How to connect to router

How do I physically connect my new Time Capsule to my Verizon Fios router? Also does Time Capsule use the Verizon Fios router encryption or does it have its own encryption?

Sorry, but we are getting conflicting info here.
On one hand you say that you only need the TC for backups. If that's the case, you won't be creating a wireless network at all....the wireless will be turned off.
Can I just extend the network I have?
That gets tricky because you are trying to get wireless routers from two different manufacturers to work together. The first question is what kind of wireless security the Fios router is using and whether the Time Capsule has a match for that setting.
To "extend", the Time Capsule would be located a few rooms away from the Fios router. You still have to connect the Time Capsule to the Fios router using a wired Ethernet connection.
Before we even start to explore the possibility, are you able to run the Ethernet cable at least a few rooms away to the area where you want the Time Capsule to "extend"?

Similar Messages

How to connect a router to Ethernet 2 on my G5 so I can share a VPN connection?

Hi,
I have my Mac Quad G5 connected to my CableModem/Router/WiFi(we'll call it Router#1) that my ISP gave me on ETHERNET 1.
Now what I want to do, is connect a different Router/Wifi (we'll call it Router#2) to ETHERNET 2, like connect the WAN port of the router to the G5 Ethernet Port 2.
- I want to do this, so I can broadcast via Wifi (a different SSID than Router#1) what I SHARE on that ethernet port 2 through this Router#2 I mention above.
Specifically, I will go into Internet Sharing and select VPN to ETHERNET 2, so that I can output a VPN tunnel to the WAN of Router#2 and have it broadcast access via NAT to that tunnel, so my SmartTV, and other wireless devices have an access point to connect into the tunnel.
Can this be done? And how do you do it?

I do not know about VPN setup. It's an advanced configuration.
A picture of this configuration would be help. Draw on paper & scan. Use a graphics program. Click on camera to imbed png. image.
I added a second wifi router because my free verizon router support only WEP which is worthless.
Caused all sorts of confusion when I had my iMac g3 connected to verizon and my laptop connected to my 2nd router. I could not share files between my two machines. I had to connect both machines to router 2. I had to reconfigure the firewall on my iMac.
I have my Mac Quad G5 connected to my CableModem/Router/WiFi(we'll call it Router#1) that my ISP gave me on ETHERNET 1.
What is Ethernet 1? Is it the name of your 1st wireless network? Is it you isp's ethernet? Is it port 1 on your router?
Now what I want to do, is connect a different Router/Wifi (we'll call it Router#2)
I get this.
to ETHERNET 2.
What is Ethernet 2? Is it port two on router 1?
What is router2 connected too?
I assume that router 2 is connected to port 2 on router 1.
Specifically, I will go into Internet Sharing and select VPN to ETHERNET 2, so that I can output a VPN tunnel to the WAN of Router#2
What is this about? This implies that router 2 is connected to your g5.
Robert

Question in ACS radius ports and how test connectivity between router

hi all
im asking here about default ports used in cisco acs for radius protocol
is it 1812 and 1813 ???
or there is another ports ??
Q2-
how to test connectivity between ACS "server aaa" and the router "client aaa " ??????
Q3-
can anyone give me simple config on router for radius protocol to connect acs based on radius protocol ?
regards

The default authentictaion port is 1812 and the default accounting port is 1813.
Here's an example config-
aaa new-model
aaa group server radius ACME-RADIUS
server-private 192.168.1.5 auth-port 1812 acct-port 1813 key SeCrEtPaSsWoRd
aaa authentication login default local
aaa authentication login ACME-AAA group ACME-RADIUS local
aaa accounting send stop-record authentication failure
aaa accounting exec default start-stop group ACME-RADIUS
line vty 0 4
login authentication ACME-AAA
You can test with-
test aaa group radius server 192.168.1.5 mmessier St@nleyCup
where mmessier is your username and the password is St@nleyCup

DualPhone 3088 - how to connect to router with WEP...

Am i blind or does this device not have an interface to enter router security key. Am i missing something? Does it need unrestricted access?? Someone please tell me i didn't just waste 100+ on something that isn't aware of basic router security.

haha this sucks

How to Connect router WRT54G to router WRT54G

I already set-up router WRT54G as A, this router is running with the modem DSL connection. Now i buy the other WRT54G router as B. How to connect this router B from A. I connect it by LAN Cabling use UTP cable. But nothing happen. Please help me to connect... Thank you

I already set-up router WRT54G as A, this router is running with the modem DSL connection. Now i buy the other WRT54G router as B. How to connect this router B from A. I connect it by LAN Cabling use UTP cable. But nothing happen. Please help me to connect... Thank you
From router A (connected to the DSL device),
use one of the LAN ports.
Take this cable to the WAN port on WRT54G "B".
Visually check to see that the "LAN" LED corresponding to the port # you connected to on unit "A" is lit,
and visually check to see that the "WAN" LED on unit "B" is lit.
If the lights don't come on, use a crossover cable (I don't recall if the 54G has a straight thru / crossover switch in the rear of the unit).

How to connect laptop to router by using udp receiver

I try to communicate between computer and laptop via router. Computer connect to router by wire. laptop have Wireless Mini Card. I open udp receiver to connect to router. How to connect to router ? what is net address number ? and what is port number ? how to find them ?

You can only connect to a router port if the router is running a service that
Allows you to do so. What kind of connections are you trying to do?
The net address is the ip address in u32.
The port is determined by the service you want to access.
What do you actually want to do with all this?
We need much more info. Router model?
LabVIEW Champion . Do more with less code and in less time .

How I can connect to router without enterign enable- privilege mode 15?

I don't want ot enter enable mode->privilege mode 15
I want to connect from console to router with entering privelege username and connect to router.
How I can do this?
Thank you

I should do this with aaa-new model and use local username and password

How to connect printer wireless i dont have wirelee router? my printer is deskjet 4625

i m unable to connect my printer wireless and generate code for registering at eprint.how to connect printer wireless i dont have wirelee router? my printer is deskjet 4625. please suggest ? i have installed printer on my computer and laptop. computer is having w-7 os and laptop is having w-vista.
thanks
p.h.thakur

That is not correct sabretooth04,
The Deskjet Ink Advantage 4625 only support USB or Wi-Fi, it does not provide any Ethernet connectivity and therefore a Wireless router is essential for the web services to work.
The specifications can be found in here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149922&tmp_task=prodinfoCategory&cc=us&dlc=en...
ichleiben57 - As your printer only support wireless connection you will either need a wireless router, bridging your wired ADSL router with a wireless access point or replacing the printer to a different model which support wired ethernet connection.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to install wired printer via rj45 on Extender RE2000 connected to router EA6700

Hi,
I´ve installed a new network at home but I´ve problem when trying to connect my printer to my RE2000.
Someone who know how to do?
// Kent

If you have not setup the extender yet, you typically connect it a computer first and configure.
FAQ for RE2000
3. How can I set up the RE2000 to connect to my router or access point?
There are three (3) ways to set up the RE2000:
i. By running the Setup CD that comes with the device. For instructions, click here.
NOTE: If you do not have the Setup CD, you can download the setup software from the Linksys Support Site.
ii. By using the Wi-Fi Protected Setup™ (WPS) button on the range extender if your router also supports this feature. To learn how to connect devices using this feature, click here.
iii. By configuring the device through the web-based setup page. To learn how, click here.
You will most likely want to assign the printer/extender a DHCP lease/reservation. Will make printing to it later faster and more consident for mutliepl different OS (Win/OSX/Linux/BSD/iOS/...). Otherwise the computer printing will have to query the network to find it. You can get by without it, just little easier.

How to connect printer, win laptop, & anroid phone through router

Without knowing the specifics.
Cloud Print.
http://www.google.com/cloudprint/learn/

How to connect printer, win laptop, & android phone through router
This topic first appeared in the Spiceworks Community

How to find hard drives connected to router on my mac

how to find hard drives connected to router on my mac

Hello Thatguy1233,
It sounds like you have a Time Machine back up of your computer that you would like to restore. You may be able to use the following article to restore that backup:
OS X Lion: Recover your entire system
http://support.apple.com/kb/ph4351
Make sure your Time Machine backup disk is connected and turned on. If your backup disk is on a network, make sure your computer is on the same network.
Choose Apple menu > Restart, and then hold down the Command (⌘) and R keys while the computer restarts.
Select “Restore from a Time Machine Backup,” and then click Continue.
Depending on your type of backup disk, do one of the following:
If you use an external disk, select it and click Continue.
If you use a Time Capsule, choose your AirPort network from the AirPort menu on the right side of the menu bar, and then select your Time Capsule and click “Connect to Remote Disk.”
If you use a network disk, select it and click “Connect to Remote Disk.”
If necessary, enter the name and password you use to connect to your backup disk, and then click Connect.
Select the date and time of the backup you want to restore, and then follow the onscreen instructions.
After you restore your system from a Time Machine backup, Time Machine may perform a full backup at the next scheduled backup time. This is normal. Time Machine resumes incremental backups after the full backup is completed.
Thank you for using Apple Support Communities.
Take care,
Sterling

TS1398 How to connect iPad to private router not connected to the internet?

I have an iPad 2 running iOS6.1 that will not connect to my Asus RT-AC66R router when the router is not connected to the internet. The message I get on my iPad is "The cable for ethernet is not plugged in". This also happens with my iPod gen 5.
I'm trying to control Philips Hue bulbs with their Zigbee bridge connected to the router, but I do not want a connection to the internet. The Hue app works with an Android phone and an older iPhone 4 running an older iOS version without the router connected to the internet. The newer iOS6 seems to want to have access to the internet, but having internet access should not be required for this application.
If I do connect the router to the internet, the Hue app works on my iPad2 and it continues to work for a couple of minutes after I disconnect the internet cable. Then I get the message "The cable for ethernet is not plugged in" again. I'm doing this at work where I'm not supposed to connect the router to the work network cable, else it wouldn't be an issue.

mrogers641 wrote:
How can I install Mavericks on a Mac that is not connected to the internet? Is there a way to copy OS 10.9 to a USB drive an then install it?
Log in to another computer, family's or friend's, and download it to a USB drive, using YOUR OWN Apple ID and then install it onto your Mac. Preferably you could use someone else's WiFi connection to directly download and install on your Mac,
Cheers
Pete

How do I connect WRT54GS Router to Talk Talk MT882?

I was able to set up my Talk Talk wired SmartAX MT882 modem but I now want to use my Linksys Wireless-G WRT54GS Broadband Router but it can't connect.
I entered the Talk Talk setup using the setup cd.
I then used the Linksys setup cd to connect the router.
But part way through the setup I get a message saying:
The router is not able to connect to the internet. Try turning the cable/DSL Modem Off and back On again.
Did that and nothing changes. Still the same message.
I've seen on a couple of forums that you should change the internet connection type of the SmartAX MT882 to Pure Bridge and the Linksys WRT54GS to PPPoE.
That doesn't change anything.
After having connected the Modem to the computer with the Ethernet cable vis the ethernet port I then take that out and place it into the internet port on the router and connect the other ethernet cable from one of the numbered ports(1-4) on the router to the ethernet port on the modem.
It seems that the modem has to be connected directly to the computer?
I'm completely stuck on what to do.

To get the Huawei SmartAX MT882 and the Linksys WRT54G to work together, you need to disable a DHCP server on one of the two (cause they are both routers, in this case we will disable the DHCP on the WRT54G). First leave the MT882 turned off and disconnected from the network for now. Connect to the WRT54G at http://192.168.1.1 with username and password set as "admin" unless you changed it beforehand. On the first page disable the DHCP server and change the address of the WRT54G to 192.168.1.200 (We are going to keep the IP within the same subnet as the MT882 but outside the range of the MT882's DCHP range). You will also need to switch the Advanced Dynamic routing on the WRT54G to the Router mode meaning that there is another router on the network. Also in the advanced dynamic routing mode turn on the the Dynamic Routing (RIP) to LAN+Wireless because we will plug in the MT882 into the LAN port (Not the WAN/Internet port) of the WRT54G. Disconnect from the WRT54G network. Plug in your MT882 directly into the computer via Ethernet or USB and log into the administration panel via http://192.168.1.1 if connected via Ethernet or http://192.168.1.2 if connected via USB. User name and password are both "admin". In the MT882 administration in the advanced setting turn on/enable RIP (Dynamic routing) for eth-0 (its most likely already enabled for ppp-0, ie. your provider, but now it is enabled with the Ethernet too). Now connect the MT882 Ethernet cable directly into one of the WRT54G's LAN ports and connect to the WRT54G with your computers via wireless or lan. Now once the computers are connected they will ask for an IP address and the WRT54G will forward them to the MT882's DHCP server for an address and thus you will get multiple computers through wireless connected to the MT882 and the "Internet". Good luck.

How to connect a Sony Bravia TV to the internet through your Airport network

Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

I have now had a detailed reply from Sony Europe and the way to do this is to:
1.       Press Home on the TV Setup
2.       Use the right and left arrow to select Setting.
3.       Use the up and down to select Network, press Enter.
4.       Select Network Setup.
5.       Select Wireless setup.
6.       Select Scan
7.       Select your network
8.       A new screen will appear asking for entering the security key.
9.       Enter your WPA2 key.
10.   Select Enter.
11.   It will take you back to the same screen asking for entering the
security key.
12.   Press the right arrow.
13.   Select Auto.
14.   Press the right arrow.
15.   Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

How to connect to router

Similar Messages

Maybe you are looking for