How to connect to XCM of CRM?

We have CRM installed on one host (f.e. PC1) and J2EE-engine on another host (PC2).
How can I connect to XCM?
I try to check my system acordantly to this topic:
Troubleshooting IC WebClient's Interactive Scripting Runtime
Thanx, Alexander.

Hello Gregor,
Ok. I thought that XCM is available through 8000 port (HTTP-listener of CRM WAS).
But then I found it by myself:
http://server:50000/ICSERVER/admin/xcm/init.do

Similar Messages

  • How to we give alternate JCO connection in XCM.

    Hi Gurus,
    We are using CRM 7.0 Web Channel B2B and B2C applications with Lean Order Framework.
    In B2B XCM we have used  "ERP standard configuration for CRM catalog and marketing support "as base configuration
    and to connect to CRM and ECC we have two JCO connections.
    Similarly which base configuration in B2C will provide  two JCO connections
    OR
    how do we give alternate JCO connection in XCM.
    Any idea please help.......

    Have a look at this
    /people/deborah.corsi/blog/2009/02/17/sap-crm-70-web-channel--understanding-the-lord-basket
    Regards
    Mark

  • How to connect CRM 7 to Java Backend? Test?

    Hi All:
    How do I connect the CRM ABAP stack to an installed standalone (as per install guide) stack? I have followed the install manual but I still do not see how the connection is made!
    How do I test this connection to know whether it is working or not? (ABAP CRM calling something in Java CRM component)
    Also how do I attach my installed TREX?
    Thanks
    Tony.
    PS: I have already followed the respective install guides as well as post install section of the guides.

    Hello ,
    Please check the guide from the link http://service.sap.com/instguides
    Installation Guide
    SAP CRM 7.0 Java on Windows: Oracle
    Based on SAP NetWeaver 7.0 including Enhancement Package 1
    PUBLIC Document version: 1.1 ‒ 02/05/2009
    Section:  Page 98
    5.20 Checking the Availability of Back-End Systems for CRM Java Components
    After the installation, you have to check the availability of back-end systems as follows:
    1. To test the connection to the ABAP back-end system, you create a back-end user [page 99].
    2. Depending on various business processes, you check the following back-end systems:
    ABAP system [page 100]
    TREX Server [page 102]
    http access to eBay (selling via eBay processes only) [page 102].

  • How to set up Knowledge article CRM on HANA

    Dear All,
    We are using HANA database as a primary database. I'm in process of configuring Knowledge management using the best practice C3G/C29.
    I did not get answers to below questions even after reading documentation on knowledge management and OSS notes(1254901,1517236,1703338,1730098,1770286,1773525,1777201,1789329,1789386,1792053,1816407,1817417).
    1. Is it necessary to Install TREX even though the database is HANA ?
    2. How to connect SAF(software agent framework) to HANA  , SAF uses TCP/IP RFC connections to TREX ?
    I have selected HANA database as search engine in below path.
    SAP NetWeaver system and launch the Implementation Guide (IMG) by using transaction SPRO. Navigate to the node  Search and Operational Analytics  Common Settings for Operational Analytics and Embedded Search  Configure Indexing  Define TREX/BWA Destination or SAP HANA Database Connection .
    As I'm using HANA database I can't use RFC destination of TREX TCP/IP connections and TREX was not installed.
    Please guide me how to set up knowledge article in CRM on HANA db.
    similar issue thread is unanswered since a year.
    How to Knowledge base set up in SAP CRM 7 EHP 3 using HANA
    Thanks,
    Naveen.

    Hi there,
    Please update anyone has idea on above issue.

  • How to connect tibco ems with sap xi engine?

    hi friends,
    how to connect tibco ems with sap xi engine?
    plz explain me in brief. if possible plz give some link.
    thanks & regards
    Ruban

    Hi Ruban
    refr this links
    Re: XI 3.0 - Tibco integration
    <b>IBCO -> XI SCENARIO -> Web Service</b>
    http://dev.systinet.com/doc/ssc-60/primer/html/using.web.services.html
    http://www.estrategy.gov/presentations/umd_e-gov_ent_arch/sld015.htm
    General disadvantages of using web service
    http://www.samspublishing.com/articles/article.asp?p=31555&rl=1
    http://www.omg.org/news/whitepapers/CORBA_vs_SOAP1.pdf
    Replace TIBCO with XI
    Tibco & XI
    XI integration with Tibco
    <b>
    Aslo see the below links</b>
    XI Vs Tibco Vs Webmethods
    Re: Why XI ??
    Differences between Tibco BW and how to do canonical mapping in XI
    http://www.sap.com/solutions/netweaver/pdf/BWP_SB_ExchangeInfrastructure.pdf
    XI integration with PSFT/Seibel ?
    Performance statistics of SAP XI
    /thread/154189 [original link is broken]
    publish subscribe with XI
    XI in SRM, CRM, MDM
    XI implementation - xi implementation
    Thanks!!

  • How to connect to MySQL back end in Syclo Agentry?

    Hello All,
           I have worked on Syclo agentry with Non-SAP back end (MsSQL) and with SAP back end(Work Manager App).
           But now I wanted to connect with MySQL Back end, I know that it is possible, because Syclo can deal with Oracle,IBM Maximo, MsSql and SAP(ERP,CRM...etc)
           But how to connect with MySQL Back end. What is the procedure and the Configuration changes.
           Could anyone help me out to find the way.
    Thanks,
    Swaroopa.

    Swaroopa,
    You may also need to create/define your database globals if you are using SDML database tags in your queries.  For example  <<database.getSystemTime>> will evaluate differently for MySQL compared to SqlServer or Oracle
    You will want to create a mysql_sd.ini file containing the various database SDML tags and their corresponding MySql values.  I would suggest copying the sqlserver_sd.ini and then update based on mysql syntax.
    You will then want to update your Agentry.ini queryConstantFiles entry for the mySql backend settings to point to your new filename.
    --Bill

  • How to connect my friends apple notebook through video call

    HOW TO CONNECT TO A FRIEND WHO IS USING APPLE NOTEBOOK FROM MY IMAC SUGGEST ME WAITING FOR A SOLUTION FROM APPLE TEAM SUPPORT

    Hi,
    Typing in all upper case is regarded and shouting here.
    Presumably as you have posted in the OS X 10.7.x (Lion) area you are running this version of the OS on your iMac.
    This will have iChat 6 on it.
    This can use AIM, Jabber and Yahoo IDs within the app.
    Apple IDS ending in @mac.com and iCloud issued @me.com and @icloud.com are also Valid AIM Screen Names.
    If you use Googlemail and Enable "talk" in the products there you can then use your Google Mail ID as a Jabber ID (although it has it's own Add Account option in iChat)
    Facebook has an option to Enable "Chat" which will give you a Chat ID variant on your name there and this can be used in iChat (or Messages) as a Jabber ID.
    The Yahoo Account will only do Text chats.
    It also has to be an actual ID registered at Yahoo.
    Chats are then AIM to AIM or Jabber to Jabber or Yahoo to Yahoo.
    So your Buddy will also need a suitable ID or Screen Name  for the relevant service.
    8:16 pm      Sunday; January 19, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

    how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

    You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
    Check your MacBook Pro model year against the list in this Apple tech note:
    About Mini DisplayPort to HDMI adapters
    Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

  • I need to know how to connect my macbook to the tv

    I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.

    Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
    Luck
    E

  • How to connect a Sony Bravia TV to the internet through your Airport network

    Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
    My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
    Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
    The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

    I have now had a detailed reply from Sony Europe and the way to do this is to:
    1.       Press Home on the TV Setup
    2.       Use the right and left arrow to select Setting.
    3.       Use the up and down to select Network, press Enter.
    4.       Select Network Setup.
    5.       Select Wireless setup.
    6.       Select Scan
    7.       Select your network
    8.       A new screen will appear asking for entering the security key.
    9.       Enter your WPA2 key.
    10.   Select Enter.
    11.   It will take you back to the same screen asking for entering the
    security key.
    12.   Press the right arrow.
    13.   Select Auto.
    14.   Press the right arrow.
    15.   Select Save and connect.
    These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

  • How to connect my Mac book Pro to a TV

    How to connect my MacBook Pro to the TV using HDTV cable

    I am assuming your TV has HDMI connector.
    In that case, if your MacBook is the retina-one, you have HDMI connector there too. All you need is HDMI cable to connect teh two.
    If your MacBook has thunderbolt port instead, you need Mini DisplayPort to HDMI adapter and HDMI cable.
    Hope this makes sense.

  • How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

    How to connect old aiport express to my new Airport Extreme?
    I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
    I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
    I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
    I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
    My Ipad says "base station e5713b cannot be configured."
    I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
    My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
    Sigve

    Hi
    Thanks for Swift reply.
    Yep - I in fact have two A1088 and one A1264
    I actually bought the new router because the Jensen
    router always lost connection to the Airport Express after some hours or days. I
    always needed to restart my Jensen to play music and that was driving my wife
    mad. The hope was that the Extreme should fix this. Both A1088 have been set up
    to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
    Are the A1088 now useless?
    The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
    Please advise
    Regards
    Sigve

  • How to connect my iPhone and iPad to Apple TV

    How to connect my iPhone and iPad to Apple TV

    Connect the iPad and Apple TV to the same WiFi network. Double Tab the home button on the iPad and then swipe your recently used apps from left to right until you see the mirroring icon which looks like a retangle with an up arrow. Tab that icon until you see the Apple TV. Tab Apple TV and slide the slider to the ON position. You should now see your iPad screen on the TV the Apple TV is connected to.

  • How to connect my ipod to itunes if my ipod is disabled and my top button is broken

    how to connect my ipod to itunes if my ipod is disabled and my top button is broken

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?

    How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?
              Thank you, Morty S.

    I have a perfectly-working LW 4/600 with exactly the same issue. They use localtalk - a long obsolete network connection, that doesn't connect to modern networks, and appletalk as the comm protocol.
    I think the only choice you have is to use an old powerPC Mac as print server. You tell me which old Mac you have, with a localtalk connector, or that runs OS X 10.4 or earlier (so it speaks appletalk), and I'll tell you how I've done it for the past 11 years or so.
    Right now I use a G4 running 10.4.11, plus an etherMac ethernet to localtalk adapter.
    Before, I used a PMac 6100 running LPD server software.

Maybe you are looking for

  • Heavy battery drain in iOS7 with iPhone 5

    Hello everyone, As soon as Apple announced its newer upgrade, iOS 7, i've installed that but i noticed a heavy battery drain in my iphone 5. For example, yesterday night i charged my phone to 100 % and by today's morning it was at 77% ( without any u

  • I have 3.4 years of ABAP experience. Planning to learn SAP BI and Move to BI. Kindly Suggest

    Hi Experts, I have been working for almost 3 and half years on SAP ABAP. Now i am planning to Learn SAP BI/BW and move my carrier to SAP BI/BW Completely. What would be the opportunities and carrier growth in the coming years for this combination. Pl

  • Multiple Idocs (DEBMAS/ADRMAS) with SERDAT serialization to PI

    Hi All, I have a requirement that R3 systems sends data by means of serialization Idocs SERDAT basically which has two Idocs DEBMAS/ADRMAS. I need to generate a single structure at target side out of two incoming Idocs (DEBMAS/ADRMAS). Could any one

  • 3TB fusion drive and bootcamp

    Hi everyone, I know there have be multiple posts on this, however I have a late 2013 iMac with OS X 10.9. I know Apple states support for bootcamp with a 3TB fusion drive from 10.8.3 fowards, however I wish to install Windows 8.1 pro from a full DVD

  • Have to reconnect wireless every time I log on

    I have been connection to my home wireless network for several years and it has always stayed connected. Now everytime I log on to use my Mac Book I have to reconnect to the wireless network. Any ideas why it is now dropping the connection?