How to connect to WRT110 at N speeds?

I got my WRT110 router set up last night and all seems to be working well. I have my wirless set to Mixed so I can allow all of my devices to connect to it. The problems is I have a laptop with a wireless N NIC and it doesn't appear to be connecting at N speeds. It is higher then 54mbps currently connecting at 64mbps, but it should be connecting at over 100mbps at least. I understand that with good settings N can go all the way up to 300mbps.
What do I need to change in my router to get my laptop to connect that a higher speed?
Thanks!

Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...See the Speed...
If you don't get the desired speed try to change the Wireless Channel to 1,9 and see if tha works...

Similar Messages

How to connect to the net - high speed

Hi there, Im writing for a friend of mine who has a iMac... he has his highspeed cable plugged into his iMac, however the net does not work.... on my macbook once I plug in my cable the internet works right away for me.... so Im wondering what he has to do / get for his net to work.... He has a PC that connects to the net via a modem.... however his iMac is downstairs in the basement....
ne suggestions? Thanks a bunch!

Usually the modem needs to be reset. It stores information about your computer that sometimes needs to be reset.
Have him power down the computer, then unplug the power to the modem.
Wait for a minute, then plug the modem back in and wait for it to initialize itself. Then power up the computer.
If that doesn't work, have him call his internet provider.
They can determine if there is anything wrong with the line or the modem.
Message was edited by: Scott T.

How to connect an external monitor to macbook pro. The monitor has no usb connector without a usb

How to connect an external monitor to macbook pro. The monitor has no usb connecter, only a port.

Most MacBook Pro models have a Mini DVI port, a Mini DisplayPort or a ThunderBolt port for connecting an external display. USB does not have enough bandwidth to support a responsive display connection.
What model MacBook Pro do you have, by year, CPU speed or MacBook Pro 3.1 designation?

How to connect a mac wirelessly to a pc?

My husband's pc is currently hooked up to the internet using a cable modem. I'd like to wirelessly connect my G4 imac but can't seem to figure out how to do that. Does his computer need a router and mine needs an airport card? Thanks for any suggestions.

gdbabe, Welcome to the discussion area!
The simplest way is to get an inexpensive wireless router. Connect the cable modem directly to the WAN/Internet port on the wireless router. Connect the PC to one of the LAN ports on the wireless router.
If you want your iMac G4 to connect wirelessly, then yes it would need some type of wireless connectivity.
If the clock speed of your iMac G4 is 700 or 800 MHz, it requires the original 802.11b AirPort card. It is NOT compatible with the newer AirPort Extreme card.
If the clock speed of your iMac G4 is 1 GHz or above, it requires the AirPort Extreme card. It is NOT compatible with the original AirPort card.

Should connecting to a router affect speed of Internet connection?

I have a Netgear router and I have connected it to two MacBook Airs that I have.
I have cable internet, a line that comes out from the wall, and which I stick into the computer using the USB ethernet dongle.
But now that I am using a router, I connect the cable line into the router and use the ports to connect to the computers.
My question is:
What is the correct IP address that should be showing?
Network System Preferences show:
Status: Connected
USB ethernet is currently active and has the IP address 192:168.x.xx
The usual IP address (when I am not using a router) is usually 185.xxx.x.xx.
Is this OK, that it's showing the routher IP address?
The reason why I am asking is that the internet speeds seem to be slower when I am on the router.
It might just be my imagination and also because I am checking the speed a lot more than usual.
Should connecting a router affect the speed of the internet?
The router's maximum speed is 300 mbps and the cable internet's speed is 100 mbps.
I have noticed that the speed of the internet with the router is very variable: about 12 - 80 mbps.
Should I not worry?
I know that the internet speed with cable internet can fluctuate a lot more than with DSL.
Thanks for any replies.

I am connected to the router by LAN cables. I am not using wireless. I am using cable modem.
The cable from the wall goes to the router into the WAN port. Ethernet cables go from the router's LAN ports and to the two computers.
When I wasn't using the router, the speed of the cable internet could go as high as 100, occasionally as high as 200 (100 was the advertised speed of the cable internet).
Now, with the router, it's around 30. But I have gone as high as 80 while I have been testing with the router connected.
I think I am worrying for nothing, but I just want to know generally --- does a router affect the speed (assuming it's a router that can handle maximum speeds of the cable modem and that it's connected correctly, etc)?
I read that cable speed can depend on how many people are using it at the same time in that area and that sort of thing. I know the cable speed does vary a lot. But usually it's good during the daytime, about 90 mbps.

How to connect to a officejet 6600 wirelessly

I am trying to connect and print to the printer wirelessly but not sure how to set it all up.
Here is my hardware setup
Office jet 6600 printer
Lenovo laptop.
There is no internet connection available.
The printer is not connected to any network currently.
Once I turn the printer on my laptop can see the HPH711g.750CC9 network that is being broadcast by the printer.
I can connect to that network wich doesnt require any authentication.
When I run the add printer wizard, it finds nothing.

Well I'm not too sure. I pulled up the manual for your printer and there is no mention of Wireless Direct or Ad Hoc printing. I did find this in the specification section.
Connectivity
• USB 2.0 high speed
• Wireless 802.11b/g/n
1 This product supports the 802.11n 2.4 GHz frequency band.
So I am not sure what your computer is connecting too. But according to the manual you will need a router.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to connect iPhone 5s with Mercedies GL command online

How to connect iPhone 5s with new Mercedies GL s command online to access internet in Indian my service provider is Airtel

Ensure Bluetooth connection has been established for voice. On the iPhone ensure you've got personal hotspot enabled. On the GL Command system, go to online, and select your phone connection from the bottom left.
Works with my GL 2013 model, my iPhone 5S and also the 5 from my wife. Works great in glorious 4G speeds on my Vodafone connection.

How do connect to Historical Databases?

Hi,
please explain me what is Historical databases?
Can u tell me how to connect to Historical databases? can we download these Database servers from net?
- senthil

Hi Senthil,
You can try for RTXHDB (RTX Historical Database).
RTX provide secured relational databases for LAN and WAN network.
Often the use of relational database, or transaction-oriented technology, for off process historical LAN/WAN database applications, and doing unconventional operations on data.
As an example, It is in this area of off process historical data warehousing and retrieval that the RTXHDB (RTX Historical Database) system excels. RTXHDB processes and stores a massive flow of data for LAN/WAN database applications, which then can be retrieved with a great deal of speed and quickly turned into useful information for the PC user.
You can check following links for more information.
www.expertune.com/articles/isa2004perfmonhda.pdf
http://www.rtx.com/hdbcncpt.htm
Best Regards
Ramshanker

WRT110 drops download speed if I use ESET NOD32 Antivirus

My PC: Pentium4, Windows XP SP3 Home Edition.
D-Link dsl modem, Linksys router WRT110
DSL download speed 15 Megabits/sec.
WLAN turned off.
One PC connected to the router.
Without the router and with NOD32 Antivirus installed on my PC:
Download speed is 15 Megabits/sec.
With the router and with NOD32 installed on my PC:
Download speed drops down to 2 Megabits/sec.
If I uninstall NOD32, everything is OK,
the download speed is 15 Megabits/sec again
(with the router).
What should I do?
Message Edited by solo11 on 01-08-2010 03:24 PM
Solved!
Go to Solution.

I have been sent form here
http://www.wilderssecurity.com/showthread.php?t=262449
to this forum,
so I copy here what I have written there.
My PC: Pentium4, Windows XP SP3 Home Edition.
D-Link dsl modem, Linksys router WRT110
DSL download speed 15 Megabits/sec.
WLAN turned off.
One PC connected to the router.
Without the router and with NOD32 Antivirus installed on my PC:
Download speed is 15 Megabits/sec.
With the router and with NOD32 installed on my PC:
Download speed drops down to 2 Megabits/sec.
If I uninstall NOD32, everything is OK,
the download speed is 15 Megabits/sec again
(with or without the router).
What should I do?
I connected only one PC to the router with an ethernet cable
and turned off the wireless connection during the tests.
The tests were performed several times. But I got the same results.
***xxxxxxxxxxxxxxxxxxxxx*** means that I didn't use the thing
[NOD32 uninstalled]
(Internet) --- D-Link DSL-360R ADSL2+ modem --- ***xxxxxxxxxxxxxxxxxxxxx*** ---
--- ethernet cable --- Pentium4 PC --- Windows XP Home Edition SP3 ---
--- ***xxxxxxxxxxxxxxx*** --- Firefox (or IE8) --- DOWNLOAD SPEED - look at these pictures:
http://www.abload.de/img/no_nod32_installed__div0hc.jpg
http://www.abload.de/img/no_nod32_installed__di743o.jpg
(Internet) --- D-Link DSL-360R ADSL2+ modem --- ***Linksys WRT110 Router*** ---
--- ethernet cable --- Pentium4 PC --- Windows XP Home Edition SP3 ---
--- ***xxxxxxxxxxxxxxx*** --- Firefox (or IE8) --- DOWNLOAD SPEED - look at these pictures:
http://www.abload.de/img/no_nod32_installed__cow0db.jpg
http://www.abload.de/img/no_nod32_installed__coh2rj.jpg
[NOD32 INSTALLED]
(Internet) --- D-Link DSL-360R ADSL2+ modem --- ***xxxxxxxxxxxxxxxxxxxxx*** ---
--- ethernet cable --- Pentium4 PC --- Windows XP Home Edition SP3 ---
--- ***NOD32 Antivirus*** --- Firefox (or IE8) --- DOWNLOAD SPEED - look at these pictures:
http://www.abload.de/img/with_nod32_installed__e45h.jpg
http://www.abload.de/img/with_nod32_installed__w0gi.jpg - strange speedtest.net results, always
(Internet) --- D-Link DSL-360R ADSL2+ modem --- ***Linksys WRT110 Router*** ---
--- ethernet cable --- Pentium4 PC --- Windows XP Home Edition SP3 ---
--- ***NOD32 Antivirus*** --- Firefox (or IE8) --- DOWNLOAD SPEED - look at these pictures:
http://www.abload.de/img/with_nod32_installed__d1i4.jpg - drastic download speed slow down
http://www.abload.de/img/with_nod32_installed__g0ds.jpg - drastic download speed slow down
Upload speed is OK in all the four cases.
I've tested my uTorrent application.
It works well. Its download speed is 1.4 MB/s = 11.2 Megabits/sec
Something between my browsers (FF3.5.7 or IE8) and NOD32
or something with the router?
JDownloader application
If I watch it in full view
download speed drops to
600 KB/s = 4.8 Megabits/sec
If I put down JDownloader to the system tray
download speed jumps to
1.8 MB/s = 14.4 Megabits/sec
If I use my other PC with Core2Duo CPU and with Windows 7,
everything works well. Download speed is 15 Megabits/sec.
Message Edited by solo11 on 01-09-2010 10:12 AM

How to connect my friends apple notebook through video call

HOW TO CONNECT TO A FRIEND WHO IS USING APPLE NOTEBOOK FROM MY IMAC SUGGEST ME WAITING FOR A SOLUTION FROM APPLE TEAM SUPPORT

Hi,
Typing in all upper case is regarded and shouting here.
Presumably as you have posted in the OS X 10.7.x (Lion) area you are running this version of the OS on your iMac.
This will have iChat 6 on it.
This can use AIM, Jabber and Yahoo IDs within the app.
Apple IDS ending in @mac.com and iCloud issued @me.com and @icloud.com are also Valid AIM Screen Names.
If you use Googlemail and Enable "talk" in the products there you can then use your Google Mail ID as a Jabber ID (although it has it's own Add Account option in iChat)
Facebook has an option to Enable "Chat" which will give you a Chat ID variant on your name there and this can be used in iChat (or Messages) as a Jabber ID.
The Yahoo Account will only do Text chats.
It also has to be an actual ID registered at Yahoo.
Chats are then AIM to AIM or Jabber to Jabber or Yahoo to Yahoo.
So your Buddy will also need a suitable ID or Screen Name for the relevant service.
8:16 pm Sunday; January 19, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

I need to know how to connect my macbook to the tv

I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.

Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
Luck
E

How to connect a Sony Bravia TV to the internet through your Airport network

Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

I have now had a detailed reply from Sony Europe and the way to do this is to:
1.       Press Home on the TV Setup
2.       Use the right and left arrow to select Setting.
3.       Use the up and down to select Network, press Enter.
4.       Select Network Setup.
5.       Select Wireless setup.
6.       Select Scan
7.       Select your network
8.       A new screen will appear asking for entering the security key.
9.       Enter your WPA2 key.
10.   Select Enter.
11.   It will take you back to the same screen asking for entering the
security key.
12.   Press the right arrow.
13.   Select Auto.
14.   Press the right arrow.
15.   Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

How to connect my Mac book Pro to a TV

How to connect my MacBook Pro to the TV using HDTV cable

I am assuming your TV has HDMI connector.
In that case, if your MacBook is the retina-one, you have HDMI connector there too. All you need is HDMI cable to connect teh two.
If your MacBook has thunderbolt port instead, you need Mini DisplayPort to HDMI adapter and HDMI cable.
Hope this makes sense.

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

How to connect to WRT110 at N speeds?

Similar Messages

Maybe you are looking for