How to Connect Wii and Xbox360 wirelessly with SBC Home Portal

Greetings. Need help on hardware to connect Wii and Xbox360 wirelessly to SBC Home portal modem. Distance between connect points are about 50 feet plus and separated by floors and walls. What would work to acheive the connection? Thanks in advance for the help.
Sparrky

Configure the X-BOX & WII using the wireless connection same as in wireless router .....
Check the connections status on both the devices & see if you are online or not ....

Similar Messages

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

How to connect my iphone to iTunes with my imac so i can mannage my songs and other documents on my phone

how to connect my iphone to iTunes with my imac so i can mannage my songs and other documents on my phone

Launch iTunes on your Mac, plug your phone in, select it in the sidebar, select what you want to sync under the various tabs, hit the sync button. If the sidebar is not visible, go up to the "View" menu & select "Show Sidebar".

How to connect new iMac to tv with a hdmi cord on one end and a thunderbolt on the other end

how to connect new iMac to tv with a hdmi cord on one end and a thunderbolt on the other end

You need a > Moshi Mini DP to HDMI Adapter with Audio Support - Apple Store (U.S.) to plug into the ThunderBolt port and an HDMI cable.

How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart

How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart. We need connect by Adobe Encoder many people. what is differences between Adobe Media Server 5 Professional, Adobe Media Server 5 Standard and Adobe Media Server 5 Extended?

For the detailed list of differences across editions refer this link
http://www.adobe.com/in/products/adobe-media-server-family/buying-guide-comparison.html

How to connect Apple TV to ipad2 with air play

Hi...how to connect Apple TV to ipad2 with AirPlay

Hi. Your Apple TV should be connected to the TV (I'm using HDMI cables) and connected to the internet via a wireless or ethernet connection.
The best way to test AirPlay is to play a movie trailer from the iTunes store. When you play a trailer you will see the AirPlay symbol at the bottom of the screen. Click on it and it will show your AirPlay devices - in your case the Apple TV. Select it an your video and sound will come out of your TV.
I hope this helps. Google the AirPlay symbol. I tried to paste it into this message with no success.

How to connect "Next" and "Previous" ?

Hi everyone,
I am new in this with videoediting etc but I just managed to finish my first real videoproject and burned a DVD last night.
My first Encore project crashed after 3 days but I could start a new project and finish that one within 4 hours. Great program.
The DVD works fine except for1 thing:
I could not figure out how to connect "Next" and "Previous" in my Submenu for choosing clips.
So I just deleted these functions (!)
Looking forward to next project but I would like to use these 2 functions!
Thanks in advance!
Great forums in Adobe with Great People!

Thank you !
I thought it was to go to Next clip and previous clip. Not very good thinking.....
Now I understand!
Thanks again!

How to connect Java and Microsoft SQL Server 2000

hi,
could anyone please teach me how to connect Java and SQL Sever 2000?? if possible could you guys provide me with an example??? i could hardly find any relevant resources about it...
Thanks ~!

thanks for the information...
by the way hv any working module on it?? i'm new to
both Java and Microsoft SQL Server... Thanks againFirst things first... you should read this:
http://java.sun.com/docs/books/tutorial/jdbc/
This is microsofts official JDBC Driver: http://www.microsoft.com/sql/downloads/jdbcregister.asp
Install it and the documentation has some usage examples

My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

Hi HARISH INDIA,
That is not good but lets see if we can get it back to life. If you can, see if you can put your iPhone into recovery mode and then use iTunes to restore it. If you can get it to restore, it will erase everything off your iPhone. If you have a back up in iTunes or iCloud then you can put that on after the restore is complete. Take a look at the article below for more information.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Take it easy,
-Norm G.

HT1386 how do i sync my 4s phone with my home email

how do i sync my 4s phone with my home email

You don;t sync it with your home e-mail.
You can set up your e-mail account on the iphone and it will retrieve e-mail from your server just like your computer does.
iPhone User Guide (For iOS 5.1 Software)

How to connect an non-hana-ewm with an Hana-ECC and vice versa

Hello,
for our migration project planning I am wondering how to connect EWM on SAP with ECC on Hana and vice versa.
As it is, both systems are (productive) on non - hana with actual SAP-Release and have to be migrated.
The background of my question: we may be not able do the "big bang" thing to migrate ERP ECC607 and EWM (with special Add-Ons) at one point to Hana (DMO) and therefore may need an interim solution. I checked ETL and LTS as "connectors" but they - from my point of view - are one-way solutions from EWM to ECC/Hana -not bidirectional.I Found some questions concerning the same theme in the net but no solution at all till now..
How about BODS ? (Didnt work with it yet)
Best regards,
Ronald

Great. So I have to either install OS X, or buy a new mcahine. Can OS X run on a G3 without grinding to a halt?
By the way, I cannot get the iPod to even mount when connected via firewire. The USB/firewire PCMCIA card does not have drivers for OS 9. I thought that this support was built into OS 9. The USB port works (although the iPod will not mount when connected via USB either). Any ideas?
Thanks

How to connect Photosmart C4795 to Wireless Network - Mac OSX 10.8.4

I am desperately confused here! When I bought the printer 2-ish years ago I was able to set it up and have it connected to my network no problem. Since then I have moved and updated my OS to Mountain Lion and lost my installation CD. As of now, this is where things stand.
When I turned the printer on and connected it to my iMac via the USB cable, the computer found it and installed it with no issues. I can print with no issues when the USB cable is plugged in.
Using the printers built in display, I have run the HP Network Configuration and the Wireless Network Test. The printer can see my network, but it won't connect to it. I have no bloody idea where I need to go to enter my network password so the printer can get online.
I've manually downloaded the HP Driver found at http://support.apple.com/kb/DL907 and that put the HP Utility on my computer (which was already there) but I don't see any place in the utility software that would let me enter my network password or even configure network settings for the printer.
My router is an Apple Airport Extreme, and the firmware is up to date. Everything on my computer seems to be up to date. I just cannot for the life of me figure out how to get this thing online. Any help would be greatly appreciated =)

Yup, there is no way to install your printer using OS X 10.8, sorry.
However, there are alternatives. Here is the easiest way:
1. On the front of the printer: Setup [Scan] > Wireless > Restore Defaults.
2. In the same Wireless menu, start WPS Pushbutton.
3. On your Mac go to Applications > Utilities > Airport Utility. Choose your Airport and click Edit.
4. In the menu bar at the top of your screen go to Base Station > Add WPS Printer.
5. Choose the FIrst Attempt mode, then Continue.
Now your printer should be connected to your wireless network. Next, go to System Prefs > Print & Scan, click the '+' sign to add your printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to connect WRT54GX and WAP54G

Hi,
I am using WRT54GX router and WAP54G access point in same floor. Could you please let me know how to connect access point with router? Kindly provide setting.
Thanks!
Gaurav

Hi, first connect one of your Pc to the router and log into the setup page of the router with http://192.168.1.1 . The username is blank and the password is admin. Under the wireless tab make a note of the ssid, wireless channel and under the wireless security page also make a note of the wep keys if you have provided any. Then click on the status tab and under the status tab you can click on the Local Network and note the Mac Address mentioned on this screen You can then connect the wap54g to the router and log into the setup page o the access point by http://192.168.1.245 . The username is blank and the password is admin. On the wireless screen you can change the ssid, the channel and the wep encryption accordingly.
Then on the setup screen you can click on the AP Mode and select the mode as Wireless Repeater an punch the Mac Address and then click on save settings. You can then unplug the access point from the router in order to get it working wirelessly.

How to connect to dsl airport extreme with built in modem

Hello everybody,
while we were tiding our cellar, i found an old airport extreme (a1034) with a built in modem, but i aint able to connect to my isp.
I looked throug the manual, but i didnt got answers there (maybe because of my poor english) . Is there a tutorial out there which tells me
how to connect to my isp?
Regards Floh
PS: again sorry for my poor english

If you try to set up the new AirPort Extreme with AirPort Utility 5.6.1, you will receive a notice that you need a more up to date version of AirPort Utility.
Nevertheless, AP 5.6.1 will allow you to set up the basics....wireless network name, password, etc.
It will appear that you can change other settings that are not found in more recent versions of AirPort Utility, but if you go in and check using a newer version of AirPort Utility, you will find that the settings that you thought you had made have not "stuck".
For example, you want to change the Radio Mode on the new Extreme and not use the Automatic setting. AP 5.6.1 will appear to let you do this. But, if you check the setting using a more recent version of AirPort Utility you will see that the setting is still set at "Automatic".
So, the bottom line here is that unless the newer version of AirPort Utility has the specific setting that you want to change, you will not be able to make that change.
Is there ANY chance, to set up my new "towers" with more
options, than the current Airport Utilities do offer?
Unfortunately, no.

Poor connection speed and intermittent drops with WRT160Nv2

In January 2009 I purchased a Linksys WRT160N v2. At the time I did not have any wireless devices to connect to it other than a Nintendo Wii which has no problems. In July I purchased a Dell Laptop with an Intel 5100 AGN wireless card and have since had trouble getting consistent speed on my wireless connection.
Around the first of November I upgraded the firmware on my router to v2.0.03 and installed the latest Intel 5100 driver available from Dell.
On November 3rd I participated in a web chat session with Linksys Support and was able to increase my connection speed to 121Mbps. This was short-lived however.
On November 24th I sent an email similar to this post to both Linksys Support and Intel support and have not received a response back from either as of yet.
On 12/5/2009, after reading similar posts in the support forums, I followed some tips suggested by forum users:
1) I hard reset the router by holding the reset button in for between 30 and 60 seconds.
2) I hard power cycled the router by unplugging it for bewteen 30 and 60 seconds.
3) I selected manual wireless configuration and assigned a unique SSID.
4) I selected WPA2-Personal security and assigned a 9-character password.
5) I set Radio Band Frequency to "Standard 20 MHz" and the channel to 11.
6) Beacon Interval to 50
7) Frag and RTS Thresholds to 2304.
8) MTU to 1350.
9) Power cycled the router and restored a few settings that were lost.
10) Connected the laptop on wireless.
The laptop was in the same room as the router, about 10 feet away unobstructed. There was full signal strength, but the connection speed would fluctuate between 43Mbps and 72Mbps. There are no other devices besides the laptop connected on the wireless, and only 2 desktops on wired connections.
Detectable by my laptop are only 5 other WPA2 networks, 3 WEP, and 2 unsecured. None of them are close enough to have signal strength of more than 3 bars.
We are giving our son a netbook for Christmas and I hope to have resolved all of these issues before then.
What other settings changes can be made to increase my connection speed over 100Mbps and stop the intermittent signal drops??
Additional Details:
Laptop: Dell Inspiron 1545 (A10 BIOS)
Operating System: Windows 7 Home Premium x64
Router: Linksys by Cisco WRT160Nv2 Firmware Version: v2.0.03
Wireless Card: Intel WiFi Link AGN 5100
Dell / Intel Driver: Version 12.4.1.11 (5/14/2009)
Any help is very much appreciated!
Thanks.

Downgrade your routers firmware to the last known working version by going here. Now give it a try.

How to Connect Wii and Xbox360 wirelessly with SBC Home Portal

Similar Messages

Maybe you are looking for