How to connect to work computer using my iPad?

How can I connect my iPad to my work computer?

Dock cable. http://store.apple.com/us/product/MA591G/B?fnode=MTY1NDAzOQ&mco=MTA4NDc4NTY

Similar Messages

How to connect to remote computer using ARD and AE

Does anyone have detailed instructions on how I can us my AirPort Extreme and setup all the ports to allow the use of ARD remotely?

You can configure your AirPort Extreme for ARD using the AirPort Utility. ARD is one of the choices under Port Mapping.
You get to the port mapping option, as follows:
Run the AirPort Utility.
Select the AirPort Extreme, and then, select Edit.
Select the Network tab to enable it.
Click on the "+" button under the Port Settings field.
Click on the drop-down arrow to the right of the Description field. (see image below)
Select Apple Remote Desktop. This will automatically populate the other fields on the page.
Select Save, and then, select Update.
Allow the base station to reset.

It says...connect to your computer, use itunes to restore..but it wont work

1st off: i own an ipod video. Ok, so when I turn on my ipod, this white screen comes up and it says connect to your computer, use itunes to restore. And then when I restore my ipod on itunes...it just keeps making me restore it over and over again. I dont no wat to do and I'm getting really frustrated. i need someone to tell me wat to do cause I just do the same thing over and over again, and it doesnt work. Please help me!!!

Have you had a chance to look at this troubleshooting page? Have a look at the bottom section that covers what to try if restoring doesn't work, it may be of some help: iTunes has detected an iPod in recovery mode - Use iTunes to restore

My ipod says "connect to your computer. use itunes to restore."

My ipod says "connect to your computer. use itunes to restore."
So I plug it into the computer and itunes says it needs to restore, so I click restore, everything seems to go fine, and it says the ipod needs to restart, it does, has a lil progress bar go across the ipod screen, then itunes detects the ipod again and says it needs to be restored again. This is an endless loop, anyone have any idea how to solve this problem?

Have you had a chance to look at this troubleshooting page? Have a look at the bottom section that covers what to try if restoring doesn't work, it may be of some help: iTunes has detected an iPod in recovery mode - Use iTunes to restore

My 5th gen Ipod won't do anything but show the " Connect to your computer, use itunes to restore" screen. However my computer nor anyone else's will recognize my ipod. What can I do?

My ipod will not do anything but show a screen that asks to "connect ipod to computer, use itunes to restore" My computer however will not recognize my ipod at all so there is no way to restore my ipod. I am not skilled in computers but if anyone has a step by step that would be great.

Did you try a hard reset with the iPod still connected to your PC? Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

HT204409 I am unable to connect to my Wi-Fi at home, but am able to connect at work. Using my new iPad 4G with cellular and a Motorola SBG6580. My iPad 3G Wi-Fi only connects just fine; the 4G just "spins the gear."

I am unable to connect to my Wi-Fi at home, but am able to connect at work. Using my new iPad 4G with cellular and a Motorola SBG6580. My iPad 3G Wi-Fi only connects just fine; the 4G just "spins the gear."

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How to connect to Digital Camera using JMF?

How to connect to Digital Camera using JMF?
Any example?
thx

If the DC has a mode that works like a web cam, and can generate either a VFW or DirecShow stream, then you could capture a frame of the stream, yes.

"Connect to your computer, use iTunes to restore" loop! Please help!!

Everytime I try to turn on my iPod, it gives me the "Connect to your computer, use iTunes to restore" message so I use iTunes to restore but once it's "done" restoring, it tells me the iPod is still in Recovery Mode and needs to be restored. Someone told me to change the file to a Fat32 file but it's already a Fat32. Someone else suggested to change the drive letter but , unless I'm not doing it right, that's not working either. Any other suggestions?? Thanks!

Yes, it does need to recognize the iPod in order for you to do something like this.
Have you first tried working through these troubleshooting steps to get your iPod recognized in iTunes?
The Five R's
-Kylene

How to connect to AD without using ADWS?

How to connect to AD without using ADWS? Is it possible to do it? If yes, can teach me how to connect to AD and find their attributed?

Hi Noobycy,
There are few tools to find AD attributes without ADWS. See options you have below
1.ADFIND -
http://www.joeware.net/freetools/tools/adfind/ This is a command Line tool
2.
The ADSIEDIT tool
from the Windows Support Tools is a great tool to "explore" the AD.
http://technet.microsoft.com/en-us/library/cc731547.aspx
3. ADUC -
http://www.boostsolutions.com/blog/how-to-find-attributes-of-objects-in-active-directory/
Regards, MassonTech

HT1296 I want to synch my address book using the usb connection to my computer, but the IPad doesn't appear on the desk top?

I want to synch my address book to my I-Pad using the usb connection to my computer, but the IPad doesn't show up on the desk top or in I-Tunes. Any suggestions?

Try again to install the latest version of iTunes; http://www.apple.com/itunes/download/
Otherwise when your iPad is connected with your computer and iTunes open try several times; Keep the Powerbutton and the Homebutton pressed at the same time until you see the Apple logo on your iPad screen.

How to connect Sql Server 2000 using JDBC ODBC Driver

How to connect Sql Server 2000 using JDBC ODBC Driver ?
plz Send Syntax.
thanks

In SQL Server 2000 the driver class is com.microsoft.jdbc.sqlserver.SQLServerDriver
The connection URL for the default SQL Server 2000 database is jdbc:sqlserver://localhost:1433
Class.forName(
"com.microsoft.sqlserver.jdbc.
SQLServerDriver");
String url =
"jdbc:sqlserver://localhost:1433";
Connection conn = DriverManager.
getConnection(
url, "sa", "sqlserver");

How ADBC connection is benefits by using SAP HANA as secondary database ?

Hi,
I have one more important question.
How ADBC connection is benefits by using SAP HANA as secondary database in terms of performance wise for the access of data from HANA database as a secondary database.
I have 2 options and which is better for the good performance for accessing the data-
1 . In ABAP Reports in the SELECT statements by using CONNECTION (“HDB”) will this improve the
     performance.
      e.g : select * from BSEG into TABLE IT_TAB CONNECTION (“HDB”).
2. Will Create the Stored procedure in HANA studio and Call
   from ABAP as below by using NATIVE SQL–
     EXEC SQL
      SET CONNECTION (‘HDB’).
     ENDEXEC.
    EXEC SQL.
      EXECUTE PROCEDURE proc (IN    p_in1
                             OUT   p_out1   OUT   p_out2 )
   ENDEXEC.
Regards,
Pravin
Message was edited by: Jens Weiler
Branched from http://scn.sap.com/thread/3498161

Hi Pravin,
Option 1: In this case ADBC might even worsen the performance due to the overhead in the ADBC framework. OpenSQL is the method to go here, as OpenSQL - from the ABAP point of view - features the optimal communication with the database while ADBC has overhead like constructor-calls for the statement, parameter binding, etc.
Option 2: In this case ADBC is comparable with EXEC SQL but features more options, e.g. clean concept of multiple connection (connection objects via CL_SQL_CONNECTION), exception handling, etc. So I strongly propose to favour ADBC over EXEC SQL, but not simply for performance reasons. You might have a look at the ABAP Language Help in your system on more information on ADBC and the advantages over Exec SQL.
Cheers,
Jasmin

How to connect to oracle10g Database using oracle11g Enterprise Manager.

Hi,
please suggest me how to connect to oracle10g Database using oracle11g Enterprise Manager.
i did setting in tnsnames.ora file of oracle11g database but when i am trying to connect sys@testvsr and password
using oracle11g Enterprise manager its not connecting but from command prompt its connecting.
its not acccepting hostname its simply telling invalid username and password ,if i remove and try to connect its connecting.
so please suggest its very urgent my manager is nagging.
Regards,
Srinu.

you cant attach a database 10g instance with
Enterprise manager of 11g as enterprise manager is
meant for a single database only .. your problem cant be solved
enterprise manager it can be solved by using GRID CONTROL
For more details visit oracle documentation..
Hope This helps..
BI TC

Ipod 4 wiped out? I plugged it in to my work computer (used strictly for charging - home computer is where my files are updated) - but today it erased my ipod! Everything is gone

I plugged it in to my work computer (used strictly for charging - home computer is where my files are updated) - but today it erased my ipod! Everything is gone! It is asking me set-up questions (Language, country) and asking me to plug it in & go to ITUNES - problem is, my itunes icon is not working? It usually loads as soon as I plug the Ipod in but not today? I can take it home & plug it in & hopefully my files will come back but why is it doing this? (I've had it more than a year & it's never done this?)

It sounds like a setting change on the computer and iTunes synced the iPod. Yo can only sync with one iTunes library, if yo switch the iPod gets erased and its contents replaced with what is in the iTunes library of the computer.
Go to iTunes>Preferences>Devices and make sure that the box that says "Prevent iPods.. syncing automatically" is checked.

I can not get my Ipod to connect with my computer using a usb cord

I can not get my Ipod to connect with my computer using my usb cord ?

Hi starhalcomb,
I'm sorry to hear you are having issues with your iPod touch. I also apologize, I'm a bit unclear on your exact configuration. If you are having issues with your iPod touch not being recognized in iTunes when you connect via USB, you may find the information and troubleshooting steps outlined in one of the following articles helpful:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If you don't see your connected device in iTunes for Mac - Apple Support
Regards,
- Brenden

How to connect to work computer using my iPad?

Similar Messages

Maybe you are looking for