How to connect to remote computer using ARD and AE

Does anyone have detailed instructions on how I can us my AirPort Extreme and setup all the ports to allow the use of ARD remotely?

You can configure your AirPort Extreme for ARD using the AirPort Utility. ARD is one of the choices under Port Mapping.
You get to the port mapping option, as follows:
Run the AirPort Utility.
Select the AirPort Extreme, and then, select Edit.
Select the Network tab to enable it.
Click on the "+" button under the Port Settings field.
Click on the drop-down arrow to the right of the Description field. (see image below)
Select Apple Remote Desktop. This will automatically populate the other fields on the page.
Select Save, and then, select Update.
Allow the base station to reset.

Similar Messages

Connecting to Remote Desktop using proxy and Remote Desktop Gateway?

I have setup a Remote Desktop Gateway server using Windows Server 2012 R2. I am using the Remote Desktop Gateway as an intermediary between to provide the remote desktop session over 443 since 3389 is blocked at many client locations.
However, I ran into a problem with a client who's using a web proxy.
Is is possible to configure Remote Desktop to connect via web proxy? If so, how? If not does any one have any suggestions on how to provide a Remote Desktop session via 443 over proxy for situations where you don't control the client's PC or network? Does RemoteApps
allow for access via web proxy when using RD Gateway?
The error message is below:
Your computer can't connect to the remote computer because the web proxy server requires authentication. To allow unauthenticated traffic to an RD Gateway server through your web proxy server, contact your network administrator.
Thanks for any help!

Hi,
My suggestion is to setup a RD Web Access server and make it available for your clients via proxy.
Remote Desktop Web Access (RD Web Access)
http://technet.microsoft.com/en-us/library/cc731923.aspx
Thanks.
Jeremy Wu
TechNet Community Support

Similar to connecting to remote computer using WSManagement, how to do it through powershell terminal?

I have the following code to connect to the remote powershell and execute script on remote machine :WSManConnectionInfo connectionInfo = new WSManConnectionInfo(false, "MachineName", 5985, "/wsman", shellUri, credential);
using (Runspace runspace = RunspaceFactory.CreateRunspace(connectionInfo))
runspace.Open();
using (PowerShell powershell = PowerShell.Create())
powershell.Runspace = runspace;
String file = @"C:\scripts\createUser.ps1";
powershell.Commands.AddScript(System.IO.File.ReadAllText(file));
Collection<PSObject> results = powershell.Invoke();
}How to execute the script in same way from powershell command prompt?

Hi,
The Invoke-Command cmdlet should to the trick for you using WinRM.
Invoke-Command -ComputerName MachineName -Scriptblock {c:\scripts\createuser.ps1}
The parameter -File could also be used for pointing to an UNC share or so.
More information regarding the cmdlet is found below..
http://technet.microsoft.com/en-us/library/hh849719.aspx
Microsoft Certified Trainer
MCSE: Desktop, Server, Private Cloud, Messaging
Blog: http://365lab.net

How to connect to work computer using my iPad?

How can I connect my iPad to my work computer?

Dock cable. http://store.apple.com/us/product/MA591G/B?fnode=MTY1NDAzOQ&mco=MTA4NDc4NTY

Using different credetial to connect to remote computer to get Cert information

I am using following function to get cert details from remote computers. How do I change it to accept credentials to connect to remote computer?
PS : Remote computers are windows 2003 computers without PowerShell installed on it.
function Get-Cert( $computer=$env:computername ){ $ro=[System.Security.Cryptography.X509Certificates.OpenFlags]"ReadOnly" $lm=[System.Security.Cryptography.X509Certificates.StoreLocation]"LocalMachine" $store=new-object System.Security.Cryptography.X509Certificates.X509Store("\\$computer\my",$lm) $store.Open($ro) $store.Certificates}Get-Cert ServerA
-Edatha-

Certainly. Here's a quick example that uses the PowerShell registry provider as a quick an easy way to enumerate the subkeys of HKLM\Software\Microsoft\SystemCertificates\MY\Certificates\ , and to read the Blob value as a byte array. In your
case, you'd probably want to look into using something like WMI's StdRegProv class to accomplish the same thing.
Once you have the byte array, just pass it to the constructor of X509Certificate2. (Note the unary comma in that constructor call; we're binding an object to the -ArgumentList parameter of New-Object, and when you're calling constructors that take
a single array argument, you need the comma.)
Get-ChildItem HKLM:\SOFTWARE\Microsoft\SystemCertificates\MY\Certificates |
ForEach-Object {
$byteArray = (Get-ItemProperty -Path $_.PSPath -Name Blob).Blob
$certificate = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2(,$byteArray)
$certificate

How to open multi-windows to operate a remote compute using socket

hi, please help me.
I want to develop a program, it can open multi-windows to operate the remote comput at one time just like NetTerm. It use socket to setup connection with remote computer.
Now I am using a Thread class to setup socket connection with computer, and use Thread's static varible to control all kinds of action of socket.But it can work only when openning one window,because all the thread instances share the same static variable.
How to do it? Not using Thread? Then the frame will be frozen.
All adivse are welcomed.Thank you.

Maybe I don't say it clearly.The program need to show the output of the socket in the JTextArea and transfer the user input to the input of the socket to control the remote computer.

My ipod says "connect to your computer. use itunes to restore."

My ipod says "connect to your computer. use itunes to restore."
So I plug it into the computer and itunes says it needs to restore, so I click restore, everything seems to go fine, and it says the ipod needs to restart, it does, has a lil progress bar go across the ipod screen, then itunes detects the ipod again and says it needs to be restored again. This is an endless loop, anyone have any idea how to solve this problem?

Have you had a chance to look at this troubleshooting page? Have a look at the bottom section that covers what to try if restoring doesn't work, it may be of some help: iTunes has detected an iPod in recovery mode - Use iTunes to restore

I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hi,
I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hello there hastibahreini,
It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling

How to Connect to Remote ECC 5.0 System from EP ?

Hi,
We are using EP6.0 - located in India, and our client ECC5.0 System is in US. Can anyone please let me know the steps how to connect to Remote ECC 5.0 System?.
Thanks in advance.
Krishna Kumar J

Hi,
Finally we have successfully got connected the ECC 5.0 system which is located in the remote network thru VPN Connection using the same connecting procedure for the local R/3 System.
Thanks & Regards
Krishna Kumar

Can I manage my parents MB from my computer using ARD. Even though they are on different networks

Can I manage my parents MB from my computer using ARD. Even though they are on different networks?>

When you say a diffrent network, do you mean accessing the computer over the internet?
VNC is built into the computer, so you don't need ARD to remote into a computer. To access your parents computer over the internet will most likely require configuring their router/firewall. And unless they're paying for a static ip, you'll also need some way to track their computer.
OR
you can use logmein, or teamviewer. Both programs are desgined to access a computer over the internet. Most of the time they don't require re-configuring the firewall.

JDBC connect from remote computer fails

Hi all,
I have successfully installed the XE server and I can connect over JDBC from clients running locally on the machine where the XE server is installed.
However when I try to connect from a remote computer using the same client I get an error saying: The Network Adapter could not establish the connection
I can ping the machine with XE installed and all firewalls on the machines are turned off.
Any ideas on the subject of JDBC remote connect to XE server? Or is it simply that it is not supported?
Appreciate all the help I can get.
Thanks,
/Anders

On my machine I have the listener bound to local interface.
Listener.ora has hostname in it, and this is the listener status:
As status shows the hostname is resolved to localhost, on this machine I am unable (with this configuration) to share the db to other machines (I do not have oracle client on my other pc, but telnet is unable to connect to port 1521).
Changing hostname to ipaddres solves.
[andrea@bones ~]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Beta on 15-DEC-2005 21:28:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bones)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Beta
Start Date                15-DEC-2005 21:28:40
Uptime                    0 days 0 hr. 0 min. 11 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Default Service           XE
Listener Parameter File   /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File         /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
The command completed successfully
[andrea@bones ~]$

Airport Extreme Route - Logging into remote computer using VPN

is there anything i need to change on my airport extreme router. I used to be able to access remote computer via vpn and now I cant ever since i started using the airport extreme. Im trying to access remote computer using windows xp home.

bkohlmeier wrote:
On one of the 2wire config screens last night, it showed my various devices and next to each one said "IP" of 108.54.... so it was showing the public IP of each one, versus say "192.168.1.160".
Ok, that is weird. Is each IP different and how many devices do you have getting public IP's.. there should only be one available and the only device getting it should be the extreme.
If you only need a bridged modem. go out and buy a cheap single port modem. (I presume this is DSL service. Sorry I am not in US, so what is obvious to you may need spelling out).
We often use the cheapest TP-Link modem here.. TD-8817 which are like $25 for bridged modem.. works really well.
I think also you will find as far as pc is concerned the 2wire is actually the better router. Apple decided to use NAT-PMP on their routers instead of near universal upnp used by all windows networking and just about everything else. That makes opening ports that much harder on the Extreme for games etc.
With the new version utility you can turn on guest network even with the Extreme in bridge.. and what you miss in terms of dhcp is not that great.
If you want to get it working, let me suggest bridging the extreme for the moment. I am sure you will find no issues with Remote Desktop direct through the 2wire, as you probably used it in the past that way.

My 5th gen Ipod won't do anything but show the " Connect to your computer, use itunes to restore" screen. However my computer nor anyone else's will recognize my ipod. What can I do?

My ipod will not do anything but show a screen that asks to "connect ipod to computer, use itunes to restore" My computer however will not recognize my ipod at all so there is no way to restore my ipod. I am not skilled in computers but if anyone has a step by step that would be great.

Did you try a hard reset with the iPod still connected to your PC? Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

How to run a remote windows dll files and the drivers of the system using j

Dear Friends,
I need some valuable info regd how to run a remote windows dll files and the drivers of the system using java
reply regd thanking you

Please don't make duplicate posts like this.

How to connect to Digital Camera using JMF?

How to connect to Digital Camera using JMF?
Any example?
thx

If the DC has a mode that works like a web cam, and can generate either a VFW or DirecShow stream, then you could capture a frame of the stream, yes.

How to connect to remote computer using ARD and AE

Similar Messages

Maybe you are looking for