How to connect X-Fi to surround system with tulip audio

I have Sound Blaster X-Fi and 5. surround stereo system with surround tulip in (this system separates audio channels itself). SB X-Fi have 3 mini-jack outs so it also separates audio channels. How I can connect my X-Fi to this system with one mini-jack->tulip cable, so it plays all 5. channels (now it plays only front channel)? I think that there is some option to send all audio-signal to one mini-jack out of my sound blaster (so stereo systems separtes it itself after), but I can't find it. Any ideas?

It think the Tulip you talking about is a standert RCA Female jack.
This is a likely a Digital Jack so what you need to do is hook it up to your digital out on your X-Fi. you can go to RadioShack and find a converter to change the Headphone jack into a RCA jack..Message Edited by Tannah on 07-23-2006 03:58 AM

Similar Messages

How to connect one ECC 6.0 system to two BW ssytems.

Hello all,
I am trying to connect one ECC 6.0 systems to two different BW systems. The BW systems have two different logic names.
I tried to find an answer in the threads , but could not able to find the steps. they were talking about the notes which fixes for the deltas. but I am not even able to connect the systems at all to implement that notes.
Please give me the steps how to connect to an another BW2 system. The connection between ECC and BW1 ia working fine.
Thanks,

The error message is .
Source system cannot use any of the proposed connection names
Message no. RSAR362
Diagnosis
Every connection to a source system is named using a unique two-digit identifier. Source system LOGTST100 does not accept any of the proposed values.
The last proposed value was BB.
System Response
Source system has not been connected.
Procedure
If you want to recreate the source system from BI information, then you can only use a single value, namely BB, because the connection already has this name in BI.
Delete the existing connections in the source system or contact a BI consultant.

How many people can be on the system with a 512 K connection in BPC 7 MS

Hi,
It appears that BPC uses a large piece of the band width and more than one computer and user with a 512 K connection using BPC will not work.How many people can be on the system with a 512 K connection? -BPC 7 ms version.
Thx
PLN

I would like to precise more things regarding the network.
I did a case study for one customer and really to have good performances with SAP BPC client the network required the follow:
Bandwitdth 1024kb/s
Latency smaller than 200 ms between BPC client and BPC server
Otherwise the users will experience problems:
1. IBandwitdh < 1024Kb/s then to download 80 MB or more (templates + dimensions) will require a lot of time and that's means the login time will be very slow every time when a dimension is changed or security is process
2. When an report is executed (a medium report not very complex report) around 100 mesage are send between bpc client and server. So if latency > 200 ms than a simple calculation is saying just into network it will be lost 200 * 100 ms = 20 s.
So for a report which normally is taking 5 - 10 second it will take 30s or even more into client with latency bigger than 200 ms.
Regards
Sorin Radulescu

How to connect my cannon mx470 series printer with bluetooth to my mini mac?

how to connect my cannon mx470 series printer with Bluetooth to my mini mac

Does the printer actually support BlueTooth? If the printer is wireless, then most likely it uses Wi-Fi. Did you read the user guide that came with it? Or contact Canon tech support at their website.

How to connect my CQ60 notebook to TV with "HDMI to RCA" cable?

Hi there
I have a Compaq Presario CQ60-213TU notebook computer which has an HDMI port. I bought an "HDMI to 3RCA+VGA" cable from ebay. I was able to connect my laptop to the extenal display with VGA, but when i tried to connect my laptop to my non HD tv it did not connect.
Has anyone got a solution how to connect my laptop to my tv with "HDMI to 3RCA" cable.
Please reply asap.
Thanks

you said it did not connect. what do you mean. what was displayed? what input did you have the tv on? need more info than "did not connect"
click Kudos to say thanks if I helped

Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

I believe you naeed the Apple ADC to DVI adapter.

How to connect sql server 2008 r2 sp2 with vs2013 ultimate?

how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?

Hi Shahzad,
>>how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?
Based on your issue, if you wan to connect the sql server 2008 r2 sp2 from VS2013 IDE. I suggest you can try the Ammar and darnold924's suggestion to check your issue.
In addition, I suggest you can also refer the following steps to connect the sql server 2008 r2 sp2 with visual studio 2013 ultimate.
Step1: I suggest you can go to VIEW->SQL Server Object Explorer->Right click SQL Server->Add SQL Server.
Step2: After you connect the SQL Server 2008 r2 sp2 fine, I suggest you can go to VIEW->Server Explorer-> right click the Data Connection->Add Connection.
And then you can create the connect string in the Add Connection dialog box.
Hope it help you!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to read some images from file system with webdynpro for abap?

Hi,experts,
I want to finish webdynpro for abap program to read some photos from file system. I may make MIMES in the webdynpro component and create photos in the MIMES, but my boss doesn't agree with me using this way. He wish me read these photos from file system.
How to read some images from file system with webdynpro for abap?
Thanks a lot!

Hello Tao,
The parameter
icm/HTTP/file_access_<xx>
may help you to access the pictures without any db-access.
The following two links may help you to understand the other possibilities as well.
The threads are covering BSP, but it should be useful for WebDynpro as well.
/people/mark.finnern/blog/2003/09/23/bsp-programming-handling-of-non-html-documents
http://help.sap.com/saphelp_sm40/helpdata/de/c4/87153a1a5b4c2de10000000a114084/content.htm
Best regards
Christian

How to connect to Windows 2008 VPN server with certificate support

Unfortunatelly if I select any Windows 2008 server compatible protocol (PPTP, L2TP) I cannot select PKI certificate, its only available for Cisco VPN. Yet my company has 1000 laptops and utilizing Windows 2008 Server for VPN (Cisco is too expensive and unnecessary because VPN is part of Windows Server). PKI certificate is required for connection security.
Any plans to enable certificates for PPTP or L2TP in 2.1 firmware? Even better would be to add SSTP protocol with certificate support, because it takes only one standard TCP connection (https) per user (uses least possible NAT resources for heavy loaded NATed WiFi spots). Also in some public places https is the only option to connect as PPTP and L2TP are filtered.

Hi Shahzad,
>>how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?
Based on your issue, if you wan to connect the sql server 2008 r2 sp2 from VS2013 IDE. I suggest you can try the Ammar and darnold924's suggestion to check your issue.
In addition, I suggest you can also refer the following steps to connect the sql server 2008 r2 sp2 with visual studio 2013 ultimate.
Step1: I suggest you can go to VIEW->SQL Server Object Explorer->Right click SQL Server->Add SQL Server.
Step2: After you connect the SQL Server 2008 r2 sp2 fine, I suggest you can go to VIEW->Server Explorer-> right click the Data Connection->Add Connection.
And then you can create the connect string in the Add Connection dialog box.
Hope it help you!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to plug a 5.1 surround system on a imac

Hello,
i have a mac 24' and a medion 5.1 surround system.
the problem is that exually i don't now how to plug in in my mac?!
i'v red about the Griffin Firewave (http://www.griffintechnology.com/products/firewave) but they say it doesn't work anymore with Snow Leopard.
Does anyone have a product to solve this problem?
Thanks for any solutions!
(sorry for my bad English, I'm from the netherlands you know)

If your surround system has an optical input, you can just plug it into the audio out socket (you will need a converter lead which has a mini-TOSlink plug at the computer end) - the socket is dual function, giving analogue audio when a 3.5mm jack is plugged in and digital out when a mini-TOSlink jack is plugged in. You will only get stereo out unless you find a program - such as certain games - which can provide a Dolby Digital 5.1 output.
If your surround system has only analogue inputs you will need a converter, probably FireWire: a Google search should throw some up but you will need to check for compatibility before parting with any money.

How to connect iPod nano to speaker system

How to connect iPod nano to a stereo amplifier?

Hello Secullinanjr
Try using an auxiliary cable to connect it to your stereo. Check out the article below for more information and another alternative.
Connecting iPod to your home or car stereo auxiliary input using the headphone jack
http://support.apple.com/kb/ht2167
Regards,
-Norm G.

How to connect to a Learning Management System (LMS)

Are there any tutorials available on how to connect an LMS with Captivate or a walkthrough someone could offer me?

As Lilybiri states, Captivate is SCORM-compliant, meaning it can publish a SCORM-compliant file. Per the SCORM spec, any SCORM-compliant content must be uploaded to a SCORM-compliant LMS as a .zip file (technically, a '.pif' file, but .zip is the most common).
Now, the actual process your LMS requires to upload a SCORM package completely depends on the LMS, so refer to your LMS documentation/support on how to do that.
Within CP itself, also as Lilybiri pointed out, you need to setup the preferences properly - selecting SCORM (or AICC if that's you and your LMS preference), the version, the various manifest requirements, and the various scoring/reporting options. That in itself is an entire discusion - do refer to the Captivate help on those sections first.
HTH
Erik

How to connect macbook pro to panasonic tv with hdmi cable

How to connect macbook pro to panasonic hd tv with hdmi cable

Hi m,
It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
This is if your MBP is from April 2010 or newer:
http://support.apple.com/kb/HT4241
First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

Help how to connecting Oracle SQL Developer 3.0 with Oracle Database 11g

Hello,
I'm new in oracle developer yesterday i setup in my laptop database 11g the last version (11.2.0.1.0), well i follow steps still i got succeed to install, and i got my local host URL and i test my user name and password work very well, my problem now is i try to connect database 11g using Oracle SQL Developer 3.0 (3.0.04.34) but always filed and with my little experience i don't know where the wrong. as i said i test database after finish install is work fine the my URL is https://Ahmed-HP:1158/em and i test my username and password that i already set before is enter normal in my local database, please i need help to know how i connect database with Oracle SQL Developer 3.0 (3.0.04.34).
Thanks,

885173 wrote:
EdStevens, thanks for your quick answer, sorry for my explain was doesn't clear, i open oracle sql developer and choose new connection i set connection name system_orcl username:system password:*i set my password that i create when i setup database*
-Now the link that i got after finish install database is https://Ahmed-HP:1158/em so i have question about this point Hostname and port if the link to access database is this https://Ahmed-HP:1158/em so this mean i typing at Hostname:localhost and port:1158 ?
because the message when i test connection always is filed and I'm sure i typing username and password and SID:orcl as i set when install database.port 1158 is what the dbcontrol (Oracle Enterprise Manager) is listening on. OEM is NOT the database. As far as the database is concerned, OEM is "just another client".
Actually, the database doesn't listen for requests on any port. There is another process, the "listener" that listens for requests to connect to the database. Typically, it listens on port 1521. You should have a tnsnames.ora file set up to resolve a connection request to the correct host. You can read more on this at http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/

Create a Connection on TREX for 2 systems with same SID

Hello world,
Here is my case,
We have a PRO systems With SID=PRO On Host= production , and a Sandbox system with also SID=PRO On Host=SANDBOX
now i need to create a connection in TREX in parallel so when i add the 2nd one it just edits the 1st one that i have already made
So is it possible to create 2 connection of same SID but diffrent Hosts In parallel?
If Yes how ?
Thanks In Advance...
Ahmed Salam

Hi Ahmed,
it could be possible from the TREX perspective , however such configuration isn't supported . The reason for this is that the SAP applications create indexes using the ABAP system ID and client as a part of the index names (f.e. esh:e10002~e10002~acc_sid~sid). As it's not possible to create an index with the same name 2nd time, you will not be able to use the TREX instance with two systems with same SID.
Best regards,
Mikhail

How to connect X-Fi to surround system with tulip audio

Similar Messages

Maybe you are looking for