How to contact the Dubai technical support for Iphone from outside dubai
how to contact the Dubai technical support for Iphone from outside Dubai
If you purcased your iPhone from one of the UAE cell carriers, you will need to find the support number for the carrier, Etisalat or DU, from which you purchased the iPhone. If you purchased your iPhone from the online Apple Store in the UAE, you can find their phone number here:
http://support.apple.com/kb/HE57#U
Regards.
Similar Messages
-
How to get the restriction pass code for iPhone ?
How to get the restriction pass code for iPhone ?
if you forgot it you have to restore your phone to get past that code
-
Poor Canadian Technical Support for iPhone
Is anyone else receiving horrendous technical support from Rogers for the iPhone G3? My phone died nine days ago (I can hear the caller but they can't hear what I am saying). Went through every tech support suggestion provided by Apple and Rogers. On 2 March they said they were sending a replacement. Still no phone.
hey!
ya i had a strange fade on my screen. i didn't know if it even was a issue and i was afraid of it getting worst, and havin to deal with rogers. i've heard too many rogers horror stories, so i decided i'd take it to a apple store and have then genius bar have a look. once they saw the fade they gave me a new phone on the spot! didn't expect them to do that at all! (and i got my first phone july 12)
when i first called rogers about my problem, they told me to bring it to a store, but they know nothing! i called the store just to varify that i should bring it in and they said that they would do nothing... too bad telus didn't get the iphones!
i'd recommend that you should book a appointment too, well if the replacement doesn't show up soon!
hope this helps! -
How to find the right primary key for DSO from Business Content
According to best practice design, it is reccomended to make a DSO where all fields from Business COntent Datasources are transferred.
But, how to find the right primary indeks ?
Any good suggestions ?
For many of the Business Content dataflows there are not DSOs present, so ther e is no tip to get from the dokumentations as gfar as I have found.
best Regards
IngridHi Ingrid,
Your question will be perfect in case if you are going for a Custom cube.
You will not have any problem when you create a Datasource in R/3 level even if it is been built on a single table or on view.
Only point that you want to know how to design my Key fields in ODS.
This will be purely depends at what level that you want to bring the data.
Egg:-
If you run the data source in RSA3 and check for Each GL if you have 10 liine items and you want all the 10 line items to be transfered to BW.
In this case you need to check what is the unique combination of fields that is making this lineitems to exists as 10.then include all those fields into Your ODS Key Fields.
This way you can have 10 records for that perticular GL in both sides, by which u will make sure that the data is been completely transfered.
If in case if you clude your own Key fields then you will get the correct Total in report for each GL but you can't see all those 10 line items.
For any case you need to figureout how many records that you want to take into BW based on that check the fields that makes it unique and then add them to ODS Keyfields that will solve your requirement.
I think this will clear your doubt.
Best Regards,
VNK. -
How to calculate the total running time for process from sysssislog entries
Hi All,
I have the below query which gets me the log entries form the logs table when the process started/completed.
Select row_number() over (order by starttime) row_num,Substring( Substring(message, CharIndex('''',message) +1 ,Len(message)) ,0, CharIndex('''',Substring(message, CharIndex('''',message) +1 ,Len(message)))) as Description,
starttime,endtime,message
from dbo.sysssislog
where (message like 'start%' or message like 'finish%' ) and
LEFT(Substring( Substring(message, CharIndex('''',message) +1 ,Len(message)) ,0, CharIndex('''',Substring(message, CharIndex('''',message) +1 ,Len(message)))),1) between 'A' and 'Z'
order by starttime
However,I have to build a report on the top of it showing how much time that attribute/dimension/heirarchy took to execute(Ex-How much time did YearlyReview dimension take to complete).I dont have much knowledge of T-SQL and unable to figure out how to calculate
that on SQL or report level.
Could someone please assist me in getting the exact query for that?
Thanks a lot.I get the below output(sample 20 rows) on executing this query.Also,a start process does not necessarily follow up a finished message for the same dimension as it may have been stopped or it failed.So we need to leave it as NA in case it started but dint
finish
Row_Num Description starttime endtime Message
1 PAC SC Super Type 12/13/12 16:38 12/13/12 16:38 Started processing the 'PAC SC Super Type' dimension.
2 PAC SC Super Type 12/13/12 16:38 12/13/12 16:38 Started processing the 'PAC SC Super Type' dimension.
3 Team Member Indicator 12/13/12 16:38 12/13/12 16:38 Started processing the 'Team Member Indicator' dimension.
4 Team Member Indicator 12/13/12 16:38 12/13/12 16:38 Started processing the 'Team Member Indicator' dimension.
5 PAC SC Super Type 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'PAC SC Super Type' attribute.
6 PAC SC Super Type 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'PAC SC Super Type' attribute.
7 Specialist Merger Indicator 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'Specialist Merger Indicator' attribute.
8 Specialist Merger Indicator 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'Specialist Merger Indicator' attribute.
9 YearlyReview 12/13/12 16:38 12/13/12 16:38 Started processing the 'YearlyReview' dimension.
10 YearlyReview 12/13/12 16:38 12/13/12 16:38 Started processing the 'YearlyReview' dimension.
11 PAC SC Repeat Caller 12/13/12 16:38 12/13/12 16:38 Started processing the 'PAC SC Repeat Caller' dimension.
12 PAC SC Repeat Caller 12/13/12 16:38 12/13/12 16:38 Started processing the 'PAC SC Repeat Caller' dimension.
13 Year 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'Year' attribute.
14 Year 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'Year' attribute.
15 Staffing Function 12/13/12 16:38 12/13/12 16:38 Started processing the 'Staffing Function' dimension.
16 Staffing Function 12/13/12 16:38 12/13/12 16:38 Started processing the 'Staffing Function' dimension.
17 PAC SC Repeat Caller 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'PAC SC Repeat Caller' attribute.
18 PAC SC Repeat Caller 12/13/12 16:38 12/13/12 16:38 Started reading data for the 'PAC SC Repeat Caller' attribute.
19 PAC HV Cust 12/13/12 16:38 12/13/12 16:38 Started processing the 'PAC HV Cust' dimension.
20 PAC HV Cust 12/13/12 16:38 12/13/12 16:38 Started processing the 'PAC HV Cust' dimension. -
How to upgrade the extended web application for FBA from MOSS 2007 to SharePoint 2010?
Hi All,
Currently my farm version is MOSS 2007 with SP3.
I have a web application on port 80, and is based on windows authentication, and i extend it on the port 90, and the authentication is FBA with SqlServer.
I know that SharePoint 2010 has a new claims based authentication, and in a single web application you can do both windows authentication and FBA.
Now i want to know, when i migrate the MOSS 2007 port 80 and port 90, which method should i choose?
1. in SharePoint 2010 farm, Create a classic based web application on port 80, and extend it on port 90, enable FBA on port 90. It is the same as MOSS 2007.
2. in SharePoint 2010 farm, Create a claims based web application, and enable both windows authentication and FBA.
Thanks.FBA requires claims so you'll need to create a claims based web application. Whilst you might extend the site to give you a FBA portal the web application itself will have to be claims based.
I would definitely be looking at using a database attach upgrade path in your case to give you the opportunity for testing as moving between authentication providers can be painful. -
im buy new iphone 4 at singapore and then i go back to my country indonesia, and after few months my iphone had trouble, the screen blank and no electric appears, i try to recharge but nothing happen, so i try to contact authorized service in jakarta, but they ignore my
i already register my iphone 4 at the internet and there is global service, why they don't accept my service request
this is my apple serial no : 7U04326EA4S
and these the authorized service that ignore me
iBox Service Center
Menteng Central Jl. HOS Cokroaminoto 78 (sebelah Satay House), Menteng, Jakarta Pusat
10270
Telephone: 6221-3900194, 6221-3908194
INDONESIAThat is because the iPhone warranty is country specific. You will need to return to Singapore, or send it to someone you know there, to get it serviced.
-
HT1386 How to get the newest iTunes update for iPhone 3gs -not available?
I am not able to get the latest update and it is effecting what apps I can use now and or download to my iphone. Is there a way to upgrade on my 3gs?
JLaDage1 wrote:
Or am I just stuck with the 6.1.6
Correct. Apple has discontinued the 3GS, & the fact is it does not possess the hardware to run iOS 7.0 or higher. -
Technical support for Designer?
Open question for Adobe employees (I know you guys/gals read this - you are posting in other threads...): Who is providing technical support for Livecycle Designer?
After moving from the Flex community to the Livecycle community I get the sense that a few of the supporting applications for Livecycle are suffering "abandonment" issues. The UI's feel very "last gen" and basic features just are missing or just dont work properly. Getting any sort of technical support or product development roadmap just seems to not exist. Integration with many aspects are just plain clunky (ever tried creating custom guides with Flex for Livecycle?)
Is there any official response from Adobe on where this product is headed? Developer Blogs? Anything?Who is providing technical support for Livecycle Designer?
The official technical support for organizations paying for support is Adobe Customer Support. If your organization has a support contract with Adobe and you encounter product failures or bugs, contact support http://www.adobe.com/support/livecycle/ and open a service request.
This forum and other user forums like it are the unofficial support vehicles for the user community to share their problems and solutions. Many Adobe employees and partners voluntarily monitor the forum and provide as much assistance as they can. Adobe employees are not required to contribute to the forum. They do so out of interest for the community and to enable those with less experience and knowledge to utilize the technology as it was intended. The same is true for many non-employees who actively support the forum.
Is there any official response from Adobe on where this product is headed?
If you have specific product concerns you should contact your Adobe sales representative or partner.
Developer Blogs? Anything?
Here is partial list of pertinent URLs:
Adobe Blogs - http://blogs.adobe.com/adobe-com-blogs
FormFeed (John Brinkman on form design) - http://blogs.adobe.com/formfeed/
LiveCycle Product Blog - http://blogs.adobe.com/livecycle/
Adobe Solution Partner Program - http://blogs.adobe.com/solutionpartners/
LiveCycle Developer Center - http://www.adobe.com/devnet/livecycle.html
Adobe Enterprise Café - http://www.adobe.com/devnet/enterprise/cafe.html
Adobe Enterprise Developer Program - http://www.adobe.com/devnet/aedp.html
Steve -
i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank youRun the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium -
How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info
Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh -
I have purchased my apple iPhone 5 from Germany, and now I am back to India. I need to contact the German apple support team for queries related my device. How to contact the apple support team in Germany from India ?
Warranty and support is only valid in the country of origin, or in the case of a device purchased in an EU country, only in an EU country.
Unless you will be visiting an Apple store in one of the EU countries before the warranty expires, you are pretty much out of luck.
FYI, the Contact Us link at the bottom of the page provides the appropriate contact information for Apple. -
Good Morning,
We are getting this error
Outlook Web Access is currently unavailable. If the problem continues, contact technical support for your organization and tell them the following: No Client Access servers
of the appropriate version can be accessed from the Internet
We installed a new Exchange 2007 CAS on Windows 2008R2. Got rid of old CAS on Exchange 2007. Now seeing this error. Does anyone have an idea??Hi,
If the issue persists, I recommend you install Exchange 2007 SP3 RU7 and check the result. Also, ensure that Exchange 2010 SP2 RU1 or later version is installed. Old Exchange version may lead to the CAS-to-CAS proxy incompatibility.
What's more, here are some helpful blogs for your reference.
Exchange 2010 SP2 RU1 and CAS-to-CAS Proxy Incompatibility
http://blogs.technet.com/b/exchange/archive/2012/02/17/exchange-2010-sp2-ru1-and-cas-to-cas-proxy-incompatibility.aspx
OWA Coexistence With Legacy Versions
http://blogs.technet.com/b/sjimmie/archive/2010/07/09/owa-coexistence-with-legacy-versions.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
How Do I Get Technical Support for my S10-3T?
My battery is taking over five hours to charge up, and the charge doesn't last. I have a problem.
I have just spent a terribly frustrating hour, trying to find out how to get technical support for this computer. First off, I cannot find a telephone number on the Lenovo site.
Well, O.K. I tried to get on-line technical support. It says I need to have a 7 digit model number. Well, I don't seem to have a 7 digit model number. I have an S10-3t computer that has a four digit model name, a serial number, and a 10 digit "MO" number, whatever this is.
Can somebody please tell me how to contact a Lenovo human being to find out how to resolve my problem?
Solved!
Go to Solution.Hi , sounds that your battery is defective..
S10-3t Model Type 0651-37U for example thats 7 Digits
http://consumersupport.lenovo.com/ot/en/htmls/1224740365419.html
and in BIOS on Infopage you can found the 7 digit ... , when you have installed Lenovo Toolbox ....
Support in US
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1 -
I forgot the security question and did not reach me any e-mail from an email technical support for the alternative I hope to help
Alternatives for Help Resetting Security Questions and/or Rescue Mail
1. If you have a valid rescue email address, then use this procedure:
Rescue email address and how to reset Apple ID security questions.
2. Fill out and submit this form. Select the topic, Account Security. You must
have a Rescue Email to use this option.
3. This is the only option if you do not already have a valid Rescue Email.
These are telephone numbers for contacting Apple Support in your country.
Apple ID- Contacting Apple for help with Apple ID account security. Select
the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
Apple ID- All about Apple ID security questions.
Maybe you are looking for
-
Cannot save jpg files in outlook express
Is there a problem sending a jpg file from Apple mail to outlook express? People I am sending to say they can see the photo, but cannot save the file.
-
IPhoto books - number of pages?
I am doing an iBook and need help as follows: 1. how many pages can I have in a hard cover book? 2. how much does it cost???? How much per added page? 3. how can I add pictures from other albums? I seem to nly have a very limited selection where
-
I migrated to a new macbook and my InDesign will not start - other prorams do.
-
Two hours still can't scan with photoshop cs6
two hours still can't scan with photoshop cs6 any ideas?
-
Plz, can any one tell me If there is any program that I can desgin a network with Routers and switches, and make simulation on it to test and see the result and thanks