How to connect to windows desktop machine

HOW DO I CONNECT MY 27" LED CINEMA TO A WINDOWS DESKTOP CPU

It can be done. You need to purchase a $100 converter.
http://www.amazon.com/gp/product/B003LGOWNQ/ref=s9_simh_gw_p23_d1_i1?pf_rd_m=ATV PDKIKX0DER&pf_rd_s=center-2&pf_rd_r=0T16SWEYJPTEATR3Q0M2&pf_rd_t=101&pf_rd_p=470 938631&pf_rd_i=507846
Warning - you won't get the full resolution on the monitor but it will work.

Similar Messages

Can't connect to windows 7 machine using microsoft remote desktop connection

I am unable to connect from my home network to the Windows 7 Professional machine at my office, using either Microsoft Remote Desktop Connection (2.1.1) for Mac or the open source CoRD program.
When connected to the office network (which is running MS Small Business Server 2011 Standard) both CoRD and MS RDC will connect to my desktop machine just fine! (My MacBook Pro runs Mountain Lion.)
From my home network, MS RDC will complain that it cannot find the Windows computer if I just use the Windows computer name. If I use the Windows machine's iPV4 address, it works on it for a minute and then tosses up this error message:
Using the IP address of the Windows machine, CoRD just grinds away for a minute or so and then times out.
I should add that using Internet Exporer under Parallels from home, I can get a little closer to success (after fidding around with ActiveX controls for a bit). I will get to the Windows login screen, but then I am told that my user password is wrong (which makes no sense at all)!
Okay, geniuses, have at it, and thanks in advance!!

The genius for Microsoft products an be found onthe Microsoft forums for their Mac software:
http://answers.microsoft.com/en-us/mac

Can someone tell me how to join my windows 8 machine to my osx mountain lion servers active directory?

i have tried connecting my windows 8 machine to my mountain lion active directory every way possible and i get an error message saying something like this
"an active directory domain controller (AD DC) could not be contacted"
i only really want to do this to file share as when i and try to log in it maps the network drive but then doesnt let me access anything and i have tried to change permission multiple times server side.
Thanks!

okay thanks
but the permissions seem to be fine i have the HD set as a share point and i can access anything apart from user files i can go into /users/username/applcations but documents desktop etc does not work ? I have attached a screenshot on how my permission are set out i even tried to make the drive guest accesable but still didnt work

How to connect my copy/fax machine?

how to connect my copy/fax machine?

Did you follow the instructions that came with the unit? At what step exactly did you have a problem at?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to connect to windows network

Is there a way to connect your iPad and/or iPhone 5 to a Windows network? If so how?

Hi, Charlie -
I'm not insulted at all! I appreciate the dialog.
Here's what I can tell you. I checked the airport utility and it indicates specifically that the Airport Express is being used to "Extend a wireless network." It's not connected to the Airport Extreme by any cable.
Given the difference in indicated signal strength on my MacBook Air (I'm using it now and it's 3 feet away from the Mac Pro), I've got full strength on the Air but when I try to connect the Windows machine it indicates only 1 bar/unit of strength. I'm guessing that it's not seeing the Express (extended) but only the Extreme that's much farther away. I'm in the basement at one end of the house and the Extreme is on the second floor at the other end of the house. When I boot the Mac Pro to OS X I'm able to join the extended network. Hmmmmm...
Rob

What is the best rdp client for mac so I can connect to Windows desktop at work

what is the best mac compatible rdp client I could use to connect to my Windows desktop at work?

Reflexvest wrote:
I've been using it for 3 months without a problem.
Maybe it's because I have office installed but I tought it was free to use?
I underwent the same exact scenario. Installed MS Office (Home and Student), and also installed the RDC client. Worked for several months, and then gave me the "license expired" problem. Since it went a few months longer than the previous installation, which was not part of Office, I erroneously thought that the licensing problem was gone. Not so. Six months after install, it is dead. I think the Office version just gives you six months or so of usage, instead of three.
It's awfully "nice" of Microsoft to pull this, without giving the user any means for resolution. It says you have to buy a license, but from who?, where? How much?

Can't connect to Windows 7 Machine

Hello All,
I'm getting increasingly frustrated with this issue! I have a Mac Pro running 10.8.4 that I'm trying to connect to a Windows 7 machine. I need to transfer lots of files from this Mac to the Windows 7 machine as it will be replacing it eventually. I've found the ip address of the windows machine (192.168.0.71) and, using Command-K to connect to the "server" I type "smb://192.168.0.71" ... Everything should be groovy but I keep getting the error:
"There was a problem connecting to the server. The Share does not exist on the server. Please check the share name and try again."
What in the world does this mean? The Windows machine is set up to be visible, shared, drives can be accessed, and in those drives, the permissions are such that EVERYONE can access. I'm totally lost and very frustrated.
Am I doing something stupid? Does anyone have any suggestions?! Thanks in advance!!!

The genius for Microsoft products an be found onthe Microsoft forums for their Mac software:
http://answers.microsoft.com/en-us/mac

How to connect the two virtual machine .

I installed VM workstation and created two virtual machine .Please suggest me how to connect them internally each other though vm network editor.I want create RAC Setup for practice.

NAT is the default adapter type in VirtualBox, which will work in almost any configuration and networking environment. Using the NAT adapter, the host system will establish connections on behalf of the guest OS. NAT requires that the corresponding VM guest adapter uses DHCP and cannot be used to provide any services unless you configure port forwarding (>1024) at the VirtualBox VM NAT adapter.
Bridged networking is the most transparent adapter type, but requires a physical network adapter on the host OS, which is limited depending on the host system and hardware, e.g. wireless. It also requires that the user understands network and routing restrictions of the host system in case of using the interface to communicate between the host and VM. A combination of host-only and NAT may sometimes be necessary to allow the VM to connect to the internet and allow the host to communicate with the VM guest OS.
Btw, the host-only adapter IP actually works on behalf of the host OS and can be used to allow the VM to access the host system. So if Internet is not required, the NAT or bridged adapter are not required. I'm not sure if many people realize that, since it's not really mentioned in the documentation. So if you use the host-only adapter, simply use the host-only IP instead of the host system real IP to connect the VM to the host OS.
I also switched to VirtualBox a couple of years ago, mainly because it provides more VM hardware options, is free and because of the ability to manage multiple virtual machines and group them together. I have about 70 virtual machines for testing and evaluating configured on my home computer. I also like the option in VirtualBox to clone a VM based on a Snapshot.
VMware provides a Virtual Network Editor in VMware Workstation (KB 1018697), which allows to customize any of the existing virtual network adapter or add new ones. The available technologies under any Type 2 hypervisor are very similar between different products:
http://www.vmware.com/support/ws45/doc/network_configure_ws.html

Problems connecting to Windows XP machines on same network after 10.6.3

Hello,
It has been a painful experience updating to 10.6.3. One of the issues I am having is after been logged on via WiFi for about 10 minutes I am not able to connect to any of my Windows XP machines on the same network. The only workaround (and a real pain in the rear) is to reboot the MBP.
I am considering restoring via Time Machine to the previous build if that is going to solve the issues with Windows. Anybody else encountering similar problems after updating to 10.6.3?
Thanks!
Marcelo

Please search the discussions before posting. Questions regarding using ARD with Windows computers have been asked and answered dozens of times. You could save yourself time in the future.
ARD is for the remote management of Macs only. If you want to control Windows computers with ARD then you'll need to install VNC server software on the Windows machines.

How to connect to Windows 2008 VPN server with certificate support

Unfortunatelly if I select any Windows 2008 server compatible protocol (PPTP, L2TP) I cannot select PKI certificate, its only available for Cisco VPN. Yet my company has 1000 laptops and utilizing Windows 2008 Server for VPN (Cisco is too expensive and unnecessary because VPN is part of Windows Server). PKI certificate is required for connection security.
Any plans to enable certificates for PPTP or L2TP in 2.1 firmware? Even better would be to add SSTP protocol with certificate support, because it takes only one standard TCP connection (https) per user (uses least possible NAT resources for heavy loaded NATed WiFi spots). Also in some public places https is the only option to connect as PPTP and L2TP are filtered.

Hi Shahzad,
>>how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?
Based on your issue, if you wan to connect the sql server 2008 r2 sp2 from VS2013 IDE. I suggest you can try the Ammar and darnold924's suggestion to check your issue.
In addition, I suggest you can also refer the following steps to connect the sql server 2008 r2 sp2 with visual studio 2013 ultimate.
Step1: I suggest you can go to VIEW->SQL Server Object Explorer->Right click SQL Server->Add SQL Server.
Step2: After you connect the SQL Server 2008 r2 sp2 fine, I suggest you can go to VIEW->Server Explorer-> right click the Data Connection->Add Connection.
And then you can create the connect string in the Add Connection dialog box.
Hope it help you!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to connect to Window 2003 server using "connect as"

How can I set up Lion to easily connect to specified shares in the windows 2003 server. I want to authenticate as a user other than the one I am logged into on my Macbook? I am setting this up for teachers in a school. The macbook may be used by multiple teachers. Best way (simplest) please.

Hi
Let's pretend the Windows Server has an IP address of 10.10.10.254
Go Menu > Connect to Server > smb://10.10.10.254. When prompted enter the account credentials of a user (username and password) that exists on the Windows Server. Alternatively you could use cifs://10.10.10.254. Either one will do. Assuming no 'silliness' on the Windows Network Administrator's part the share should mount.
For ease of connectivity afterwards you could tick the 'remember password using keychain manager' box. Personally I find keychain manager more trouble than it's worth. However you deal with this as you see fit. If it's multiple users using the same workstation I would not enable the option.
Once mounted you can view the Server Share on the user's Desktop by enabling the option in the Finder. It should appear as a blue-ish drive icon on the Desktop. Add the icon in that User's Login Items in the Accounts Preferences Pane. Think of it a little like the Windows equivalent of "mapping a network drive".
Next time that user logs into their local account and provided the workstation is connected to the same network, the share point should mount.
You could also or alternatively drag the share icon to the right hand side of Dock. Click on it to re-connect to the share after you've disconnected from it.
HTH?
Tony

How to connect a Windows computer to Base Station through Ethernet

I use Road Runner to connect to the internet. My setup is like this.
Roadrunner comes in to the cable modem. My cable runs from the modem to Airport Base Station. My MacBook Pro sees the base station fine and I'm accessing the internet wireless through Airport. All is well there.
My wife has a PC running Windows XP. I put my Airport Extreme disk in the PC and it loaded the software.
I have an ethernet cable plugged into the back of the PC running over to the Base Station to one of the ethernet ports. There is a green light beside the cable on the base station and also on the pc where the cable plugs into it - it blinks off and on on the PC.
Yet, when I get on the PC, I cannot access the internet. As you can probably already guess, I'm not too saavy on the PC. I have restarted the PC and tried all I know to do, but I still can't connect to the internet. I'm sure I'm missing a setting.
Can someone please "hold my hand" and walk me through how to set up the PC? I can't get very far on the PC going into Airport Utility because it says I don't have an internet connection.
Please help! (And talk to me like you're talking to a rock . . )
Thanks
Reggie

Check out the following iFelix article to see if it will help getting the Ethernet-connected PC to access the Internet: Connecting a XP PC to a Airport Network via the LAN port of the Airport Extreme Base Station

How i connect to my localhost machine to other database machine for sending

hi,
in our organization lan is there. how should i pass the jdbc connection
commands through java program to get the data from database from my system to other database system. here in my system there is no database. please provide the code for that.
import java.sql.*;
public class JDBCTest {
     private static final String DRIVER_NAME="com.ibm.db2.jcc.DB2Driver";
     private static final String DB_URL="jdbc:db2://Krishna:50000/KCC";
     private static final String USERNAME="db2admin";
     private static final String PASSWORD="admin123";
     private static final String QUERY="select * from KCC.KCC_REGISTRATION";
     public static void main(String[] args) throws Exception {
          Class.forName(DRIVER_NAME);
Connection conn = DriverManager.getConnection(DB_URL, USERNAME, PASSWORD);
Statement stmt = conn.createStatement();
ResultSet rslt = stmt.executeQuery(QUERY);
          while(rslt.next()){
               System.out.println(rslt.getString(4));
               System.out.println(rslt.getString(5));
rslt.close();
stmt.close();
conn.close();
System.out.println("Success! Connected to database.");
} this is i have written code. here krishna is my system. we r using db2 data base . it is there in other machine. how should i pass the database connections from local system to database system ( i am accessing the data by dy directly using db URL (jdbc:db2://kcc-db:50000/KCC)). but i don't want to like that. first i want to connect to my localhost then i want to connect to db machine.
please provide the code.

I can't help here, but perhaps this FAQ will - http://pondini.org/TM/AEQ2.html.
Clinton

RV042G VPN - How to connect with Windows 7 IPsec client?

Hello,
I'm trying to use the Windows 7 VPN client, to connect to my RV042G. Here are some Screenshots of my router's and Windows' configuration:
I tried different other configurations, too, but each time, I get a lot of errors on the router. The upper configuration results in the following:
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: received Vendor ID payload [RFC 3947]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: received Vendor ID payload [RFC 3947]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: ignoring Vendor ID payload [FRAGMENTATION]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: ignoring Vendor ID payload [FRAGMENTATION]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: ignoring Vendor ID payload [fb1de3cdf341b7ea16b7e5be0855f120]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: ignoring Vendor ID payload [fb1de3cdf341b7ea16b7e5be0855f120]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: ignoring Vendor ID payload [Vid-Initial-Contact]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: ignoring Vendor ID payload [Vid-Initial-Contact]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: ignoring Vendor ID payload [e3a5966a76379fe707228231e5ce8652]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: ignoring Vendor ID payload [e3a5966a76379fe707228231e5ce8652]
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: [Tunnel Negotiation Info] <<< Responder Received Main Mode 1st packet
Feb 13 14:58:05 2014     VPN Log     packet from 192.168.1.24:500: [Tunnel Negotiation Info] <<< Responder Received Main Mode 1st packet
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: responding to Main Mode from unknown peer 192.168.1.24
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: OAKLEY_AES_CBC is not enabled for this connection. Attribute OAKLEY_ENCRYPTION_ALGORITHM
Feb 13 14:58:05 2014    Kernel     last message repeated 5 times
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: OAKLEY_GROUP_MODP2048 is not enabled for this connection. Attribute OAKLEY_GROUP_DESCRIPTION
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: OAKLEY_GROUP_MODP2048 is not enabled for this connection. Attribute OAKLEY_GROUP_DESCRIPTION
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] >>> Responder Send Main Mode 2nd packet
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] >>> Responder Send Main Mode 2nd packet
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] <<< Responder Received Main Mode 3rd packet
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] <<< Responder Received Main Mode 3rd packet
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] >>> Responder send Main Mode 4th packet
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] >>> Responder send Main Mode 4th packet
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] <<< Responder Received Main Mode 5th packet
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] <<< Responder Received Main Mode 5th packet
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: Peer ID is ID_IPV4_ADDR: '192.168.1.24'
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] >>> Responder Send Main Mode 6th packet
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] >>> Responder Send Main Mode 6th packet
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] Main Mode Phase 1 SA Established
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] Main Mode Phase 1 SA Established
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: sent MR3, ISAKMP SA established
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] <<< Responder Received Quick Mode 1st packet
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: [Tunnel Negotiation Info] <<< Responder Received Quick Mode 1st packet
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: cannot respond to IPsec SA request because no connection is known for 78.52.27.132:17/1701...192.168.1.24[[email protected]]:17/1701
Feb 13 14:58:05 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: sending encrypted notification INVALID_ID_INFORMATION to 192.168.1.24:500
Feb 13 14:58:07 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: Quick Mode I1 message is unacceptable because it uses a previously used Message ID 0x00000001 (perhaps this is a duplicated packet)
Feb 13 14:58:07 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: Quick Mode I1 message is unacceptable because it uses a previously used Message ID 0x00000001 (perhaps this is a duplicated packet)
Feb 13 14:58:07 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: sending encrypted notification INVALID_MESSAGE_ID to 192.168.1.24:500
Feb 13 14:58:10 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: Quick Mode I1 message is unacceptable because it uses a previously used Message ID 0x00000001 (perhaps this is a duplicated packet)
Feb 13 14:58:10 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: Quick Mode I1 message is unacceptable because it uses a previously used Message ID 0x00000001 (perhaps this is a duplicated packet)
Feb 13 14:58:10 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: sending encrypted notification INVALID_MESSAGE_ID to 192.168.1.24:500
Feb 13 14:58:14 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: Quick Mode I1 message is unacceptable because it uses a previously used Message ID 0x00000001 (perhaps this is a duplicated packet)
Feb 13 14:58:14 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: Quick Mode I1 message is unacceptable because it uses a previously used Message ID 0x00000001 (perhaps this is a duplicated packet)
Feb 13 14:58:14 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: sending encrypted notification INVALID_MESSAGE_ID to 192.168.1.24:500
Feb 13 14:58:22 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: Quick Mode I1 message is unacceptable because it uses a previously used Message ID 0x00000001 (perhaps this is a duplicated packet)
Feb 13 14:58:22 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: Quick Mode I1 message is unacceptable because it uses a previously used Message ID 0x00000001 (perhaps this is a duplicated packet)
Feb 13 14:58:22 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: sending encrypted notification INVALID_MESSAGE_ID to 192.168.1.24:500
Feb 13 14:58:38 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: Quick Mode I1 message is unacceptable because it uses a previously used Message ID 0x00000001 (perhaps this is a duplicated packet)
Feb 13 14:58:38 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: Quick Mode I1 message is unacceptable because it uses a previously used Message ID 0x00000001 (perhaps this is a duplicated packet)
Feb 13 14:58:38 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: sending encrypted notification INVALID_MESSAGE_ID to 192.168.1.24:500
Feb 13 14:58:52 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: received Delete SA payload: deleting ISAKMP State #89
Feb 13 14:58:52 2014     VPN Log     (c2gips0)[2] 192.168.1.24 #89: received Delete SA payload: deleting ISAKMP State #89
Feb 13 14:58:52 2014     VPN Log     (c2gips0)[2] 192.168.1.24: deleting connection (c2gips0) instance with peer 192.168.1.24 {isakmp=#0/ipsec=#0}
Does anyone know, how to configure the router and Windows 7, to get a working VPN tunnel?
Thanks.

Ok, I could find the time, to try this out. I followed this instruction: https://www.shrew.net/support/Howto_Linksys and it works.
There is at last one Problem: I can't access computers behind the remote router from the connected client. The client can see the remote router and computers behind the remote router can see the connected client using the IP-adress, I used for shrewsoft.
I tried to ping some remote PCs from the client, but I get timeout messages. Ping is enabled on all devices. There are no log errors on the router. I tried to add the remote router on the client as a standard gateway, and I decativated the router's firewall, but without success.
Does anyone know, why the communication just works in one direction?

Drivers for Curve 8330 install everytime its connected to Windows xp Machine

I am having an issues lately with every time my Curve 8330 is connected to the computer it installs the device drivers. anyone know why this is happening?? How can I stop it?

Hello cellrev and welcome to the BlackBerry® Support Community Forums.
Do you have the BlackBerry® Desktop Software installed on your computer?
If you connect another USB device to your computer, does the same repetitive driver installation?
Do you have an anti-virus program installed? If so, what program?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to connect to windows desktop machine

Similar Messages

Maybe you are looking for