How to connect to multiple speakers using Airport Express

Hi -- I have two AP Express modules setup and working in my household. I have no problems using either from my iBook G4.
How do I use them both at the same time? I cannot find an appropriate way to set this up?

Welcome to Apple Discussions
Since you are at 10.4.7, I'm assuming iTunes is at least 6.0.2. If not, upgrade the app via Software Update or Apple's iTunes site to the latest v 6.0.5.
Since both units work individually, I'd say the problem lies in how the 2 units are configured. Are you using the latest 6.3 firmware for Airport express? To determine your version, download the firmware, select install. The ensuing panel will tell you the latest version for your units. Upgrade if you are using an earlier version of the firmware.
Post back with results.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.7) LaCie 160gb d2 HD Canon i960 printer

Similar Messages

Cannot connect to remote speakers using Airport Express

Yesterday I was able to connect to my hi-fi using remote speakers in iTunes 6.0.4 through my Airport Express (AE) and take full advantage of Front Row, however later in the day the speaker selecton pop-button in iTunes disappeared. I did a hard-reset of the AE unit, shutdown the computer, checked the preferences selection in iTunes etc, all without success. I checked the discussion boards of both iTunes and Airport for a solution. Found something interested where someone said that they shutdown the computer and went to bed and in the morning, hey presto everything was working. He thought that having a good night's sleep was the solution. So, I shutdown the computer and went to bed. The next morning, the light on the AE was green and after booting up my iMac Intel the pop-button reappeared (I still don't know what solved the problem) but now it will not connect to the speakers. It tries but gives us after 30 seconds or so.
Here is what I have done so far: I used Airport setup assistant to set up the AE. During that process I selected to join an existing network that is provided by my Airport Extreme base station and I selected to only use the AE to share a printer and play iTunes using WDS bridging. This process works every time.
Right now, the light on the AE unit is flashing amber. In Airport Admin Utility both the Extreme and the Express are listed but the Extreme has an IP address of the 10.0.x.x variety whereas the Express has an IP address 169.254.x.x variety! Strange. If I double-click on the Express it takes an age to get a response and when the response eventually comes - asking for the password I then get an error saying that "the airport admin utility was unable to read the configuration of the selected base station.
I have tried resetting and repeating the above without success. Therefore, any other ideas or help would be greatly appreciated. I want to boast about Front Row to my Windows friends without the embarrassment of connection problems

I am having almost exactly the same trouble with an Airport network I recently set up in my home. I have a G5 with a brand new Airport card, an Airport Extreme Base Station (also brand new) in the same room acting as my internet portal, and an Airport Express (yup--brand new) downstairs piping iTunes to the stereo.
I could get the G5 and Extreme base to talk without a hitch--they are right next to one another, after all. When I tried to link the Express into the same network, the Express vanishes. When I tried moving it into the same room with the Extreme, I could find it, and play tunes through a set of headphones. Moving to an outlet in the hall outside the room, it still worked. Moved to an outlet on the far wall of the room across the hall, it would play only sporadically, dropping out about 4 seconds out of every six. Anywhere else, and it wouldn't show up at all.
However, when I set up the Express to be a separate network, my G5 was able to access it and play music without difficulty, anywhere in the house. I've been playing iTunes on my stereo for weeks, with the downside that I can't do that and surf the web at the same time.
Last night I tried the experiment of moving the Extreme Base Station around. With my G5 in the living room, in the approximate center of the house (1/2-level above the basement, 1/2-level below the office--it's a split level), I was able to access the Express and play tunes on the stereo as usual. With the Extreme Base downstairs, right next to the Express, my G5 could not even locate its signal. Fifteen feet closer to the center of the house (but still downstairs): couldn't find it. At the base of the stairs: couldn't find it. At the top of the stairs (20 feet from the G5, but just around a corner): couldn't find it. Three feet out into the foyer at the top of the stairs (and now in a direct line of sight to the G5): 20-30% signal. Keep in mind that during all this, I could switch over to the Express network at will (75% signal) and play music downstairs without a hiccup.
It seems to me that there's something wrong with the Extreme Station itself (or at least, with the way it's trying to communicate). If it were external interference due to an outside network, a microwave oven, or a 2.4 GHz cordless telephone, I would expect it to effect both networks equally--but it isn't. The Express seems impervious. I've noticed in another set of posts that some people with wireless connection problems have found that switching from the most recent version of the Extreme Base firmware (5.7) to an older one (5.5.1) has fixed the problem. I plan to give it a shot myself. I'll let you know how it turns out.
Dual 2.5 GHz G5 Mac OS X (10.3.9)

After iTunes update, can't connect to remote speakers via Airport Express

I updated to iTunes 10.1.2.17 the other day, and ever since then, I can't connect to my stereo via my Airport Express. I get this message: "An error occurred while trying to connect to the remote speaker 'Airport Express'. The network connection failed."
My Airport Express firmware is up to date and I have not changed any settings since the iTunes update.
Anyone else have/had this problem? Any ideas?

I run Vista and I had the same problem after updating to the latest version of iTunes: Apple TV would indicate "Loading Library" for ever and nothing would happen. This had never happened before.
I tried different tricks like turning on/off home sharing on both iTunes and Apple TV (didn't work), unplugged/plugged Apple TV (didn't work), restore Apple TV (didn't work).
Eventually the solution was actually very simple: go to Firewall settings and make an exception for iTunes. I don't know why that was not necessary before the update, but it made the trick.

ITunes 8: I can no longer connect to remote speakers via Airport Express

Cannot connect to my remote speakers, worked before iTunes 8"
I have restarted the computer, iTunes, QT 7.5.5, run disk utility
I get the following error code (-3256) Apple KB research says:
AirTunes: Error -3256 when streaming to multiple AirPort Express units  You may see this message: An error occurred while connecting to the remote speaker speaker_name . An unknown error occurred (- 3256 ).This occurs with iTunes 6.0.2 or later.SolutionIf you use a third-party firewall or router, make sure that it is configured to permit UDP traffic. http://docs.info.apple.com/article.html?artnum=303157
I followed the KB link, tried KB solution, then I sent this off to Apple.
"Mac G5 2.0 Ghz, OS 10.5.4 just installed iTunes 8, one (1) Airport Express connected to remote speakers. Firewall under Sharing in System preferences does not offer firewall access. Firewall is under Security but "Advanced" is grayed out.
Cannot connect to my remote speakers, worked before iTunes 8"
I have restarted the computer, iTunes, QT 7.5.5, run disk utility, unplugged the airport express.
My G4 PowerBook running an earlier version of iTunes connects without problem.

I just got off a 30+ minute phone call with an Apple Support rep about this. I'm getting error -3256. The rep was patient and tried hard to solve the problem, but was basically clueless. I have a case number and was encouraged to call back tomorrow to speak with a product support specialist.
This stinks. AirTunes is my primary way of playing music from my computer. With no obvious way of rolling back to iTunes 7, this is a big deal.

Cannot connect to remote speakers through Airport Express

Please help me! Please for the love of the mac guy on tv who encouraged me to switch.
I've been a happy mac user. I am not all that technically saavy and hence switched to a mac because "it just works." I bought the airport express and hooked it up through my WIRED network so that I could play tunes on my stereo from iTunes. Things have worked amazing and have had no problems until now. I don't even have the option now to look at remote speakers.
I know this is a common problem. This issue was even posted on Engadget for crying out loud. I've been reading these forums for the better part of the day trying things and I think I've actually made things worse.
I've resetted my airport express (now my iMac can't even find it). The AE still works though because my work computer can still see it and hook up to the internet through it. I've enabled IPv6 and have disabled IPv6 (have seen some conflicting information on that). I've went into the firewall settings and even added a port (5353) from another post I read. I've checked and double checked my iTunes settings and the option to check for remote speakers is on. I believe all of this happened since my iTunes was upgraded to the latest. For a computer that is supposed to just work, well, it just stopped working (the one issue).
I don't know if it shows, but I have an iMac G5 with OS 10.3.9. I know that's kind of old now, but the computer has been doing everything I've needed it to do. I like it. I just want this to work. So, I am begging anyone with any knowledge to pleeeeease help me out. Don't crucify me for not reading the other discussions. I have. I put in a great effort. Now again, I plead, help me - even if it takes a back and forth effort for a while. I thank all in advance for trying.

That's the other thing, AirPort setup assistant doesn't allow me to get very far. I get to the introduction page and click continue to begin. Then I get an error message saying I have no AirPort card installed (which is true, but not necessary because I'm on a wired network to get to the airport express base station).
Unfortunately, the AirPort Setup Assistant requires a wireless connection to work so the error you are getting when using it would be normal. Your options would be to use the AirPort Admin Utility or use the newer AirPort Utility on the Dell to administer your 802.11g AirPort Express Base Station (AX). The latest version of this newer utility can be downloaded from here: AirPort Utility Setup 5.3.2 for Windows
If I click New then an error message pops up saing No new AirPort networks were found. Click continue to scan again. I can keep doing this with the same result.
When having difficulties accessing the base station from the AirPort Admin Utility, try the following:
o Make sure that you connect to the wireless network, created by the AX, before you attempt to access it with the utility. The default Network Name (or SSID) will be something like Apple Network xxxxxx, where the x's are the last six digits of the base station's AirPort ID.
o If the utility still doesn't find the base station, try temporarily connecting your computer directly, using an Ethernet cable, to the Ethernet port of the AX, and then, try accessing it again.
o If the utility still can't find it, the I suggest that you perform a "factory default" reset on the AX. Note: You may have to try this several times, but be sure that you get the rapid flashing status light to verify that the reset took. After successfully resetting the AX, and while still connected by Ethernet, try to access it with the AirPort Admin Utility again.

ITunes can't connect to remote speakers PLUS Airport Express p/word problem

I am running iTunes 7.4.1 and have previously been able to play iTunes through remote speakers via an Airport Express . After upgrading iTunes some time ago, I am unable to connect to the AE any more. The AE shows as an option in my iTunes window, but when I select it from the drop down option box bottom right, it just doesn't choose it.
I have read other discussions pertaining to this, and have followed all of those solutions, but to no avail.
I have done a hard reset on the AE restoring it's factory settings thinking I should just start again, and it has been renamed "Base Station Oa369f" so I know this has worked, but when I try to reconfigure it through Airport Utility, it asks for a password. I tried it's old password, and also tried the generic one "public" as stated in the AE setup guide, but it rejects both.
I am keen to figure this out as I'm about to buy a new printer and another AE so I can print wirelessly, but don't want to have the same issues if it's an AE bug that can't be fixed, I would be left with no printer!
I know this is two quite separate problems, but if anyone has any ideas for either I would be really grateful.
Thanks very much

I have exactly the same problem which has been driving me nuts for the last couple of days. However I am able to access the dropdown list of speakers. I have mine set to multiple speakers, and now it WILL play through my Airport Express again, but only when playing through the internal speakers at the same time. When I try to play solely through the Airport Express it just hangs.
Come on Apple, you need to be regression testing your upgrades far better than this, for something so basic to go wrong.

Itunes (MAc & Windows) shows no remote speakers using AIrport Express

I have both a Win XP PC and a Powerbook G4 connected to a wireless network using a D-Link DI-624 router. Both computer can connect to the internet, the Powerbook is connected wirelessly.
I've set-up my airport express on the wireless network using a static IP adress, and it gives me a solid green light. Airport Express firmware is 6.3 and it is configured as a client on the network.
I can not access the remote speakers on iTunes on either the Mac or the PC. Both computers have the "Search for remote speakers" checked in iTunes. I've tried everything, including re-booting etc. but with no luck.
Does any one have any ideas? Could a port in the D-Link router be blocking access, since both computers are unable to see the remote speakers?

Problem solved.. The unit wasn't getting the correct IP adress. I re-configured using DHCP and it worked.

Apple TV and multiple speakers on Airport express

Hi,
I'm using Apple TV3 and 10.8.3 Mac with Itunes 11 and would like the flim audio to play on multiple (3) airport express' with speakers attached around the room all on same Wifi.
Is this possible?
Thanks

As my english isn't too good I made a screenshot to show you what I mean.
As you can see in the image below iTunes only shows me the computer speakers and the AirPort Express. But at the bottom you can see that iTunes actually recognized 3 different speaker (Mac, AirPort, Apple TV 2). Why does the Apple TV not show up in the multiple speakers window? Any ideas?

Multiple speakers for airport express

I'm trying to connect multiple speakers from my Itunes but I can't get it to work. I can get one or the other to work but I can't get both to work at the same time. I updated the software for A-express, still doesn't seem to work. Anyone else have this problem? Is there a solution?
thanks

Hi
I have been having the same problem since I purchased an Airport Express. You can select one or the other speakers, but an error message comes up if you try and select both.
It is rather more annoying given that I have 'remote' on my iPod Touch which completely locks up if you try and change the speakers.
I have had no luck getting Apple to understand the issue - despite several emails and phone conversations with support. Ultimately I consider it to be a software development issue.
Hopefully they are reading these posts!!

Multiple Broadcasts using Airport Express

Can I use more than one Airport Express to play a single Itune source in several rooms each equipped with a its own Airport Express. If so up to how many rooms and how do I set up network.

Is these any chance? Possibly, but also possibly not with the current Airport Express design. The problem with streaming to multiple Airport Express devices would be in keeping the sound output from all of them in sync - a bigger technical challenge than you might first imagine.
Only Apple and is product developers know the real answer to this question - but since Apple never pre-announces upcoming hardware or software products, we won't know until the day an official announcement from Apple is made.

How do I print from iPhone using Airport Express to a regular printer over enet

I am trying to figure out how to print from my iPhone or iPad to a regular printer that is on my wired ethernet network. I purchased Airport Express and my iPhone recognizes the Airport Express. I connected the USB port to the USB port on printer. The printer recognizes the Airport Express. But my iPhone does not recognize the printer. Any ideas?

See this article about AirPrint: http://support.apple.com/kb/HT4356
Note the next-to-last bullet in "Notes" near the bottom:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
I do not believe you can use AirPrint to print to a wired printer, period. Very likely, you cannot use even a printer manufacturer's app to print to such a printer. You would need a wireless printer.

How to set up iHM79 speakers with airport express?

I've got the green light on the express.. i can see it fine in airport utility. I've told iTunes to play thru the express. But the express does not seem to realize it has speakers attached to it. All i did was plug the speakers into teh express. I notice that in airport utility, it wants to know the name of the speakers. Well, near as i can tell, the speakers don't have a name, and there are very few directions that came with them, so i am lost.
How do i tell the express that it's got speakers attached so that i can play music thru them wirelessly?

William Boyd, Jr. wrote:
Jo Dorais wrote:
the express does not seem to realize it has speakers attached to it. All i did was plug the speakers into the express. I notice that in airport utility, it wants to know the name of the speakers.
You can use AirPort Utility (in the Music panel) to give the speakers a name. That can be useful if you have more than one set of speakers attached to separate AirPort Express units so that you can distinguish between them in iTunes.
I can't find a way to name the speakers.. it just asks me what the name of the speakers i want to use is.
How do i tell the express that it's got speakers attached so that i can play music thru them wirelessly?
Can you see the speakers in iTunes? One thing you may have forgotten to do is to check "Enable AirTunes" in that same Music panel of AirPort Utility.
I had that done, but it didn't matter. I could see the express in iTunes, but not the speakers specifically.
However, i have gotten it all to work by starting over. I ran across a tutorial here, telling me to plug the speakers into the express and THEN plugging the express into the wall, and then setting the express up with airport utility. So i restored it to default factory settings at that point and started from scratch. Voila! I still don't see names for the speakers, but they play music, so i'm not arguing.
Now I've left my daughter to figure out where to find the app for her iPod Touch to remotely control things.

How to connect printer epson l210 to airport express

How to connect and setup printer epson l210 to airport express

Hey Love iapd,
Thanks for the question, and welcome to Apple Support Communities.
The following article will outline how to set up a printer that may be connected to an AirPort Express.
OS X Mountain Lion: Set up a printer connected to a Time Capsule or AirPort base station
http://support.apple.com/kb/PH10875
Additional information:
USB printer troubleshooting for AirPort Express, AirPort Extreme, and AirPort Time Capsule
http://support.apple.com/kb/TS1253
Thanks,
Matt M.

Multiple Speakers with Airport Express

Since the release of iTunes sometime back in feb/mar, I'm so happy to be able to stream music through multiple speakers in different rooms in my house. However, since I installed the latest iTunesSetup dated 2006-06-28 release v6.05, I am unable to play to more than 1 set of speakers, sometimes even only limited to "My Computer". The error message was something like 'could not access the speaker'.
I've also doublechecked latest firmware and there was none released after http://www.apple.com/support/downloads/airportexpressfirmwareupdate63forwindows. html
I don't see anyone here with similar problems since there seems to be none posted after Jun 28 on this issue.
Can any expert help?

http://docs.info.apple.com/article.html?artnum=303157
# Click the Firewall tab.
# Click the Advanced button.
# Make sure that the option to "Block UDP Traffic" is not selected.
Thks so much for the reply! My PCs are behind the router and the firewall is not on in this case. I do use the zonealarm normally for other PCs.
As far as I know, on XPProSP2 we can unblock UDP traffic and normally need to specify which ports though, not universal unblock.
Any other clues?

Multiple Speakers on Airport Express

Hi everyone
I have recently purchased a second Airport Express so I can now stream my music to 2 different locations in my apartment. In iTunes I now have the option of streaming to Multiple Speakers. When I try to select this option only one of my Airport Express Stations will allow multple speakers to be played. I get the errors message
"....The current remote speaker Paul's Lounge does not support playback as part of a group..."
Is this due to the fact that the Airport Express is slightly olders - I didn't know there was an update to the cababilities of this model. Or can this be remedied with a firmware update of some kind.
I hope someone can help as I'd love to have music playing in my Lounge and Bedroom simultaneously.
Many thanks
Paul

Hello Paullyk. Welcome to the Apple Discussions!
Is this due to the fact that the Airport Express is slightly olders - I didn't know there was an update to the cababilities of this model. Or can this be remedied with a firmware update of some kind.
To support multiple speakers, the AX must be running v6.3+ firmware & iTunes v6.0.2+.
(ref: AirPort: Which version of firmware is on the base station?)

How to connect to multiple speakers using Airport Express

Similar Messages

Maybe you are looking for