How to connect via bluetooth with wireless printer

how to connect my macbook pro via bluetooth with epson all in one wireless TX600FW

Bluetooth between iOS devices and computers is only for Internet tethering, nothing else.
See: http://support.apple.com/kb/ht3647

Similar Messages

How can i use my iPhone 4 and connect via bluetooth with my macpro

how can i use my iPhone 4 and connect via bluetooth with my macpro

The only way that you can connect your iPhone to the mac is to use it for a "Wi-fi hotspot" meaning that you can use the celluar connectivity of your phone to connect your computer to the interent.
Do you mean a MacBook Pro of the desktop MacPro?

My iphone 5s is connected via bluetooth with mercedes benz e class. I can make the calls and receive the calls but music of my phone can't be play via car music system so pleaase help.

My iphone 5 s is connected via bluetooth system with my car mercedes benz e class. I can make calls & receive calls but my phone music can't be play via car music system. The car muisc system can't find external devise if it is connected with i phone 5 s via bluetooth or via cable.

Hello parthivfromahmedabad,
Thanks for using Apple Support Communities.
To troubleshoot issues with car stereo bluetooth connections please follow the steps in the article below.
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Take care,
Alex H.

My htc desire 612 won't connect via bluetooth with my buick encore

I'm having trouble connect the HTC with bluetooth to both my car and my garmin vivosmart. Any ideas?

It will not connect because transfering data to other phones via bluetooth is not supported on the iPhone.

How to Connect a USB-to-Wireless printer to a Wireless Network without a PC

Some printers from HP do not have a Wireless Setup Wizard built into the front panel for connecting to a network. These models install to a computer through a USB connection and the software then sends the wireless information across the USB cable to the printer. However, you may not always have a computer present and still need to connect these printers to a wireless network. You can use a wireless device, such as an iPad, to do this. For the example below I have used an iPad and a Deskjet 3510 series printer.
The first step is to make sure your printer is broadcasting a network (Ad-Hoc). To do this, turn the printer on and press the wireless button or turn wireless off, then on in the Setup menu. Connect the iPad (or other wireless device) to the wireless signal being broadcast by the printer.
Once the iPad is connected to the printer as a network connection, open the Web Browser on the iPad. Type 192.168.223.1 in the address bar and go to that site. The printer's status page should load and look similar to the image below.
Click on the Network tab at the top of the Status page. You may get a prompt warning about being redirected to an HTTPS site. Click Ok on the message box to continue. When you click OK, you may get a warning regarding the certificate or server identity. Select the option that lets you continue. The wording will vary from browser to browser, but there should be an option to continue anyway.
Network status page should now be loaded at this point. Select Wireless Setup Wizard to start the wireless network setup and click Next.
When next is selected, it should list the available wireless networks. Select your network from this list and select next. When the network is selected, it should be highlighted.
Enter the network’s password, if any, and select next.
A message should be received indicating the name and if security is enabled. The message below that should indicate the settings were saved successfully. If it says the settings were saved successfully with an error, the network setup is more than likely functioning. Select Ok at the bottom.
After selecting OK, select Status to verify the printer is connected successfully. It may take a few minutes for the wireless light on the printer to stop flashing. Once it is a solid blue, the printer should be on the network and functioning.
Once this is completed, then you will be able to reconnect to your normal wireless signal (Wireless Router) for internet access. Now both the iPad and printer are on the same Home Network.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.
This question was solved.
View Solution.

Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How to connect Canon MP470 with USR5461 Print Server on Leopard 10.5

The main problem I had with adding this printer is that the drivers from Canon's website do not work. Do not download and use the CUPS driver provided from Canon.
You need to use this driver which should be included on your MacBook: Canon PIXMA MP150 - Gutenprint v5.1.3
Here are the steps:
1) Go to System Preferences
2) Click on Print & Fax
3) Hold down alt/option next to control and click the + sign to add a printer.
4) Select advanced from the tabs above. Note: If you do not see an advanced icon on the top toolbar, right click and click customize toolbar to add the advanced button (the fact that you have to do that is weird to me).
5) Wait for a little while when you enter into advanced and it will eventually give you a list of printing protocol types. Select the drop down labelled types and select Internet Printing Protocol (http)
6) Enter the URI http://192.168.2.1:1631/printers/My_Printer
7) If you changed your router address replace 192.168.2.1 with whatever address you use to access your router's settings page.
8) Select the driver Canon PIXMA MP150 - Gutenprint v5.1.3
9) You may enter the location of your printer if you want i.e. Brad's Room or where ever your printer is located.
10) Click add printer.
11) You should be back to the Printer & Fax screen. Double click the newly added printer on the list to your left. That will open the printer queue.
12) Then select Printer from the system menu on top and select print test page.
13) Make sure your printer is on and everything is connected.
14) Happy printing.

Actually there is a better way. I had been having problems on my new Macbook with OSX 10.5 but not on my Mac Mini running OSX 10.4. After doing some searching I figured out that it had something to do with the way 10.5 handles CUPS whatever that is. After sitting on hold with Apple forever they blamed it on USR even though my other Mac running 10.4 and my Windows machines all work fine.
Since Apple refuses to admit it is there problem here is the work around I came up with. It is a two parter. Before you start make sure your printer driver is installed just like you would if your printer was connect directly to your Mac.
First Part
1) Open the "printer and fax" control panel
2) Delete the old printer set up through the USR5461
3) Click the "+" sign to add a new printer
4) Here is the tricky part apple doesn't tell you. You need to go into "advanced set up but there is no obvious way to do that. Right click on the blank spot next to more printers and select "customize tool bar".
5) Click and drag the sprocket called "Advanced" to the tool bar"
6) Then click the "advanced" icon in the tool bar.
7) Give it a few seconds before clicking anything. Then in the "type" drop down menu choose "internet printing protocol (http)"
8) Enter the IP address of your printer (the default for the USR5461 is http://192.168.2.1:1631/printers/My_Printer)
9) Name the printer and fill in the location field with whatever you like
10) From the drop down menu choose "select a printer to use" and then find your printer driver.
11) Then hit the "add" button at the bottom and you are done with the first part
Second Part
1) Use your browser to go to http://192.168.2.1/device.asp (this may require you to log into your USR5461)
2) About halfway down you will see "Check the U.S. Robotics Web site for an update." and click the link
3) The link takes you to a page where you have to select your device (USR5461 under "wireless")
4) There you can find a "beta firmware update 3.93.35.0.9 (Jun 5 2008)", download that.
Then go back to http://192.168.2.1/device.asp and upload the firmware file and choose "ugrade"
5) Once you do this it will take about 30-60 seconds for your USR5461 to come back online. Wait until it is completely rebooted and check the firmware to make sure the update is correct. If so you are done with the second part.
Now try printing. I hope this works for everyone.
Well, to get the Advanced tab choice, I had to customize the Add Printer toolbar: there you can add a handy Advanced button. Press that, and there you'll find the Tiger functionality hiding!

I can't connect via Bluetooth with my JBL Flip with iOS 7.1

Since the iOS 7.1 update, my iPhone 4s won't pair with my JBL Flip. It shows up as a nearby device in Bluetooth settings, but I am unable to pair with it or connect at all. Please help!

I had the same problem with iPad Air and iPhone 5S. Try this- go to settings, Bluetooth, devices, JBL Flip - tap the "i" to "Forget This Device". Then turn the JBL Flip on, wait for a beep, then hold the power/pair button down until it flashes red/blue and you should hear 2 beeps. This should pair it it your device, then tap JBL Flip on your phone (while the blue/red is flashing), it should connect now.

How to connect via telnet with Java?

I want to develop an application in a server with solaris 8. I want to access from this server to another server in a LAN via telnet and write down the information i am getting in a file. How i can do this in java? it's a good alternative? or i should try C++. Thanks in advance.!

You can easily use java....just get a hold of the RFC for Telnet or if you look around, you can find code on the net already working.

6300 connectivity via bluetooth with laptop

I am having problems with connecting my phone to my laptop.
I start the PC Suite and click get connected, then select bluetooth connection and next. This then identifies my phone (it has a blue padlock symbol by the side of it, what does this mean?), I then highlight my phone and click next. Then next with the passcode and click accept on the phone to pair, then type the passcode in to the phone. Then the phone asks to connect with the laptop and I click accept on the phone and they are connected. In the PC Suite is says I have my phone as an available connection, however in the main PC suite menu screen I still have no connection. The PC suite does connect but then immediately disconnects its self. I don't know if it's the phone of laptop disconnecting? Why won't the phone and laptop stay connected?
The phone does however connect when using a USB cable.
Any suggestions or help much appreciated as this is really starting to drive my patience!!!

It would appear that the Laptop recognises the phone as a headset?

How to connect epson workforce 610 wireless printer

I had it printing one time, and somehow info got lost in settings Print and Scan. I thought I put back right info but now it doesn't print at all. Any info would help.

Hello:
Your printer is supported in OS X 10.8. Read this article, I think it will help you:
http://support.apple.com/kb/PH11143
Barry

How to connect my cannon mx470 series printer with bluetooth to my mini mac?

how to connect my cannon mx470 series printer with Bluetooth to my mini mac

Does the printer actually support BlueTooth? If the printer is wireless, then most likely it uses Wi-Fi. Did you read the user guide that came with it? Or contact Canon tech support at their website.

Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

Hi Tomiwa,
You cannot print from the iPad to that printer. AirPrint and Bluetooth are completely different.
There may be apps you can buy that will enable using that printer, but that is not an ideal solution.
That particular printer has had many bad reviews, and is unreasonably expensive for its features. Considering that you just bought the printer, as well as its lack of AirPrint, I suggest you return it and buy a printer that supports AirPrint.

HT4970 I bought a printer Polaroid POGO, MINI PRINTER. I can not connect it via Bluetooth with my iPhone 4. Is there an app to solve this problem, because I'm Judicial Medical Expert, and I need this tool for quick things. grateful

I bought a printer Polaroid POGO, MINI PRINTER. I can not connect it via Bluetooth with my iPhone 4. Is there an app to solve this problem, because I'm Judicial Medical Expert, and I need this tool for quick things. grateful
Max Cavichini
Medical Legal Expert
Problem ipad and i phone

This has never been a feature of iphone,ipod touch or ipad.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either. I get an error message with multiple suggestions but none of them apply to my situation.
I am so dissatisfied with this printer. I'm sorry I got it from Amazon because now it is a hassle to return it. I will never buy another Canon.
The printer menus are confusing. I hate using it. I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model. Never again. Stick with cameras.
Marcy Hotz

This note won't be as angry and frustrated as the last one...
Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer. I deleted all the old stuff.
I also had several scanning applications on my drive which just confused me.
When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which). So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
It works now. So I'm satisfied, will keep this maching. I just had to take some time, sit down and focus on the problem.

How to change ringtone when connected via bluetooth

When the Z3C is paired via bluetooth with my car audio system, the Z3C playes a different ringtone then the one which I have set as default.
How can I change (set) the ringtone when the Z3C is connected in my car?

I'm not to sure but I would imagine it has something to do with Smart connect and how it's setup when paired
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

How to connect via bluetooth with wireless printer

Similar Messages

Maybe you are looking for