How to control Bank Account Number Length based on different countries?

Using eBs 11.5.10
We noticed that the bank account number when updated in under a bank within Austria pads extra zeroes in the beginning to ensure length is always 11. However, this padding of zeroes does not occur in a bank within United Kingdom.
This leads to believe, there is some possible configurable setup that controls this validation. Please advise, where this setup is and if its configurable.
Thanks.

Hi Mahesh,
If it is 19 for china then check with sap service market place or any sap notes available, otherwise you need to change the length and also you need to analyse the impact of changes in the system.

Similar Messages

  • Bank Account Number length

    Hi All,
    I need to update a bank account number in transaction FI12. Reducing the number of digits from 11 to 10 digits, but every time I do it I got the error message:
    Bank account number or bank number are not of valid length - AR212.
    I already made some tests in transaction OY17 changing some country specific  checks, but I still get the same error message.
    Does anybody has an idea what the problem can be?
    I already delete the bank account and try to recreate it, also did the same creating a new house bank, but also get the same error message.
    Thank you so much for any help.
    Amarildo Rapaci
    Sealed Air Corp

    If the issue is related to "bank account number" length, you should change the "bank account number" length in OY17 as per your requirement.  You mentioned in your previous replies that you tried changing the "bank number" length in OY17, which will not help.
    You are correct; post bank acct no. is in some European countries (Switzerland, for example), so changing that will not help MX.
    Please also take a look at the following SAP Notes.
    1. Note 1573150 - Check of bank account number for Mexico
    https://service.sap.com/sap/support/notes/1573150
    2. Note 659852 - Mexico: CLABE Verification of Bank Accounts
    https://service.sap.com/sap/support/notes/659852

  • How to change bank account number...! new digit has to be added....

    HI Experts,
    At present my employees are having 13 digit bank account number,Now another zero has been added as prefix from feb 2008.
    When im trying to prefix  zero it is showing error """Change earliest retroactive account date 01.09.2005 acc to payroll area n6"""
    Where should i change this....
    Regards,\
    Sai

    Hi Sikindar,
    Thanks for your guidance.
    Instead of create option i tried with change mode.Thats why it s throwing error.Anyway thank u very much.
    Regards,
    Sai.

  • Vendor's bank account number has 19 digits.

    Dear Friends,
    The user has run the proposal run (T.CodeF110). The  vendor's bank account number didn't captured in full because it contains 19 digits.
    The SAP Note has 96624 has been implemented.As I know, all the 19 digits are not captured in F110.
    Please suggest how to solve the issue?
    Regards
    Sridhar

    Hi,
    You can do the necessary settings in SPRO --> SAP Netweaver --> General settings --> set countries --> set country specific checks.
    Here you can mention 19 as bank account number length
    Dhara D.

  • Update Bank Account number in Line items

    Hi All,
    How to update Bank account number in the bank clearing account line item.
    I used sort key to update but unsuccessful.
    please let me know the way to update the bank account number in the line item
    Thanks.
    Raj
    Edited by: Raj Racha on Nov 29, 2010 8:34 AM

    Substitution in OBBH/ GGB1 using exit
    Regards,
    SDNer

  • "entry in field bank account number is longer than 10 characters"

    Hello Sap Experts,
    The user is getting an error on saving the bank infotype. (0009). The user is trying to create a IT0009 for an international assignee.The error is "entry in field bank account number is longer than 10 characters.
    The default characters allowed maximum specified in the technical field is 18 characters. The abaper also checked and confirmed that it is specified as 18 characters.
    This is only for a single employee.
    Please provide your suggestions.
    Thanks
    Jyothsna

    Jyothsna,
    You need to extend Bank Account number length....even though 18 will be the max length..by default assignment of length will be different from country to country. So you need to extend the length of Bank a/c number in trasaction OY17.....select the country and change the bank a/c number length to 18 and Checking rule to 5 max value length.
    Mohan

  • Regarding Bank key and Bank account number

    Hi All,
    I have a query regarding Bank key and Bank account number.
    I want to set bank account number length as 9 digits. so I set it @ below path
    SPRO -> SAP NetWeaver-> General settings -> Set countries -> Set country specific checks.
    I tried to change the bank account number length to 9 digits from existing 10 digits using transaction FI12.
    But while changeing the bank account system throws an error like "Bank account number or bank number are not of valid length".
    Can any one suggest solution on this?
    Thanks in Advance!
    Regards,
    Nidhi

    Dear Nidhi,
    It seems that earlier bank account number contained 10 digits and then setting was changed to 9 digits that may be the cause of the error. Do one thing, go back to country setting and restore the bank account number digit to 10. Then make changes to bank account number to 9 digits. Make similar changes to all bank in your company code which has 10 digits.
    Then go to country settings and make account number digit to 9 digit which will prevent bank account number to be 10 digits created in future.
    Regards,
    Chintan Joshi.

  • Hide or Encrypt Bank Account Number

    Hey Guys,
    The client has a requirement in FK03 to hide/encrypt the bank account number in the bank details table in the tcode FK03. 
    When using the transaction FK03, I am having a problem with hiding or encryting a user's bank account number.  When you execute the FK03 transaction, select a vendor and go to the next screen, you are then taken to the Payment Transactions Screen.  User bank account information is displayed on this screen.  I do not want the entire table hidden, but I am unable to hide or encrypt the bank account number.  I am unable to find any authorization objects to control this specific field.  Does anyone have suggestions on how to implement this?

    If all users except the accounting department may not see the number, and the accounting department must be able to see the number from the standard transactions in this application area (e.g. FK03, XK02, etc), then you will be best off looking for an enhancement point via which you can add your own coding.
    The easiest and least intrusive way in my opinion would be to find one which affects only the payment transactions screen but regardless of the transaction context, and if the user fails an authority-check of your own invention - then modify the internal table to replace the real number with a bogus one.
    But remember that if the user can debug in display mode, then they will display the internal table before you modify it, unless you DEFINE it in a macro... (but that is again intrusive, and there still are ways).
    If you choose the encrypt / decrypt route, then you will have to fight with the field types of the bank table and can still make the same mistakes... except that someone looking directly at the table via a data broowser will not see much either... (until they find the decryption function and run that).
    Please also a take a look at [SAP Note 1257033 - Cookbook: Modification/enhancement for standard SAP system|http://service.sap.com/sap/support/notes/1257033] before proceding with an enhancement.
    Cheers,
    Julius

  • Vendor bank account number

    Hi All,
    How can i extend the length of Vendor Bank account number up to 20 Digits character over the SPRO.which max length in that field is 18 digit
    Could any one help me out in this case...
    Rgds,
    Hendro

    Are the changes being brought in only the prefix for that vendor and to reflect the same in table  LFBK and see the field in Lifnr getting updated with the new Prefix value .
    then check this Fm ..
    BAPI_VENDOR_EDIT
    May be can write a bdc for that particular vendor(s) in XK02 or can proceed with LSMW.
    Im not sure clear with what transaction you are trying to change the  prefix value cause u need to maintain that range for the vendor in the settings Spro.
    regards,
    vijay.

  • Bank account number & Bank number structure for Chile

    Hi,
    Does anybody know how the Bank number & Bank account number structure is?
    I do need to create a module for banks field (because it is not delivered in standard SAP). Does anybody do it before?
    Thanks a lot

    Dear Rafael,
    Please check the following details for the Country Chile, which is as per the TCode 'OY17' :
    Bank number length   15
    Tax Number 1             11
    Length of Bank Key   15
    Besides, you also should check the box 'Other Data' which will take care of the internal check.
    On the other hand, Conversion of bank details to IBAN is carried out by function module CONVERT_BANK_ACCOUNT_2_IBAN_<2 characters country code>. For example, for CHILE, the function module will be CONVERT_BANK_ACCOUNT_2_IBAN_CH.
    For this, two function modules and two Business Transaction Events (BTEs) are to be created for each country:
    1.  Copy the SAMPLE_INTERFACE_00003030 function module from SAMPLE_INTERFACE_00003030 to
         CONVERT_BANK_ACCOUNT_2_IBAN_??, in which you must replace the '??' with your country's name.
    2.  Copy the SAMPLE_INTERFACE_00003040 function module from SAMPLE_INTERFACE_00003040 to  
         CONVERT_IBAN_2_BANK_ACCOUNT_??, in which you must replace the '??' exactly as above.
    I hope this information is useful.
    Best regards,
    Suresh Jayanthi.

  • Bank account number for China

    Hi
    SAP standrad provides bank account number digits maximum 18 only,i am looking for solution where china bank account number digits are 19 or 22 ,can any one tell me how to achive this,is there any OSS note for this or any work around solution.
    Thanks
    Lily

    > Hi Ashok tion and Zaid
    >
    > I hope the question is not clear for you,can you go
    > country specific checks,and click on china,in that in
    > the formal checks,you will see the bank account
    > number,
    > enter 20 digits in the length,and SAVE ,System will
    > give error,as you said it will accept,can you pls
    > test it and reply me,if it really accepts i will
    > reward points.if you
    > still didnot understand the question,i am glad to
    > explain one more time.
    >
    > Thanks so much for your advice
    >
    > Bye
    > Lily
    Hi Lily:
    Did you solve your problem?, because I have the same problem with a bank account from Spain wich has 20 digits length but SAP accepts only 18
    If you dont mind help me, anyway I will continue looking for the solution
    Thanks in advance

  • Bank account number issue

    hi sapgurus,
    There is no display of the 19th digit bank account number in DME file.  But it's well-displayed in transaction PA20.
    Can anyone pls assist me how 2 proceed..
    I have checked in v_005_b and se11 (p0009) tables which says Bank account no length---18
    Do i have to change into 19..so that DME file will created with 19 digits
    Thx,
    regards,
    NAV

    generally
    the bank key details will be configured by the fico people undr the company code
    we in HR only updates
    account number
    bank key
    whether it is cash or cheque etc

  • FI12 - Swiss/Switzerland Post Bank Account Number

    Hi All,
    Please will someone help be to overcome the following problem:
    My UK client has a subsidiary in Switzerland (ctry code CH) & I'm creating some dummy demo data for a presentation.
    After creating a company based in Switzerland, in FI12 I created a house bank with currency EUR. After entering Account ID and currency EUR I cannot enter a dummy bank account number because I do not know the correct format.
    Error message 'Hyphen is in incorrect position in post office bank current account no.' AR117 appears.
    I checked in NetWeaver- Check country specific checks for 'CH'. There is a check for Post bank account number for maximum value length, without gaps u2013 but there is no mention of  hyphens.
    Please will someone tell me where I can check where the hyphen(s) should be in the Swiss post bank account number.
    Apologies for posting such a long message and thanks in advance.
    Melinda

    Hi Melinda,
    Please check if you have note 1248767 implemented. Also check the following information:
    A Postfinance account number has a structure similar to 12-123456-1,
    so there is always at least one separator.
    Should the account numbers be presented in the non-post format, which
    means a string up to 16 characters, the bank in the bank master must
    not have the 'Postbank' sign activated (BNKA-XPGRO). Or the account
    number validity check has to be deactivated for Switzerland
    (transaction OY17, country CH, 'Further Checks', parameter 'Bank data').
    There is not know new requirement regarding the handling of Postfinance
    account numbers. Without the separators the validity check would not
    be possible.
    If you need to write the account numbers in a DME file without the
    separators, and do not want to deactivate the validity check,
    you can enhance the DME format to filter it out.
    Also check note 109589.
    kind Regards,
    Fernando Evangelista

  • Bank Account number duplication in IT0009

    Dear Team,
    We want to stop the Bank Account number duplication in IT0009.
    This is regarding the updating the Infotype 0009 for a personnel number in PA30. While updating a bank account number for any employee, system has to check whether the same bank account number is updated in the database for any other employee or not so that we can stop updating the same account number to different employees.
    Please let me know how to address this.
    Kind Regards
    Nag

    Hi Nag,
    You can use the following code in the include ZXPADU02.
    DATA: v_bankn TYPE bankn.
    CASE innnn-infty.
      WHEN '0009'.
        SELECT SINGLE bankn FROM pa0009
          INTO v_bankn
         WHERE bankn = innnn-data1+113(18).
        IF sy-subrc = 0.
          MESSAGE 'Bank Account is already assigned' TYPE 'E'.
        ENDIF.
    ENDCASE.
    Pradeep.

  • Can we display the bank account number of a vendor in the payment list(APP)

    Hi Experts,
    After APP run ,when i dispaly  the payment list there exist the vendor adress details but no bank account number of vendor !
    Please confirm whether vendors bank account number can be displayed in the payment list or not?
    Note:- 1.I use programme RFZALI20 to dispaly payment list . 2. In the vendor's master data the bank account number is already maintained.
    Points will be rewarded.
    Regards,
    Ramakanta

    Hi Suresh,
    Thanks for your quick response.
    How can i dispaly the DME file ?
    As i mentioned to dispaly payment list use programme RFZALI20.
    I checked the configuration and found that payment programme RFFOUS_C is assigned against payment method "C" in the country setting.
    Note:-  We have 8 (eight payment methods) but "RFFOUS_C" is assigned only agaisnt payment method "C" (check) not against any other payment methods.
    We have a payment method "G"(Empl Payment method) and against this payment method the bank account number of vendor is displaying but not against any other payment method.
    I am confused...please help me.
    Regards,
    Ramakanta

Maybe you are looking for