How to connect to pop server

Hello friends i have problem connecting to my pop server
iam using the following code to connect to the pop server
// Create empty properties
Properties props = new Properties();
props.put("mail.store.protocol","pop3");
props.put("mail.pop3.host",MYPOPHOST);
// Get session
Session session = Session.getDefaultInstance(props,null);
try{
// Get the store
Store store = session.getStore();
store.connect(HOST,USERNAME,PASSWORD);
the error that i get is that the pop provider not found
can anybody tell me what is the problem

Thank you for the reply but i should tell you i tried
with the actual name of my pop mail server too
but it dint work
i even tried by dialing from my system using a local isp service provider i am able to send mail using the smtp server of my local isp but not able to connect to the pop provider

Similar Messages

Just upgraded to TB 31.4.0 and it is no longer asking for password, will not download new mail but does connect to POP server. I can send (it asks for p-word)

Failure to download or allow sign in started with current upgrade.
Despite inability to sign in, I have access to all settings and address book.
I've "repaired" the inbox folder and checked the firewall settings. Connection to POP server is fast. Downloads for the last week or so (prior to upgrade) have been VERY slow...
Likely the solution is "simple", but I'm very much NOT a "software tech" kinda guy.... If you can help, please use small words ; )

''Pupster [[#question-1041384|said]]''
<blockquote>
Failure to download or allow sign in started with current upgrade.
Despite inability to sign in, I have access to all settings and address book.
I've "repaired" the inbox folder and checked the firewall settings. Connection to POP server is fast. Downloads for the last week or so (prior to upgrade) have been VERY slow...
Likely the solution is "simple", but I'm very much NOT a "software tech" kinda guy.... If you can help, please use small words ; )
</blockquote>
No idea why, but the problem seems to have resolved its self..

How to connect to iPad server for email

How to connect to iPad server to get email

What do you mean by "iPad server"? Who is your email provider? To add an email account to your iPhone, see Settings>Mail, Contacts, Calendar>Add New Account. If your email provider is not one of the listed ones, you may need to get specific settings from your provider.
Best of luck.

I can't receive my incoming mail. ESP is yahoo. Error msg says unable to connect with POP server. Any solution?

I can't receive my incoming mail in Mac Mail. ESP is yahoo. Error msg says unable to connect with POP server. Any solution? I am able to get my incoming messages via yahoo website but not through the Mail app.

Try this, if it is not the correct department, ask them for the number or to be transfered..
Call 1-800-318-0612 for Login Help
Also on most autmated systems, if you hit 00000, or ##### you can sometimes get thru to a person.
Is Yahoo your Internet provider? Do you have a local provider? ei:AT&T, SBC, cable co, check who you make your check or epatment to...etc, If so I would start there, but if no joy go to the "Mothership"
I may be wrong about this, (it's been a long time now) I may have deleted my mail account from Mail (after writing down all the info from all General/accounts, and the rest of the tabs, and then added a new account using my existing email address, and it may have "walked me thru the rest of the proceedure".
But like I said it was a long time ago 3-4 years, but that may have been the path I ended up taking, make sure to write all the info down in case you need to re-enter it all manually. Then try calling them.
All the best

How to connect MS-sql server with SAP BW

hi all,
i want the connection procedure to how to connect MS-sql server with SAP BW.so that i can extract the data from ms sql server and can create cubes using that data.please help me in this issue.

Hi Vamshi,
Go through this DOC it explains u how to connect to other data bases like SQL...
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff]
this is a thread related to connect the SQL server..
[DB Connect MS SQL Server;
Regards,
NR
Assign points if helpful...

Mail 1.3.11 (Panther) not connecting with POP server

I can send mail, no problems. However, to receive my mail I have visit my ISP's website to read it there. Apparently, Mail.app is not dating the incoming mail server which is leaving me with an empty mailbox.
I have gone over all the setting with my ISP so many times the support team recognizes my voice everytime I call. I have seen exotic fixes having to do with [~/Library/Mail/MessageRules.plist] and such, but I'm reluctant to go messing around in there. How does one fix my problem without a Ph.D?
G3 iBook dual USB 600 Mac OS X (10.3.9)

I don't understand your obsession with overstuffed mailboxes.
What are you talking about? As I told you in a previous post, Mail sometimes chokes on a message it cannot download and that prevents it from downloading the rest as well. This is a relatively common problem. It has absolutely nothing to do with overstuffed mailboxes.
The two servers are failing to connect.
This is wrong! And which two servers are you talking about? According to the activity information you reported, Mail is connecting to the POP server, but failing to download the messages it sees there for some reason...
If you want to mess with the contents of your ~/Library/Mail/ folder (which you said in your first post you didn’t want to do), there are a couple of things you may try as well.
For POP accounts, Mail uses a file within the account folder to keep track of which messages have already been downloaded. Deleting that file causes Mail to treat everything still on the server as if new and try to download it again:
1. Quit Mail.
2. In the Finder, go to ~/Library/Mail/POP-username@mailserver/.
3. Locate one or two files named MessageUidsAlreadyDownloaded and move them to the Trash. Mail 1.x used MessageUidsAlreadyDownloaded to keep track of which messages had already been downloaded. Mail 2.x uses MessageUidsAlreadyDownloaded2 for the same purpose.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

How to connect to external server using router from VLAN's

Hi, I am newbie. I am trying to build network system in Packet Tracer.
Now I have such network layout.
I have different VLAN's Accounting and Sales. I have configured this using subinterface in router to allow computers from different vlan's communicate with each other. Everything works.
Let's assume that there are next subnets and VLAN's. Acct. VLAN (2) (ip's 172.168.0.1-172.168.0.254/24) and Sales VLAN (4) (ip's 172.168.1.1-172.168.1.254/24).
But I need to connect all this computers to the external server. That has ip , for instance 192.168.20.13/24. Like this.
I don't know hot to correctly configure router to make it possible for computers to connect to this server. I have connected switch to the another router interface. And than connected server to the switch and specified ip 192.168.20.13/24. Than I tried to set ip to the router interface from the same subnet like 192.168.20.22/24. So now router can communicate with server.
But how to allow computers to communicate with the server. Please help. I am newbie.
I would be grateful for any help.

Hi Androgen,
One question for you..How does the sales VLAN computers communicate with the accounting VLAN machines? It's through the inter-VLAN routing that you have already setup.
Communicating to the external server is also similar to this.
The computer's in the VLAN should be configured with the default gateway IP which is the the L3 sub-interface IP for that subnet.
Also, the external server needs to have a default gateway to communicate with other remote subnet. The default gateway of that server would be 192.168.20.22 which is the L3 interface for your external subnet.
CF

How to connect to remote server with jmx from jvisualvm

I have a WL 10.3.2 domain running on a single box. The adminserver and managed server are running on the same box, on different ports (7001 and 8001, respectively).
I have a Spring application deployed to the managed server and I've configured it to register a Spring bean as a JMX mbean.
When I run this entire configuration on my laptop, I can run jvisualvm and connect to my server and see and manipulate my registered mbean.
I'm having trouble figuring out how to get a remote connection working, however. I want to run jvisualvm on my laptop and connect to the remote server.
I first did "Add Remote Host", where I specified the IP address. It appears that this was created successfully, and it apparently was able to determine the DNS name for it.
I then tried to add a JMX connection. In the "Connection" field, I just entered the IP address followed by a colon and 8001 (managed server port number).
In the "Use security credentials" section, I entered the weblogic admin principal and credentials.
When I click OK, it chugs for a while and eventually gives up, saying:
Cannot connect to [email protected]:8001 using
service:jmx:rmi:///jndi/rmi://nn.nn.nn.nn:8001/jmxrmi
What might I be missing?

I've resolved this. At least I was able to configure an authenticated connection. It doesn't use SSL yet, but I'm ok with that for a while.
Resolving this only required changing the command line parameters for the managed server, and being aware of the "jmxremote.access" and jmxremote.password" files. The following blog article helped a lot: [http://www.dzone.com/links/r/monitoring_your_java_application_with_jmx_part_2.html] .
I'm now passing the following command-line parameters:
-Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=8888 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=true
The default "role" configured in "jmxremote.access" is "controlRole", and the "jmxremote.password" file specifies the credentials for that principal. I simply used that principal and credential in JVisualVM, and the connection succeeded.
And I just used the "host:port" form, not the protocol form.
Edited by: david.karr on Feb 4, 2011 12:47 PM

How to connect oracle application server portal to MS access DataBase

Hello,
I am facing one problem here.
Our client is having their database in MS access and they want to implement the oracle application server portal for their organization then how to connect the MS access DB to oracle Application server portal

There is a worked example of how to connect oracle to an Excel spreadsheet, which is easily modifyable to read from an Access Database.
http://asktom.oracle.com/pls/ask/f?p=4950:61:::::P61_ID:4406708207206#18830681837358
I had some concurrency problems - only one person could use the link at any one time, so I used it to load the data into oracle tables.
Tak

How to connect a CVS server with remote Hosts(NWDS7.0)

Hi Frndz..
I installed CVSNT server in one machine n itz workiing fine with that NWDS in that machine , now i want make connect that CVS server from remote machines NWDS's to use that CVS server as a central repo'
Can anyone guide me how can i connect that server from remote machines thru NWDS.
Thnaks in Advance
Regards
Rajesh

rajesh,
did u check this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d079e754-8c85-2b10-8b9a-b36db5262122
Thanks
Bala Duvvuri

How to connect to lined server in SSMS in SSIS connection manager

Hi,
In SSMS (Server name is sqlssisdw1), I have one (SQL Server)linked server name sql4. in that linked server there is DB called rptdb
Now using SSIS I want to use tables in that DB rptdb.
So for this I want to create Connection manager, but for this when I select 'New OLEDB connection' and in that in 'Server Name' when I wrote 'sql4' it is not giving me list of DB. I also tried giving sqlssisdw1 in server name and see if I can see this
rptdb but I can't.
Can you please tell me how can I connect to lined server in SSMS in SSIS connection manager? Thank you.
Vicky

Hi ,
if you are already having access and login credentials to the remote server which is configured in sql4 , you pretty much directly connect to that server from the connection manager instead of going through a linked server. If you still want to connect
through the linked server , you need to establish the connection for SQL Server sqlssisdw1 and then
use a 4 part name query to access the rptdb tables as like below
SELECT * FROM SQL4.rptdb.<schemaname>.Tablename
Best Regards Sorna

How to Install VPN and how to connect client Application server

Hi All,
Could any one tell me. How to connect Client's Application server and How to Install VPN. Thanks in advance.......
Thanks & regards
Vardhan

where r u working?
ask your help desk to give the URL link to down load vpn
after downloading install it, its just like a wizard
you need to give your userid and password , and secureid number
secureid is a small device which displays a number(say a 6 digit number ) this number is keeps on changing for every one minitue.
you need to enter the number which is displaing while you are trying to connect to vpn.
in the middle of connecting to vpn if your secureid number changed , you need to login once again by the same procedure

How to Connect to ftp server in active mode using the finder

How can I can I use the finder command "connect to server" to connect to a ftp server using the active Mode. With Cyberduck I can connect to this server only in active mode. Apparently the connect to server command uses the ftp passive mode.
Or is it an other way to mount on the desktop a ftp server in active mode?
Thank you

Passive mode can be disabled in your network settings, but I have a feeling what you're actually asking for is the ability to upload, and the answer to that is the Finder can't do it. There are some filesystem plugins out there that provide this functionality, but they cost money.

How to connect to SQL Server from Forms 10g?

Hello all,
How do we connect to SQL Server database from Forms 10g?
In Oracle Metalink site they have suggested using Transparent Gateway for SQL Server as a solution.
But is there a way we can connect directly to SQL Server from Forms using an ODBC connection
without installing anything on the database server?
Pls help!
Regards,
Sam

Hello all,
I was able to connect to SQL Server from Oracle using Generic Connectivity (HSODBC).
Transparent gateway was not required.
Followed metalink note 109730.1
So, after I created a dblink to SQL Server, I created a synonym for the dblinked SQL Server table.
When I used the synonym as the table source in Oracle Forms, I got the following error while querying.
"ORA-02070 - ROWID is not supported in this context."
This is because Forms has an invisible ROWID field and when data is fetched from SQL Server table
no Rowid is fetched since SQL Server table doesn't have one.
Is there a way to overcome this issue or do we have populate the block manually using a SQL query ?
Pls suggest.
Regards,
Sam

How to connect to SQL server 2000 with Oracle Form

Hi,
I'm looking for the document of how to connect "SQL Server 2000" with Oracle Form 6i. Anyone knows that?

Shay or other knowledgeable folks,
Is there a way to utilize the wizard for "Business Tier > ADF Business Components > Business Components from Tables" for SQL Server 2000, 2005 or 2008. I can successfully execute sql via java programmatically or import a table from SQL Server with "Business Tier > ADF Business Components > Entity Object" wizard, but the Business Components from Tables simply doesn't see any tables under any schema. Without the "Business Components from Tables", i don't get the referential constraints imported into the application and to code all those from scratch is just not as elegant. So far i have only utilized the sql server jdbc driver from Microsoft (versions, 1.1, 1.2 and 2.0). Is there an alternative client that i need to use to enable selecting tables from that "Business Components from Tables" wizard. Is this a limitation of SQL Server, the jdbc driver or the wizard itself? Did anybody else experience the same issues? I am using Jdeveloper 11.1.1.0.1 against SQL Server 2005 (currently)
Thanks,
Andy

How to connect to pop server

Similar Messages

Maybe you are looking for