How to consider unrestricted stock for the run of MRP project?

Hi every one!
We are facing a problem using MRP on project stock.
We would like that the MRP takes unrestricted stock into consideration while calculating quantities to order for project stock.
For example, a project request 100 pieces of material X.
We have already 25 pieces of material X in unrestricted stock and 0 in project stock.
When I run MRP (MD51), it creates a Purchase Requisition of 100 pieces on the WBS element I have defined and not 75 as expected!!!
By searching in documents and forums, I have read I have to set the value "2 - Collective requirements only" into the field MRP4 > BOM explosion/dependent requirements > Individual/coll. of the Material Master.
I have done it but it doesn't change anything.
Thanks in advance for your support!!!
Bogdan

Hello guys!
As told, here I come with news about my problem.
Finally, the Strategy Group didn't solve our problem.
We didn't solve our problem as planned but we have found another way to work.
Instead of including the unrestricted stock in the MRP project, we use transaction CO46 to have an overview of the unrestricted stock of all the components of the project's BOM.
Based on that overview, the user can make stock transfers of the available quantities from the unrestricted stock to the project stock.
I hope it can help people having the same problem!
Bogdan

Similar Messages

In BAM, how to get activity ID for the running instance in the orchestration.

I am trying to add document reference URL to the active instance in the orchestration for the activity which is already started.
Please let me know how to get such activity ID.
Thanks
Jagadeesh
Jagadeesh RS

Are you using TPE to set up the Activity Tracking or BAM API. If you are using TPE then identify what has been set as the Activity Id in the BTT file. If the Message Id is used then use "BTS.InterchangeID" [refer
http://msdn.microsoft.com/en-us/library/aa562116.aspx] on the received message to get the Activity Id.
If however you've mapped the Activity Id in BTT to the InstanceId then use
"Microsoft.XLANGs.Core.Service.RootService.InstanceId"
to get the activity id.
Regards.

To run MRP without considering unrestricted stock

Hi,
Is it possible to run MRP without considering unrestricted stock of the material?
Best Regards,
Sitaraman

Dear All,
Thanks a lot for your response to this thread.
In fact i tried the option of providing value 1 to exclude the storage location stock from the MRP. But it did not fulfil my requirement.
My requirement is as below:
The business wants to create the material requirement by manual reservations.
Also for this MRP run except this manual reservations all other issue elements, receipt elements and stocks should not get considered.
With checking group configuration i am able to exclude all other issue, receipt and stock elements. But in this settings there is no option to exclude the unrestricted stock.
What happened when i tried giving 1 in MRP 4 view to exclude the storage location stock, the system not only excludes the stock but also it excludes the storage location from MRP run. Meaning...
Plant XXXX
SLOC YYYY
SLOC - YYYY current stock: 100
Manual reservation created (requirement) for SLOC -YYYY : 50
The expectation out of MRP run is, to create procurement proposals for 50 numbers with out considering SLOC - YYYY stock of 100 and not to exclude the SLOC YYYY itself.
Best Regards,
Sitaraman

How to post return stock to unrestricted stock for only Plant & Material Type combination?

Hello Everyone,
At present, whenever the stock is returned then it posted through 655 movement type. So, material is posted as quality stock.
Now, the requirement is to post the stock to unrestricted stock for Plant and Material type combination only. Which means, if the plant is 1413 and the material type is ERSA, VERP, and HIBE then for return sales order system post the stock directly to unrestricted stock, instead of quality stock.
So, is there any standard way of configuring the above scenario without going for validation (Z Fields)?
Regards
Anwar

Dear Mohammed ,
as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
follow the below logic to achieve your issue .
you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
wait for other experts solution , if any standard is possible or not .
Regards,
C.B Reddy.

How to populate " UnRestricted Stock" key figure from 0IC_C03

Hello All,
There is requirement for us to show a field known as "unrestricted stock" from the info cube 0IC_C03. but there is no such key figure in that info cube. I searched all the forums and learnt that it must be calculated on fly while the report executes.
can any body help to identify / populate the "Un Restricted Stock" from the info cube 0IC_C03.
Thanks for all your time

Hello Mr.Nagaraju vadlamani,
Thanks for your reply.
Can you please let me know how to get the following objects you mentioned to calculate the "unrestricted stock"
Projected Stock of today - ?
Demands with demand date today - ?
receipts with delivery date today - ?
Thanks,

Table for field unrestricted stock for a material

Hi,
Which table holds the value of unrestricted stock for a material?
Thanks in advance.
Phani.

Hi,
Thanks for your replies...
Does the fields suggested by you store the values of warehouse stock?
Regards,
Phani.

How do I get refunded for the purchase of a third party app?

I have purchased an app called crestron mobile pro on Saturday 2-15, when I actually needed the crestron mobile pro g version. How do I get refunded for the wrong version of the app, which I don't need anymore?

All purchases are considered final, but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

How long does it take for the auto updater to install a new version?

I've just seen that Flash v11.4.402.287 is available. How long should I wait for the auto updater to update my system (currently v11.4.402.278)?
In the past I have waited 2-3 days and the new version still hasn't been installed, even though the Task Scheduler shows that the auto updater is running. I've then given up and manually installed the new version as I think that this is too long to wait.
Thanks

The good news - the auto update has worked this time and I now have v11.4.402.287.
The not so good news - I've had a look through both flashinstall.log files and there is nothing strange there. I can see the times when the auto updater has done the update, and also the last 2 times when I've done the update manually. There aren't any other entries - i.e. the only entries are for successful installations.
As the update has worked for me this time I think that this can be closed.
Thanks for your help.

How long does it take for the new ios to load?

how long does it take for the new ios to load?

you mean to install it or to run after instalation?
downloading takes from a half hour, up to 2 hours if your connection is poor.
installing takes about 5 minutes.
and running it is like a minute.

Negative stocks for the previous period when closed MM period

hi,
I try to use MMPV to close MM period, error message is displayed "
Some materials have negative stocks for the previous period."
how to solve this problem and what cause this message? why system allow negative stock?
thanks

Hi
Negative stock means that for a material in your plant stock is 0 on current posting date but you still want to issue the material.
So in order to achieve this u need to activate the Negative stock for that material in material master and mark the setting of negative stock for the storage location.
Using the Transaction OLMB ---Goods Receipt
If you need further information
Refer this link
http://help.sap.com/saphelp_erp2004/helpdata/en/a5/63313343a211d189410000e829fbbd/frameset.htm
rgds
Chidanand

How do i get refunded for the apps that no longer work due to the fact i cant upgrade my phone?

how do i get refunded for the apps that i purchased that no longer work due to the fact i cant upgrade my 3.1.3 iphone

I have never bought an app but on all other things Apple somewhere has in tiny print the system requirements for running the software. If you're going to live in the world of outdated technology the way I do, you will quickly learn to always read system requirements.
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html - Apple states all sales are final, but you can always try.

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

How to find workarea ID for the work area name.

Hi Experts..
How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
Points would be rewarded for helpful answers..
Thanks
Kunal Halarnakar

U want to fetch the workarea description ?
we can fetch it from CCIHT_WALD table with the RECN value.
The informations are stored in AUSP table with the characterstic(ATINN) value.

How can i use AME for the new OAF page.

Dear all,
I have developed a new OAF page and registered under Employee Self Service.
How can i use AME for the approval process.
Appreciate your ideas?
zamora

I will try to answer based on my experience of working with iProcurement and AME. It depends on how you want to make a call to AME , directly from OAF Page or from Workflow and your requirement. You didn't specify what you want to show the users on OAF Page and your business requirement.
Before calling AME Engine from the OAF page or workflow, I guess you did already setup AME Transaction Type and it's Approval Groups, Conditions, Action Types and Rules. Do some testing from AME Business Analyst Test Workbench. Please note that, AME provides lot of PL/SQL API's that you have to call from your programs (java or workflow pl/sql)
Let's look at the workflow and putting an OAF Page as notification.
As Sameer said, you have kick-off workflow process from PR of CO and with in the workflow function, you make a call to AME Engine API's with the AME Transaction ID. This transactionId belongs to the AME Transsaction Type that you setup. Based on the rules setup, AME Engine generates list of approvers/approver and stores them AME Tables for that transactionId. Then, it sends a notification to the approver.
In the workflow, where that notification is defined, in the message body you have to put an attribute(&XX_WF_FWK_RN) of type document/send. And this attribute will have the constant JSP:/OA_HTML/OA.jsp?OAFunc=XX_FUNC&paramId=-&DOCUMENT_ID-. This function is SSWA Jsp function that makes a web html call to your OAF Region.
If your requirement is to just show the list of approvers on the OAF Page, you may have to call AME API diectly passing your AME TrasnactionId with other parameters. Then AME generates list of approvers and stores them in AME tables with each approver status. You can pickup those approvers using VO and show them on OAF Page.
Hope this gives some idea.

I have an apple ID for the South African iTunes store how do I get one for the US store?, I have an apple ID for the South African iTunes store how do I get one for the US store?

I have an apple ID for the South african i Tunes store. How do I get one for the US one? I want to use Mind Snacks.

You will need a valid billing address in the US and be in the US when you want to buy anything from it. You can try requesting that it be added to the South African, but ultimately it's the app's developer that will have to grant Apple a licence to sell it there : http://www.apple.com/feedback/itunes.html

How to consider unrestricted stock for the run of MRP project?

Similar Messages

Maybe you are looking for