How to connect to Visual Administrator?
Hi all!
I want to connect to visual administrator to configure BI JDBC Connector.
However the problem is that i don't know how to launch the Visual administrator.
On the step by step document, it's said that VA can be launched using the file "C:\usr\sap\(sid)\jc00\j2ee\admin\go.bat" but i think it isn't installed on the computer.
So may i have an advice or a way of installing it.
Thanks in advance.
Regards.
Lahoucine
Hi Lahoucine,
have you installed the BI Java components? If not, then there is no Visual Administrator on your server...
If yes, it is located in the folder as you descibed depending on the drive you installes the system (c: or D: or...), the <SID> which is the three-letter SystemID of your SAP system and the folder JCXX where XX is anumber between 00 and 99 (corresponding to the system number of your SAP System).
Hth,
Michael
Similar Messages
-
Procblem Connection with visual administrator
hai,
I want to connect with visual administrator , i created new connection with my localhost and portnumber 50000
but its giving error
Error while connecting
Cannot open connection on host: localhost and port: 50000
How can i solve this problemI think when you using visual admin to connect the server
you should use the port 50004 -
Error when connecting to Visual Administrator
Hi Experts,
Im getting this error when trying to connect to visual administrator...
Im basis, and already ask to the IT team to open the port 50004 so the Visual administrator can connect. Their answer was that the port is open waiting for a tool to ask to connect to it. I´ve been looking for info in regards this issue unsuccessfully, can't find anything. Any ideas????
Thanks in advance...Hi,
Administrator user may be locked you can unlock and then try to connect Visual Administrator and please read below link
Visual Administrator: Logon Failure (SAP Library - SAP NetWeaver? Problem Analysis Guide (PAG))
Thanks
Brahma. -
Error while connecting to Visual administrator - Server0 getting Restarted
Hi Experts,
Kindly help me to Tune the JVM Parameters For AS Java ( Enterprise Portal 7)
We are Having our Development Portal on a 32-bit Machine and recently we have migrated the same to a 64-Bit with SAP OS/DB. We are Using IBM DB2 9.1 Fix pack 2.
Now I have to Configure the Java Virtual machine (JVM) Parameters for the EP instance in the 64-bit Hardware. The Hardware details are as Follows :
Ram - 10 GB
Paging Memory - 25 GB
OS - Win 2k3 - SP2
HDD - 500 GB
Current JVM Parameters : For (Server0)
-XX:MaxPermSize=256M
-XX:PermSize=256M
-Xms2048M
-Xmx2048M
-XX:NewSize=171M
-XX:MaxNewSize=171M
Now when iam connecting to Visual Administrator (VA) with administrator it is connecting upto 20 % - 25 % and giving a error - (Ping Timeout - connection to server Lost) and the Server0 is Restarting.
i have modified Xmx and Xmx to 3072 and restarted the J2ee Engine. And now for some time it is ok and again giving the same error.
And modifying the Server0 JVM parameters is sufficient or we have to modify Instance --> Servers General JVM Parameters Too ?**
i Believe this is the problem with JVM Parameters. Correct me if iam wrong
Please Help me to solve this Issue
Thank in Advance
P.S.V Santosh Chaitanya
SAP Basis Consultant
Mobile - +91-9901121909Hi Santosh,
The some Memory parameter you set is not correct
-XX:MaxPermSize=256M
-XX:PermSize=256M
-Xms2048M
-Xmx2048M
-XX:NewSize=171M
-XX:MaxNewSize=171M
it should be as below
-XX:MaxPermSize=512M
-XX:PermSize=512M
-Xms2048M
-Xmx2048M
-XX:NewSize=320M
-XX:MaxNewSize=320M
pls check the note suggest earlier.
Thanks
Anil -
How to remotely access visual administrator in AIX system
Hi Friends
i want to remotely access visual administrator of my client system which is on AIX platform,can any one please tell me the step by step procedure of connecting to that system and then which command to use to start Visual administrator.
Like the way we do in windows remote desktop and run the go.bat file in the admin folder of the j2ee,similarly wat should i do to start this go.bat in this AIX system.
Any help would be appreciated and rewarded with points
Thanks and Regards
RashmiJust found the apex_access_control table in my schema.
Guess I'll just use that. -
"User authentication failed" when connecting with Visual Administrator
Hello,
I am having trouble making a connection to my local J2EE Engine using the Visual Administrator (VA).
I open the VA interface and create a new connection. The default User Name is "Administrator". I put in "localhost" for host, "50004" for port and leave the Transport Layer selection to "Default".
When I try to connect this way I get the following message:
User authentication failed
Next I went into Start|Settings|Control Panel|Users and Passwords and saw that there were several ids created by the Developer Workplace (DW) installation. The ids that I see are: j2eadm,sapadmin,sapinstall and SAPServiceJ2E
I checked all of them to see what groups they're members of and they're all at least members of "Administrators" group.
There are also 3 new groups that must have been created by the DW installation: SAP_J2E_GlobalAdmin, SAP_J2E_LocalAdmin and SAP_LocalAdmin.
The j2eadm id belonged to all 3 new sap groups so I changed its password to something I'd remember and then changed the connection to use that login.
When I tried to connect thru VA using this id and the new password I still get the "User authentication failed" error message.
Can anyone please tell me what I'm doing wrong?
Thanks in advance for any help.
David.Hi,
During the installation the SAPINST asks for a Administrator Password.. This password is very important.
We had kept same passwords for all userids to start with.
This helped reduce lot of confusion.
Warning: if you enter the wrong password 5 times, the userid 'Administrator' gets locked.
However there is an Emergency password recovery procedures.
Try this link
http://help.sap.com/saphelp_erp2004/helpdata/en/3a/4a0640d7b28f5ce10000000a155106/frameset.htm
Hope that helps
Regards,
Siddhesh -
How to start J2EE Visual Administrator
Hello:
Please guide me to start the J2EE Visual Administrator. I have EP 6.4 SP7.
Thanks
SriramHi Sriram,
run the go.bat file located in your C:\usr\sap\J2E\JC00\j2ee\admin and login as administrator and whatever password you installed EP with on port 50004 (default unless you changed it)
hope that helps
abdul -
How to create a new connection on visual administrator?
Would you please help give the details. Pints guaranteed.
Thanks!Read the Rules of Engagement. No double-posting.
-
Error in connecting to Visual Administrator
All of a sudden when I want to connect to the visual admin on my productive EP6 (/usr/sap/<SID>/JC<NR>/j2ee/admin/./go) after when I give my password an click on connect it does a little % connecting to database and than gives me the error:
! Error while connecting
When I click on the right sided ! it comes with the task error message:
Error while connecting
java.lang.NullPointerException
Nothing had been changed and in the night it worked but in the morning I got called by another engineer that he wasn't able to connect to the VA to do some changes SAP had given them to change.
Hope anyone had had this same strange issue and has a solution on itIt seemed that the logging of from the VA wasn't done correctly during some time (probably the did not first do a logout and than an exit, but exited right away)
After a stop and start of the portal I was able to login again without the error. -
Error while connecting in Visual Administrator
Hi all,
when I connecting in the Visual Admin, the following message occurs:
<i>"Error while connecting
java.lang.ArrayIndexOutOfBoundsException: 40".</i>
The percent bar is in 3%.
Whats happening?
Thanks,
Yuri
My environment:
EP6.0 SP19
j2sdk 1_4_2_12
Ms Windows 2003Hi Yuri,
chk out this link
/message/2924638#2924638 [original link is broken]
Reward points if useful
Thanks
Srinivas -
Unable to connect to NWA and Visual administrator
HI all - I have Java stack installed i at its own database which coexists with another ABAP stack on same virtual machine.
I am not able to connect to Visual administrator to install the saplicens. connection error is as follow
Unable to connect to hostname:50104.
I have checked the value of p4 using configtool and it is 50104.
I have 2 extra emergency users that I have created to make sure if do not face user errors. Since DNS is not resolving FQHN, I have updates /etc/hosts file in my pc to make sure there are no network issues.
The only error I see is in ms_dev which is indicating saplicense has been expired.
Any idea, how to solve this problem?
DB= Oracle 10.2.0.2
CRM JAVA 7.0 EHP1
CRM ABAP 7.0 EHP1
Instances CJX(Java instance) and CSX (ABAP)
Tnsnames Listener and tnscsx
Your help is appreciated.
Regards
KHi Sunny, Thx for taking a look. I think I am in right direction after checking the logs. I did not have a chance to configure UME afterthe install. I am not sure if I should use APAP stack as the source. In the same time, My license is expired and can not connect to NWA or Visual admin.
Here are the logs
System trace:
#1.#C0000A6717E800020000000001762FC700047ECE97733050#1265325676114#/System/Serve
r/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.Login
Task#######Thread[Thread-9,6,main]##0#0#Error#1#/System/Server/VisualAdministrat
ionTool#Plain###Error while trying to login to localhost: Cannot create new Remo
teLoginContext.#
Trace files:
#1.#C0000A6717E800010000000101762FC700047ECE910D3800#1265325568767#com.sap.engin
e.services.adminadapter.gui.tasks.LoginTask##com.sap.engine.services.adminadapte
r.gui.tasks.LoginTask#######Thread[Thread-5,6,main]##0#0#Error#1#/System/Server/
VisualAdministrationTool#Java###Error while trying to login to localhost: Cannot
create new RemoteLoginContext.
[EXCEPTION]
#1#com.sap.engine.services.security.exceptions.BaseLoginException: Cannot cr
eate new RemoteLoginContext.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<ini
t>(RemoteLoginContext.java:71)
at com.sap.engine.services.adminadapter.gui.tasks.LoginTask.connectActio
n(LoginTask.java:98)
at com.sap.engine.services.adminadapter.gui.tasks.LoginTask.run(LoginTas
k.java:81)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection
on host: 10.103.23.232 and port: 50104
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(
P4ObjectBrokerClientImpl.java:706)
at com.sap.engine.services.rmi_p4.ConnectionManager.getConnection(Connec
tionManager.java:257)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitia
lReference(P4ObjectBrokerClientImpl.java:154)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitia
lReference(P4ObjectBrokerClientImpl.java:113)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitia
lReference(P4ObjectBrokerClientImpl.java:109)
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<ini
t>(RemoteLoginContext.java:60)
... 3 more
Visualadmin console:
log generation timestamp : 2010_02_04_at_07_55_27
Feb 4, 2010 7:56:45 AM [1265291805268]:Error : Thread[Thread-9,5,main]
com.sap.engine.services.rmi_p4: com.sap.engine.services.
rmi_p4.Parser newRequest MSG:The possible problem is that there is no correctly
working server node available. Check your working servers
Feb 4, 2010 8:02:41 AM [1265292161634]:Error : Thread[Thread-23,6,main]
com.sap.engine.services.rmi_p4: com.sap.engine.services.
rmi_p4.Parser newRequest MSG:The possible problem is that there is no correctly
working server node available. Check your working servers -
Configuring Visual administrator
How can I configure visual administrator for connecting Oracle with web dynpro.What are the configurations required in Web dynpro?If anybody knows, please help me
Fahad,
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/ab/082484173ae045ab8dad8a41d33da3/frameset.htm">This</a> might help you.
Also,refer <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/83/565389b6ce4234b3633acb3f5b75f0/frameset.htm">Configuring a Database Connection</a>.
Bala
Message was edited by: Bala Krishnan -
User Authentication Failed via http BUT not with Visual Administrator !!?
OS : Win 2k3 Server UK * DB : SQL Server 2005
SAP Netweaver 2004s Application Java
Hi All,
Since a couple of days, I have a problem concerning authentication to the java apllication on a SAP Netweaver 2004s.
Using the user Administrator, I CAN logon the Visual Administrator tool, with the same user I tried to logon via http://host:port/nwa without success.
At the beginning, I was thinking about a problem of password then I enabled the emergency user SAP*, the problem was the same. Ok with Visual Administrator but not via http.
Here is two logs found in folder : D:\usr\sap\SID\JC02\j2ee\cluster\server0\log\system\
security.3.log
<i>#1.5#001871E5EA3A00550000006D0000172800043B836D838427#1191335570983#/System/Security/Audit#sap.com/com.sap.security.core.admin#com.sap.security.core.util.SecurityAudit#Guest#0####5aac137070f411dcc513001871e5ea3a#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest | LOGIN.ERROR | null | | Login Method=[default], UserID=[Administrator], IP Address=[192.168.10.125], Reason=[Authentication did not succeed.]#</i>
server.0.log
<i>#1.5#001871E5EA3A0052000000130000172800043B835E3661D1#1191335314249#/System/Server/SLDService##com.sap.sldserv.SldServerFrame######c1a349a070f311dcaa68001871e5ea3a#SAPEngine_System_Thread[impl:5]_71##0#0#Warning#1#com.sap.sldserv.SldServerFrame#Plain###Failed to collect SLD data. Failed to send HTTP data: 401 : Unauthorized. Please check if the target SLD system is available and the SLD bridge is started there.#</i>
 I tried to connect http://host:port/sld same problem User Authentication Failed
<b>Do you have an idea for me? Why a user can connect via Visual Administrator and not via the http interface?</b>
Thanks in advance
YvesHi,
I found the solution this last week-end.
This behavior let's thinking to a problem of authentication.
But the problem was in SQL, an index was missing in table J2EE_CONFIG, called J2EE_CONFIG_I3
Cheers
Yves -
How do I launch Visual Adm?
Hi
How do I launch Visual Administrator? Is it req to login only with Administrator only?
Thanks.Read,
http://help.sap.com/saphelp_nw04/helpdata/en/39/83682615cd4f8197d0612529f2165f/frameset.htm
regards
Juan -
Visual administrator stuck at 99%
Hi All,
While I try to connect to visual administrator in PI 7.0 , it is stuck at 99% and not connecting .
Ny help ? Where do I check the log where it is stuck ?
Please advice.
Thanks,
Sumanhi chittaranjan,
first you have to stop the SAP J2EE Engine. Under Windows, you can use the Microsoft Management Console for SAP Systems (SAPMMC). As an alternative or for UNIX systems, use the tool jcmon, which is located in the engine's /usr/sap/<SID>/sys/exe/run directory.
Note: You only need to stop a single server. You do not need to stop the dispatcher.
To stop the server using jcmon:
1. Start a shell or command prompt.
2. Switch to the directory /usr/sap/<SID>/<j2ee-instance>/j2ee/os_libs.
3. Execute the command
jcmon pf=../../../SYS/profile/<sid>_<j2ee-instance>_<host>
4. Enter 20 to start the local administration menu.
5. Enter 4 and then the process index number (not the PID) to stop the server.
Starting the SAP J2EE Engine in Console Mode
To start the server in console mode:
1. View the server's property file:
/usr/sap/<SID>/<j2ee-instance>/j2ee/cluster/instance.properties
This file contains the server properties in the form <key>=<value>, whereby each key is prefixed with an indicator. For example, for the key ID169739450.MaxHeapSize=128, the prefix is ID169739450.
2. Search for the entry <prefix>.Type=server and note the prefix.
We refer to this indicator as <prefix-server> below.
3. Start a new shell or command prompt.
4. Switch to the directory /usr/sap/<SID>/<j2ee-instance>/j2ee/os_libs.
5. Set the library path to this directory.
The name of the environment variable to use depends on your operating system (LD_LIBRARY_PATH for most UNIX systems,SHLIB_PATH for HP-UX, LIBPATH for AIX, PATH for Windows). You can find the name and value to use in the developer trace file /usr/sap/<SID>/<j2ee-instance>/work/dev_jcontrol; search for "lib path" for the node for <prefix-server>.
For HP-UX, also set the environment variable LD_PRELOAD to the base name of the Java VM shared library. In this case, the name to use depends on your CPU type; use either "LD_PRELOAD=libjvm.sl" for PA-RISC or "LD_PRELOAD=libjvm.so" for HPIA64.
6. To start the server, execute the command:
jlaunch -file=../cluster/instance.properties -nodeName=<prefix-server> pf=../../../SYS/profile/<sid>_<j2ee-instance>_<host>-traceFile= <trace_file> -startMode=console
Enter the command in a single line. Note that the parameter pf does not have minus sign as a prefix. This is correct.
7. Wait until the server has started. (The prompt '>' appears.)
regards
chandra
Maybe you are looking for
-
When trying to update my Mail Account Mailbox Behaviours settings, after making the changes when I try to close the settings pane the following messages occur: Invalid Incoming Mail Server The "Incoming Mail Server" field cannot be empty. The incomin
-
SQL LOADER message : Point de validation COMMIT atteint - nombre d'enreg
Hello I am loading a csv file into an oracle table via SQL LOADER Each time i invoke it i get the folowing message : SQL LOADER message : Point de validation <COMMIT> atteint - nombre d'enregis. logiques 52. (i am french version of apex) And the tabl
-
Displaying BLOB image by using ADF Faces
Hi all, I digged the forum but couldn't find any satisfied answer about displaying BLOB images by using ADF Faces. I have insterted POJO object to Oracle database but couldn't find any way to display blob (in java byte [] ) data in POJO. I have read
-
well, In Uzbekistan there is no BIS of BES, so thats why, we do not have any service books for our providers, could you help me, because I need service books(mms, internet) i will give the link Profile: Beeline MMS login: beeline passowrd: beeline AP
-
Hi, I followed the amazing SAPUI5 blog : How to create SAPUI5 application consuming Gateway service with the help of SAP NW Gateway Plug-in for Eclipse I was able to resolve all errors mentioned in this blog but then i get another error : Uncaught Ty