How to consult data from R3 within an ABAP mapping in XI

My scenario is this:
FILE -> FILE ADAPTER -> ABAP MAPPING -> PROXY -> R3
But I need to filter wich lines in the file I want to send to R3, in order to do that i need to get some information from R3.
I have tried to make a proxy in XI but i´ve read that is not possible, how can i solve my problem? any ideas ?
I dont need a DP (dork proof) solution just an orientation.
thanks!.
Mariano.

Hi,
Can u explain a bit more.
As per my understanding u have a file, for certain input value u will check the condition in R3 system and based on that result only u will process ahead.
this is wat u wanted?
chirag

Similar Messages

  • How to select data from excel within certain range?

    hi all, i am having an application where i am reading data from an excel sheet. in my case i am taking the date as an input from the user in range i.e starting date and end date in dd-mm-yy format( or to to from)and then i have to read the data of all dates which come between given range by the user....
    how can i do it????
    can anyone help......
    thanks in advance.........

    Did you get the solution for your question ?
    I have the same requirement,
    1. Here, the user will provide the range like maximum and minimum values, then the VI should capture the data within the given range. ( from CSV file as attached )
    2. Then VI should calcluate the average value for captured data and export it to excel.
    This is my requirement can anyone help me on this.  
    Many thanks in advance
    rc_cks
    Attachments:
    sample_short.csv ‏2439 KB

  • How to extract data from BPC InfoCube via ABAP program?

    Hi experts!!
    I tried to extract data from a BPC InfoCube via ABAP program, but I did'n have succeed.
    I used the function 'RSDRI_INFOPROV_READ' to extract data from standard InfoCubes such as '0COPC_C07' and it run OK! However, when I change the InfoCube name to '/CPMB/WAIX8NE' (BPC InfoCube), everything goes wrong...
    Is there any difference between extracting data from BPC and standard InfoCubes?
    Thank you all!

    Moderator message - Welcome to SCN.
    But please do not cross and duplicate post.
    Thread locked.
    Rob

  • How to pull data from Active Directory in ABAP (non-CUA approach)?

    All,
    We have a requirement to pull information from AD into a WAS 6.20 system.
    I know there is the standard CUA/UME LDAP synchronization discussed at length in this forum but this in not what we are looking for. We would like to connect from an ABAP program (BAPI/RFC) to AD and pull a specific field  and store it in a custom table.
    I found one thread that describes how to do this with WebDynpro in Java, but this would be our last resort since we wouldn't be able to do that from the actual 6.20 WAS but would have to use another 2004s system which would extend the architecture of the current design.
    Any thoughts?
    Thanks
    GS

    Hi,
    1. First configure the LDAP properties in transaction LDAP
    2.You can use the functions LDAP_SYSTEMBIND and LDAP_SEARCH to retrieve the info you want
    you can read <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/906061c5-176b-2910-5091-e23baa4e7038">this document</a> for more help

  • How to read data from an excel using abap program?

    Hi
    I have to write an abap program to read the contents of ms excel across various
    sheets. Can any one help me regarding this
    Thanks in advance
    Satish

    Hai Satish,
    <b>You save  all your Excel sheets as Text Tab Delimited.</b>
    And then for each teext file can be uploaded into your daabase table.
    See the Report that  i have done.
    REPORT Z_UPLOAD_TO_DATABASE_TABLE.
    TABLES:
      ZDETMAST.                        " Database table to be uploaded
    Data declaration of the structure to hold ZDETMAST(zdetcode) data  *
    DATA:
      BEGIN OF FS_ZDETMAST,
        CNT(3)      TYPE C,                " Client
        DETCODE(15) TYPE C,                " Det Code
        DETCAT(1)   TYPE C,                " Det category
        DETTYPE(2) TYPE  N,                " Det type
        DETDESC(30) TYPE C,                " Det description
        PFLAG(1)   TYPE C,                " Det Flag
        TOTALDR(10) TYPE C,                " Total DR
        TOTALCR(10) TYPE C,                " Total CR
      END OF FS_ZDETMAST.
    Internal table to hold ZDETMAST(zdetcode) data                     *
    DATA:
      T_ZDETMAST LIKE STANDARD TABLE OF FS_ZDETMAST.
    Function Module to upload ZDETMAST Data
    CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
         FILENAME                      = 'D:/ZDETMAST_2.TXT'
         FILETYPE                      = 'ASC'
         HAS_FIELD_SEPARATOR           = 'X'
        HEADER_LENGTH                 = 0
        READ_BY_LINE                  = 'X'
        DAT_MODE                      = 'DAT'
        CODEPAGE                      = ' '
        IGNORE_CERR                   = ABAP_TRUE
        REPLACEMENT                   = '#'
        CHECK_BOM                     = ' '
        VIRUS_SCAN_PROFILE            =
      IMPORTING
        FILELENGTH                    =
        HEADER                        =
        TABLES
          DATA_TAB                      = T_ZDETMAST
       EXCEPTIONS
         FILE_OPEN_ERROR               = 1
         FILE_READ_ERROR               = 2
         NO_BATCH                      = 3
         GUI_REFUSE_FILETRANSFER       = 4
         INVALID_TYPE                  = 5
         NO_AUTHORITY                  = 6
         UNKNOWN_ERROR                 = 7
         BAD_DATA_FORMAT               = 8
         HEADER_NOT_ALLOWED            = 9
         SEPARATOR_NOT_ALLOWED         = 10
         HEADER_TOO_LONG               = 11
         UNKNOWN_DP_ERROR              = 12
         ACCESS_DENIED                 = 13
         DP_OUT_OF_MEMORY              = 14
         DISK_FULL                     = 15
         DP_TIMEOUT                    = 16
         OTHERS                        = 17
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.                                 " IF SY-SUBRC <> 0.
    LOOP AT T_ZDETMAST INTO FS_ZDETMAST.
      WRITE:
        / FS_ZDETMAST-CNT,
         FS_ZDETMAST-DETCODE,
         FS_ZDETMAST-DETCAT,
         FS_ZDETMAST-DETTYPE,
         FS_ZDETMAST-DETDESC,
         FS_ZDETMAST-PFLAG,
         FS_ZDETMAST-TOTALDR,
         FS_ZDETMAST-TOTALCR.
    ENDLOOP.                               " LOOP AT T_ZDETMAST ...
    LOOP AT  T_ZDETMAST INTO ZDETMAST.
       IF SY-TABIX GE 2.
         INSERT ZDETMAST.
        DELETE ZDETMAST.
       ENDIF.                              " IF SY-TABIX EQ 2
    ENDLOOP.                               " LOOP AT  T_ZDETMAST
    Hope this helps you a lot.
    <b>You can also use ALSM_EXCEL_TO_INTERNAL_TABLE FM to have excel data in ITAB AND THEN YOU CAN INSERT DATA INTO DATABASE TABLE.</b>
    <b>Reward points if it helps you.</b>
    Regds,
    Rama chary.Pammi

  • How to extract data from the XL sheet for mapping

    Hello all,
    I have a scenario of file to idoc, where in the source file contains the information in XL sheet. Can we access the XL sheet data for mapping ? if so can anyone helpme providing the procedure.

    Hi,
    For reading an XL file u need to write an java code.
    refer the below weblog for more help:
    SAP Network Blog: XI: Generating Excel files without the Java nor the Conversion agent not possible?
    /people/michal.krawczyk2/blog/2005/12/10/xi-generating-excel-files-without-the-java-nor-the-conversion-agent-not-possible
    SAP Network Blog: Read Excel instead of XML through FileAdapter
    /people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
    Thnx
    Chirag

  • How to pass data from one internal session to another internal session

    hi all sap experts ,
    How to pass data from one internal session to another internal session and from oneExternal session to another external session.
    Except : Import and Export parameters and SPA/GPA parameters.
    Tell me the otherWay to pass data ..
    Plz
    Thanks in advance

    hi,
      abap memory management u will understand about this concept.
    the import /export parameter will help u that passing data between two internal sessions by using abap memory.
      for syntax
    Passing Data Between Programs
    There are two ways of passing data to a called program:
    Passing Data Using Internal Memory Areas
    There are two cross-program memory areas to which ABAP programs have access (refer to the diagram in Memory Structures of an ABAP Program) that you can use to pass data between programs.
    SAP Memory
    SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens (see below).
    ABAP Memory
    ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse. For further information, refer to Data Clusters in ABAP Memory.
    Filling Input Fields on an Initial Screen
    Most programs that you call from other programs have their own initial screen that the user must fill with values. For an executable program, this is normally the selection screen. The SUBMIT statement has a series of additions that you can use to fill the input fields of the called program:
    Filling the Selection Screen of a Called Program
    You cannot fill the input fields of a screen using additions in the calling statement. Instead, you can use SPA/GPA parameters. For further information, refer to Filling an Initial Screen Using SPA/GPA Parameters.
    Message was edited by:
            sunil kumar
    Message was edited by:
            sunil kumar

  • How to pass data from one internal session to another

    Hi SAP Experts,
    How to pass data from one internal session to another and from One external session to another external session. I used import and export parmeter and SPA/GPA parameters. What is the other way to pass data?
    Please tel me urgently
    Thank you
    Basu

    Memory Structures of an ABAP Program
    In the Overview of the R/3 Basis System you have seen that each user can open up to six R/3 windows in a single SAPgui session. Each of these windows corresponds to a session on the application server with its own area of shared memory.
    The first application program that you start in a session opens an internal session within the main session. The internal session has a memory area that contains the ABAP program and its associated data. When the program calls external routines (methods, subroutines or function modules) their main program and working data are also loaded into the memory area of the internal session.
    Only one internal session is ever active. If the active application program calls a further application program, the system opens another internal session. Here, there are two possible cases: If the second program does not return control to the calling program when it has finished running, the called program replaces the calling program in the internal session. The contents of the memory of the calling program are deleted. If the second program does return control to the calling program when it has finished running, the session of the called program is not deleted. Instead, it becomes inactive, and its memory contents are placed on a stack.
    The memory area of each session contains an area called ABAP memory. ABAP memory is available to all internal sessions. ABAP programs can use the EXPORT and IMPORT statements to access it. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
    All ABAP programs can also access the SAP memory. This is a memory area to which all sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters are often used to preassign values to input fields. You can set them individually for users, or globally according to the flow of an application program. SAP memory is the only connection between the different sessions within a SAPgui.
    The following diagram shows how an application program accesses the different areas within shared memory:
    In the diagram, an ABAP program is active in the second internal session of the first main session. It can access the memory of its own internal session, ABAP memory and SAP memory. The program in the first internal session has called the program which is currently active, and its own data is currently inactive on the stack. If the program currently active calls another program but will itself carry on once that program has finished running, the new program will be activated in a third internal session.
    Data Clusters in ABAP Memory
    You can store data clusters in ABAP memory. ABAP memory is a memory area within the internal session (roll area) of an ABAP program and any other program called from it using CALL TRANSACTION or SUBMIT.
    ABAP memory is independent of the ABAP program or program module from which it was generated. In other words, an object saved in ABAP memory can be read from any other ABAP program in the same call chain. ABAP memory is not the same as the cross-transaction global SAP memory. For further information, refer to Passing Data Between Programs.
    This allows you to pass data from one module to another over several levels of the program hierarchy. For example, you can pass data
    From an executable program (report) to another executable program called using SUBMIT.
    From a transaction to an executable program (report).
    Between dialog modules.
    From a program to a function module.
    and so on.
    The contents of the memory are released when you leave the transaction.
    To save data objects in ABAP memory, use the statement EXPORT TO MEMORY.
    Saving Data Objects in Memory
    To read data objects from memory, use the statement IMPORT FROM MEMORY.
    Reading Data Objects from Memory
    To delete data clusters from memory, use the statement FREE MEMORY.
    Deleting Data Clusters from Memory
    please read this which provide more idea about memory
    Message was edited by:
            sunil kumar

  • How to upload data from excel to form using webutil

    Hi,
    In the sample provided by Oracle
    http://www.oracle.com/technology/products/forms/htdocs/webutil/howto_ole.html
    Note 247606.1 How to Copy Records From a Form Into Excel
    It shown the methods of how to copy data from form to excel but is there any sample to provide the step on how to read the cell from excel into Form in 10g.

    declare
    args client_ole2.list_type;
    application client_ole2.obj_type;
    vworkbooks client_ole2.obj_type;
    vdoc     client_ole2.obj_type;
    vworksheet     client_ole2.obj_type;
    vrange               client_ole2.obj_type;
    begin
    -- create app object
    application := client_ole2.create_obj('Excel.Application');
    client_OLE2.SET_PROPERTY(application, 'Visible','True');
    -- get workbooks object
    vworkbooks := client_ole2.get_obj_property(application, 'Workbooks');
    -- and open a file
    args := client_ole2.create_arglist;
    client_ole2.ADD_ARG(args, 'c:\tp_ae.xls');
    vdoc :=client_ole2.INVOKE_OBJ(vworkbooks,'Open',args);
    client_ole2.destroy_arglist(args);
    -- get a worksheet object
    -- for this to work you need to know the sheet name or its index
    args := client_ole2.create_arglist;
    client_ole2.ADD_ARG(args, 1); <-- name or index
    vworksheet := client_ole2.get_obj_property(vdoc,'Worksheets',args);          
    client_ole2.destroy_arglist(args);
    -- get a range object which in this case is just a cell
    -- for this to work you need to know the cell coordinates
    args := client_ole2.create_arglist;
    client_ole2.ADD_ARG(args, 'B6');          
    vrange := client_ole2.get_obj_property(vworksheet,'Range',args);
    client_ole2.destroy_arglist(args);
    -- and here you get the value
    message(client_ole2.get_char_property(vrange,'Value'));
    -- release objects          
    client_ole2.release_obj(vrange);
    client_ole2.release_obj(vworksheet);
    client_ole2.release_obj(vdoc);
    client_ole2.release_obj(vworkbooks);
    client_ole2.release_obj(application);
    end;

  • HOW TO UPLOAD DATA FROM EXCEL TO INTERNALTABLE

    HI,
    HOW TO UPLOAD DATA FROM EXCEL TO INTERNALTABLE?  & WITH EXAMPLE.

    hi,
    chk this, put the data into an excel file.
    fields inside it are name and age.
    sample excel sheet.
    coloumn 1 is name and column 2 is age
    name age
    A     8
    C     13
    D     55
    DATA : int_excel LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
    data : record like db_name_age occurs 0 with header line.
    DATA : v_start_col TYPE i VALUE '1', "starting col
           v_start_row TYPE i VALUE '1', " starting row
           v_end_col   TYPE i VALUE '2', " total columns
           v_end_row   TYPE i VALUE '10'. "total no of record
    FORM f_upload .
      CLEAR : int_excel, int_excel[].
      CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
        EXPORTING
          filename                = wf_filename
          i_begin_col             = v_start_col
          i_begin_row             = v_start_row
          i_end_col               = v_end_col
          i_end_row               = v_end_row
        TABLES
          intern                  = int_excel
        EXCEPTIONS
          inconsistent_parameters = 1
          upload_ole              = 2
          OTHERS                  = 3.
      IF sy-subrc <> 0.
    *Message is 'Unable to upload data from  '  wf_filename.
        MESSAGE e169(zm050) WITH wf_filename.
      ELSE.
        SORT int_excel BY row col.
        REFRESH : record.
        CLEAR   : record.
        LOOP AT int_excel.
          CASE int_excel-col. "go thru each column.
            WHEN 1.
              record-name  = int_excel-value.
            WHEN 2.
              record-age = int_excel-value.     
          ENDCASE.
          AT END OF row.
            APPEND record.
            CLEAR record.
          ENDAT.
        ENDLOOP.
    *inserting into table
    modfiy db_name_age from table record.
      ENDIF.
    <i><b>ANOTHER EXAMPLE</b></i>
    TYPE-POOLS truxs.
    types: begin of t_tab,
    col1(5) type c,
    col2(5) type c,
    col3(5) type c,
    end of t_tab.
    data : itab type standard table of t_tab,
           wa type t_tab.
    data it_type type truxs_t_text_data.
    parameter p_file type rlgrap-filename.
    data ttab type tabname.
    at selection-screen on value-request for p_file.
    CALL FUNCTION 'F4_FILENAME'
    EXPORTING
    PROGRAM_NAME = SYST-CPROG
    DYNPRO_NUMBER = SYST-DYNNR
    FIELD_NAME = 'P_FILE'
    IMPORTING
    FILE_NAME = p_file
    start-of-selection.
    CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
    I_FIELD_SEPERATOR =
    I_LINE_HEADER = 'X'
    i_tab_raw_data = it_type
    i_filename = p_file
    tables
    i_tab_converted_data = itab[]
    EXCEPTIONS
    CONVERSION_FAILED = 1
    OTHERS = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    end-of-selection.
    loop at itab into wa.
    write : wa-col1,
            wa-col2,
            wa-col3.
    endloop.
    rgds,
    anver
    <i>if hlped pls mark points</i>

  • How to upload data from excel to SAP and options to be used

    How to upload data from excel to SAP and options to be used
    thank you,
    Regards,
    Jagrut Bharatkumar shukla

    Hi Jagrut,
        You can use gui_upload.
    chk the sample program mentioned below.
    REPORT ZFTP .
    DATA: BEGIN OF I_FILE OCCURS 0,
    DATA(2000) TYPE C,
    END OF I_FILE.
    DATA: BEGIN OF I_FILE2 OCCURS 0,
    DATA(2000) TYPE C,
    END OF I_FILE2.
    DATA: W_COUNT TYPE I.
    PARAMETERS: P_FILEN TYPE STRING,
    P_FILE2 TYPE STRING,
    P_NUM(4) TYPE N..
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
    PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
    PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
    START-OF-SELECTION.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = P_FILEN
    FILETYPE = 'ASC'
    HAS_FIELD_SEPARATOR = 'X'
    HEADER_LENGTH = 0
    READ_BY_LINE = 'X'
    DAT_MODE = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    CHECK_BOM = ' '
    VIRUS_SCAN_PROFILE =
    NO_AUTH_CHECK = ' '
    IMPORTING
    FILELENGTH =
    HEADER =
    tables
    data_tab = I_FILE
    IF SY-SUBRC <> 0.
    MESSAGE E024(Z1).
    ENDIF.
    LOOP AT I_FILE.
    W_COUNT = W_COUNT + 1.
    IF NOT W_COUNT > P_NUM.
    MOVE I_FILE TO I_FILE2.
    APPEND I_FILE2.
    ENDIF.
    ENDLOOP.
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    BIN_FILESIZE =
    filename = P_FILE2
    FILETYPE = 'ASC'
    APPEND = ' '
    WRITE_FIELD_SEPARATOR = 'X'
    HEADER = '00'
    TRUNC_TRAILING_BLANKS = ' '
    WRITE_LF = 'X'
    COL_SELECT = ' '
    COL_SELECT_MASK = ' '
    DAT_MODE = ' '
    CONFIRM_OVERWRITE = ' '
    NO_AUTH_CHECK = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    WRITE_BOM = ' '
    TRUNC_TRAILING_BLANKS_EOL = 'X'
    WK1_N_FORMAT = ' '
    WK1_N_SIZE = ' '
    WK1_T_FORMAT = ' '
    WK1_T_SIZE = ' '
    IMPORTING
    FILELENGTH =
    tables
    data_tab = I_FILE2
    FIELDNAMES =
    *& Form F_FILE_GET
    text
    -->P_P_FILEN text
    -->P_TEXT_G01 text
    FORM F_FILE_GET USING L_FILENA L_TEXT.
    CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
    DEF_FILENAME = ' '
    DEF_PATH = ' '
    MASK = ',.,*.TXT.'
    MODE = 'O'
    TITLE = L_TEXT
    IMPORTING
    FILENAME = L_FILENA
    rc =
    EXCEPTIONS
    INV_WINSYS = 1
    NO_BATCH = 2
    SELECTION_CANCEL = 3
    SELECTION_ERROR = 4
    OTHERS = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Reward if helpful.
    Regards,
    Harini.S

  • How to send data from internal table to the shared folder in ABAP

    Hi experts,
             My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is  "
    xxx\y\z....".
    I do not have any idea on how to send data from internal table to the shared folder path.
    can anybody please help me out how to do this?
    Thanks & Regards
    Sireesha.

    Where that folder is located, its on presentation server i.e. desktop or application server.
    If its on presentation server, use FM GUI_UPLOAD.
    If its on application server, then use DATASET functions. Have a look at below link.
    [File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
    I hope it helps.
    Thanks,
    Vibha
    Please mark all the useful answers

  • How  to transfer data from one system to another by datamart please give de

    how  to transfer data from one system to another by datamart please give details

    Hi Deba,
    Find the below SAP help doc which may help u...
    http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
    Also find the below threads...
    Loading data from one cube to another cube.
    data copy from infocube to infocube in two different BW systems
    Delta when loading from ODS to ODS
    reg datamart
    Data mart flag
    Regards,
    KK.

  • How to read data from a CLUSTER STRUCTURE not cluster table.

    Hi,
    how to read data from a CLUSTER STRUCTURE not cluster table.
    regards,
    Usha.

    Hello,
    A structre doesnt contain data.. so u cannot read from it. U need to find out table of that structure and read data from it.
    Regards,
    Mansi.

  • How to extract data from SAP in FDM 11121

    I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

    I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
    Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

Maybe you are looking for

  • "Memory Full" error when changing page setup

    I'm running Crystal Reports 2008 and yesterday I had two landscape reports begin doing some weird things: Symptoms: -Any change to the Page Setup dialog throws the Memory Full error (even just bringing it up and clicking ok) -The reports were created

  • Ipod Touch 4th generation - app store is just "loading"

    Our son's 4th generation ipod will not open up itunes, notify of updates etc... States the WiFi is on - but no app store & needs his minecraft update ** We do not have access to our itunes account (on laptap that crashed)

  • Firewire will not mount any external devices

    I have tried to mount 2 different external hard drives and neither will mount. They will mount on other computers so it isn't the device. I've tried all the troubleshooting I have found on here and still no results. Is there any advice that maybe i h

  • Labview - GOOP Programmer

    I'm currently looking for a Labview developer to work on a team developing vision and data acquisition software for internal quality instrumentation systems.  This job will be a contract to possible hire depending on the skills that they possess. A q

  • How to recover apps data??

    If I am running out of space and I need to delete a game, but later I want to copy it to another device, can I recover the app data or do I have to start the game from the beginning? I know that with a back up it saves data but I want to save each ap