How to connect to my network?

The Wi-Fi is ON
"Choose a Network"
The network is shown (with a padlock) - virginmedia4177920
Ask to Join Networks is ON
Then I get message:-
Unable to join the network "virginmedia4177920" Dismiss
I connect through Realtek PCIe GBE Family Controller
Router/modem is Netgear VMDG280

Have just updated the router firmware but to no avail

Similar Messages

How to connect a "Clear Network" Modem to my Airport Xtreme?

Hello friends. I recently purchased the clear network modem. I need to know how to connect it to my Airport Extreme and get my local network at home working with 4 computers. Thank you!

Except that I don't know much about the Extreme, it should be simple.
Power down the computers, the Extreme, & the Clear Modem, wait 5 minutes, connect an Ethernet cable, (it is one with Ethernet right?), from the Clear Modem to the WAN port of the Extreme, power up the Modem, wait 3 minutes & power up the Extreme, wait 2 minutes & power up the Mac(s).
Windows directions, but basically the same to setup the Extreme to hand out IPs...
http://oit.ncsu.edu/resnet/apple-airport-extreme

With HP6500A Windows Visa Cable hookup, how to connect printer to network

With HP6500A all in one Windows Visa cable hookup, how to connect printer to network

Welcome to the forums @TonyWE
I understand you are looking to connect your Windows Vista computer, to your network. Below is the guide for you to follow to connect the printer wireless or wired to your network.
I hope this helps
Setting Up the Printer Software for a Wired or Wireless Network for the HP Officejet 6500A e-All-in-...
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do connect to the network

I want to edit my homepage but it it informs me I am not connected to the network. How do I do this. I am new to this printer

Dear zarack,
What's your printer's model number and do you have a wireless router in your home?
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP

How to connect to home network

how can i connect to a windows pc in my network?
i can't acces in my other computer, an password is asked which i have no idea what it is or can be.
in fine i can't pass the password section.

How to share a Mac's files with a PC and vice versa.

How to connect to windows network

Is there a way to connect your iPad and/or iPhone 5 to a Windows network? If so how?

Hi, Charlie -
I'm not insulted at all! I appreciate the dialog.
Here's what I can tell you. I checked the airport utility and it indicates specifically that the Airport Express is being used to "Extend a wireless network." It's not connected to the Airport Extreme by any cable.
Given the difference in indicated signal strength on my MacBook Air (I'm using it now and it's 3 feet away from the Mac Pro), I've got full strength on the Air but when I try to connect the Windows machine it indicates only 1 bar/unit of strength. I'm guessing that it's not seeing the Express (extended) but only the Extreme that's much farther away. I'm in the basement at one end of the house and the Extreme is on the second floor at the other end of the house. When I boot the Mac Pro to OS X I'm able to join the extended network. Hmmmmm...
Rob

How to connect to a network that has blocked Mac addresses?

My school has blocked Mac addresses how do I get around this?

lllaass already answered, and JakeStebbings provided as helpful a suggestion as possible.
You might as well mark your own response as "answered" and move on:
That's impossible.

How to connect to a network dell laser printer 3010cn?

I have the drivers on the original CD but the Mac does not launch it and just give the option in the submenu to eject or get info...not usefull really! If anyone have a solution they are more than welcome to provide them.
For info , the printer is shared on a network which can be use on the second computer (Windows) but not on the Mac...
Thank you for your precious help .

Hi again Fred,
Ya a little research and I see there doesn't seem to be any Mac support for that printer. Too bad. I guess a good reason to stick with the various printer manufacturers who don't care about which operating system you use (Epson, Brother, Canon, etc.).
As Luvlabs mentioned, Brother has some nice printers that work great with the Mac. My mother-in-law bought a MFC-490CW she runs off her Windows XP system, but it is a wireless printer, so our HP laptop and my new iMac all see and print to that printer great, even though it is on the other side of the house. Of course this one isn't a laser printer, but instead an ink jet, but the point is Brother appears to fully support Macs with their software and drivers.
Best of luck,
Patrick

How to connect a Sony Bravia TV to the internet through your Airport network

Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

I have now had a detailed reply from Sony Europe and the way to do this is to:
1.       Press Home on the TV Setup
2.       Use the right and left arrow to select Setting.
3.       Use the up and down to select Network, press Enter.
4.       Select Network Setup.
5.       Select Wireless setup.
6.       Select Scan
7.       Select your network
8.       A new screen will appear asking for entering the security key.
9.       Enter your WPA2 key.
10.   Select Enter.
11.   It will take you back to the same screen asking for entering the
security key.
12.   Press the right arrow.
13.   Select Auto.
14.   Press the right arrow.
15.   Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

How to Connect My Printer to The Network

My printer is LaserJet M1212nf. According to the brief introduction I should connect the printer to the network first in order to enable its e-printing function. I'm working at home. I don't share information with other computers. Does "network" mean my home internet? Do I need to use either a cable or a USB to connect it to the home internet? Or is there another way? Once it is connected, how can I get an email address from HP for my printer?

Hi,
Your printer can be connected to your network to print but it's not an ePrint printer:
http://www.shopping.hp.com/shopping/pdf/ce841a.pdf
It has a LAN card, you can connect it to your network and print wirelessly (note: print wirelessly and ePrint are two different things).
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02272928
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to connect 2 apple TV to the same wireless network?

Hi,
Can somebody please help me shed some light here on how to connect 2 ATV to the same wireless network? My first ATV connected to the network just fine and syncing with my itunes, however the 2nd ATV keeps getting problem connecting to the network everytime I tried to connect to the network. It detected my home network on Linksys router just fine, but it wont connect to it.
Hope someone can help me out here... Thanks peeps...

Hm ive make sure all the password and everything is correct and yet it wont connect. Keeps getting the problems connecting to the network, please check your setttings.

How to connect an apple tv to an enterprise network with a username and a password? I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

How to connect an apple tv to an enterprise network with a username and a password?
I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.

How to connect my macbook pro to a computer-to-computer network?

how to connect my macbook pro to a computer-to-computer network? My home computer is a Window 8 OS. Thx.

The easiest way, and it may work from scratch, is to share the folders/drives you want access to on your pc, noticing what are the default parameters (eg "workgroup" etc.).
Then, you can connect your mac directly by ethernet, for instance, and, in Finder, go to > Network, you should see the folders/drives. You may be asked to provide user/password.
Don't get confused by regular/crossed ethernet cable, as mac can cross by software, so a regular cable will be ok.
Anyway, either you isd modem has the ability to connect several devices (multiple ethernet sockets, or wifi), or you can buy a router, which isn't expansive.

How to connect my mac book pro to network printer Canon IR 2010f?

I'm desperate to know how to connect my Mac book Pro to network printer Canon IR 2010f. This printer has an independent system, therefore, no need a PC to be on, in order to print. But this printer is a network printer. Help me please.

The Canon UFR2 v2.20 driver for Mac OS X does not list the iR2010F as a supported model. The same is so for the Canon PS driver so I therefore believe this model is PCL5e only.
What you should do is open Safari and type the IP address of the iR2010F. This will connect to the internal web page of the copier and from the provided pages you should be able to see what printer languages are supported.
If it only lists PCL then you will be able to print to this copier using the Generic PCL driver included with 10.6.
So if you open Print & Fax, click + to add and then select IP > LPD for the protocol you can then enter the IP address of the iR2010F and leave the queue name blank. For the name you can change that to iR1020F and for the Print Using, select Generic PCL Laser Printer.
One note with regards to this driver. It is defaulted to 300dpi so you will need to open the print dialog when you do print and change the resolution to 600dpi to get better print quality.

How to connect to my network?

Similar Messages

Maybe you are looking for