How to control a camera wriggle?

Hi there,
I have used basic camera wriggle in various Motion projects and adjusted them to my liking. However, I have one project where the wriggle starts up and when it ends, there is a fairly noticable "jump" back to where the camera should be. I wouldn't say the wriggle is anymore intense than what I've been doing previously. I've never had this trouble before, so don't know what settigns I should be changing to correct this. So far I've had no luck. Any ideas?
Thanks for your time.

Instead of trimming the Wriggle parameter behavior to make it end, have it last the full duration and keyframe it's strength or some other parameter down to zero to stop it.

Similar Messages

  • How to control Integrated camera of PDA

    HI
    I got HP IPAQ smart phone, my goal is to get the images from integrated camera using J2ME program.I am new to J2ME programming, I have been searching for approaches to get the image .
    Please kindly suggest me the possible ways to acquire image from cam,
    Thank you

    Just another cross poster.
    [http://www.java-forums.org/cldc-midp/17186-please-help-me-accessing-integrated-camera-pda.html]
    db

  • How to control Isight from a remote location?

    Please help!
    I need to control the Isight camera conected to a mini mac using a G5 from a diferent location.
    I can control my mini mac thru Apple remote desktop fine, but I have no Idea how to control the camera intalled on the mini mac.
    I want to use the camara Isight on the mini mac to monitoring the place.
    Mini Mac   Mac OS X (10.4.7)   G 5

    Hi Robson54!
    Welcome to Apple Discussions!
    Check out EvoCam: http://www.evological.com/
    It may be what you are looking for!
    Let us know how it works out!

  • How to access SPECIFIC camera attributes tree (camera controls) located in MAX with Labview?

    How to access specific camera attributes tree (camera controls) located in MAX with Labview?
    I want to be able to access frame, trigger and grab properties. Does anyone know?
    Thanks.
    /Peter

    Please see this related thread http://forums.ni.com/t5/LabVIEW/IMAQdr-Property-Node/m-p/1642950/highlight/false#M590168
    Matt
    Product Owner - NI Community
    National Instruments

  • How to control and display video from IP camera using ActiveX control over Internet.

    Hello,
    I need to control my IP cameras over the internet. I need to log into the cameras and then display the video.  There's an ActiveX control registered on the computer and works fine with IE to access and control the cameras. Controlling the cameras using IE works fairly well, but there are some quirks that I'd like to eliminate by using my own custom code.
    Has anyone created a vi that controls a Foscam FI8905W over the Internet? I’ve attempted, but I keep getting a catastrophic failure when I try to call ManagementConnect Method in the DVM_IPCam2 ActiveX Control Module V1.0. I'm not sure whether I need to establish an IP connection with the cameras first, or allow the ActiveX control to establish it for me.
    Some example code would be greatly appreciated. Running LabVIEW 2011 on a Win7 32bit.  Even some code used to control a similar device using ActiveX over Internet would be helpful.

    I have an example vi for interfacing to the foscam activex.
    I plan on using mouse click events within the activex window to trigger the PT function.
    I only have the basic up/down/right/left directions and not the down-right/down-left/up-right/up-left in the enum.  You can load the camera's web page and view the source to see the Java script code that uses the activex control.  There are definitions for the other directions.
    I had to mark the control as "Disabled" to keep click events from going to the activex control.  If I double click the control, it goes full screen.  If I then click on it to get out of full screen mode the video never returns or returns to the wrong spot in the VI.
    Attachments:
    Foscam Demo.vi ‏24 KB

  • How To Disable Music Controls and Camera Icon On Lock Screen?

    Good Afternoon / Evening -
    I have an iPhone 4 running iOS5. 
    I would like to disable the Music Controls and Camera icon that appear on the lock screen.  Is there a way to do this?  I believe this new functionality is causing battery issus with my iPhone 4.
    Any advice / information is appreciated!
    Thanks,
    Rick

    rockmyplimsoul wrote:
    RPPonti wrote:
    I would like to disable the Music Controls and Camera icon that appear on the lock screen.  Is there a way to do this?  I believe this new functionality is causing battery issus with my iPhone 4.
    No, this feature is built into iOS 5 and can't be altered.
    The only way this could cause a battery issue though is if you accidentally double-tap the Home button and then also tap either the Play button to start music or the Camera icon to launch the camera app. Not impossible, but not likely either.  Battery issues might be improved through a reset or complete iPhone restore.
    I Have an iPhone 5 & the music keeps getting activated when its in my pocket.. i actually have to take it out of my pocket if im moving aroung.. or in a meeting.. its SO Annoying.. my first iPhone.. and im blown away that even on the LOCK screen.. you cant lock the features on the phone.. does this sound like a third grader designed this thing or what.. why have a lock screen??? IF it Doesn't lock??????
    I can only pray that this issue is resolved soon.. otherwise this is my last & only iPhone.. what a piece of junk! & a huge waste of money... all these stupid 'apps' & games.. seem to be the priority.. & its still incable of being transported in my pocket without playing music & taking pictures..***
    ANY HELP would be greatly appreciated!

  • Once upon a time, I shun down the camera(built-in isight) on my Imac, now I don't know how to restart the camera.

    I can see the built-in iSight at the device manager, and its property is "normal". But how can I get it work again?

    From apple help:
    Using your Mac’s built-in camera
    If your Mac computer or display has a built-in iSight, FaceTime, or FaceTime HD camera, you can use it to take pictures or videos with the Photo Booth application, create movies with iMovie, or video chat with your friends and family over the Internet.
    The microphone (see A above) transmits and records sound. The location of the microphone may vary depending upon your computer model. The camera (see B above) takes pictures in Photo Booth or captures video in iChat or iMovie. The indicator light (see C above) glows when the camera is on.
    To turn off the camera, close the active application window. The green indicator light turns off, showing that the camera is off and video has stopped.
    So open the application you want to use the camera with. The program will control the camera. TRY: Open PhotoBooth. Click the red button. Watch for the green light next to the lens (C above)

  • IMovieHD controls Sony camera, but no video/audio on Mac!

    Yup! I can Play, FFW, RWD the tape on my camera by clicking on the control buttons within the iMovie HD interface, the camera will show the video and play audio, but the monitor will remain blue on my Mac. Clicking on Import does absolutely nothing. If later I go to check the Media folder inside the 'My Great Movie' package, it will contain 243 (yes, always 243) Zero KB .dv files.
    I installed iMovie HD on my B/W G3 using Pacifist, and was able to import my tapes onto the hard disk. So, it's not the camera or cable. Is it my Powerbook, or is it the iMovie HD installation on it that is at fault? And, more importantly, how do I go about fixing it?
    The G3 is running 10.4.2.
    Many thanks, people.

    Hi Alex:
    If you still do not have this fixed-do the following:
    First-if your camera can control the camera but not see the video,
    *Open Garageband
    *Play a note or two
    *Close Garageband
    *Open iMovie
    The camera will work now-REALLY!! (It resets your Audio-Midi)
    If not, look here:
    http://docs.info.apple.com/article.html?artnum=43000
    Sue

  • IPhone 4S photos on the info tab of iPhoto are 3,1Mpx. How I change the camera to 8Mpx?

    iPhone 4S photos on the info tab of iPhoto are 3,1Mpx. How I change the camera to 8Mpx?

    Zoom out.
    There are not settings to control the image quality, the device always takes the largest image possible.  Zooming in will cause the image to be a lower resolution.

  • HOW TO CONTROL ON CREATION OF SALES ORDER WITH REFERENCE TO EARLIER SO?

    Dear All,
    I want to contol on creation of Sales order with reference to earlier SO?  While creation of sales order our enduser are creating sales order with reference to earlier month SO which I want to restrict. Recently I made changes in sales order like payment terms is grayed, system will atomatically pick pay terms from customer master.Now I am getting correct data also but enduser is using old SO no while creating new SO and old payment data is reflecting in fbl5n.
    I want to restrict enduser while creating new SO with ref. to old SO. Only for returns they should be able to use Billing refrence. Pl. suggest how to control the with reference to ealier SO.
    Nikhil

    Nikhil Deshpande,
          If you dont want allow create a sales order in referent to other one, just delete the copy control between these sales order type, so when the user tries to create a SO in reference to other one a message is displayed that is not possible.
    Thanks,
    Mariano.

  • CRM Web UI :- How to Control number of session of Web UI for a user

    Hello Experts,
    We do have very specific requirement which SAP doesn`t recommend in terms of multi-sessioning for a user.So we are little worried upon the challeges.Could you please share your ideas/Experience on following?
    1.How to Control number of Internet explorer session for the web UI (may be 2 or 3).?
      Though SAP doesn`t recommned more than one but our client requires 2 or more than that but we need to fix it either 
      2 or 3.
      So we are looking for specific setting for this.
    2.What are the challenges we need to face if we implement option 1?
    3.Specially in interaction record management
        a. Is there chance of loosing the data if agent has opened more than two session.
        b. In which session interaction record data will get stored,the one on which agent picked up the call or in the latest 
            one?
    Please let me know if I am not clear enough on any point.
    Thanks in advance,
    Shailendra Tolambiya

    Hi Shailendra,
    The following wiki page might be useful in this respect:
    http://wiki.sdn.sap.com/wiki/x/gxdKDQ
    Best Regards,
    Shiromani

  • How to connect my camera on mac book?

    how to connect my camera on my mac book?

    Usually an appropriate cable, and other items are
    included in the retail box a camera arrived in, so
    there should be instructions by that manufacturer
    to most suitably attach the camera to a Mac or PC.
    Usually the computer will automatically detect the
    camera when attached by USB cable; the Mac will
    offer to use iPhoto or another application, to view
    and handle image processing; or you could choose
    to select a different application, or none at all.
    For my Macs and two cameras, I do not have iPhoto
    handle the images and I choose third-party software
    because I don't make libraries of images in the Mac.
    However depending on the computer and the camera
    the Mac may already have sufficient drivers already
    installed; so a software installation from a CD from the
    camera maker may not be needed in order to use it.
    Since your question is rather wide and gives no info
    as to what you have, the replies are also generalized.
    Good luck & happy computing!

  • How to control my MacBook Pro with my iPhone ?

    I do wanna know how to control my Macbook pro just with my iPhone, please

    If you mean copy files from one to the other you can connect the two via firewire cable and boot one into Target Disk Mode.

  • How to control follow up doc for  Activities

    Hi...
    I have created 10 different types of Activitiy Doc. When I open any activity in crmd_order I'm getting all other activities as follow up docs(when I click on follow up icon). I dont want all of them, may be I need one or two out of those. How to control those can anyone have idea
    Regards,
    Ajay

    Hi,
    Check the copy control for transactions in
    spro-->Customer Relationship Management->Transactions->Basic Settings->Copying Control for Business Transactions->Define Copying Control for Transaction Types
    If the transactions are maintained as follow up for the transaction you have created then remove the entries which you dont want as follow up.
    Reward points if it helps.
    Shridhar

  • How to control DE USB disk Automounts.

    Hi,
    Can someone please guide me as to how to 'control' Automounts by DE when we plug USB disk drives.
    I have KDE4 on my Arch system. When I connect a pen drive/USB HDD which is formatted as vfat/NTFS, the system(or KDE) 'Automounts' it in /media and I have read/write access to it. But if I use the same drive and format it as ext4, it wont be mounted as read/write for normal users but only for root.
    Now pen drives and USB HDD's are removable storage drives and hence are volatile and could not have a fixed mount point, so it cannot be mounted by putting an entry in fstab or could they?. And I need my USB HDD frequently, and manually mounting it through CLI everytime and working on it as root is a bad idea i guess.
    I am posting this because m confused as to how to control this Automount feature-What is the backend to it? Because I've read that HAL no longer takes care of it and that HAL will be deprecated soon, instead UDEV takes care of it. If that is the case then should I be concerned about polkit? Because that is what's the output provided by Dolphin(freedesktop.org policy prevented blah blah).
    Another thing is if HAL is still in use and Automounts my devices then is it independent or polkit is a part of it. Then, is using hal-easy an option or replacement to standard HAL. ??!!??
    I tried HAL archwiki and used the code to give a user permission to give rw access to automounted ext filesystems, but then nothing is mounted, it sings the same old freedesktop.org prevented bla blah song. And I think this is a question for all linuxes using Gnome and KDE in general.
    Any help is appreciated.

    If by 'ability to mount as user' you mean to mount it manually but read/write access to normal users then yes. But primarily I need automounting as user, also be able to give access to other users for read/write et filesystem automounts.
    Last edited by kapz (2009-11-17 01:12:56)

Maybe you are looking for