How to control a mac mini 10.4 from a mbp 10.5 over a wireless network

Can I access the screen of a 10.4.11 mac mini ppc from my macbook pro 10.5.6 and control it/check mail on it etc over a home wireless network? I have tried turning on windows sharing on the mac mini, but still can't access it from the mbp - I've tried searching in discussions without much success - is there a thread I should have found?

I searched for info on chicken of the vnc and found this site http://www.wikihow.com/Setup-VNC-on-Mac-OS-X
I did what it said and it worked fine. Chicken of the vnc worked quicker than jollyfastvnc in a quick comparison.

Similar Messages

How can I control a mac mini connected to a benchmark dac 2 for the purpose of listening to 24/192 audio files?

How can I control a mac mini connected by USB to a Benchmark DAC 2 for the purpose of listening to 24/192 music downloads?

Hello,
About the dac 1, but may apply to the dac 2 as well in some ways...
Here are more details:
1) The current version of iTunes (7.5) for OSX is very broken. Some older versions work properly, but 7.5 introduces truncation and DSP artifacts that can measure as high as –80dBFS. These levels are easily audible. There is no system configuration that will permit transparent playback from 44.1kHz sources with iTunes 7.5. Curiously, the only format that works properly in 7.5 is 24-bit/96kHz. This iTunes problem has nothing to do with USB communications, as the results are the same when using the built-in optical port on our PowerBooks. As a workaround, we suggest using the free VLC for Mac player. VLC works perfectly with all formats (provided OSX is set to match the sample rate of the files being played). We highly recommend the VLC player for OSX users, and strongly advise against using iTunes. We will attempt to identify which versions of iTunes work and which ones don't. But beware, iTunes updates itself without user intervention. One of our test computers "upgraded" itself to the dysfunctional iTunes 7.5.
2) OSX still does not have the ability to follow sample-rate changes. We consider this a nuisance for most users and a show-stopper for users who want to play a mixed list of 44.1kHz and 96kHz material. An OSX sample-rate mismatch will invoke the very-poor-quality sample-rate conversion that is built into OSX. The iTunes 7.5 bug seems to be locking on this sample-rate conversion at all sample rates other than 96kHz. Until this is fixed, OSX is not the operating system of choice for audio playback.
http://www.stereophile.com/content/benchmark-dac1-usb-da-processor-headphone-amp lifier-manufacturer-comment

How do I get my apple TV remote to stop controlling my Mac mini?

Just made the switch from PC to Mac. I love our new Macs, however our apple TV remote is driving me up the wall. It keeps controling my Mac mini. Our I tunes goes crazy on the mini when we are trying to put movies on the apple TV. Can anyone help?

Go to Sysem Preferences>Security and Privacy>Privacy>Click and unlock in lower lect and then click on Advanced>Check box that says Disable remote.

Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

Look up "screen sharing" in help
You can control your mini (which I am assuming you are hooking to your TV) complete from your iMac.
After you set up screen sharing, you can go to the finder, under the "go" menu choose "Connect to server" and then browse. Choose your mac mini's name, and look for the "Screen Sharing" button.
Choose Apple menu > System Preferences, and then click Sharing.
Select the Screen Sharing checkbox.
To specify who can share your screen, select one of the following:
All users:
Select this if you want to allow any user with a user account on your computer to share your screen.
Only these users:
Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Users & Groups preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list, and then click Select.
Click Computer Settings and set the following options:
Anyone may request permission to control screen:
Select this to allow anyone on your network to request to share your screen.
VNC viewers may control screen with password:
Select this and enter a password that VNC viewer applications can enter in order to control your screen.It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.

HT1444 As an obvious novice I want to know how to upgrade my mac mini OSx 10.4 to a newer system can anyone help?

As obvious novice I want to know how to upgrade my mac mini 10.4 OS X to a more uptodate system

At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Machine Name:          Mac mini
Machine Model:          PowerMac10,1
CPU Type:          PowerPC G4 (1.2)
Number Of CPUs:          1
CPU Speed:          1.42 GHz
L2 Cache (per CPU):          512 KB
Memory:          512 MB
Bus Speed:          167 MHz
Boot ROM Version:          4.8.9f1

How can I get Mac Mini to accept bootable installers for Mountain Lion ? They work fine on MB-Pro

I've had a Mac Mini (late 2012) for the past week and need to do a complete reinstall to get rid of very mucked up Server.app settings that I can't get rid of even though I uninstalled Server.app and what I thought were all of its Library files. I need to get the Mac Mini back to pristine, factory default to start over. Then I'll be able to put Server.app into a VM so I can trash it if need be without mucking up the rest of my system.
I have both a bootable recovery partition on an external hard drive (My Book firewire) and a USB bootable installer with a fresh edition of Mountain Lion. I know the USB installer works just fine because I used it to do a clean install of my MacBook-Pro just last night. Went like a charm.
When I start up the Mac Mini with the option key held down, everything seems fine -- I see both the USB drive and the My Book's 2 volumes (1 for data, 1 for the Recovery partition). But when I select either the USB drive or the My Book Recovery partition as the start-up drive, I get a screen with a circle with a line across (the no-entry traffic sign), with no way to go back or forward. So the computer has to be rebooted.
Any suggestions as to how to get the Mac Mini to recognize bootable installers that MacBooks are able to see?

Late 2012 Mac mini uses a special Mountain Lion version that it's only compatible with this Mac and you can only get on Internet Recovery because it's not available in the App Store. If you want to reinstall Mountain Lion, press Command, Option and R keys while your computer is starting

How old is my Mac mini

How old is my Mac mini?
Here is the info from the 'about this mac' button:
Model Name:          Mac mini
Model Identifier:          Macmini2,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          1.83 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          2 MB
Memory:          1 GB
Bus Speed:          667 MHz
Boot ROM Version:          MM21.009A.B00
SMC Version (system):          1.19f2
Serial Number (system):          YM8414TLYL1
Hardware UUID:          00000000-0000-1000-8000-001FF345C86D

OVERVIEW
Introduced     August 2007
Discontinued     March 2009
Model Identifier     Macmini2,1
Model Number     A1176

Someone who can say how to get Adpbe flash player version 11.2.202.197 to work together with Lion on mac mini. Support from Apple can obviously not help the problem and do not care if it works

Someone who can say how to get Adpbe flash player version 11.2.202.197 to work together with Lion on mac mini. Support from Apple can obviously not help the problem and do not care if it works

Adobe flash player version 11.2.202.197 is for Windows Vista / Windows 7 / Vista 64 / Windows 7 64
Adobe Flash Player version 11.1.102.55 is the current version for Snow Leopard and Lion.
Adobe - Install Adobe Flash Player

How to clone 40 mac mini at the same time using network clone (like Ghost)

how to clone 40 mac mini at the same time using network clone (like Ghost)
Any Ideas ?
Thanks

Rather than a 100% identical clone to 40 Macs, I suspect you want the same basic image to be loaded on to those 40 Macs but will require some individualisation so that for example each has a unique computer name.
NetRestore and System Imaging Utility can do this but a lot of people including myself prefer to use DeployStudio which has more capabilities. See http://www.deploystudio.com
DeployStudio can be used to like NetRestore to restore an image to multiple Macs at the same time which is like multiple people downloading at the same time, but it can unlike the standard NetRestore also be configured to use multicast traffic which is more like a TV broadcast whereby multiple people receive the same transmission at the same time. This can be more efficient for imaging larger numbers of computers at the same time. For example 1Gbps shared between 40 computers is only 25.6Mbps each, but if you multicast a single transmission of 100Mbps to 40 computers then all 40 can listen to it at the same time and still be receiving 100Mbps even on the same network connection.

I don't understand how much memory a mac mini has please help!

I feel really stupid asking this, but I can't understand how much memory a Mac Mini has...
512MB of 667MHz DDR2 SDRAM (PC2-5300), supports up to 2GB
I hope that doesn't mean it only holds 2GB...but I don't know.
PLEASE HELP ME! I need to get a Mac soon before my PC dies again.
Mac Mini

Hi opera_rocker
I think that you may have found yourself in a little bit of a pickle regarding technical hardware terms, so I'll try and clear things up for you.
The Mac Mini comes as standard with 512MB of RAM (Read Only Memory). RAM is a little stick that is built into the computer that supplies the software with all the virtual memory that it needs to accomplish tasks. The more RAM that you have in your computer, the faster software will run, and the more things you can have going on at the same time. You never actualy use RAM for personal files and folders. The Mac Mini will accept a total of 2GB of RAM, which comes as an optional upgrade from Apple, however, 1GB is more than adequate.
All of your files and folders are kept on your hard drive, like that in your 30GB iPod. Everything that you use on your computer, whether it be Word Processing software, or Games for example, are stored on the hard drive. The Mac Mini can come with either a 60GB, or 80GB Hard Drive depending on which model you decide to buy. That's plenty more space than you have on your actual iPod and you will most probably never seem to run out of room!
Hope that I may have been of help!
-Pos
Message was edited by: Pos

What is the best way to control a mac mini with iphone 4s , prefer blue tooth

Hi
what is the best way to control a mac mini with iphone 4s , prefer blue tooth, or I can use the syncing cable as well. but no wifi.
Basically to lanch an app and load a preset for that app.
Thank you

As V.K. noted, check out NetRestore's documentation http://www.bombich.com/software/docs/netrestore/English/index.html or visit the fourms at http://forums.bombich.com/

How stable is the mac mini as a server?

Hi List,
I am planning to get the mac mini with snow leopard server.
Has anyone tried it?
How stable is the mac mini as a server?
I'd be setting it up for 10 mac clients.
It will be used as a file/print/dhcp server.
thanks.
Dp

max out the memory to reduce / eliminate paging. although you might not need to in your situation. I think printing is a light use of memory. Inkjet printers are heavy on the cpu.
electronics don't usually fail. It's the moving parts. Doesn't the mini take the 2.5 inch drives that are not as reliable as the 3.5? An external drive will get past this.
You could get an external bootable harddrive.
You need an external Firewire drive to boot a PowerPC Mac computer.
I recommend you do a google search on any external harddrive you are looking at.
I bought a low cost external drive enclosure. When I started having trouble with it, I did a google search and found a lot of complaints about the drive enclosure. I ended up buying a new drive enclosure. On my second go around, I decided to buy a drive enclosure with a good history of working with Macs. The chip set seems to be the key ingredient. The Oxford line of chips seems to be good. I got the Oxford 911.
The latest the hard drive enclosures support the newer serial ata drives. The drive and closure that I list supports only older parallel ata.
Has everything interface:
FireWire 800/400 + USB2, + eSATA 'Quad Interface'
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATAFW800_FW400USB
Here is an external hd enclosure.
http://eshop.macsales.com/item/Other%20World%20Computing/MEFW91UAL1K/
Here is what one contributor recommended:
http://discussions.apple.com/message.jspa?messageID=10452917#10452917
Folks in these Mac forums recommend LaCie, OWC or G-Tech.
Here is a list of recommended drives:
http://discussions.apple.com/thread.jspa?messageID=5564509#5564509
FireWire compared to USB. You will find that FireWire 400 is faster than USB 2.0 when used for a external harddrive connection.
http://en.wikipedia.org/wiki/UniversalSerial_Bus#USB_compared_toFireWire
http://www23.tomshardware.com/storageexternal.html
Here are two utilities for making a complete backup of your internal hard drive. I've recommend using one of these so that you can create a bootable system on your external hard drive. ( PPC require a firewire connected drive. ) Once created, you can run your system from the external drive. Hold down the option key on your keyboard then power on your machine. This will bring you in startup manager click on the drive image you wish to boot then click on the arrow key to the right.
"Clone, synchronize, backup. Schedule and forget it."
http://www.bombich.com/software/ccc.html
"SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless."
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
Robert

HT1338 how much is the mac mini A1347,i7,4GB RAM,1TB hard drive ?? and wat maximum upgrading for the ram ? thannks :D

how much is the mac mini A1347,i7,4GB RAM,1TB hard drive ?? and wat maximum upgrading for the ram ? thannks

go to Apples website and look. That's what anyone else here would do.

How good is the mac mini

hello
I am planning to buy a mac
How goof is a mac mini with 2gh processor/ 2gb ram
for applications and leopard os or any future os ?
also will it work well with a full hd 24 inch display?
I think of a mac mini , i wanted an imac
but maybe better a mac mini / a full hd 24 inch screen
and a playstation 3 with the screen on the top
for gaming and blue ray ... i am thinking
so if mac mini would work well with photo editing etc
and leopard would run fast and smooth on it , i would go for my trio
mthx
Message was edited by: anteros27
Message was edited by: anteros27

In a broad sense it's probably best to think of the mini as a full desktop computer, simply shrunk down to a small size - that way you'll get the idea of how good it is rather than risk the impression that it's small size is in any real way indicative of it's performance. It isn't.
The new 2.0GHz mini is very close in performance to the original dual processor G5 computer (advertised as the fastest desktop on earth when it was released in 2003). Leaving aside the advertising hype, it was (and remains) an incredibly powerful system in very extensive use in video, image and publishing industries. Given the mini has as much raw power, just a slower hard drive and no internal expansion options, you can see that it is, in it's own right, a very capable system.
Just how capable depends a lot on the specific uses you have in mind for it of course. It'll cope well with all the normal computing tasks people typically run - word processing, internet, email, photos, etc, and would be suited to a lot of far more intensive tasks, including image editing work. Gaming is a bit suspect though, with the limitations of the on-board video sub-system making some games run well and others less so.
There should be absolutely no problem with Leopard when it is released, though of course it isn't possible to give a definitive statement on it since as yet Leopard is still in development. However, at this time developer builds are being run on existing minis of lower specification, and historically Apple have typically ensured new OS versions are backwards compatible with older hardware platforms - certainly recent ones. Given the newly updated mini has just been announced and is likely to remain on sale for some time as a result without further change, and Leopard is due in a couple of months, it in highly improbable the mini won't run it, and run it well.
It will drive a 24" display since the maximum resolution of the mini is 1920x1200 (DVI) or 2048x1536 (VGA).

Caught in a conundrum while trying to upgrade a Mac Mini (mid 2010) from Snow Leopard to Mountain Lion

Hi gang,
I am in a very frustrating position as I try to upgrade my Mac Mini (mid 2010) from OS X 10.6.8 Snow Leopard to whatever the latest version of Mountain lion is. The reason I am doing this is because the original hard drive died and the Mini sat there for 6 months before we decided to get a new hard drive and revive it.
I installed a new 500GB 7200rpm SATA drive and the problems began.
First I couldn't get Mountain Lion installed as a fresh OS installation (using both a USB drive and a DVD to no avail). It just wouldn't go. The grey Apple logo/loading screen would come up and just sit there doing nothing while the loading icon spun.
I then tried installing Snow Leopard (the OS that the Mini came with when it was new). After some messing around, that got done.
However, a peculiar thing happens when the Mini boots. Everything loads up into Snow Leopard, but although the mouse curser moves, I cannot click on anything or use the keyboard for 4-5 minutes. Then it just work (I am typing this on the Mini). This happens every time.
Now, when I updated to 10.6.8, I was able to load up the App Store and download the Mountain Lion install app. I clicked it and went through the initial copying of files and then the restart, but after the reboot, the grey loading screen would not progress. I rebooted again and held down the Option key to check out the available boot volumes, and all I saw was the installation DVD I had in there for Snow Leopard and a hard disk volume called "Mac OS X Installer."
So I booted into the Snow Leopard install DVD and opened Disk Utility to check things out. I did a verify disk and a permissions repair. Interestingly, the first repair I did gave me the message that the ACL was missing from Volumes and that is was fixed. I read something somewhere which talked about the Access Control List and mouse/keyboard issues. But who knows. When I boot back into the Mini as normal I am returned to the fully-functioning Snow Leopard installation, like nothing happened.
And now here is the kicker: it appears that the Firewire bus is hooped. In the Profiler, when I view the FireWire settings I get the message, "Warning: Unable to list FireWire devices." So I am pretty sure the one thing I cannot do is boot the Mini into target disk mode attached to my Mac Pro and installed Mountain Lion that way.
So to recap: I can't finish the Mountain Lion installation because the install won't continue after rebooting because there is something wrong with the underlying base system, which might be hardware (FW bus) related. I think.
Some things I have tried:
Resetting the SMC
Resetting the PRAM
Reparing permissions
Booting into Safe Mode (doesn't work)
Booting into Verbose Mode to observe what happens (I get the "Can't load the Bootcache.playlist" error, which I suspect is related to the screwed up FW bus)
Trying to boot using Internet Recovery (doesn't work)
Booting into Single User Mode and attempting the "fsck -y" etc. sequence to try and repair the ACL that way
So I am stuck.
I guess the question is, should I get an external HD enclosure and install Mountain Lion onto the hard drive that way and hope it works when I put it back into the Mini?
Any other ideas? I have spent a couple days ******* around with this is am running out of ideas...
Any advice would be appreciated!

Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

How to control a mac mini 10.4 from a mbp 10.5 over a wireless network

Similar Messages

Maybe you are looking for