How to connect video output from laptop to a TV

Hi All,
We are in a major quandry. My wife purchased a Mac Book and we are supposed to do the slide show for my sister's wedding which is tomorrow (July 13th). We just got home and the "genius's" at the Apple store gave her the wrong cables. We need to get the cables so that we can hook up her Mac Book to the TV. Does anyone know which cable we need to purchase.
Thanks!
KT

Oops, might be too late for an answer but the safest adapter to buy, not knowing anything about the TV, would be the Mini DVI to Video Adapter. Then you should also have on hand an S-Video cable, a Composite Video cable and a Stereo Mini Jack to RCA Audio cable. That should cover it.

Similar Messages

  • HT4113 my iphone screen is broken ,how can i open device from laptop ??

    my iphone screen is broken ,how can i open device from laptop ??
    plase ,help me what can i do to fix this device   & the VGA is not work good i think there is short in VGA ,please help me  what can i do....

    Connect the phone to iTunes on your computer, right click on it in the device list and choose "backup". This will save your data and settings.
    Purchases can be transferred by choosing "transfer purchases".
    After that import photos or videos to your computer.
    You can use the backup again to restore the phone after it has been serviced.
    iOS: Back up and restore your iOS device with iCloud or iTunes

  • Video output from iPod Touch (2nd gen) via AV Component Cable (no audio)

    Hi, I'm trying to output a video from my iPod Touch (2nd gen) to my TV via a AV Component Cable.
    Unfortunately the audio doesn't work, I'm sure they are all connected into the right places.
    The video works, but I get no audio. (And no subtitles when closed caption is on)
    Here is a link to an image of the TV connections from ImageShack:
    http://img707.imageshack.us/img707/7280/img0204y.jpg
    At the top left of the image, are what I assume to be the red and white audio ports, highlighted in red.
    I plugged in the red and white audio connectors into those ports.
    And towards the bottom are three ports, green, blue and red, also highlighted in red.
    I plugged in the green, blue and red connectors into those ports.
    I changed the input of the TV to Input 2, I see the video for the movie I'm watching on the TV but no audio. I tried multiple movies.
    I've also tried changing the video output from PAL to NTSC and back again, turning Widescreen on and off and turning Closed Captions on and off. I also tried plugging in the red and white audio connectors into the row of ports just below the green/blue/red row, to see if that made any difference, and it didn't.
    I tapped the bottom left button of the iPod Touch when plugged in to the TV and playing video and it came up with an option that was selected called ~"Audio Source: English (Stereo)"
    Any idea's? Thanks.

    Resolved... ThankYou

  • How do I transfer Contacts from laptop to iPhone?

    Found iPhone this a.m. to have had all contacts deleted. How do I transfer Contacts from laptop to phone...

    Enable sync for Contacts in your iCloud account. Go to System Preferences > iCloud. Check Contacts.
    Make sure your iPhone is set to sync to iCloud contacts.

  • How do I download photos from laptop to ipad

    how do I download photos from laptop to ipad

    You can also email the photos to yourself, open the email on your iPad and save the photo to your Camera Roll. But for a large number of photos, the above referenced syncing is better. Just be aware that synced photos from iTunes can only be deleted the same way - using iTunes.

  • How to transfer ripped music from laptop to Ipad or iphone

    How to transfer ripped music from laptop to Ipad or iphone

    drag them into itunes or chose file menu and add to lib and navigate to the songs
    and when in the itunes lib you sync them like any other itune media
    if you have problems syncing general media too then
    try google
    sync music to ipad it should give you tons of guides both youtube and text guides

  • How do i save file from laptop to my iphone

    how do i save file from laptop to my iphone

    There are apps that do this. I've used an iPhone App Excelcontacts for a couple of years to do just this. Should work fine on iPad. There are other apps that do this, too.

  • How to connect oracle database from tuxedo

    Hi,
    How to connect oracle database from tuxedo.
    If any one can help me.
    Regards,

    it depends on configuration your going to choose, there are two ways--
    - Using X/Open standards, for this
    you have to make an entry of Resource manager in $TUXDIR/udataobj/RM file.
    Then in UBBConfig file in GROUPS section u have to set Openinfo.
    It also depend on which database you are going to use.
    In your service now you need to call tpopen() API from tpsvrinit() function.
    - Other possibility is, take an implicit connection using Pro*C or Pro*Cobol whatever platform you are using.
    EXEC SQL Connect ...

  • How to connect informix database from informatica through JDBC instead of ODBC

    How to connect informix database from informatica through JDBC instead of ODBC.

    Hi mate,
    You may get fast reply for this in informatica forums.
    Thanks
    http://mkashu.blogspot.com

  • How to connect to db from sql navigator ?

    database active and working.
    login from web working normally.
    how to connect to db from sql navigator ?

    Remote connections generally need three bits of information, whether its an oracle, odbc, or some other type of client ...
    1. Where does the database "live" (hostname or IP address)
    2. What port is the database listener "listening" on for connections
    3. What is the database service name or $ORACLE_SID
    Default port is 1521, if its an XE install the service name is XE out-of-the-box (as set up by the installer and no DBA intervention.)

  • How do i transfer music from laptop to iphone

    how do i transfer music from laptop to iphone

    see Here  >  Syncing with iTunes
    From Here  >  http://www.apple.com/support/iphone/syncing/

  • Does anyone know how to convert the output from the standard report to xml?

    Does anyone know how to convert the output from the standard SAP report to xml?

    since it a standard report which you cannot modify you can only do the following.
    submit report exporting list to memory
    then
    list from memory and then
    use the returned itab along with CALL TRNSFORMATION key word to convert to xml.
    but this only going to place the whole list content (including data and formating lines,etc) into a xml element and not the actual data alone in the list .

  • TS2756 How to download videos taken from ipad to my computer

    How to download videos taken from ipad to my computer

    You can try Photo Transfer App
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/269f20976d04dad82b5 3a6ad61a2d2c5.jpg
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/79b3173fda7b6a6e148 5b463198f6acf.jpg

  • No digital video output from XVR-300 in Ultra-45

    I am switching from solaris 10/x86 to sparc. I have a new Ultra-45 with XVR-300 graphics adapter. It's running Solaris 10u4. The system was ordered as a standard configuration from the catalog.
    The XVR-300 graphics adapter currently produces no digital output. My Sun A1240P0 24" monitor reports no signal on the DVI input. That is, there is no digital output at power on (boot ROM), during Solaris boot (terminal), nor after Solaris finishes booting (X).
    The graphics adaptor uses a connector with two video outputs, and comes with a splitter cable with two DVI output connectors. I get no video output on either. The DVI cable I am using is the one that works when connected to the graphics adaptor on the old system.
    I added a VGA adapter plug to connector 1 of the splitter cable, and was able to get an analog signal to drive the display via the VGA input connector.
    The manuals for the Ultra-45 and for the XVR-300 make no mention of analog vs digital output. They both just say to connect the adapter to the monitor.
    Since I can get analog output from the SVR-300, the card is basically working. The DVI cable and the monitor's DVI input work with another system. The only variables are the digital output from the XVR-300 and the splitter cable. (The splitter cable's analog signals work.)
    How can I activate digital output and make it the default?

    try this page........
    http://docs.sun.com/source/819-6651-13/chap2.install.html#50589705_pgfId-1001195
    To Set the Sun XVR-300 Graphics Accelerator as the Default Monitor Console Display
    1. At the ok prompt, type:
    ok show-displays
    The following shows how to set the console device:
    a) /pci@1f,700000/SUNW,XVR-300@0
    b) /pci@1e,600000/pci@0/pci@8/SUNW,XVR-300@0
    q) NO SELECTION
    Enter Selection, q to quit:
    2. Select the graphics accelerator you want to be the default console display.
    In this example, you would select b for the Sun XVR-300 graphics accelerator.
    Enter Selection, q to quit: b
    /pci@1e,600000/pci@0/pci@8/SUNW,XVR-300@0 has been selected.
    Type ^Y ( Control-Y ) to insert it in the command line.
    e.g. ok nvalias mydev ^Y
         for creating devalias mydev for
    /pci@1e,600000/SUNW,XVR-300@5
    3. Create an alias name for the Sun XVR-300 graphics accelerator device.
    This example shows mydev as the alias device name.
    ok nvalias mydev
    Press Control-Y, then Return.
    4. Set the device you selected to be the console device.
    ok setenv output-device mydev
    5. Store the alias name that you have created.
    ok setenv use-nvramrc? true
    6. Reset the output-device environment:
    ok reset-all
    7. Connect your monitor cable to the Sun XVR-300 graphics accelerator on your system back panel.
    Man Pages
    The Sun XVR-300 graphics accelerator man pages describe how you can query and set frame buffer attributes such as screen resolutions and visual configurations.
    Use the fbconfig(1M) man page for configuring all Sun graphics accelerators.
    SUNWnfb_config(1M) contains Sun XVR-300 device-specific configuration information. To get a list of all graphics devices on your system, type:
    host% fbconfig -list
    This example shows a list of graphics devices displayed:
    Device-Filename Specific Config Program
    /dev/fbs/nfb0 SUNWnfb_config
    procedure icon To Display Man Pages
    single-step bulletUse the fbconfig -help option to display the attributes and parameters information of the man page.
    host% fbconfig -dev nfb0 -help
    single-step bulletTo access the fbconfig man page, type:
    host% man fbconfig
    single-step bulletTo access the Sun XVR-300 graphics accelerator man page, type:
    host% man SUNWnfb_config
    haroldkarl

  • Video output from iphone4 to TV

    Hey you guys!
    Just wanted to know, If i have my iphone pluged in to my TV via the
    RGB (video) + L/R (Audio) cables i got from the Apple store, Can i acctually use my TV as the monitor instead of the iphone4 itself ?
    The reason i ask is, I can already watch movies from my iphone4 on my TV. but can i do anything else ? like play a game or browse the web with Safari ?
    And if so, can you give me some tips please ?
    Thanks

    So how does Steve Jobs do it at those Apple events he holds?
    He has a special iPhone. (Apple does favors for him.) Since that phone is always used with a cable connected, it doesn't need a battery, so has space available to add extra circuitry for digital video output. Most customers would rather have a phone with a battery.

Maybe you are looking for

  • XSLT producing different results via debugger and xslt.Transform()

    I'm producing the body of an email via an xsl. I've been having a problem with the html nested inside a <table> tag not displaying correctly. With a bit of help from the good folks over at the asp.net forums, I've tracked the problem down to getting

  • Photos not visible in iPhoto 6

    I'm a Mac newbie, and haven't been able to figure out the following situation. I transfered all of my .JPG files from my PC to the 'iPhoto Library' using my home network. Problem: I can't seem to see any of my pictures using iPhoto or other applicati

  • HRPAD00INFTY

    Hi all, I wrote a BADI when infotype 171 is created or saved and will update a date field (Z5 date field)  in infotype 41. This works fine. I wrote another BADI for infotype 41, whenever 41 is created or saved this BADI will create a Z6 date field in

  • How would I do the following transformation to text

    Im transforming an .xml to text to be inserted into the body of an email. The text is made up of numbered lines. Im trying to align the information but its coming out looking like this 1.John abcd 1234 2.Joe dcd 1 3.James a 5222 I have attempted to m

  • Network User appearing twice in connection tab under file sharing

    I have one of my network users that appears twice under the connected Users tab in the File Sharing service (Lion Server). It only appears to be happening with one of the users.  When they log in they get shown twice with the same IP address although