How to connect WebDav URL in Windows 7  to a Folder of KM.

Hi,
I have EP 7.0 SP 21.
When I tried to map a network drive in Windows Explorer  to the WEBDAV URL of the Portal , don´t accept the URL. It said the folder is not valid. I know are problem with WebDAV in Windows 7. but not are a solution to this yet.
Thanks in advance.

Hi Luis,
we have the same problem and it seems that there are generally problems with Win7 and WebDav and not with Portal in particular.
Here are some links, hope that helps:
general:
[http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/67c361c0-ed6a-4e82-81df-da149c96492b|http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/67c361c0-ed6a-4e82-81df-da149c96492b]
[http://www.techiechips.com/web-folders-web-disk-webdav-problems-on-windows-7/|http://www.techiechips.com/web-folders-web-disk-webdav-problems-on-windows-7/]
performance:
[http://oddballupdate.com/2009/12/18/fix-slow-webdav-performance-in-windows-7/|http://oddballupdate.com/2009/12/18/fix-slow-webdav-performance-in-windows-7/]
Good luck
Joerg

Similar Messages

  • How to connect HTTP URL

    hai guys,
      I developed one report and data downloaded into application path and file format is CSV. My development was working fine . Now I want to change file downloaded into FTP location ( this is also working). Now i want to connect HTTP URL path.
    How to connect HTTP URL path ( Not Open method  only connect)
    Thanks in advance

    Hello,
    U can make use of these Fm to connect to URL.
    Use this code.
    CNHT
    CALL FUNCTION 'WS_EXECUTE'                        "#EC *
      EXPORTING
        COMMANDLINE        = LV_CMDLINE
        PROGRAM            = LV_PGMNAME
      EXCEPTIONS
        FRONTEND_ERROR     = 1
        NO_BATCH           = 2
        PROG_NOT_FOUND     = 3
        ILLEGAL_OPTION     = 4
        GUI_REFUSE_EXECUTE = 5
        OTHERS             = 6.
    IF SY-SUBRC <> 0.
    Where LV_CMDLINE = WWW.SAP.COM
          LV_PGMNAME = IEXPLORE.EXE
    If useful reward points
    Vasanth
    Message was edited by: Vasanth M

  • Can't open webdav URL in Windows Explorer

    I am working on a page that searches for collections (folders).
    From the results page I would like a link that opens the folder in Windows Explorer.
    But when I click on the webdav URL it opens UCM "browse folders" view.
    I have installed DIS, but it didn't help.
    I have a "network place" setup.
    I can create a shortcut to open webdav in Windows Explorer, just can't do the same with a URL.
    Thanks

    Our consultant found an easy way to open a webdav folder with the windows explorer from a form (IE only).
    <form method=GET name=webfolder action="http://myserver.na.d-rco.com:7797/dridctest/idcplg/webdav/Contribution%20Folders/" folder="http://myserver.na.d-rco.com:7797/dridctest/idcplg/webdav/Contribution%20Folders" style=behavior:url('#default#AnchorClick') target=WebFolder>
    <input name=sm type=submit value=Open>
    </form>

  • HT1600 how to connect appel tv with windows 7?

    HI how to use appel tv with windows 7???

    Turn on home sharing in iTunes and stream (same network and apple id).  If you want to mirror your pc you need a programme like reflectorapp or airparrot (www.airparrot.com) to do it, a third party app.
    regards
    jules

  • How to connect i pad with windows 7 laptop to share music files

    I'm trying to connect my i pad to my hp windows 7 laptop to no avail.

    Hi tweetdledee7,
    It is unclear if you would like to learn how to sync media between your iPad and iTunes Library, or if you are having trouble doing so. The following links may help you find a resolution:
    To learn how to sync, take a look here:
    Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support
    If you are experiecing issues, this may help:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • Any one know how to connect by url ?

    Do any one know how to communicate between servlet
    & applet by http url instead of "socket"?
    Do any one have sample source codes ?
    Thanks a lot

    Perhaps not quite what you're after, but I use Datagrams to talk between an applet and a servlet. I found this much easier than trying to set up a socket connection myself. Check the java tutorial for an example
    Steve

  • How to connect hpdeskjet 820Cse to windows 7

    Need to connect to printer. connected cable and the printer drivers install but files go to print queue and disappear

    Do you have a 64 bit version of Windows 7?  If so you will need the patch available from here: http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Deskjet-710-720-810-820-100-Series-prin...
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to connect my iPod to Windows System??

    hey guys, i need your help, how can i transfered my files to pc? currently my iPod is been format in Macintosh OS and then the problem come out when i want to tranfered my files to my friends computer which is Pc laptop, it said that the Pc cannot read my iPod.
    please help me to find out the solution? thank you

    The iPod does not support that feature.

  • [SOLVED]how to connect remotely to a windows machine

    hello all,
    I've tried both rdesktop and tsclient but both of them will log out the computer im trying to remotely control and thats not exactly want. You know just like dellconnect does with its clients and lets them see what the fuck is happening. Both rdesktop and tsclient will only leave the client computer all logged out without any clue to whats happening. Is there any other software that can achieve this kind of behavior?
    thanks
    Last edited by aluser (2011-02-20 03:46:21)

    Wittfella wrote:vnc
    That's exactly what I was looking for. Solved.

  • User cannot access redirected Documents folder, but can connect to share in Windows Explorer and access folder on server

    I am in the final stages of a cross-forest migration.  Users have Windows 7 workstations with redirected folders on a Windows Server 2012 box running in the old forest.  User accounts were not migrated.  The accounts in use have always
    been in the "new" forest.  One of our challenges was the large volume of data in redirected folders.  I made sure users in the target forest had continued to have access to their redirected folders in the old forest and robocopied
    the entire users share, copying the permissions with the files.  By doing incremental robocopies, we can get a final copy done now in about six hours.  The plan was simple: copy the files, do an incremental copy every night, on the night of the cutover
    change the folder redirection policy Documents path from
    \\oldserver\users\%USERNAME% to
    \\newserver\users\%USERNAME%. The policy is configured to NOT copy user files from the existing folder to the new redirected folder.  Everything was going well until I tested the policy change.  After the folder redirection policy is updated
    and applied, the user cannot access the private Documents folder.  For example, user Chester Tester logs on as ctester.  I open Windows Explorer and click the Documents shortcut.  I see one subfolder, which is subfolder of Public Documents. 
    So I can look at Public Documents but when I click on the Documents folder (Under the Documents library link) I get an access denied error.  Now for the kicker, if I open another Windows Explorer window and edit the address bar to
    \\newserver\users\ctester, I can navigate the Documents folder tree and see my thousands of documents. What the ....?
    I'm hoping this is something really simple to fix!
    TIA

    HI Vivian,
    Thank you for your reply.  Yes, the path in Group Policy Folder Redirection Root Path was updated to
    \\NEWSERVER\users.  I had planned to point this to the distributed file system, so the first used was actually
    \\domain\dfs\users.  To simplify things I have backed off to copying to just a normal share
    \\newserver\users. 
    We are using BASIC folder redirection and we create a folder for each user under the root path. 
    We did not want the policy to move content, as we were seeing users requiring 15-20 minute logon times  (or higher) after the policy is changed.
    Grant the User exclusive right to Documents - Disabled
    Move the contents of Documents to the new location - Disabled
    Related folder settings
    Video - Follow Documents
    Music - Follow Documents
    Pictures - Follow Documents
    Now when I change the folder redirection from old server to new server I now have TWO My Documents folders in the user's redirection folder on the server.  The redirected Documents points to an empty folder set.  The copied folders with all user
    data are there, but folder redirection refuses to recognize the original folder.
    I am looking at the full view of the folder, nothing hidden, so I'm wondering how a folder can have two subfolders with the exact same name.  For now, I just want the redirection to move from the old server to the new server properly.  I deleted
    the new My Documents folder, rebooted the user's workstation and tried again.  The behavior repeats itself, i.e., a new My Documents folder is always created when the redirection policy is changed from the old server to the new server.  The environment
    has about 1500 users with approximately 1.3TB of data in the redirected Documents folders.  OUCH!

  • Oracle 10g on Windows - How to connect?

    May be this is a small one, I dont know how to connect to sql in windows.
    I installed oracle 10g on Windows XP SP3, choosing basic Installation.
    Successfully Installed.
    In Linux we use sqlplus '/as sysdba' to connect and we get sql> prompt.
    In windows how to connect or get SQL> prompt?

    You can remove the quotes. Like Unix, this only works by default if you are connected as operating system user owner of Oracle Database software installation.
    C:\>sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jul 24 08:54:01 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    SQL>

  • How to connect BR*TOOLS STUDIO to oracle on windows server

    HI ,
    We have some oracle databases on AIX and few on windows 2003 servers.
    BR*TOOLS studio connects fine to AIX systems but How to connect it to
    windows servers.
    I tried to use free utility "psexec". but then studio log shows following error.
    ERROR 2008/12/02 12:21:13 [Tools] Instance SLB reports
    exception while running job Control Files: CreateProcess: psexec
    vmsld2 -u slbadm -p ba5al1te brspace -confirm force -language E -
    user / -function dbshow -class cfinfo -file all_cf error=2
    However if I execute "psexec
    vmsld2 -u slbadm -p ba5al1te brspace -
    confirm force -language E -user / -function dbshow -class dbstate"
    remotely from dbstudio server at command line, it works fine.
    So, Is DB*TOOLS STUDIO only for UNIX systems or can it be used for
    WINDOWS also ? IF yes then How ??

    Hai,
    Have you followed the below mentioned steps:
    In your BR*Tools Studio home directory, call:
    In UNIX
    csh server.sh
    In Windows
    server.cmd
    This script starts a web application server based on Oracle Containers for Java
    EE (OC4J), which serves as the runtime platform for the web application of
    BR*Tools Studio server.
    You need to run this command whenever you want to start the server for
    BR*Tools Studio in future.
    2. Log on to BR*Tools Studio server through a web browser from any client
    using the following URL:
    https://<host>:<port>/studio
    Note
    (C) SAP AG September 2008 Page 11
    Once BR*Tools Studio server is available, a client logon window appears.
    Make sure that you have enabled pop-ups for this site so that the logon
    window is visible.
    You need to run this command whenever you want to start a client session
    with BR*Tools Studio.
    The client logon window provides you with a list of all instances currently
    maintained for administration with BR*Tools Studio. The only instance
    available directly after installation is the Server instance, with which you can
    maintain the server landscape.
    As far as I know there are some unresolved bugs still existing in BR tools studio which is under process.
    Since you are able to open the studio with AIX you should be able to open in Windows as well.
    Have you checked your Keystore file.
    Regards,
    Yoganand.V

  • How to connect a printer to Airport in WIFI with Windows

    Hi,
    I just would like to know how to connect my printer (Samsung) to my Airport network through WIFI (My computer is working with Windows).
    Thanks

    Well the easiest would be to plug your printer directly into your extreme using either the USB or Ethernet connection.
    Make sure you then install bonjour and use the printer wizard to convert your printer...
    Bonjour Print Services for Windows v2.0.2
    http://support.apple.com/kb/DL999

  • How to connect windows live email setting

    Please tell me how to "connect windows live email setting".  Thank you.

    AnnaC these are the NEW settings for Verizon email
    Server
    Current Setting
    New Setting
    SSL Enabled
    Port
    POP3 Server
    incoming.verizon.net
    pop.verizon.net
    YES
    995
    SMTP Server
    outgoing.verizon.net
    smtp.verizon.net
    YES
    465
    Please let us know if this solves your issue.  
    If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
    http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

  • With HP6500A Windows Visa Cable hookup, how to connect printer to network

    With HP6500A all in one Windows Visa cable hookup, how to connect printer to network

    Welcome to the forums @TonyWE
    I understand you are looking to connect your Windows Vista computer, to your network. Below is the guide for you to follow to connect the printer wireless or wired to your network.
    I hope this helps
    Setting Up the Printer Software for a Wired or Wireless Network for the HP Officejet 6500A e-All-in-...
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for

  • Questions on the Hardware requirement mention in the 12c installation guide

    Hello experts, I have a confusion on the Hardware requirements mentioned in the 12c installation guide where they mentioned as below. RAM with ADP1, JVMD2 8 GB 12 GB 20 GB 1 ADP Manager is Application Dependency and Performance 2 JVMD is JVM Diagnost

  • Develop settings are not saved

    Hello, I'm working mainly with jpeg and psd files and trying to save all settings and metadata automatically to be able to use it from other applications (e.g.Bridge). The two catalog options "Include develop settings in metadata..." and "Automatical

  • Video Mode on Boot - Oracle Linux Server r6u2

    Having an issue. See posts on forums but they are very old and with no clues. When our servers boot up, our rack monitor says the video mode is not supported. We do not see anything past POST - no red line across the bottom. Nothing except for the me

  • G4 Sony CDRW in a G3

    Hello I've got hold of a Sony CD-RW (CRX155E) drive from work, it was in a G4 running on System 10.3. It fits in O.K. and the system profiler recognises it, but it's completely dead! Any advice much appreciated.

  • User Exit for warehouse management - transfer order sorting

    Hi, I want to sort transfer order of warehouse management by user exit, which user exit I can use? Kindly please advise. Regards