How to connect xbox 3

Hi! In my pc I have an X-fi extreme music card and an inspire T7900 speaker package. I also have an xbox 360. My question is, is it possible to connect my xbox 360 to my pc so I can hear the sound through my inspire speaker package. I have my xbox connect to my tv with Hi Def AV cable on this there is a connection for an optical sound cable. I have tried connecting this to the digital I/O socket on my sound card but I get no sound.Please help me someone because this is driving me nuts!

As with most things it all depends, but I also live in a remote location so hopefully the following will help,
Remote locations tend to suffer from two things, firstly long lines to the echange and secondly a poorer quality of line repair (since it costs more due to the length and percentage underground).
I do not habe a home hub since my BT service started way before such things but there are a variety of routers that are better it seems for longer lines.
The BT business hub is one such thing, can be purchased from ebay for under £20 and is meant to work well. I have one but have not tried it yet.
If you need wirelss N then the Billion Bipac 7800N is a good router but costs £118 (broadbandbuyer.co.uk).
Personally I use a Linksys WAG354G which you can get second hand fro ebay for £5 or less normally.
The Netgear DG834G is also meant to be good, but this tends to be the V4 more then the V5 or upwards models.
Apart from that, use a proper filters faceplate and shielded ADSL cable and that helps a little as well. adslnation.co.uk do a good quality item for both.
If my post was helpful then please click on the Ratings star on the left-hand side If the the reply answers your question fully then please select ’Mark as Accepted Solution’

Similar Messages

  • How to connect xbox 360 to the newest iMac 21'5?

    How to connect xbox 360 to the newest iMac 21'5?

    So if I connect my Xbox thru adapter like that one ( http://store.apple.com/us/product/H3983ZM/A ). It will work?

  • How to connect Xbox to Airport Express

    I currently have the Xbox connect to the Airport Express (ethernet).
    The cable modem is connect to the Airport Extreme in another room.
    The internet is WPA protect.
    The Airport Extreme is password protected.
    Is this a possible set up? Also, can you provide directions of how to enter all the correct setting information on the Xbox? Do I need to enter anything on the Airport?

    Looks like this thread died. I have a similar situation. Got a Time Capsule connected to a modem, and an older airport express in another room I've been using to stream music. The wireless network is WPA password protected. My son just got an Xbox 360. Just fooling around, I connected it to the airport express, but wasn't able to see the network. I have the airport express set to "join network." Do I have to set up a WDS? If so, do I have to change settings on the Time Capsule (to main base in a WDS)? I'd rather not set up a WDS, as I'd rather not mess with the Time Capsule, and I've heard that WDS cuts down on the signal strength of the wireless network. Any advice is appreciated. Thanks in advance.

  • How to connect HP TouchPad Wireless Keyboard to XBox One?

    How can i connect a HP TouchPad Wireless Keyboard  to XBox One?

    Hi, Double post, pleae use:    http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/How-to-connect-HP-TouchPad-Wireless-Keyboard-to-XBox-One/m-p/5139082 Thanks.

  • How can i connect xbox to time capsule?

    Hi, I am (whilst being shouted at by my 11 year old son), trying to connect Xbox 360 to a time capsule. I tried last year without success, and afer chatting with a bloke yesterday in an Apple store, I thought I would try again. No luck. I've tried inputting every set of numbers and address I can find, but the Xbox, just will not connect. Is there a simple set of instructions that will do this? The forums I've looked at have information that is beyond me. The time capsule is connected to a Virgin media modem via ethernet. The Xbox Live connects via ethernet cable to modem just fine. I would just like it to work wirelessly so I don't have to keep plugging the cable back into the time capsule and rebooting. As an alternative is there a piece of kit that would let both the Xbox and the time capsule remain wired up to the modem? There only seems to be one connector however. Many thanks in advance.

    Connect an Ethernet cable from a LAN <-> port on the Verizon gateway to the WAN port (circle of dots icon) on the Time Capsule.
    Then, temporarily connect a spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule to help AirPort Utility "see" the Time Capsule. Once you have the Time Capsule configured and updated with new settings, you can remove the spare Ethernet cable.
    If that is not successful, you will need to perform a Factory Default Reset on the Time Capsule as follows:
    Pull the power plug on the Time Capsule
    Wait 4-5 minutes
    Hold in the reset button on the Time Capsule and while you continue to hold it in, plug the power back to the Time Capsule
    Keep holding the reset button for 8-10 seconds before you release it
    Wait 30-40 seconds for the Time Capsule to restart to a slow, blinking amber light
    Restart your Mac, then open AirPort Utility to configure the Time Capsule

  • Can I connect XBox 360 to imac

    how can I fnd out how to connect the xbox 360 to Imac 27 inch

    If you haven't yet check to the right under More Like This. Looks like lots of posts there.

  • How to connect my friends apple notebook through video call

    HOW TO CONNECT TO A FRIEND WHO IS USING APPLE NOTEBOOK FROM MY IMAC SUGGEST ME WAITING FOR A SOLUTION FROM APPLE TEAM SUPPORT

    Hi,
    Typing in all upper case is regarded and shouting here.
    Presumably as you have posted in the OS X 10.7.x (Lion) area you are running this version of the OS on your iMac.
    This will have iChat 6 on it.
    This can use AIM, Jabber and Yahoo IDs within the app.
    Apple IDS ending in @mac.com and iCloud issued @me.com and @icloud.com are also Valid AIM Screen Names.
    If you use Googlemail and Enable "talk" in the products there you can then use your Google Mail ID as a Jabber ID (although it has it's own Add Account option in iChat)
    Facebook has an option to Enable "Chat" which will give you a Chat ID variant on your name there and this can be used in iChat (or Messages) as a Jabber ID.
    The Yahoo Account will only do Text chats.
    It also has to be an actual ID registered at Yahoo.
    Chats are then AIM to AIM or Jabber to Jabber or Yahoo to Yahoo.
    So your Buddy will also need a suitable ID or Screen Name  for the relevant service.
    8:16 pm      Sunday; January 19, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

    how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

    You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
    Check your MacBook Pro model year against the list in this Apple tech note:
    About Mini DisplayPort to HDMI adapters
    Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

  • I need to know how to connect my macbook to the tv

    I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.

    Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
    Luck
    E

  • How to connect a Sony Bravia TV to the internet through your Airport network

    Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
    My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
    Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
    The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

    I have now had a detailed reply from Sony Europe and the way to do this is to:
    1.       Press Home on the TV Setup
    2.       Use the right and left arrow to select Setting.
    3.       Use the up and down to select Network, press Enter.
    4.       Select Network Setup.
    5.       Select Wireless setup.
    6.       Select Scan
    7.       Select your network
    8.       A new screen will appear asking for entering the security key.
    9.       Enter your WPA2 key.
    10.   Select Enter.
    11.   It will take you back to the same screen asking for entering the
    security key.
    12.   Press the right arrow.
    13.   Select Auto.
    14.   Press the right arrow.
    15.   Select Save and connect.
    These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

  • How to connect my Mac book Pro to a TV

    How to connect my MacBook Pro to the TV using HDTV cable

    I am assuming your TV has HDMI connector.
    In that case, if your MacBook is the retina-one, you have HDMI connector there too. All you need is HDMI cable to connect teh two.
    If your MacBook has thunderbolt port instead, you need Mini DisplayPort to HDMI adapter and HDMI cable.
    Hope this makes sense.

  • How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

    How to connect old aiport express to my new Airport Extreme?
    I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
    I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
    I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
    I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
    My Ipad says "base station e5713b cannot be configured."
    I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
    My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
    Sigve

    Hi
    Thanks for Swift reply.
    Yep - I in fact have two A1088 and one A1264
    I actually bought the new router because the Jensen
    router always lost connection to the Airport Express after some hours or days. I
    always needed to restart my Jensen to play music and that was driving my wife
    mad. The hope was that the Extreme should fix this. Both A1088 have been set up
    to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
    Are the A1088 now useless?
    The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
    Please advise
    Regards
    Sigve

  • How to connect my iPhone and iPad to Apple TV

    How to connect my iPhone and iPad to Apple TV

    Connect the iPad and Apple TV to the same WiFi network. Double Tab the home button on the iPad and then swipe your recently used apps from left to right until you see the mirroring icon which looks like a retangle with an up arrow. Tab that icon until you see the Apple TV. Tab Apple TV and slide the slider to the ON position. You should now see your iPad screen on the TV the Apple TV is connected to.

  • How to connect my ipod to itunes if my ipod is disabled and my top button is broken

    how to connect my ipod to itunes if my ipod is disabled and my top button is broken

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?

    How to connect my perfectly-working 20-year-old Apple Personal Laserwriter 320 to my iMac running Mountain Lion?
              Thank you, Morty S.

    I have a perfectly-working LW 4/600 with exactly the same issue. They use localtalk - a long obsolete network connection, that doesn't connect to modern networks, and appletalk as the comm protocol.
    I think the only choice you have is to use an old powerPC Mac as print server. You tell me which old Mac you have, with a localtalk connector, or that runs OS X 10.4 or earlier (so it speaks appletalk), and I'll tell you how I've done it for the past 11 years or so.
    Right now I use a G4 running 10.4.11, plus an etherMac ethernet to localtalk adapter.
    Before, I used a PMac 6100 running LPD server software.

Maybe you are looking for

  • InDesign & Photoshop question

    I use InDesign CS6, I was told that if i hold the ALT key down and double click on a picture it will be opened in Photoshop. When I do it, it opens in Windows Photo Viewer. How do i get it to open in Ps?

  • Reversal of posted ED revaluation

    Hi all, I have a question regarding wrong posting of excise duty revaluation. My customer posted double FI and excise document of revaluation after change of excise duty exchange rate and we need to reverse at least one of double documents but within

  • Is it possible to purchase songs in mp3 format or to change them to MP3 after purchase

    Is it possible to purchase songs from the istore in the MP3 format?  or can I convert them to MP3 after purchase?

  • 1099 Misc IRS file

    Hi Team , After implementing the SAP Note 1666672 for US legal changes 2011, In 1099 Misc IRS file house number is missing . Could you please help on this .. Thank You Jagadeshwar.G 91-9676486129

  • How to use Currency Conversion

    Hi. Caf.core has a service called CurrencyConversion. How to use that service in java webdynpro since I could'nt find any interface or class for it. Regards Bala