How to Connection CF10 to Apache on Separate Linux boxes

Is there documentation on this? We have CF10 installed on one Linux server and would like to connect it to Apache installed on a second Linux box.

Hi,
I have done this in Windows and Linux both for CF 9, but you can follow the same for ColdFusion 10. The place where we have to enter the IP address, put in the IP address of Remote server where you have installed ColdFusion 10.
In Web Server machine create the Identical directory as /opt/ColdFusion10/config/wsconfig and then place all the files,
Manual Connector for Apache: http://helpx.adobe.com/coldfusion/kb/coldfusion10-apache-manual-connector-configuration.ht ml
In ColdFusion server machine, you don't have to create this connector directory.
Please check this article, this is for CF 9.
http://helpx.adobe.com/coldfusion/kb/manually-configure-web-server-connector.html
Hope this helps.
Regards,
Priyank

Similar Messages

How to connect Oracle 8.0.5 for Linux to Tuxedo

How to connect Oracle 8.0.5 for Linux to Tuxedo?
How to config Tuxedo RM file and setting.

Thomas Drolshagen (guest) wrote:
: Oracle 8.0.5. Installation on S.u.S.E. Linux 5.3
: =================================================
: After strugling for 3 weekends with the installation of Oracle
: 8.0.5. on a
: S.u.S.E. 5.3 distribution here are the installation steps that
: worked for me.
I have tried to install Oracle on SuSE 5.2. I almost complted the
installation, but kept getting a failure on installing the
database. The last entry in the install.log is:
Leaving trace.ins- Entering Make Dependent section.
- Entering do_relink==false section.
- Leaving Make dependent section.
- Entering database actions section.
Deciding to start again from scratch, I tried deleting all files
and begining again, but now I get a different error running
orainst. The installer keeps responding that 'file x already
exists'. The name of the file changes each time I run it, and no
file of that name exists. I have tried deleting the temp
directories, as well as dropping them and recreating them
elsewhere (desperation!), but I canot stop this from happening:
An operating system error occurred while trying to spawn
'/orasys/app/oracle/product/8.0.5/bin/otrccref' while
redirecting
output to '^ @^'. (File exists.) Would you like to retry
the
operation, ignore the error, or allow the error to be
processed by
the Installer?
Does anyone have any ideas??
null

How to connect oracle 9i database in PHP (Linux)

I found that I cannot connect oracle 9i thru PHP in Linux, where can I get the necessary information and samples to setup this connection?

Hi,
You can find information on http://www.php.net .
Anyway, you have to configure php.ini with oci8 library.
Paolo

How to connect to oracle in vpn in linux?

Dear all,
I have to connect to oracle database between two linux server in VPN.
Plz help.

check this , seems to be similar
ERROR ORA-12170: TNS:Connect timeout occurred
Re: Inconsistent ora-12170 problems on 10g.

Connect Exception trying to connect to rmi registry on a Linux box

I have prepared the Sun tutroial for RMI, implementing the remote method on a Linux box, and a client on the XP box. Try as I may though, the XP client always comes back with a Connect exception indicating it cannot connect to 127.0.0.1. I am though trying to connect to 192.168.0.4
The firewalls on both machines are open on port 1099, and if I connect from the client with telnet to port 1099 on the server something happens, (well the CMD box screen goes blank, and I get a cursor).
I'm struggling here, being both a Java RMI newbie, and likewise for Linux. I have seen suggestions that the hosts files may need modifying on both machines, but I am not sure what I might need to do.
Any guidance would be appreciated. Thanks in anticipation
P.S. I have posted this previously, but it seems to have expired. So, sorry for repitition, but I don't seem to be alone with this kind of problem.

I have made some progress if you can call it that. Doing what you (ejp) suggested with regards to the hostname, and the following helped.
Elsewhere on these forums I read of a problem where the rmiregistry was not being invoked by the JDK version. I forced this to happen by using an explicit path, then tested my client.
My client now starts, and does not crash with an exception immediately, instead it runs slowly, and then stops with a NoRouteToHostException, and now it is referncing the correct IP address. I am not sure how to resolve the cause of this exception. Again I have read elsewhere about IPTABLES being the cause of this exception, but I don't know what these are, or how to configure them.
Can someone guide me a bit more please.
Thanks

How to connect Oracle 10g from OBIEE on Linux?

- OBIEE 10.1.3.4.0 is running on Cent 5 Linux M1 (*64* bit). My Oracle database is running another similar machine M2.
- I installed oracle 64 bit client on M1 but could not connect to run the report, connection issue. Even nqcmd didn't helped.
- I guess it was because OBIEE is *32* bit application and hence need 32 bit client.
- I tried installing Oracle 32 bit Linux client on M1 but installation fails with some dependency (Not sure if we can install 32 bit client on 64 bit machine)
Q1 - Any suggestion at this point?
Q2 - Is there any way we could connect OBIEE to Oracle via ODBC drivers. I could not found any odbc driver/so file when I wan installed 64 bit client. Any suggestion for this?
Thanks in Advance!

The computer running XE server does not need a client installed.
If you are trying to connect from another computer, install the XE client and create file C:\XEClient\NETWORK\ADMIN\TNSNAMES.ORA with the following contents (replace ip_address as appropriate):
XE =
    (DESCRIPTION =
       (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = ip_address)(PORT = 1521))
       (CONNECT_DATA =
          (SERVICE_NAME = XE)
{code}Test with
{code:java}
sqlplus SYSTEM/password@XE
{code}
Regards,
Georger
wrote:user_7000018
Hi ,
i am using oracle 10g express edition. i installed oracle 10 xe server it is working fine but how can i connect oracle 10g xe client to this server becouse there is no net configuaration nad Migration tools and also net configuation Assistant . can you explain
Regards,
Dharmendra

How to connect my ipod to a wifi live box (france)

the network is found they ask me a code
I type my wep code and it does not work
to you know the solution
thanks michel

hi Michel,
Do not forget that you need to put the Livebox in "association" mode otherwise you will not succeed in connecting to your wifi network. (sur les Livebox Inventel, il faut appuyer sur le bouton "1" se trouvant à l'arrière. sur les Livebox Sagem, c'est un bouton à enfoncer près de la prise d'alimentation). The Livebox remains in "association" mode for 10 minutes, this gives you enough time to enter your WEP key..
Plus d'info sur le mode d'emploi de ta Livebox.
Bye,
/Phil

How to connect my TC behind a "numericable la Box" ?

I had my box connected to my iMac. I had a "box" from Numericable which includes Wi-Fi. I have been told in my apple store to disconnect my TC from the Mac and to connect it to the Box. Wi-fi is working with the TC, but it is not found for using the Time Machine to save my Mac.

The TC is which model??
If it was plugged into the iMac and working over ethernet that is far superior to using it plugged into the main router.. there is absolutely nothing wrong with continuing with the setup you had.. why are you trying to fix it??
Plug the WAN port TC into the existing router LAN port by ethernet.
Reset the TC to factory.. no backups will be lost.. but this is essential to change over setups.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Redo the setup via the airport utility using all short names.. no spaces and pure alphanumeric. NOT apple names suggested by the setup wizard.
When finished check that the TC is bridged.. if you still have issues please post a screenshot of the summary page ..
This is summary. Click edit and then screenshots of the internet and network tab in the TC.

How to find the smtp server on a linux box?

Hello,
I am trying to set up Notification Methods in OEM and I need to know the SMTP server and port. Which command can I use on Linux to find this information? Thank you in advance.

Netstat is not necessarily the right tool for this task.
Sorry, but "netstat -a | grep 25" will not be useful. For example:
netstat -a | grep 25
unix 2      [ ]         DGRAM                    128925
unix 3      [ ]         STREAM     CONNECTED     11825 Better grep for "smtp". For example:
netstat -a | grep smtp
tcp        0      0 vm015.example.com:smtp      *:*                         LISTEN
lsof is a better tool, but requires "root" or superuser privileges. For instance:
lsof -i :smtp
COMMAND   PID USER   FD   TYPE DEVICE SIZE NODE NAME
sendmail 3098 root    4u IPv4 13077       TCP vm015.example.com:smtp (LISTEN)Keep in mind however that processing and routing email in is usually a more complex task and involves either to know firewall and mail gateway configurations, or ask your mail administrator. The local mail server may not be permitted to relay email to the company wide smtp gateway depending on routing policies.

How to connect any scanner and cash draw box in retail outlets

we have JHS 10g oem copy.how can connect with barcode scanner and cash draw box, print invoice over the JHS? is it any pre defined ADF application available in Oracle for retails?

we have been developing ADF application,we pause development? due to the connection with cashdraw devices( Point of Sale Devices) over the JSF pages! this is our core issue! how can achieve this goal?
we have 40+ outlets with CashDrawer with bar-code scanner! those devices should communicate with our ADF application!
either any such type of devices are compatible with ADF application.please suggest,we can buy.

How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

How to connect a new 27" LED Cinema Display to an older Mac Mini?

I bought a 27" LED Cinema Display (no Thunderbolt) but don't know how to connect it to my wife's older Mac Mini. I presume the Atlona adaptor is the solution, but I haven't bougt one yet.
robbert keegel

The cord attached to the display splits into a Mini DisplayPort, USB, and a MagSafe connector (for powering a laptop).
There is a separate connector on the back of the display for the AC power cord.
<http://store.storeimages.cdn-apple.com/2316/as-images.apple.com/is/image/AppleIn c/MC007_AV1?wid=326&hei=326&fmt=jpeg&qlt=95&op_sharpen=0&resMode=bicub&op_usm=0. 5,0.5,0,0&iccEmbed=0&layer=comp>
<http://store.apple.com/us/product/MC007LL/A>
"What’s in the Box
LED Cinema Display
AC power cord
Printed documentation"

CF10 64bit Apache connector (mod_jk.so) does not work for Apache2.4.3 (windows)

CF10 64bit Apache connector (mod_jk.so) does not work for Apache2.4.3 (win64), where can I get a module that works?
I get this error from Apache :
C:\www\Apache2.4\bin>httpd -t
httpd: Syntax error on line 741 of C:/www/Apache2.4/conf/httpd.conf: Syntax error on line 2 of C:/www/Apache2.4/conf/mod_jk.conf: Cannot load C:\\ColdFusion10\\config\\wsconfig\\1\\mod_jk.so into server: The specified procedure could not be found.
I have already tried manually extracting the pre-built mod_jk22.so from the wsconfig.jar with same results.
If I switch to Apache 2.2.22 64bit, it does work. what I need is to be able to run on Apache 2.4.

Please check out this link.
http://rob.brooks-bilson.com/index.cfm/2012/2/21/Installing-ColdFusion-10-with-Apache-on-W indows
In this link, they are configuring with Apache 2.2 only.
When we were working colfusion 9 with Linux and apache, we had the same problem, it will work when it connect to Apache 2.0 but not with Apache 2.2 version.

How to connect from Oracle 11g to SQL Server 2008 R2

Hi,
Is it possible to connect from Oracle 11g on AIX to SQL Server 2008 R2? If so, what is the preferred method?
SQL Server has the original table. From Oracle 11g, we want to access data which is in SQL Server real time.
Thank You
Sarayu

Hi,
Have a look at these Oracle notes for the full information on the gateways -
Master Note for Oracle Gateway Products (Doc ID 1083703.1)
Functional Differences Between DG4ODBC and Specific Database Gateways (Doc ID 252364.1)
Gateway and Generic Connectivity Licensing Considerations (Doc ID 232482.1)
How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) 64bit Unix OS (Linux, Solaris, AIX,HP-UX) (Doc ID 562509.1)
How to Configure DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX Itanium) to Connect to Non-Oracle Databases Post Install (Doc ID 561033.1)
The Database Gateway for SQL*Server (DG4MSQL) needs a separate license but the Database Gateway for ODBC (DG4ODBC) is included in your RDBMS license. You only need to provide the third party ODBC driver needed by DG4ODBC.
Regards,
Mike

How to connect oracle database using jsf

how to connect oracle database using javaserver faces with connection pooling

Here is one way...
http://jakarta.apache.org/commons/dbcp/

How to Connection CF10 to Apache on Separate Linux boxes

Similar Messages

Maybe you are looking for