How to control image size in email?

There are only 2 choices:
Optimized size
Original
The "optimized" size is still 1 MB for just one image!!!!
I want to have my old choices for "small, medium, large, original"
No and I don't want to go through the "export" route its not the convenience I am used to from a Mac!
Please fix

Roger, these discussions are rarely read by Apple, since they are users helping users. But if you send feedback to Apple, they do read it, though they rarely reply.
http://www.apple.com/feedback/iphoto.html
You can also phone Apple Care 800-APL-CARE (800-275-2273)

Similar Messages

How to control the size of SVG images in epub files?

There is unfortunately no support for SVG files in InDesign.
Most of my images in jpg convertes nicely, but the small ones do not.
Therefore I want to use SVG files which I have created in Illustrator.
But how do I set the size in the epub file? Right now, whatever I do, they come out too big and I don't know how to control the size.
Is there a program, like Sigil or other, that can place the image for me - I'm no html wizard you see....

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

How to control the size of Database's image

hi,
I have already saved image in database, & i also can retrieve image from database. But My problem is that when i save big image then it shows with it's original size. But i want to see its size what i want? But how this possible?i want to see it's small size. i cannot do it. I know how to control the image with ImageIO . But i don'nt know how to control the size of an image from database. I cannot do it. Please Help me.
Thanks
bina

Hi,
You can control the database size at technical setting level based on ur requirement. Field name is Size category.
Thanks.

How to control the size of live data in Coherence?

How to control the size of live data in Coherence?
See the following statement:
Pause times increase as the amount of live data in the heap increases. We recommend not exceeding 70% live data in your heap. This includes primary data, backup data, indexes, and application data.
--Excerpted from http://coherence.oracle.com/display/COH35UG/Best+Practices

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

How to check image size in oracle 9i & 10g database

hi,
i have inserted an Image into a table in oracle database & I want to View the Query How to check image size in oracle 9i & 10g database
thanks
Edited by: user8920919 on May 30, 2010 1:43 AM

user8920919 wrote:
hi,
How to check image size in oracle 9i & 10g database
thanksWhat do you mean with "image size"?

How to change image size defaults

Hi all
I have a burning question. In CS4, when I use the Image Size command, the default units are centimetres instead of inches under Document Size part of the dialog box.
I know that keeping rulers set to inches will change that default, but I distinctly remember the time when I was able to keep my rulers set to pixels, and my Image Size to inches at the same time.
Something changed at some point and I can't figure out what. How can I keep my rulers set as pixels, but the Image Size dialog box to inches at all times?
-iVan

Problem solved by a fellow 'shoppist at another forum. He suggested changing the regional settings in control panel and restarting a computer, as he felt that was the culprit. Well, regional settings did it indeed - caught red handed AND with a thong in a purse.
Allow me to paraphrase a rant I already vented on the aforementioned forum: See, I'm in Canada. That means we're officially metric by executive decision. Only, no one ever bothered to tell us, the mindless minions, so we still scurry about our busy little lives oblivious to the existence of a centimeter, while fully engaged in an affair with an inch (or more).
Whoops, pardon - here in Canada it's spelled centimetre.
But every once in a while someone here will stub their toe on a stray "centimeter" (I'm trying to get fired from being a Canadian). And when that happens, since we can't actually see them, we just stare into an empty half-inch space wondering what possibly could have caused a hiccup in space-time continuum.
Microsoft had other plans though. It planted the invisible centimeters into the operating system that are triggered by regional settings. Settings that are officially metric, even if in reality they don't exist, just like the Hobbits, ET's and southern democrats.
OK, rant is over!

How to set image size in a table view

Hi,
I've just built a small VC application showing some process chain logs in a table view. For the different status types Error, Warning and Success I show the well-known traffic light icons. But up to now I haven't found out how to set the image size in a table view (height & width field is greyed out for the table). Any ideas? Or is it just not possible?
Thanks for your help,
Heiko

Hello Heiko,
I don't know, if it is possible, but I would say,
it's not implemented yet. Maybe you can change the picture size and use then the pictures, that might be a workaround, if you can't change the height and width in VC.
Best Regards,
Marcel

How to view image size compared to Page size

In previous versions if you clicked the bottom left onthe frame of an image where the document size is you would get a small popup of an outline of the image size compared to the current page size. I cannot figure out how to see this in the new CS4 version. I've tried everything, help!

Hello Heiko,
I don't know, if it is possible, but I would say,
it's not implemented yet. Maybe you can change the picture size and use then the pictures, that might be a workaround, if you can't change the height and width in VC.
Best Regards,
Marcel

How to control the size/position of LabVIEW DLL front panel in MFC application?

I would like to make a MFC application which loads a DLL generated by LabVIEW application builder. How can I control the size and position of the front panel in my MFC application? Thanks.

Did you build the DLL from Labview yourself? If so, you just add another VI to the list. This VI accepts the Title of a front panel and top,left,right,bottom value of the front panel (VI property WindowBond). I'm not familiar with building DLLs using Labview so I really could not help you on how to build the DLL, but I believe it can be done (multiple VIs as multiple functions in a single DLL).
To get the windows bonds for a vi, you need to use VI server property. Check out the examples under labview directory. There are plenty of them to demostrate how to use this feature.
Joe

How to make Image/size/resolution agree with metadata resolution?

After scanning the help file a bit and searching thru this forum a bit with `metadata resolution' as search criteria, I'm still pretty confused about how it is supposed to work.. I may have never actually found the right part of the help file.
Cutting to the chase: How can I make the resolution reported by the metadata tab for resolution agree with what is reported inside photoshop at Image/size resolution. I didn't see any way to set how res is reported in bridge.
I see many pictures reported in metadata as 72 ppi for resolution and reported in photoshop as 200 pixel/inch
They do BOTH mean pixels per inch right? If so, or really even if they don't how can I get the two reports to show the same resolution?
There are too many processes that depend on knowing res in advance of opening a file for that to be so far divergent.

Jingshu Li wrote:
Some JPG or Tiff with Camera raw settings will be opened in ACR firstly when you double click them. In ACR workflow option (the bottom in the ACR dialog) the resolution value isn’t same with that in Bridge (metadata panel). If you go ahead to open the image in PS by clicking ‘Open Image’ button in ACR dialog and then check the image size from Image -> Image Size in PS, the resolution will be same with ACR (actually it is changed by ACR).
If disable ACR support for JPG and Tiff in Bridge (Open Camera Raw Preferences in Bridge and choose ‘Disable JPEG support’ or ‘Disable TIFF support’ for ‘JPEG and TIFF Handling’), JPG or TIFF files will be opened by PS directly and the resolution matches between Bridge and PS. I believe this is an ACR bug.
So what file types are you using and if they’re opened by ACR firstly in your workflow?
The files are *.jpg. But I don't see where camera raw comes in. These are common jpg files. I'm opening them by double click in bridge.
Any way I did disable jpg and tiff in the Camera Raw preferences as you suggested. At Jpeg and tiff handling, both disabled. and restared bridge.
However, I see no improvment.
For example, a file reporting 72 ppi in bridge when opened in photoshop ... Images/size resolution reports 480 pixels/inch.
There is obviously some kind of miss handling that has been done to these files for them to have such a high resolution. I suspect they may have been handled at Walgreens or Walmart... or similar since I had something very similar happen to me once when I had a bunch of pictures developed at Walgreens and they cam back with resolutions like that, when I know the camera would have given them something way less.
But I don't see how any of that should be effecting Bridges inability to get the resolution right.
Here is another example: some.jpg
It appears that bridge is showing an unusually huge file size in inches, to account for the reported 72 ppi.
Bridge:
Size: ...............1.14mb
Dimensions:.....1496x1064
Dimensions in
inches ............20.8x26.7
Resolution: .....72 ppi
===========================
Photoshop:
pixels
Width 1496
height 2064
Document size
inches
width 4.987
height 6.88
Resolution 300
Do you have further suggestions?

CSS to control image size?

Had a quick question about using CSS to contorl the image
size. I have 50 or 60 images that will show up throughout the site
(project portfolio); however, I also need about 30 of these images
to appear as thumbnails in various parts of the site... I know in
Dreamweaver after insterting the image I can downsize it, but is it
possible to set a CSS setting to resize certain images in given
table cells? Please send me a word of guidance (or perhaps another
way to display the same image in different sizes, without uploading
another smaller one). Thanks.

I have an entire site where the thumbnails are set to be
50x50 through CSS even though they're actually 60x60. It works
quite reliably. You can either put the class on the cell or the
image itself.
If you put it on the cell:
td.shrinkme img {width: 50px; height: 50px;}
<td class="shrinkme"><img src="blah.jpg">
If you put it on the image:
img.shrinkme {width: 50px; height: 50px;}
<img class="shrinkme">
Just remember, though, that even though you're setting the
dimensions of how it appears onscreen, the file size stays the
same, which could slow page loading considerably. If it's just a
matter of not being able to decide between 75x75 and 100x100, it's
only a few kb difference; but if you're taking a 400x400 and
telling it to be 75x75, that's a big deal. You probably already
knew this, but some people don't.

How to reduce image size while maintaining proportions?

Thank you in advance for reading this.
I was given an image with these dimensions: w: 13.89 x h: 5.56 inches
I'm being asked to make it fit these dimensions: w: 8.5 x h: 5.47 inches
I cannot figure out how to achieve this without the picture looking stretched, in terms of it's height. Everything looks constrained when you just do the image or canvas resize...any help/advice is greatly appreciated!

Because the Aspect Ratios are different you will need to crop it and you will lose quite a bit of the image. You can first scale the image to have a height of 5.47" using menu Image>Image Size. In the Image size dialog un-check Resample and set the print height to 5.47" click OK this will set the Image's DPI resolution to print the image 5.47" high. Next set the Rectangle marquee tool to use mode fixed size set the width to 8.5" and the height to 5.47" then click on the top left corner of the image. You will see a selection the size you want. Use the arrow keys to move the selection for the best composition then use menu Image>Crop. You will be losing over 4" of the images width....

How to check image size and 500PX upload action please!

Hi,
Two questions please.
1. How do you check the overall size of an image in Lightroom 4 before exporting. In Photoshop it is image/size so what is it in Lightroom please?
2. I have Canon raw files and tiffs and want to upload to 500PX and other web site galleries in one action. Is it possible? How do you set up an action to convert an image, say a tiff, to a certain size and then save as a jpeg and upload to 500pX using the plugin all in one action? At the moment I am saving the tiff as a jpeg to a correct size using a pre set, but then exporting to another folder ready to either manually upload or re-import to Lightroom as a jpeg then upload. Surely there is a quicker way than this?

1. The size is visible in the metadata panel, set the dropdown to EXIF. In addition, in the Grid, with Ctrl-J, you can set the options so that you will see the cropped size in the rectangle surrounding the photo.
2. You cannot, in one action, upload to multiple galleries. Each upload is its own action. I don't know if there is a plug-in to let you upload from LR to 500px in one action; clearly there are plug-ins for Flickr and Smugmug and several others. There should be no need to re-import. Normally, the plug-ins I mentioned will take a TIFF, resize it according to your directions, convert to JPG and upload.

How to set image size in d2k6i forms

I have upload an image in forms6i, in oracle apps
this code runs smoothly when images size is croped using microsoft picture manager.
and those images are not croped or size more than 50kb it shows frm-47100 can not read image file \\...........
is there any query to reduce the size of photo.
pls help me.
code is :-
DECLARE
tiff_image_dir VARCHAR2(80) :=:parameter.P_pm_photo_path;
photo_filename VARCHAR2(80);
MYEAR VARCHAR2(2);
MROLL VARCHAR2 (4);
MYEAR3 VARCHAR2 (2);
BEGIN
:System.Message_Level := '25';
MYEAR := SUBSTR(:BW_STUDENT.STU_V_YEAR,3,2);
MROLL := LPAD(:bw_student.stu_v_roll_no,4,'0') ;
MYEAR3 :=TO_NUMBER (SUBSTR(:BW_STUDENT.STU_V_YEAR,3,2))+3;
photo_filename:=tiff_image_dir||''||MYEAR||''||MROLL||''||MYEAR3||''||'.jpg';
If
nvl(photo_filename,'X')=tiff_image_dir
then
null;
else
READ_IMAGE_FILE(photo_filename, 'jpg', 'bw_student.STU_PHOTO');
end if;
END;
thanks.
Edited by: 984999 on Jan 30, 2013 12:57 AM

hi
no such a query y that corp or resize an image but u can use irfanview or acdview to resize an image
Amatu Allah

How to Set Image size in webdynpro abap application

Hi Experts,
I am using image ui elemnet in my webdynpro application and i am getting the image on application, but here the problem is i am getting the image too big now i want to set the image size.
Please Provide me the requried infromation to close the issuse.
Thanks & Regards.
Bhushan.

The Image UI element has a height and width property. Have you tried using those?
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/9e/ef8841e3af1609e10000000a155106/frameset.htm
Also consider using the property adjustImageSize to maintain the original proportions.

How to control image size in email?

Similar Messages

Maybe you are looking for