How to connect to the internet

I installed Solaris Express Developer Edition 9/07 yesterday.I have a ADSL USB modem AT-AR206.I want to know How to create a connection to the internet

O.P.
You connect your Solaris PeeCee to the Internet in the same way you should be connecting your MS Windows PeeCee.
Your ISP connects to the high-speed modem.
The modem connects to a router.
You configure the router to communicate with the ISP including any special PPoE setup.
You connect your computers to that router.
The router does all the hard work and its mere existance gives you an additional hardware firewall to shield you from the bad guys out there.
If the retail prices of routers are high in your local stores, then get one from an online auction web site. Ebay is an example of such a web site.

Similar Messages

Mac OS 9.1 How to connect to the internet

How do I connect to the Internet with PPP (dial-up access and a modem? What are the procedures. I am using a OS 9.1.
Please help.

Well, first you need an ISP=Internet Servce Provider to provide you with internet service.
You can then go to your Mac OS Help Menu for detailed instructions. You will need to make the connection through your TCP/IP Control Panels.
If you run into problem you can check Knowledge Base Article http://docs.info.apple.com/article.html?artnum=106871 Mac OS 8, Mac OS 9: Troubleshooting a Dial-Up/PPP Internet Connection.
Post back if you run into any problems. Knowledgable users still using dialup service and/or know more about it than I do will be able to help you.
Good luck!

How to connect to the internet using ethernet

I have an iMac 10,1 and am unable to connect it to the internet using an ethernet cable.
I have a more recent Mac Book and I just plugged in the ethernet cable to it, clicked the setting in Network settings, and I was connected.
On the iMac it keeps saying, diagnostics can't fix it etc..?
On the left panel in Diagnostics, Ethernet has a green light, Network Settings an orange light, and ISP a green light (internet and Server are Red).
I'm using Comcast cable, and they just say the settings should appear automatically on a Mac (which they apparently did on my Mac Book!)
Any suggestions, appreciated.
Alan.

From the menu bar, select
           ▹ System Preferences... ▹ Network ▹ Advanced ▹ TCP/IP
What values are shown for the following?
          Configure IPv4
          IPv4 Address
          Subnet Mask
          Router

How to connect to the internet with ASA 5515 X?

Hi all:
I just got my new ASA 5515 X firewall and I got stuck in the first steps.
I can ping a public IP (8.8.8.8) from the device but I cannot ping it from my LAN.
I know I am missing either NAT rules or Access rules or maybe both, but I need some help, please.
Thank you.

ciscoasa# sho run
: Saved
ASA Version 9.1(2)
hostname ciscoasa
enable password djMW8L3Na14L7q2L encrypted
names
interface GigabitEthernet0/0
nameif OUTSIDE
security-level 0
ip address 10.9.251.2 255.255.255.0
interface GigabitEthernet0/1
nameif INSIDE
security-level 100
ip address 10.9.250.2 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
<--- More --->
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
management-only
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
ftp mode passive
<--- More --->
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network inside_net
subnet 10.9.250.0 255.255.255.0
pager lines 24
logging asdm informational
mtu OUTSIDE 1500
mtu INSIDE 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any INSIDE
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network inside_net
nat (INSIDE,OUTSIDE) dynamic interface
route OUTSIDE 0.0.0.0 0.0.0.0 10.9.251.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
<--- More --->
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
class-map inspection_default
<--- More --->
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
<--- More --->
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: end
ciscoasa# sho runpacket-tracer input inside icmp 10.9.250.3 0 0 8.8.8.8 detailed
Phase: 1
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in   0.0.0.0         0.0.0.0         OUTSIDE
Phase: 2
Type: NAT
Subtype:
Result: ALLOW
Config:
object network inside_net
nat (INSIDE,OUTSIDE) dynamic interface
Additional Information:
Forward Flow based lookup yields rule:
in id=0x7fff293db020, priority=6, domain=nat, deny=false
   hits=22235, user_data=0x7fff2a6a3810, cs_id=0x0, flags=0x0, protocol=0
   src ip/id=10.9.250.0, mask=255.255.255.0, port=0, tag=0
   dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0, dscp=0x0
   input_ifc=INSIDE, output_ifc=OUTSIDE
Phase: 3
<--- More --->
Type: NAT
Subtype: per-session
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0x7fff29b804b0, priority=0, domain=nat-per-session, deny=true
   hits=26730, user_data=0x0, cs_id=0x0, reverse, use_real_addr, flags=0x0, protocol=0
   src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0
   dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0, dscp=0x0
   input_ifc=any, output_ifc=any
Phase: 4
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0x7fff2a633a90, priority=0, domain=inspect-ip-options, deny=true
   hits=25709, user_data=0x0, cs_id=0x0, reverse, flags=0x0, protocol=0
   src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0
   dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0, dscp=0x0
   input_ifc=INSIDE, output_ifc=any
<--- More --->
Result:
input-interface: INSIDE
input-status: up
input-line-status: up
output-interface: OUTSIDE
output-status: up
output-line-status: up
Action: drop
Drop-reason: (nat-xlate-failed) NAT failed
ciscoasa#

CS5 Mac Kuler - Not connected to the internet

Hi,
I am having problems using Kuler on my Mac. I have CS5 master collection installed but Kuler just does not work. A colleague has the same suite installed and his Kuler works just fine! We have tried re-installing the suite but to no avail.
We have tried copying my installation on to his machine, as well as copying all preferences. But still it doesn't work!
We are completely stumped and require some assistance.
The machines does have internet access and I also have CS4 installed and Kuler works fine, it seems to be limited to CS5 and just on my machine.
Any ideas on how we can fix this?
Regards,
Rob
*MODERATOR COMMENT* The source of the problem seems to have been identified. See the post by employee Carey Burgess on February 2nd for details:
http://forums.adobe.com/message/3443382#3443382

@luckynorth and anyone else still facing this problem:
I'd like to help you all get this fixed.
At present, I do not have any issues getting connected to Kuler via any Adobe CS5 application on Mac OS or Windows.
I did before, and it was because I had disabled Internet access to my Adobe applications. Just in case any of you had this same restriction, I posted the fix for this in my reply above.
Everyone, please check that you don't have online access disabled for CS5. In Windows, this is controlled by a registry entry; on Mac OS, it's controlled by a plist file. See this document for details:
http://go.adobe.com/kb/ts_cpsid_84665_en-us
After you have verified that the plist file doesn't exist or is set to a value of 1 on Mac OS, or the registry value is set to 1 on Windows, reboot your computer, and see what happens.
If it's still not working, then reply with the following details:
- What specific operating system you are using.
For Mac OS, include the exact version, like 10.5.8; you can get this by going to Apple > About This Mac.
For Windows, I mean XP, Vista, or Windows 7, any service packs, and also 32-bit or 64-bit. You can get these details by going into System in the Control Panel.
- How you connect to the Internet.
Wired or wireless?
Either way, are you at home, or at work/school (or otherwise connected to some kind of larger network)?
- Have you installed all updates for your CS5 applications?
Open a CS5 application, go to Help > Updates (or Help > Check for updates), let it check for updates, if any are found, install them, if none are found then note that.
We'll get to the bottom of this; we just need to find out what about your computer/configuration that isn't allowing it to connect properly.

How do I connect to the internet with Airport for the first time?

I just got my Airport express and I've been trying to configure it to connect to the internet but it doesn't work and I can't find info on the configurations. I have an ethernet "modem" which I used to connect the cable coming from it to the computer and now I connect it to my Airport. Although the green light is on and in network preferences, it tells me I'm connected to the internet, I can't browse the internet with Safari, etc. I've been trying to find information on how to configure the base station in Airport Admin Utility but there is no specific information. Is there anyone who could help me telling me how to set up the IP adress, if I need one, DHCP, preferences in Airport Admin Utility?? If the ethernet cable is connected to the computer directly I don't need a user ID or anything... It's all setup automatically.

As a minimum, in order to gain access to the Internet with an AirPort Express base station, you will need an Internet Service Provider (ISP) AND an Internet modem or gateway device.
What is the make & model of the Internet modem or gateway device that you have the AirPort Express directly connected to by Ethernet? What exact model of Express do you have?

How do I connect to the internet with my new IPAD ?

How do I connect to the internet with myt new Ipad

See here for connecting to the Internet:
http://support.apple.com/kb/HT1695
If you have any problems there is troubleshooting advice here: http://www.apple.com/support/ipad/wifi/

How do i connect to the internet with my ipad?

how do i connect to the internet with my ipad?

Did you turn WiFi on in the Settings App? If WiFi is turned on, your iPad should be able to see any WiFi networks that you can connect to and you should be able to tap on one of those, enter a password if needed and then tap the join button.
I get the feeling that you know this and the problem needs further explanation so ... Can you explain in more detail?

How do i connect to the internet with apple tv

how do i connect to the internet with apple tv

Ethernet cable from your router, or configure wifi in Settings.

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

How to authorise a computer that's not connected to the internet?

i use my the computer in my studio to watch dvd's all the time - who needs a tv when you've got a cinema display? the thing is, i recently purchased some tv episodes from itunes to watch on my studio computer - however, when i try to play them, i get that "this computer is not authorised to play blah blah bah" message. i also get this when i plug my ipod into itunes and try to play my itunes purchased tracks via this computer. when i try to sign in so as to authorise it, it tells me no network is detected.
well, thats because this particular isn't connected to the internet. it's old, it doesn't have wifi, and it's my work computer, so i dont want internet on it anyway - i'd never get anythong done!
so, with most programs requiring you to register/autorize your computer, there's always an option for "if this computer isn't connected to the internet" . however, i didn't see how to use this option for itunes.
which is odd, since every other company in creation has this option right there on the authorization screen.
for the record, i DO NOT WANT TO PUT THIS COMPUTER ON THE INTERNET. it's kind of old, and therefore delecate. so disentangling it from the various studio equipment it's attached to and moving it, along with the big cinema display, to the upstairs room where the ethernet cable is, will not only be a giant pain in the *$$, but also will quite possibly break something - like i said, it's old, it's bones are brittle and it has arthritis and it's happiest left right were it is - to move it is, i believe, to invite disaster.
but i'm confidant apple has provided a solution for this, seeing as all the other software companies i purchase from have managed to so, anyone know how to do this?

"No it is not reasonable. As stated by Jobs in his 'We hate DRM' letter, they are forced to keep the DRM as uncrackable as possible. So this stuff has to remain in an online state."
itunes seems to be bending over backwards on this. amazon.com doesn't seem to have this problem for one.
"you would find that nearly any sofwtare with some kind of offline registration scheme is easily cracked."
i dont spend that much time digging around for cracked software (i prefer to pay for it) but to the best of my knowledge the software i'm thinking of isn't easily available in cracked form. their registration/authorization process is vigorous, but still includes an offline option.
"Nope. Wrong. Notice how it only their music that has these online restrictions and that none of Apple's other software does this. The difference as explained above is clear. Apple has their hands tied on the matter for now."
i probably wouldn't be half so pi... annoyed if my macbook didn't just break down a week after the warrantee ran out. apple's free pass on their weaker points has expired as far as i'm concerned. i suppose there will continue to be disciples, but i'm about ready to sell all 5 of my apples and switch to the darkside.
anyone want a black ibook with a broken dvd drive and no warrantee? going cheap, yours for 30 pieces of silver.

How on earth could I be connecting to the Internet through my airport express when it is not connected to anything?

I'm not entirely displeased with the situation but I cannot see how I could be connecting to the Internet through my airport express when the Airport is not connected to anything.
Weird huh?
I have a separate non- Airport wireless network connected to the Internet. I had previously set-up the Airport to link with this network but disconnected it (by resetting it) as music streaming was unlistenable due to frequent drop out. I now just have the Airport Express as a standalone wireless network only connecting to the stereo to stream music from devices.
My devices are only connected to the Airport network with cellular data off. Yet I can still connect to the Internet AND listen to streaming music (without drop-out no less).
I don't want to fix it but I would like to know how the frag it could happen so i don't screw it up accidentally.

I would say you still have something of the previous setup.
To be sure you don't mess up, save the configuration.. go to the top menu area of the airport utility and export configuration.. which will land on your computer.
Now you can recover at anytime to the current setup.
How it works.. that is magical ..
Open the airport utility.. edit.. and take a screenshot and post it of the following pages..
Internet wireless network
THen we can tell you how it is working.

How to connect HP Officejet Pro 8610 to a Laptop that's not connect to the internet

Just bought the HP Officejet Pro 8610 all-in-one for the local Historical Society. Neither the laptop nor the printer will be connected to the Internet. The printer will only be used for printing reports, scanning images, etc.
I have just removed the instruction manual to familiarize myself with the connecting procedure but I notice there are several references that require internet access.
Is there a work-around that allows me to install/connect the printer without requiring access to the internet?
Thank you in advance for your help.
This question was solved.
View Solution.

Hi,
How many computer will be using the printer ? If only one the USB (you may have to buy a cable) is the way to go. You can also use wireless direct to print but this is not reliable:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00577405
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help!

My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help! How do i turn it on without finding it because she can't remember where it was.

That is so dumb...Apple is the best and most techinological company IN THE WORLD and they don't have the time to invent something like that? HUH? All they are worried about is making the "Worlds best Phone" and they can't take the time out to help their users or anybody that has their products. All they have is "Find mt Iphone" Well they should step up and do something else to help people like me out. Find a way to turn it on and you can find it or find a way to turn it on remotely.
Thank you for your replys

When I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet. How can this be and how do I fix it?

when I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet. How can this be and how do I fix it?

Does the iPod connect to other networks?
Do other device connect?
Did the iPod connect to this network before?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How to connect to the internet

Similar Messages

Maybe you are looking for