How to connect to Time Capsule

Hi,
I lost my connection to my Time Capsule. In Airport Utilities everything seems fine, but via my MacBook, I can't find the Capsule.
Please help med with troubleshooting!
Kindest regards,
Fredrik

Did that but still no TC visable.
It's so strange this.
It's obiously in the Airport Utility, but I can't find the disk.
Suspect that there is a simple box to tic somewhere...
Keep posting advice

Similar Messages

  • I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help, thanks.

    I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help?  thanks

    Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
    To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
    Press and hold in reset until the front LED flashes rapidly.. about 10sec.
    Release the reset.
    Open the airport utility and setup the TC to bridge mode.
    The actual method depends on version of the OS and airport utility you use.
    This is version 5.
    Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
    Then setup wireless.. you have a number of choices here.
    Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
    Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
    Update the TC.. unplug fromt the computer and plug it into the homehub.
    If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

  • How to connect a Time Capsule to an existing Airport Extreme?

    I have an Airport Extreme connected to my broadband internet modem. This Airport Extreme is also connected to my audio system to be used by iTunes.
    Recently I brougth my Time Capsule from another location to be included in the Airport Extreme network. I want to continue using Time Machine on the Time Capsule, and iTunes on the Airport Extreme.
    I could get this to work, by connecting the Time Capsule to my modem, and setting it up to extend an existing network (the Airport Extreme network). Airport Extreme and Time Capsule are situated next to each other. However, performance of Time Machine was horrible, far too slow. If I connect my MacBook to the Time Capsule by an ethernet cable, it does not work.
    When I set up the Time Capsule to create another wireless network, performance of Time Machine is okay. I cannot use iTunes on the Airport Extreme in that case. I have to switch networks for that.
    I'm sure it should be possible to have both an Airport Extreme and a Time Capsule in one network, use iTunes on the Extreme, and Time Machine on the Time Capsule. But I do not know how it should be arranged.
    Can anyone solve this problem?
    Greetings from Holland, Koen

    +What surprises me is that with setting 1 (TC joining AX) the Time Capsule has an option to extend the range of the network being joined.+
    Yes, but it will only "extend" if you have a newer version of the AirPort Express, the 802.11"n" version. If you have an older "b/g" version of the AirPort Express, you can set the Time Capsule to "extend", but it won't and you'll have problems.
    +With setting 2 (AX joining TC) the Airport Express does not seem to have this option.+
    This probably confirms that you have an older "b/g" version of the AirPort Express. It does not have the "extend" feature.
    +Could it be this option (which I did not switch off in my earlier experiments) which gave me such terribly bad transfer rates to my Time Capsule harddisk?+
    That's probably the reason since the older version of the AirPort Express cannot be configured to "extend".

  • How to connect a time capsule with an ATT Elevate Hot Spot

    Hi,
    Need help connecting my time capsule to my ATT Elevate Hot Spot....since I have no ethernet connection.
    Thanks!

    Not sure how much we can help on this, but as a test, if you turn off the wireless on your MacBook and connect it to the router using an Ethernet cable, you should be able to log onto the Internet.
    If you can, you know the Ethernet connection is working, and it will be a simple matter to connect the Time Capsule to the router and get it set up.
    If you cannot get an Internet connection when you connect the Mac directly to the router, then more troubleshooting will be required.

  • How to connect a time capsule to another network

    I have recently moved to an area that has no landline system, all ISP's are provided through a wireless router. How should I connect the timecapsule into such a network?
    Regards,
    Martin

    Unfortunately, the Time Capsule was not designed for this type of operation.
    Ask the network administrator if they can provide you with, or recommend a wireless to Ethernet bridge, so that the Time Capsule can receive the Ethernet signal that it wants.
    It might be possible to configure the Time Capsule to "join" the wireless network in Bridge Mode.......but, even if that might be possible, the big downside here is that you would be setting up what is known as a "double hop" wireless situation with the Time Capsule.
    If you do not understand that term.....please post back for more information.

  • How to connect to Time Capsule over internet when TC is not router?

    Hi
    I purchase my TC 2 days ago in order to both back up my files and to be able to access files stored in TC over the internet.
    After some time (and frustration!) I found that TC cannot be used as a router with sky broadband. This is confirmed by Sky technical help line and via this forum
    http://store.apple.com/uk/question/answers/product/MD032B/A/can-i-use-time-capsu le-with-sky-mrouter/QCXY9XJPFFYHPHTKK
    So I connected my TC to my router via an ethernet cable. I can back up using my mac book air running the latest mountain lion. My problem is that I cannot tick the "share disk over wan" option in Airport Utility which I think I need to do before I can access files over the internet. This option just doesn't appear and reading other forums, I think it is because my TC is not the router.
    Is there some work around or configuration that will allow me to get that option to tick or to able to access my files on the TC over the net?
    Ultimately, I would like to access my TC files using my ipad.
    I am not much of a techie
    Thanks!

    The TC should be in bridge mode.. in bridge there is no WAN port.. so you cannot tick to share files over WAN because there isn't one.
    But you can still share files.. there is nothing in the documentation for BTMM and iCloud that says the TC has to be the main router.. although doubtless it will make it easier.
    How exactly are you trying to access the files now??
    If you are not using BTMM and iCloud please describe what you have done.
    It is no problem if you have a fixed ie static public IP to access the TC even without BTMM.
    There is plenty of descriptions of the method around the net.. just google it.
    Here is one I have used.
    http://gigaom.com/2009/05/14/access-your-time-capsule-over-the-internet/
    The TC is indeed bridged in this case.
    You simply forward port 548 from the sky router to the TC.
    Ultimately, I would like to access my TC files using my ipad.
    This is where life starts to get hard.. to access the files you need AFP files protocol which ipad does not use.You cannot use ipad to get files at all from the TC without a file browser.. the vast majority of which use SMB protocol which will not work over the internet in most cases. ( it is too big a security risk).
    There is only one file browser I know of for iPad that is AFP based. file connect.
    https://itunes.apple.com/us/app/files-connect/id404324302?mt=8
    But I am not sure if it will work over BTMM.. to get files remotely.
    Nevertheless if you have a connection remotely to the TC by direct means you may be able to access files.
    I have done it with a MBP sharing files on a bridged TC, to a person on the other side of the world. No issues and as long as you have a static public IP it is easy.
    If you don't then see if it is cheap to buy one.. some ISP will offer static IP for a single charge of $20 or something.
    Some want $10 a month.. that is too much.
    Or use DynDNS in the sky router. That is the way we get around dynamic IP most people use.
    Just look up your sky router manual for dynamic DNS servers it supports.
    I am iPadless.. and probably willl remain so for the foreseeable future.. so I cannot test it for you. IMHO internet security does become an issue with this sort of thing. There are other means to be considered.. namely vpn.. which I know the iPad and Macs support but the TC has not got vpn endpoints available. 

  • How to connect my time capsule & macbook to the internet?

    I purchased a Time Capsule last weekend to back up all my photos etc.  I was able to set up the Time Capsule with Airport Utility and now have my home network set up, I can easily get everything I need on my Macbook Pro (mid 2009, Mac OSX Lion 10.7.5 if that helps?) EXCEPT I can't get the time capsule to connect to the internet.  For some reason whenever I want to access my pictures or the time capsule, I have to connect to the wireless network but if I want to connect to the internet I have to reconnect to my old wireless network.  I have tried everything but just can't get it to work correctly! The Time Capsule light has only ever flashed orange at me...

    time capsule should be in bridge mode and plugged into your main router so it is part of the existing network.
    Bridge on you Lion version is easy as you can still download and install a real utility.
    http://support.apple.com/kb/DL1482

  • How to connect airport time capsule through wireless internet

    Just purchased an Airport Time Capsule but having trouble to connect it through my Macbook Air using wireless. Could you please help? many thanks

    Make sure the MBA has ipv6 set to link-local only for wireless.
    I strongly recommend using short names, no spaces and pure alphanumeric.
    eg TCgen5 and TCwifi
    In fact if you keep having wireless issues.. with the MBA in the same room as the TC, change the wireless name to TC24ghz and TC5ghz so you have different names for both bands and see if that doesn't help.. try to connect to this band and then the other.
    Use WPA2 personal security.. password 8-20 characters mixed case and numbers.. no non-alphanumerics.
    Do not hide the wireless.. that is against the code and simply leads to issues.
    If you still have issues.. post back.. does the MBA work ok on other routers or wireless access points??

  • How to connect airport time capsule to BT home hub 4

    I am finding it difficult to connect my new airport time capsule (ATC) to the BT home hub 4. On opening the time machine it asks me to configure the time capsule before using. Should I be using the ATC as time machine only or should I be re-routing wireless from the ATC.

    Make sure the MBA has ipv6 set to link-local only for wireless.
    I strongly recommend using short names, no spaces and pure alphanumeric.
    eg TCgen5 and TCwifi
    In fact if you keep having wireless issues.. with the MBA in the same room as the TC, change the wireless name to TC24ghz and TC5ghz so you have different names for both bands and see if that doesn't help.. try to connect to this band and then the other.
    Use WPA2 personal security.. password 8-20 characters mixed case and numbers.. no non-alphanumerics.
    Do not hide the wireless.. that is against the code and simply leads to issues.
    If you still have issues.. post back.. does the MBA work ok on other routers or wireless access points??

  • How to connect Airport Time Capsule to WD Live TV

    I recently bought an Airport Time Capsule with 2tb storage. I am wanting to access the media files I save to the Time Capsule on my WD TV Live. I have tried doing wirelessly and it works but if I shut my computer it disconnects and wont automatically connect to it even if my computer is open. I keep having to delete and readd the Time Capsule as a media share server everytime I want to access the files. What am I doing wrong???
    The bigger question I had is since the Time Capsule has a USB port and so does the WD TV, can I just connect them and access the files via usb to usb??? I dont mind using wifi to connect but if it can be done I would rather connect without wifi so that if my internet goes on the fritz I can still watch movies and stuff from the time capsule hard drive.
    Thank you all for any and all help!!!

    The media files on the TC are in what format? WD Live can read almost any format but it cannot read iTunes Libraries.
    There is a fairly long discussion already on getting WD to read movies from a TC.
    https://discussions.apple.com/thread/5226379?start=0&tstart=0
    Note the info there.
    eg SMB naming for the TC.. this is most important. Standard Apple names will be problematic at best.. useless and non-functional at worst. Make sure the WD Live sees everything in the network with standard windows names.
    The bigger question I had is since the Time Capsule has a USB port and so does the WD TV, can I just connect them and access the files via usb to usb???
    No, you cannot do that. The USB on the TC is for plugging in a printer or a hard disk. It has no access whatsoever to the internal disk.
    However the WD live can present its USB disk to the network. So if you simply plug a USB hard disk into the WD live. And you can then copy your movies to the WD over ethernet or wifi (ethernet is obviously faster) but once on the USB drive then it won't matter if the internet is off or even the local LAN and wifi is off as the WD can still play the movies. IMHO that is the best way to do it.

  • How do i connect my time capsule from outside my home? i dont have static ip

    sorry about my english...
    its been 4 months now and still I am not able to connect my time capsule via internet from outside . i have read enough forums and discussion but i am confused because every discussion has different answer. please anyone can explain me the simplest way to configure my time capsule so i can connect it from other computers. i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    some questions.
    1. is it possible to use time capsule as nas using dynamic ip address?
    2. if yes how and where can i get exact detail about this.
    3. how to connect my time capsule form my iphone,ipad or other computers . connect through ip address or something else?
    4. is it any simple installation way to do this? i heard about bonjour and icloud but dont know how to connect through this.
    please help me
    thank you
    sachin

    i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    Here is your primary issue.. you cannot connect with win7 ..
    Windows only offers SMB protocol which just about every ISP.. all responsible ones ...block..
    Time Capule offers AFP to internet and only AFP.
    You need to use a Mac to connect.. then use BTMM and iCloud as there is no dyndns in the TC anyway. (Actually there is a dyndns but only for apple btmm use...  you cannot access.
    If you want to or have to use windows.. then get a proper vpn router that offers vpn endpoints to windows and has dyndns.. setup the TC in bridge behind the vpn router and access via vpn .. this is the only safe way of connecting using SMB.

  • How do I connect my time capsule to iinet Bob ?

    How do I connect my time capsule to iinet Bob ?
    Just started with iinet naked ADSL, can locate/connect my time capsule - help please

    Bob is ok as a modem.. are you using voip?? If not bridge the bob and use PPPoE client in the TC..
    Or use Bob as a full modem router and bridge the TC.. either setup is much of a muchness.

  • I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    LOL!!
    I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
    Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
    Do a search on ebay.. 3g router.
    But you can get the TC to join a wireless network.
    It is a non-standard setup that Apple will not support.. the option is hidden.
    If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
    But please note the end result of this setup..
    very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
    In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

  • How do I connect my time capsule with a Lynksis wi fi netwotk?

    How do I connect my time capsule with a Lynksis wi fi netwotk?

    You cannot extend or repeat a non-apple router in an apple router..
    You must plug it in via ethernet and then setup roaming network (or if you like a completely separate network.. makes no difference from the TC point of view). TC is in bridge mode. That is router bridge not wireless bridge.. I gave the info on the other thread you are running.. very confusing when you ask in multiple threads.

  • How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

    How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
    I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

    Firstly how are you connecting to the TC.. wireless or ethernet?
    Please open a command window and ping it.. ping by name and by IP address.
    If ping succeeds at least by IP it should work.
    In windows explorer type
    \\10.0.1.1 (or whatever the TC ip is.. that is the default).
    Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
    7.6.4 firmware on the TC is useless. It works better on 7.6.1
    If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

Maybe you are looking for