        MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
    End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
   Set FunctionCtrl = CreateObject("SAP.Functions")
   Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
   SapConnection.Client = "010"
   SapConnection.Language = "EN"
   SapConnection.System = "PR1"
   SapConnection.SystemNumber = "00"
   'SapConnection.Password = ""
   SapConnection.GroupName = "PR1"
   SapConnection.HostName = "168.9.25.120"
   SapConnection.MessageServer = "168.9.25.120"
     If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
         Set SapConnection = Nothing
         DoCmd.Hourglass False
         MsgBox "No connection to SAP R/3 !"
         SAPLOGIN = False
         SAPLOG = False
         Exit Function
      End If
    SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
    If Not SAPLOGIN Then
        If Not SAPLOG() Then
            MsgBox "No connection to SAP !", 16
            SAPLOGOUT
            Exit Function
        End If
    End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
    If func1.exception <> "" Then
        MsgBox "Communication Error with RFC " & func1.exception
    End If
    DoCmd.Hourglass False
    SAPLOGOUT
    Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
    MatDescr = "PART NO. NOT FOUND"
End If
End Function

How to store multiple files from SAp in to Application server?

Hi Guys,
             Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
            Any Logic or Code for how to do is welcomed.
                    plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
        DIRNAME(200)     TYPE c, " name of directory.
        sp_name(100)     TYPE c," name of entry. (may end with *)
      END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
        dirname(75) TYPE c,            " name of directory.
        aliass(75) TYPE c,            " alias for directory.
        svrname(75) TYPE c,            " svr where directory is availabl
        sp_name(75) TYPE c,            " name of entry. (may end with *)
        sp_cs(10)   TYPE c,            " ContainsString pattern for name
      END OF isearchpoints.
data: l_file type filetable.
data: l_rc   type i.
data: itab   type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat      type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
   FILENAME                      = in_file
   "FILETYPE                      = 'BIN'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = ' '
   HEADER_LENGTH                 = 0
   READ_BY_LINE                  = 'X'
   DAT_MODE                      = ' '
TABLES
    DATA_TAB                     = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
     TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
    move g_tmp_file_path to in_file.
    h_destin = ''.
    SPLIT g_tmp_file_path at '\' into table itab.
    loop at itab into g_tmp_file_path.
      h_destin = g_tmp_file_path.
    endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies    TYPE TABLE OF dfies.
DATA: lwa_dfies   TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      tabname    = '/BI0/PCO_AREA'
      lfieldname = 'CO_AREA'
    IMPORTING
      dfies_wa   = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT   = 'Destination directory'.
lwa_dfies-LENG      = 100.
lwa_dfies-INTLEN    = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD = 'SP_NAME'
      DYNPPROG = SY-REPID
      DYNPNR = SY-DYNNR
      DYNPROFIELD = 'destin'
      VALUE_ORG = 'S'
    TABLES
      VALUE_TAB = searchpoints
      FIELD_TAB = lt_dfies
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS = 3.
*&      Form select_input_file_name
*       text
form select_input_file_name.
* call function 'F4_FILENAME'
*       exporting
*            program_name = sy-repid
*            dynpro_number = sy-dynnr
*            field_name    = 'PATH'
*       importing
*            file_name     = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    "select_input_file_name
*&      Form WRITE_DB_HOME
*       Write DB home directory
*       no parameters
FORM write_db_home.
CASE sy-dbsys(3).
    WHEN 'ORA'.
      CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
                         ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ORAHOME',       30 searchpoints-dirname.
      MOVE: 'DIR_ORAHOME'        TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'ADA'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ADA_DBROOT',    30 searchpoints-dirname.
      MOVE: 'DIR_ADA_DBROOT'     TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'INF'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
      MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
      APPEND searchpoints..
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'DB6'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
                      ID 'VALUE' FIELD searchpoints-dirname.
      IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
*        PERFORM flip_flop(rsora000) USING cflag.
*        WRITE: / 'DIR_DB2_HOME',    30 searchpoints-dirname.
        MOVE: 'DIR_DB2_HOME'       TO searchpoints-sp_name.
        APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
      ELSE.
        EXIT.
      ENDIF.
    WHEN OTHERS.
      EXIT.
ENDCASE.
ENDFORM.                    " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = sy-uname.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = 'all'.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL'         TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
    PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING'         TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF'           TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG'          TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN'           TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
    DATA: windir_path(64), programfiles_path(64).
*   hoping that ProgramFiles is set in service user environment
    CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
                    ID 'VALUE' FIELD programfiles_path.
    IF programfiles_path IS INITIAL.
*     %ProgramFiles% not available. guess from windir
      CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
                      ID 'VALUE' FIELD windir_path.
*     e.g. S:\WINDOWS ==> S:\Program Files
      CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
    ENDIF.
    CONCATENATE programfiles_path '\SAP\hostctrl'
                                             INTO searchpoints-dirname.
ELSE.
*   on UNIX, the path is hard coded
    searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
                     ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
    IF sy-opsys = 'Windows NT'.
      searchpoints-dirname = '.\'.
    ELSE.
      searchpoints-dirname = './'.
    ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP'        TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS'          TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB'          TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
                     ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
    h_ind = sy-tabix.
    IF searchpoints-sp_name IS INITIAL.
      DELETE searchpoints INDEX h_ind.
    ENDIF.
ENDLOOP.
ENDFORM.

How to get purchasing data from SAP R/3 to OWB (Oracle warehouse builder).

Hi,
My name is Pavan Tata. I work as a SAP BW developer. Here is the situation at my client place. Client decided to retire BW system and wants to replace with OWB(Oracle warehouse). In all this currently we have purhchasing application in BW production system and wants to move this application to OWB for the same type of reporting what they are getting currently.
Here is my question:
How to get purchasing data from SAP R/3 to OWB(Warehouse) with initial full loads and deltas mechanism in the same way as we do in BW.
Please help on this, also send me any documentation about this if you have.
Thanks,
Pavan.

Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
    strtab
USING
    'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*&      Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
                    USING ittab TYPE any.
DATA:
    h_zaehler TYPE i,
    line_str TYPE string,
    l_tabellenname(10) TYPE c,
    l_arbeitsbereichsname(10) TYPE c,
    h_string TYPE string,
    h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
                 <l_arbeits> TYPE ANY,
                 <feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
    CLEAR: h_zaehler, line_str.
    line_str = ittab.
    DO.
      ADD 1 TO h_zaehler.
      ASSIGN COMPONENT h_zaehler OF
        STRUCTURE <l_arbeits> TO <feldzeiger>.
      IF sy-subrc <> 0. EXIT. ENDIF.
      WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED.          "#EC *
      h_string = h_char.
      CONCATENATE line_str separator h_string INTO line_str.
    ENDDO.
    APPEND line_str TO strtab.
ENDLOOP.
ENDFORM.                    "data_to_string

How to extract PS data from sap r/3 to bw

Hi,
How to extract PS data from sap r/3 to bw
PS data like plans,budget,accurals&commitmnets
can any one help me regarding this..
Thanks in Advance,
Shankar.

HI sankar,
you can refer the belkow link to find the details on the relevant extractors and infoproviders
http://help.sap.com/erp2005_ehp_04/helpdata/EN/17/416d030524064cb2b8d58ffb306f3a/frameset.htm
Regards,
Sathya

How to get internal table from SAP Data Provider C#

Hello.
ABAP:
   DATA: lt_t001 TYPE TABLE OF t001.
   DATA: url(1000) TYPE c.
SELECT * INTO TABLE lt_t001 FROM t001.
CALL FUNCTION 'DP_CREATE_URL'
    EXPORTING
      type                 = 'APPLICATION'
      subtype           = 'X-R3TABLE'
    TABLES
      data                 = lt_t001
    CHANGING
      url                    = url
    EXCEPTIONS
      OTHERS           = 4.
C#:
using SAPDataProvider;
using SAPTableFactoryCtrl;
public void SetDataFromUrl(string url)
            SAPDataProviderClass p = new SAPDataProviderClass();
            p.SetDataFromURL("APPLICATION", "X-R3TABLE", url);
            ISapDPR3Table tbl = p.GetDataAsR3Table("APPLICATION", "X-R3TABLE");
            SAPTableFactoryClass tf = new SAPTableFactoryClass();
            Table tb = (Table)tf.NewTable();
            tb.ISAPrfcITab = tbl.DataTable; // Exception !!!!!!
How to get internal table from SAP Data Provider ?

Hi Sergey,
I'm trying to do the same, have you found a solution to solved it?
thanks for your help.
Regards.
Jonathan

How to Trigger an IDOC from SAP R/3 to two XI systems

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.

Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you ..

How to retrieve the data from SAP database.

Hi Pals,
How to retrieve data from SAP R/3 System to my third party software. I will make my query little bit more clear. There is a list of assets entered and stored in the SAP system. For example 3 mobile phones.
1) Mobile 1- Nokia
2) Mobile 2 - Samsung
3) Mobile 3 u2013 Sony
Now think I do not know what all assets is there. I have to retrieve the data and get it on my third party software. Just display the list of assets. Lets say SAP XI is also there. Now how will I map it and get the details.
Please give me step by step method.
N.B: Just to read the data from SAP database.
Please make the flow clear step by step.
Thanking you
AK

Hi,
You can use RFC or ABAP Proxy to make synchronous call with SAP.
Under RFC or ABAP Proxy Program you can get the data from SAP tables. Direct access to SAP Database is not preferrable even if its possible.
The better way to go for RFC or PROXY.
You will send the request from Third party system and the it will be as input parameters from RFC/ Proxy it will response based on it.
This got it all..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
HTTP to RFC - A Starter Kit
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
Refer
Thanks
Swarup
Edited by: Swarup Sawant on Jun 4, 2008 9:32 AM

How to read a mail from sap inbox thru abap code?

how to read a mail from sap INBOX thru abap code? can anyone tell me the technical approach? I NEED TO READ A MAIL and then need to pass the parameters to a bapi.
Message was edited by:
shahid mohammed syed

Hi SSM,
Did you manage to have your program working? I also have same requirement. I tried standard FM and BAPI but I always encounter authorization error when I tried accessing other user's mail. Thanks.
Regards,
Ryan

How to call WEB Service From SAP

Hi Friends,
How to call WEB Service From SAP.
Thanks in advance,
Murali Krishna K

Hi,
if you mean calling a web service in Web Dynpro ABAP, see the <a href="http://help.sap.com/saphelp_nw70/helpdata/en/d7/951b42f828df2ce10000000a1550b0/frameset.htm">documentation</a>, if you mean calling a web service in general, this is not the correct forum. This here is the Web Dynpro ABAP forum, for general questions on ABAP, use the ABAP forum.
Regards, Heidi

How to connect oracle database from tuxedo

Hi,
How to connect oracle database from tuxedo.
If any one can help me.
Regards,

it depends on configuration your going to choose, there are two ways--
- Using X/Open standards, for this
you have to make an entry of Resource manager in $TUXDIR/udataobj/RM file.
Then in UBBConfig file in GROUPS section u have to set Openinfo.
It also depend on which database you are going to use.
In your service now you need to call tpopen() API from tpsvrinit() function.
- Other possibility is, take an implicit connection using Pro*C or Pro*Cobol whatever platform you are using.
EXEC SQL Connect ...

How to connect to Mercator from SAP R/3 System?

Similar Messages

Maybe you are looking for