How to control Isight from a remote location?

Please help!
I need to control the Isight camera conected to a mini mac using a G5 from a diferent location.
I can control my mini mac thru Apple remote desktop fine, but I have no Idea how to control the camera intalled on the mini mac.
I want to use the camara Isight on the mini mac to monitoring the place.
Mini Mac Mac OS X (10.4.7) G 5

Hi Robson54!
Welcome to Apple Discussions!
Check out EvoCam: http://www.evological.com/
It may be what you are looking for!
Let us know how it works out!

Similar Messages

How to edit iweb from a remote location

I made a website using iweb in the office and I have a personal iweb from my home. How can I edit the office website without changing my personal from home?

you have to manage your domain files!
to get the page from the office to your home, you will need to copy the domain.sites file from the office computer to your home computer. you can find it here:
Users/username/application support/iweb/DOMAIN.SITES
copy it to the other computer. then in the "iweb" folder (see above), create a folder named after your office website. place the domain file from the office in that new folder. now when you double click you can modify that page again.
whenever you want to work on one file, you will have to double click on the one you want to use!
see here for more information:
- a little app which will do it for you
- more help: http://karreth.com/iweb/Domain%20File%20Is%20Everything%21%20Backup%20Now%21.htm l
max

How can I get my hp eprint email address from a remote location?

I am currently away from home and need to print something for my wife. I have tested out eprint before but never tried it from a remote location. I cannot recall the email address for my printer. Is there any way to retrieve this without being at the printer? I imagine that I had to sign in to the eprintcenter website to test this so alternatively, is there a way to retrieve the email address I used to set up my eprintcenter account? I am offered a way to retrieve the password but that doesn't help much if I cannot recall my eprintcenter account's email.
Thanks,
Jeff

Hi Epoclaen,
I see that you are trying to locate your ePrint email address. The only way this can be done would be to log into your ePrint account so it would require you to remember your ePrint log on information. The email address that's used to create an account is usually your personal email address. I would try using your personal email address to log into the account. Let me know how it goes.

How to wake a computer from a remote location

How to wake an imac 9 simply) from a remote location with a macbook

open itunes then - then click on store - then click on deauthorize this computer...
do the same with app store..

What ports need to be open to control Lion Server from a remote location (through Server.app)?

I need to control a Lion Server from a remote location and need to poke some holes in the firewall, unfortunately, I have no idea what ports those need to be. I can control the Server via the Server Admin application, but it will simply not connect via the Server.app.
Suggestions?
Thanks in advance.
Marius

Try in the Lion Server Forum?
Regards,
Colin R.

Connect to Sybase SQL Anywhere from a remote location.

BH
Hi, we are running SQL Anywhere 16. Currently our client computers are connecting through ODBC. Is there a way to connect to our server from a Remote Location (over the internet)? If yes, how?
Thanks
Aron

Hi Aron,
Is there a way to connect to our server from a Remote Location (over the internet)?
Yes, there is.
If yes, how?
You will need to supply a HOSTNAME (or direct IP) and PORT to the server running the network database server, communicating over TCP (Note: This may involve opening a TCP port on your firewall to provide a direct TCP route). For the SQL Anywhere client, this information can be set in the ODBC DSN entry as the following screenshot shows:
Note that this is unencrypted traffic across TCP/IP, by default.
If this communication is over the Internet, using an unencrypted channel directly to the database is not recommended. Instead, we would recommend that you also configure Transport Layer Security (TLS) with strong encryption enabled using a certificate (either self-signed or provided by a Certificate Authority (CA)). To do this, you need to create the certificates and then start the SQL Anywhere database server with the (private) server-side identity certificate.
Once the database server is started, you will then need to configure the client for secure communication with the public certificate. When configuring Transport Layer Security on the ODBC client, the security settings (e.g. trusted_certificates, certificate_unit, certificate_company, certificate_name) can be entered on the "Network" tab:
Regards,
Jeff Albion
SAP Active Global Support

I need helping!!! configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.

I need helping configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.
I have attempted to configure rdp access but it does not seem to be working for me Could I please ask someone to help me modify my current configuration to allow this? Please do step by step as I could use all the help I could get.
I need to allow the following IP addresses to have RDP access to my server:
66.237.238.193-66.237.238.222
69.195.249.177-69.195.249.190
69.65.80.240-69.65.80.249
My external WAN server info is - 99.89.69.333
The internal IP address of my server is - 192.168.6.2
The other server shows up as 99.89.69.334 but is working fine.
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. Please take a look at my configuration file and give me the commands i need in order to put this through. Also please tell me if there are any bad/conflicting entries.
THE FOLLOWING IS MY CONFIGURATION FILE
Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course
Also the bolded lines are the modifications I made but that arent working.
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password DowJbZ7jrm5Nkm5B encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.6.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 99.89.69.233 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group network EMRMC
network-object 10.1.2.0 255.255.255.0
network-object 192.168.10.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 172.16.0.0 255.255.0.0
network-object 192.168.9.0 255.255.255.0
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service GMED tcp
description GMED
port-object eq 3390
object-group service MarsAccess tcp
description MarsAccess
port-object range pcanywhere-data 5632
object-group service MarsFTP tcp
description MarsFTP
port-object range ftp-data ftp
object-group service MarsSupportAppls tcp
description MarsSupportAppls
port-object eq 1972
object-group service MarsUpdatePort tcp
description MarsUpdatePort
port-object eq 7835
object-group service NM1503 tcp
description NM1503
port-object eq 1503
object-group service NM1720 tcp
description NM1720
port-object eq h323
object-group service NM1731 tcp
description NM1731
port-object eq 1731
object-group service NM389 tcp
description NM389
port-object eq ldap
object-group service NM522 tcp
description NM522
port-object eq 522
object-group service SSL tcp
description SSL
port-object eq https
object-group service rdp tcp
port-object eq 3389
access-list outside_1_cryptomap extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-data
access-list outside_access_in extended permit udp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-status
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ftp
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ldap
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq h323
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq telnet
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq www
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group SSL
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM522
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM1731
access-list outside_access_in extended permit tcp 173.197.144.48 255.255.255.248 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp any interface outside eq 3389
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333 object-group rdp
access-list outside_access_in extended permit tcp any host 99.89.69.333 object-group rdp
access-list out_in extended permit tcp any host 192.168.6.2 eq 3389
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp 99.89.69.334 3389 192.168.6.1 3389 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 99.89.69.338 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.6.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 68.156.148.5
crypto map outside_map 1 set transform-set ESP-3DES-MD5
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 1
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
tunnel-group 68.156.148.5 type ipsec-l2l
tunnel-group 68.156.148.5 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:f47dfb2cf91833f0366ff572eafefb1d
: end
ciscoasa(config-network)#

Unclear what did not work. In your original post you include said some commands were added but don't work:
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
and later you state you add another command that gets an error:
static (inside,outside) tcp 99.89.69.333 3389 192.168.6.2 3389 netmask 255.255.255.255
You also stated that 99.89.69.333 (actually 99.89.69.233, guessing from the rest of your config and other posts) is your WAN IP address.
The first static statement matches Cisco's documentation, which states that a static statement must use the 'interface' directive when you are trying to do static PAT utilizing the IP address of the interface. Since 99.89.69.333 is the assigned IP address of your WAN interface, that may explain why the second statement fails.
Any reason why you are using static PAT (including the port number 3389) instead of just skipping that directive? Static PAT usually makes sense when you need to change the TCP port number. In your example, you are not changing the TCP port 3389.

OAS 4.0.8.1 Administration from a remote location

We have installed OAS 4.0.8.1 on NT and it is functioning.
I am able to access this from a remote place and get a static web page. I don't have a registered domain name
Can I go into Node manager (OAS Manager) from a remote location (through Internet) and manager the server.
null

I increased the severity level for logging to 15 for the Cartridge configuration
in the OASManager.
It says init method did not return. For my init method I have that following :
public void init(ServletConfig config) throws ServletException
super.init(config) ;
All the above was generated by the Servlet Wizard.
Below if the level 15 trace information :
OWS-10911: Throwing exception for reason: wrkwExecute: Exec callback returned WRB_ERROR `
OWS-10833: Cartridge HelloServlet/HelloCart init runtime callback did not return WRB_DONE `
OWS-10911: Throwing exception for reason: wrkwfInit:Error in wrkwfInit `
OWS-10911: Throwing exception for reason: wrkwfStartOrig:Error at creation time `
OWS-10911: Throwing exception for reason: wrkwfStart: Cartridge Instance factory creation failed. `
OWS-10803: Cartridge instance factory for HelloServlet/HelloCart not intialized `
OWS-10911: Throwing exception for reason: No Carrtridge Instance Factories Initialized Properly `
OWS-10821: Application HelloServlet failed to deregister with the name server `
OWS-10850: Cartridge Server HelloServlet received exception IDL:oracle/OAS/Cartridge/InitFailed:1.0 while deregistering
Can anyone advise why and what needs to be
done to fix this ??
Please help.
Thanks,

Accessing Computers Connected to a Time Capsule From a Remote Location

I am already able to access my Time Capsule from a Remote Location and have read/write access to the internal hard drive within the Time Capsule and the USB hard drive connected to it.
My problem is that I cannot access any shared computers or networked hard drives attached to the Time Capsule.
Suggestions are greatly appreciated.

If you don't want to use Back to my Mac, you can just use screen sharing. Go into Airport Utility and go the Advanced tab along the top. Then click on port mapping. Set up a new port map to route to the iMac. When I did this, I just used the "Apple Remote Desktop" option from the drop-down menu, this pre-fills everything in for you except for the IP address of the iMac. Just pop the IP address in the field, save the new port map, and Update the TC. Now you should be able to screen share from anywhere with your MacBook Pro using the screen sharing app. The Screen Sharing app is located in /System/Library/CoreServices/ScreenSharing just drag it to the dock to keep it there. When you open it up it will ask you for a host address, just type in the IP address of your time capsule followed by the 5900 port number, for example x.x.x.x:5900 where x.x.x.x is the TC IP address.
Just make sure your iMac is set up for File Sharing, Screen Sharing, and Remote Login, and you should be good to go. Just a word of caution, when the port map is set up, anyone can use it, so set up a good password on your iMac. Also, under the screen sharing pane, click on "Computer Settings" and check both boxes and enter a password in the box. You should not need this because when you try to connect with your MBP, it should give you an option for logging in as an authorized user, in which case just use login info for a user on the iMac.
Just one last thing, if you close the Screen Sharing app and open terminal and enter:
defaults write com.apple.ScreenSharing ShowBonjourBrowser_Debug 1
then hit enter and reopen Screen Sharing, it should give you a list with all your bonjour computers and saved computers, so when you out in your IP address to connect to the iMac, make sure the box for "Add to my Computers" is checked, and it will add the IP address to the list so you don't have to put it in all the time.
Hope this helps,
Nathan

Can you access an external HD plugged into the Airport Extreme from a remote location over the internet?

Can you access an external HD plugged into the Airport Extreme from a remote location over the internet?
Also can the content on the exteral HD plugged into the airport be accessed by the TV to stream content?

The first question answer is yes..
The question is asked continually.. please read the methods that Tesserax wrote up so well.
See remote access tip here.
AirPort
Also can the content on the exteral HD plugged into the airport be accessed by the TV to stream content?
Unlikely .. because your TV uses a system called DLNA.. and Apple do not support DLNA in any way shape or form.. because they are fully committed to iTunes.. Apple routers have no media extensions.. unlike most other decent brands now which mostly do support multimedia.
Having said that.. you can place your video files on the external hard disk.. and play them.. but you need a player.. a real player not an apple TV which is a streamer.. eg A WD Live TV can play video files.. because it is a media player.. unlike your TV or apple TV.

How do I send a printing job from a remote location to my photosmart 5514 printer

I have given my photosmart 5514 printer an email address. I can print successfully using the wireless network in my house. What more do I need to do to have it accept printing jobs from my iPone or laptop when I am in another remote location?

Hi,
You can send an email (including attachment) to its email address and it will print. Please note: it only supports the following format:
    Microsoft Word
    Microsoft PowerPoint
    Microsoft Excel (HP strongly recommends that you preview documents in Excel before printing)
    Text files (.txt)
    PDF
    HTML
    Images (bmp, jpg, png, gif, tiff)
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Control music from iPad remotely

Hi,
I have an iPad sat on a dock which is connected to my hifi. I'd like to be able to control playback from my iPhone 4. Does anyone know if this is possible?
Thanks,
Rob.

Try this:
http://itunes.apple.com/us/app/tango-remote-control-music/id345279970?mt=8
http://www.youtube.com/watch?v=mmIolPu6dSI

How can I access my Airport Time Capsule from a remote location?

I have my 2 TB Airport Time Capsule connected to my home wireless network and I have heard it is possible to access my information stored on it from anywhere, but I have no clue how to do this.

Frankly, this is not easy, and not for the faint of heart. Having someone to help who has done this will save you a ton of time and headaches.
Set up and use Back to My Mac - Apple Support
Before you do anything though, Back to My Mac assumes that you have a simple modem......not a modem/router that is often provided by Internet Service Providers to their customers. A modem/router.....also called a gateway.....will not allow Back to My Mac to work correctly, so if you do have a modem/router or gateway device, you will need to speak to your service provider to find out if they can provide you with a simple modem.
A simple modem will look something like this:
A modem/router or gateway will look something like this:
Having said this, personally I use another method called Port Mapping to allow my Mac...or an iPhone or iPad connect back to the Time Capsule at home when I am traveling. But, this is even more complicated than Back to My Mac, so BTMM would be the place to start for most users.
If things look intimidating on first pass and you can locate a good tech to set things up for you, that would be money well spent.

How do i set up my wireless printer to print using the internet from a remote location? 8500 pro

I have two offices and would like to print things off for my staff in different locations from my computer any place I am. I understood that I should be able to do so with the wireless system. What setting is not set proper?

Hi,
The latest printers provide remote printing by the HP ePrint feature,
If your printer is the HP Officejet Pro 8500 (A909) as i can figure from your description, the ePrint feature unfortunately not supported by your printer.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do you remove your apple id from a phone from a remote location?

How do I remove my apple id from a phone that someone bought from me over eBay?

Read here under "No Longer Have Device":
http://support.apple.com/kb/ht5661

How to control Isight from a remote location?

Similar Messages

Maybe you are looking for