How to contact MSI Authorized personnel for/from Bangalore, India.

Hello,
I bought a MSI motherboard P7N Platinum (under 3 years warranty), based computer from the Microport shop, NR Road. I had a problem with this computer and took it back to the same shop. The sales person most probably misguided me that the motherboard is at fault and made me RMA the motherboard.
The MSI RMA center D-LInk people made me wait 1 month and then have given me a P7N Platinum, but a much older motherboard and now the 3D application are working really really slow and the monitor keeps freezing for fraction of seconds, before changing to the next frame.
The previos motherboard used to display all the 3D applications fine.
Could someone give me the name/phone number for me to contact MSI Authorized personnel for/from Bangalore, India as I am not happy with the service provided by D-Link and feel cheated having bought a MSI product.
Thanks.

Quote
As far as I remember, the original motherboard in the bios setting had PCI-E frequency set to 200, I do not remember if the PCI-E frequency on that board started from 200 or ended at 200?
Sorry, but you must be mistaken. The defaul PCI Express Frequency is 100 MHz. Setting it to 200 would most certainly kill your board or the video card.
Quote
I do not find an appreciable performance boost when I take this setting from 100 to 170
Good lord, what are you doing there? Do not set the PCI Express Frequency to 170 MHz unless you want to blow something up.
Quote
If I set the PCI-E frequency at 200, the system hangs, there is no video on the monitor
That is normal. Please clear CMOS with the main A/C power cable removed from your PSU and load "Optimized Defaults" in BIOS Setup. Under no circumstances should you raise the PCI-E Frequency to 200 MHz. That's is what you do if you want to actually kill something.
I hope you are lucky and have not blown something to pieces yet.
Quote
Could someone enlighten me on the starting and ending frequencies of PCI-E on the latest motherboards MSI P7N Platinum 750i chipset.
The default PCI-E Frequency is 100 MHz on EVERY Mainboard. ... and that is also where it should stay.
Now, please provide full system specifications. Read the >>Posting Guide<<.
Quote
As you can see the replacement is much older.
As I already pointed out in my last post: This does not really atter. Check the PCB Version (it is printed onto the PCB, right next to the model Number (MS-7380). If that it is the same PCB Version, you received exactly the same board model.
Quote
I bought a MSI motherboard P7N Platinum (under 3 years warranty), based computer from the Microport shop, NR Road. I had a problem with this computer
What problem did you originally have?
Did you install the new board you got yourself or did the shop do that for you?

Similar Messages

How to contact Apple support in Germany from India ?

how to contact Apple support in Germany from India ? The number mentioned on the apple support page for German support is not reachale from India. if anyone has been successful in contacting apple support teams in another country, Kindly suggest.

Warranty and support is only valid in the country of origin, or in the case of a device purchased in an EU country, only in an EU country.
Unless you will be visiting an Apple store in one of the EU countries before the warranty expires, you are pretty much out of luck.
FYI, the Contact Us link at the bottom of the page provides the appropriate contact information for Apple.

Windows vista home premium service pack 2.error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber

windows vista home premium service pack 2。error measage __（the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance ）no error nurber

Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang

ERROR: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.

Hello Everyone,
I keep getting this when trying to install 0r repair SQL Server 2008 R2 on a SBS 2011 Standard.
TITLE: Microsoft SQL Server 2008 R2 Setup
The following error has occurred:
The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK
the provided link says "There is no additional information about this issue" i am helpless
please tell assist.
Thanks.
Abdallah.M.M

Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang

How to undervolt MSI R9 280x for Linux? VBE has no effect on cards

Hi!
Does someone know, how to lower the core voltage for a MSI R9 280x under Linux? I have 2 cards. The old one is a s/n 602- V277 -28SB (great!) and the second one is a s/n 602- V277 -38SB (bad!).
I tried with VBE on my Windows-machine and set the voltage in the "State 1 - Performance" tab to 1062 for #6 and #0. After flashing the modded bios Vgpu is still at 1200 mV when measured directly on the card with a multi meter. Power consumption at the wall is 270 Watts. However, GPUz shows 1062 mV. Afterwards I set the voltage to -100 in Afterburner. The card now reads 1097 mV and the power consumption dropped to 235 Watt.
I have no idea why the card ignores the VBE settings. Any advice would be appreciated.

Quote from: love on 31-January-14, 06:29:44
Hi!
Does someone know, how to lower the core voltage for a MSI R9 280x under Linux? I have 2 cards. The old one is a s/n 602- V277 -28SB (great!) and the second one is a s/n 602- V277 -38SB (bad!).
I tried with VBE on my Windows-machine and set the voltage in the "State 1 - Performance" tab to 1062 for #6 and #0. After flashing the modded bios Vgpu is still at 1200 mV when measured directly on the card with a multi meter. Power consumption at the wall is 270 Watts. However, GPUz shows 1062 mV. Afterwards I set the voltage to -100 in Afterburner. The card now reads 1097 mV and the power consumption dropped to 235 Watt.
I have no idea why the card ignores the VBE settings. Any advice would be appreciated.
You are lucky, on my 28SB I can't boot after any change from 1200mV, even with 1193mV

How to contact someone in charge for the local support (croatia)?

Hello everyone,
Recently I needed assistance for my PowerMac G5 Quad. It's a problem with the water-cooling unit (but this is not the point). Cutting short: the first apple authorized service center hasn't found any problem suggesting that I should "let it break" to pinpoint the real problem (sure.. let's melt the whole cpu to find later that only a sensor was fried...). In the meantime, when I was asking to order a copy of Leopard (to replace Tiger on the G5) they offered me pirated software. I refused, took the Powermac back and I'll never be back there.
The second technician (another AUTHORIZED reseller): Took the quad. Said that all was normal with the hardware test. When I said to him that I also tryed that (I'm not a newby) and that he should try the thermal calibration using the diagnostic disk (which every technician should have)... at the phone he sounded very confused. I had to explain to him what a diagnostic disk is and why is necessary to perform a thermal calibration everytime the cooling unit or the cpu's are disassembled for repair or replacing.
Took back the quad. No improvements.
I don't want to waste fuel on another trip to a new technician. I want to contact somone in charge of the customer support in Croatia to give informations about those reseller and their unbelievable support. Noone else have to be serviced by such incompetent technicians...
.... so the question is very simple. How can I contact someone in charge for the customer support here in Croatia or maybe in Italy? I speak italian, a good english and a good Croatian, so i don't mind to speak by phone to someone here in Croatia, in Italy or in an English speaking country.
Thank you for your help!

Apple has no office in Croatia, so you would need to call Apple support in another country. Their phone contacts can be found here:
http://support.apple.com/kb/HE57
You can try asking to speak with someone in Customer Relations, but I don't know which countries have representatives.
Regards.

How to contact MSI

This is a community level support forum what means most of us active here (including moderators/admin) are just normal users like you. Although the community will help you with any question if possible there are problems we can't do anything about and you will have to contact MSI (e.g. to help with official technical informations, rma or if you want to complain about a product and all other issues only contact with an MSI official is useful for). If you have been linked to this post other users already realized you need to contact MSI directly.
Global support:
For global support queries you have to register at http://register.msi.com/. After registering and logging in go to "My Support" and "Ask For Support" which allows you to issue your problem.
USA & Canada:
Technical Support - http://service.msicomputer.com/msi_user/support/ts_form.aspx
RMA - http://service.msicomputer.com/msi_user/rma_form_new.aspx
Europe (including UK/Ireland)
RMA for MSI-systems (i.e. notebooks, netbooks, All-In-Ones, nettops, Wind-PCs, full systems) - http://jkarma.msi.com.tw/Customer_Service/
Components, such as for mainboards, VGA cards and multimedia peripheral devices should be returned to the place of purchase. There is no direct RMA to MSI available. The reseller will request RMA.
Support Germany - http://de.msi.com/support-request
Support France - http://frsupport.msi.com/
Where to Buy
http://www.msi.com/service/wheretobuy/
Global Warranty Service for the Notebook
also via http://register.msi.com/
Contacts:
http://www.msi.com/about/contact-us/

Quote
As far as I remember, the original motherboard in the bios setting had PCI-E frequency set to 200, I do not remember if the PCI-E frequency on that board started from 200 or ended at 200?
Sorry, but you must be mistaken. The defaul PCI Express Frequency is 100 MHz. Setting it to 200 would most certainly kill your board or the video card.
Quote
I do not find an appreciable performance boost when I take this setting from 100 to 170
Good lord, what are you doing there? Do not set the PCI Express Frequency to 170 MHz unless you want to blow something up.
Quote
If I set the PCI-E frequency at 200, the system hangs, there is no video on the monitor
That is normal. Please clear CMOS with the main A/C power cable removed from your PSU and load "Optimized Defaults" in BIOS Setup. Under no circumstances should you raise the PCI-E Frequency to 200 MHz. That's is what you do if you want to actually kill something.
I hope you are lucky and have not blown something to pieces yet.
Quote
Could someone enlighten me on the starting and ending frequencies of PCI-E on the latest motherboards MSI P7N Platinum 750i chipset.
The default PCI-E Frequency is 100 MHz on EVERY Mainboard. ... and that is also where it should stay.
Now, please provide full system specifications. Read the >>Posting Guide<<.
Quote
As you can see the replacement is much older.
As I already pointed out in my last post: This does not really atter. Check the PCB Version (it is printed onto the PCB, right next to the model Number (MS-7380). If that it is the same PCB Version, you received exactly the same board model.
Quote
I bought a MSI motherboard P7N Platinum (under 3 years warranty), based computer from the Microport shop, NR Road. I had a problem with this computer
What problem did you originally have?
Did you install the new board you got yourself or did the shop do that for you?

How to create a authority group for our customer table(se54)?

Hi,everyone:
I found a problem when I create a authority group for my customer table,I can't write the creation
to a request no(can't assign to a package),I want to know whether the authority group I created can be
transport to the PRD when I realse the request no.
Thanks!!!

Auth Group is nothing but a table entry so for sure it can be transported to any environment, before Assigning any Auth group create one in SE54 when you try saving it it would ask you the TR number which you can transport to PROD.

How to contact ichat in home computer from notebook compputer

I have only one aim account in my home computer and notebook. How do I contact or talk to my kids at home from my notebook when I am away? I just seem to get myself on the notebook. Thank you

Hi Ester:
You need a seperate screen name for each computer.
You either have to get a seperate free AIM account http://www.aim.com/ (Look for get a free screen name)
or register for another .Mac account and you get to keep the screen name after the free 60 day trial.
I hope this helps!

How to export/import the certificates for/from 'Partner company' step-by-step in exchange 2013

Dear EXCHANGE EXPERTS,
I am a newbie in "Exchange World" and I try hard to learn and figure out how Exchange messaging works.
Sometimes the searches for information are gratified with wonderful articles and blogs, but sometimes days of searches bring you nothing but tiredness.
I cannot find a clear information (step-by-step) how to exchange the certificates with the Partner company for TLS mutual communication in Exchange 2013.
I would appreciate the help of experts.
Vi

Hello
"You can do it on several ways. If both organizations are using publicly trusted certificate on Exchange servers, you are good to go. If that’s not the case you will have to cross-import Root CA certificates on both sides. Alternatively, you can also
issue certificates for SMTP for both Exchange organization from a single trusted RootCA. Anyway, the point is that each Exchange server must trust the certificate installed (and assigned to SMTP service) on another Exchange server"
'Trusted Root Certification" -->yes /local computer/
if your company and partner company have a public cert and assigned to smtp service not need do
anything with cert.
if not have public cert but have cert from own internal ca booth company, you need
cross-import Root CA certificates to exch servers and is ok. you send root ca caert to company and partner company send his own root certificate and that inport to local computer 'Trusted Root Certification"
store on exch server.
if not have internal ca only self signed you need send self signed cert
sorry my english

How to create msi with transform for zfdagent

As technicians in our organisation we are given the zfdagent.msi to
install, each time we have to laboriously enter all the required
organisation specific installation parameters........in short how can we
create a transform/answer file package to make life easier :-)

thanks for the reply, I had looked at that but as us mere technicians have
no access to server-side info it was kinda confusing etc, I have however
downloaded an evaluation copy of a software package that did this no
problem :-), I knew that with MS Office etc creating transform files etc
was relatively trivial and that surely this should be not a huge hassle
with the agent. Many thanks for your reply , Ian

Error 1719. The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Getting this error while installing the package in the windows 2012.

Getting below mentioned error while installing a package in the windows 2012 server remotely through psexec command
Error 1718. Windows Installer Service could not be accessed.
The same msi is getting installed local in through when we are doing through manually
Please help on the same

Hi Rahulan,
Would you please let us know current situation of this issue? If any update, please feel free to let us know.
Just addition, please refer to following threads and check if can help you.
The Windows Installer Service could not be accessed.
error 1719 windows installer service could not be accessed ....
Hope this helps.
Best regards,
Justin Gu

HT3209 How long are rental movies rented for from iTunes

What is the duration of a rental movie from iTunes? Is the time always the same?

Thirty days from when it was rented, or 24(USA)/48(elsewhere) hours from when it was first played, whichever comes first.
(84995)

How to contact the author of an application on the iPhone AppStore?

Is there a link on the iPhone AppStore to send questions or suggestions to the developer of an application?
(If not, why isn't there one? )

Thank you Varjak!
So it's as I supposed...
Unfortunately I don't have iTunes installed on this PC, so that's why I searched on the iTunes webpage...
And indeed I don't understand why they don't provide the same link on the iTunes webpage. (maybe to "encourage" you to open the iTunes application, or maybe in order not to provide links between the iTunes page and the developer page, links which would be processed by the search engine bots and the page ranking algorithms...)

How to get iTunes gift card for free in India?

I am willing to get free iTunes gift card here in India I have checked the web and have found one way through FREE MY APP but later on found that the points can be redeemed only in us iTunes Store not in indian iTunes Store so can any one suggest me any way to do such things and get iTunes free gift card In india please help me I don't have credit card so I am unable to make paid apps purchases and please don't recommend me to jailbreak the iPhone I am not interested in that

The code is on the back of the iTunes gift card
Do you have an iTunes gift card?

How to contact MSI Authorized personnel for/from Bangalore, India.

Similar Messages

Maybe you are looking for