How to control jsr184 animation player

I want to control the animation sequences separately from 0 to 670ms670 to 1000ms animation
How can I make
thanks a lot

duplicate post
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

  • How to control picture animation

    hi every one
    i want to control picture animation, i mean i have picture of rotating motor so  i wanna when i press button it rotate and if i press again it stop rotating
    can anyone help ?

    duplicate post
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How to control text animation duration?

    I found a similar question to this in a forum for a different product, but the only answerer didn't know the answer and merely recommended "experimenting around until you figure it out," which is possibly the most unhelpful answer ever.  Lol.
    My question is: How do I make it so a text animation brings the text in and then allows the text to sit on the screen normally for some time after that?  Currently, when I add a text animation, it insists on extending the entire duration of the clip, from beginning to end.  How do I confine the animation to, say, the first 2 seconds of the text, and then allow the text to sit normally for 8 seconds after that?

    If you are familiar with Keyframing in Flash, then it will be so very easy in PrE. You already have the concept (the hard part), and all you need to get will be details on the mechanics (where buttons are located, etc.) in PrE.
    Steve takes you though all of those mechanics, and introduces you to the Effects Control Panel, which you will use just like the Stage in Flash (if they still call it that). The look is a bit different, as you are working in Video, though you are animating in the same way. You set the Keyframes for whichever Effect you are working in, and PrE will create the Tweens for you.
    I actually like the interface (the Effects Control Panel) in Premiere better, than I did the one in Flash Studio 8 (my last version), but then I came to Flash from a film background. When I started doing Video, it was like meeting up with an old friend, however the concept of Keyframes from Flash proved very, very useful.
    I do not recall the last time that I used any animation Preset, as Keyframes give me so very much more power. The same for creating PiP, whether animated, or not.
    Good luck, and explore, experiment and enjoy!
    Hunt

  • How to control the movie player in iPhone SDK 2.0?

    Hello, everybody!
    With the third beta version of iPhone SDK I finally played a movie with the example from the manual. But I need to seek in the movie and control the playing process. With the MPMoviePlayerController class this is impossible, because it has four properties (backgroundColor, contentURL, scalingMode, userCanShowTransportControls) and only three instance methods (initWithContentURL, play, stop). The notifications are two (MPMoviePlayerScalingModeDidChangeNotification, MPMoviePlayerPlaybackDidFinishNotification). How can I know what is the current position of the head and how can I change it? I can't find other classes, which can play a movie. Can somebody help me?
    Stefan

    HeoU wrote:
    Hi Tsvyatkov,
    Do you HAVE [these problems|http://discussions.apple.com/thread.jspa?threadID=1486343&tstart=0] while playing video playback?
    - The keyboard doesn't appear after playing the video (It works great before playing the video)
    - When you play the video, iphone simulator turns in paysage mode. Then when you stop it, it doesn't turn back (SDK beta 3). It worked fine with the SDK beta 1, 2.
    - If you chose a video from a list (UITableView) and you stop the video, then come back to the list, the item is still selected with the blue color.
    thanks
    HeoU
    Yes! I have the same problems! And with the older versions of iPhone SDK I didn't.

  • How to control keyframe animation by Javascript?

    Hallo,
    I've one question. I have created an animation in 3D Max and now I want to control it Acrobat 3D PDF by JavaScript, such as STOP and PLAY.
    Thanks for your answers.

    Hallo,
    I've one question. I have created an animation in 3D Max and now I want to control it Acrobat 3D PDF by JavaScript, such as STOP and PLAY.
    Thanks for your answers.

  • Which is the best tool for PRC animation? and how to control it with javascript?

    Hi I created animations through Deep Exploration. But I want to know how to create PRC animation with tools and how to control it? I already tried with tetra4D but the javascript can control only u3d format. I have no idea to control prc animation. Please let me know.
    Thanks and Regards
    Chenet0005 @ Chenthil Kumar

    PRC files don't support embedded animations.
    You can still control the mesh directly with  3D JavaScript (e.g. by using rotateInPlace and a time event handler) but you can't import a timeline as you can with U3D.

  • How to create scroll controlled svg animations in Edge animate cc

    Since I am a beginner in Edge animate, I am very confused about svg animations in Edge animate. I want to create an effect like this http://tympanus.net/Development/SVGDrawingAnimation/index.html. In this page the animation is set to autoplay, I will controll my animation using scroller bar in adobe muse cc. Please tell me how to animate svg images like this.
    Thanks in advance

    Hi bhardwajaralhul517,
    Found something that could help you get started
    Using parallax scrolling in Animate with a single line of code | EdgeDocks.com
    How To Create A Parallax Scrolling Website | Web Design Principles
    Thanks,
    Preran

  • How to access the flash player button controls from FLEX?

    Hi,
    I'm creating one application in that i hav created a presentation in Adobe Presenter and i played in flex, now i want to control the flash player buttons from flex 3.
    Can anyone tell how to solve this, i need the solution for this very urgent, please help.
    Thanks in Advance.

    Hi,
    I'm creating one application in that i hav created a presentation in Adobe Presenter and i played in flex, now i want to control the flash player buttons from flex 3.
    Can anyone tell how to solve this, i need the solution for this very urgent, please help.
    Thanks in Advance.

  • How do I control the animation in the iframe?.

    hi everyone;
    normaly;i can stop animation by --> AdobeEdge.getComposition("id").getStage().stop();
    how can reach an animation in iframe  and stop it?
    How do I control the animation in the iframe?.

    Try wrapping the call in a bootstrapCallback function.
    AdobeEdge.bootstrapCallback(function(compId)) {
       var stage = AdobeEdge.getComposition(compId).getStage();
    -Elaine

  • How to control Flash Player 10 with Javascript?

    Are there any turotials or examples of controlling Flash Player 10 from a web page with javascript?  I want the player to pop up when I mouseover a thumbnail image and play a short relevant flv file.  When the mouse moves away from the thumbnail the player should disappear.   I imagine I'm going to have something like
    <img src="thumbnail.jpg" onmouseover="javascript:  [call flv player with .flv name and parameters to autoplay with no controls )">
    but I don't know what the javascript code should be and I don't know how to embed the flv player in my HTML so the javascript code can call it. 
    Thanks for any help.
    Steve

    it would be nice if someone can suggest a solution.because i ve the same problem.
    Jon

  • How can i control gif animations?

    I have a project in which i need some animations. The animations all have been created in After Effects. Now I can use the png sequences, but these are very big and i need a lot animations running on the same time. So i would rather use the gif animations. So my question: I can control when to play the gif animation but i can't play it more than one time. Is there a solution?
    Thanks for answering!
    Jannis

    Hi there,
    I see...you're controlling when it displays. Technically, that's not the same as controlling the animated GIF; you're just controlling when you see it. EA recognizes GIF only as an image format, and can't make the browser play from the beginning other than the first time it's displayed or when it loops back (if your animated GIF loops).
    However, you could do something similar with an extra image file or two, jQuery, and css background-image to "load" the GIF file into a transparent image. Here's a link to an example that always runs the animated GIF from the beginning:
    https://creative.adobe.com/share/52f15194-875b-4604-8857-9b9bf5f78e04
    A single line of code that does the work is in the playBtn click handler.
    hth,
    Joe

  • How do I get Active X control for flash player registered?

    I have been having problems with flashplayer.  I continue to get different messages when I try to download.  The latest message is:  Active X control for flash player could not be registered.  What do I do to get the system working?

    Looks to be a permission issue.  Do you have administrator priveleges on the machine?
    http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header_4
    You may also want to try this method to fix permissions with flash player.
    http://forums.adobe.com/thread/987370?tstart=0

  • "the activex control for flash player could not be registered" - Solutions Roundup

    I recently ran into this problem on my computer:
    http://at32.s3.amazonaws.com/flash_install_problems2.jpg
    I am a Flash developer (as in I write SWFs, I don't work for Adobe).  and when I updated IE to 10.2, "the activex control for flash player could not be registered".  Since I am a developer, I also have Firefox and Chrome installed, with Flash running without problems.  For a long time now, Internet Explorer has used a different version (ActiveX) to the other browsers, which use plugins.  I am a strong supporter of Flash, it's great to develop with and has a very wide feature set which is growing all the time, unlike fixed technologies/standards.  However, the weakest part is the install process - I don't understand why their is a Download Manager.  Google Chrome does it's best (so far) by managing the install/update process entirely in the background.  Anyway, it was in my best interest to try and get to the bottom of this.
    For the record, on the problem machine I have Windows 7 with IE8, but I have seen almost  identical symptoms with IE9, Windows XP SP3, as well as various  iterations of Flash Player (10.0, 10.1, 10.2 and even some final  editions of version 9).
    First I tried the standard support here:
    http://kb2.adobe.com/cps/191/tn_19166.html
    Basically, doing the manual uninstall and manual install of the latest version (without using the download manager, or have IE open).  This did not work.  I also tried the Microsoft "subinacl" program, together with "reset_fp10.bat".  This didn't work either.  However, you should try all of these things first before progressing further.
    A quick note about people who had tried running the following at a command prompt: "secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose"
    I didn't do this, because on investigating further it didn't seem to work with Windows 7, only Windows XP, Windows 2000 or Windows 2003 - though there was a few threads where this had fixed the problem for some users.
    For my solution, it is recommended you use the manual uninstall / installers, so you should have them downloaded ready to use.
    I then heard about problems with permissions in the registry with the key: HKEY_LOCAL_MACHINE\Software\Classes\shockwaveflash.shockwave
    So I opened regedit.exe (start - run - typed "regedit.exe"), navigated to the key and sure enough, I couldn't open it - permission denied - even though I had an administrator account.  If for some reason, you can access this key (and any subkeys), then it's likely the following fix will not resolve the problem.
    I then done further diagnosis, by using Process Monitor to try and install Flash Player, and I got the following:
    http://at32.s3.amazonaws.com/flash_install_problems.gif
    This shows all the access denied errors the Flash Player install was experiencing when trying to write to the registry key.  This confirmed that this was the problem.  I only stress this because several people said it was unwise to tinker with the registry.  Though this is common advice, this is the only known fix for this precise problem at present, since you need to manually adjust the permissions yourself.  I don't know who is at fault here - Microsoft or Adobe - but let's just get Flash fixed...
    The solution:
    Firstly, you may want to backup your registry, or the exact key.  I didn't do this so I've provided no instructions on how to, but it is recommended for the paranoid.  Also make sure as much software is closed down as possible - browsers, IM software, any junk in your system tray. As way of example, I happened to have "BBC iPlayer" installed and running in the background which uses Adobe AIR and Flash Player, so I exited that too.
    1) Open regedit (start - run - type "regedit.exe").  You may need to right click on it and select "Run As Administrator", but I didn't as my account was already administrator.
    2) Navigate to the key. HKEY_LOCAL_MACHINE\Software\Classes\shockwaveflash.shockwave
    Click on it to confirm that you cannot access it (you will get an error) - if their are no problems - this probably isn't the cause of your issues.
    3) Right click on it and click Permissions, and ignore any message that may pop up.
    4) Under "Group or Usernames" click "Add".  Type your account name name, or "Administrators" in the box, then "Check Names" to format it correctly, then Ok.
    5) Now on the next screen click the checkbox to enable Full Control (this will also automatically enable "Read" permission too).
    6) Click Advanced, then the "Owner" tab at the top.  You will see that their is no "Current Owner".  This is what we will now fix.
    7) Click on your name to change the owner to (I went for Administrators).  Also enable the checkbox entitled "Replace Owner on subcontainers and objects".  Then click Ok.  You will get an error message, which you can try clicking Retry to, but hit Cancel - this is not a problem.
    8) Click Ok a couple of times and this part of your registry is now fixed.
    9) Now it's a simple case of running the manual Flash uninstall program, then finally the manual Flash installer (for Active X - not the Firefox/Chrome plugin versions).  To my surprise, after a couple of days looking into this - I finally had a solution and Flash in IE once more.  If you are using Firefox too you may find Flash is no longer installed their (the uninstaller removed it).  In this case just install via the Adobe site or try to watch a video on You Tube and you will be prompted or linked to the install.
    Hope this provides a good round up of the possible solutions to this problem.  Hopefully Microsoft or Adobe can find out what causes this issue in the first place so we don't have to go down this route for much longer.  Chrome's implementation of Flash shows how effortlessly things can work!

    They will stay on the screen.  However, Process Monitor is only intended for advanced users.  It is recommended that users try to navigate to the troublesome registry key using regedit, and see if they can access it or not without an error.  This is far easier than trying to use Process Monitor, which is very complicated.
    I used Process Monitor to confirm that it was just that key which was causing the problem, and not others.  Process Monitor is not to be confused with the new Resource Monitor which is accessible via Task Manager in Windows 7 (and possibly Vista).  If you must experiment (and Process Monitor is very useful for diagnosing many deep-level problems if you know what you're looking for) Process Monitor can be downloaded from here:
    http://technet.microsoft.com/en-us/sysinternals/bb896645
    It replaces the older Sysinternals "FileMon" and "RegMon".  For those interested in the technical side, I had to setup a number of filters to be able to get the results display as in the screenshot.  First of all to just show Registry events.  Then to just show events from the manual Flash activeX installer executable.  The I added a filter to show only non-successfull results.  And finally, for the purposes of the screenshot, added a filter to just show those with "Access Denied", since other non-critical errors are also picked up due to missing keys because installation has not yet been fully completed I guess.   When experimenting, most of these filters were applied using the "is not" boolean logic, which will make sense if you experiment with the program.
    Without adding any filters, it picks up so many events (hundreds per second) that it's otherwise unusable.  e.g. 40,000 events within the first few seconds of opening the program. For this reason, I recommend simply using Regedit to diagnose the problem with the particular Flash registry key.

  • How to control timeline sound of external SWF

    Hi All,
    Basic Intro:
    I am new in Action Script and trying to create a video tutorial framwork. In this I have lots of animated SWF files in all the files I have multiple scenes as those are 5min. to 10 min. each and all the files have the relevent background and nurration voice place directly on the TIMELINE frame by frame to match lip syncing animated chreactors.
    My file structure :
    Login.swf with login box is embedded into the Index.html
    After logged in it will load another SWF which is Control panel.swf
    3. Controlpanel.swf has the controls to control the loaded external swf files i.e.: Chapter menu, Play, pause, replay, volume-bar, next and previous buttons.
    By Default Controlpanel.swf will open chapter1.swf as soon as user logged in so no one need to open 1st file.
    Here user can navigate to other chapter swf file through Chapter menu or Next and Previous buttons.
    All files are loading and playing properly, here I am trying to control the animation and Sound both at a same time with Pause, Play and Replay through relevant buttons.
    Problem:
    By pressing “Pause button” animation stops but not the sound. Sound remains playing, and if I replay the swf by “Replay button” than animation restarts but sound also restarts that overlaps already playing audio.
    Question: So could anybody help me finding out how to:
    1. Pause the sound with animation by the same click of Pause button, and
    2. Stop the sound with animation by the same click of Stop button, and
    3. On replay it should stop playing the previously running audio and restart it with the animation like fresh loaded file, it should not sound overlapping.
    Constraints:
    Here I am using the sound file on the same time line of each individual swf file which I cannot add into any single movie clip because all the chapter swf file are having multiple scenes in it.
    For my problem I have already done a lot of browsing online in various forums and didn't find the solution. So here I am sharing the complete information regarding the project and wishing to get some good solution out here but if I missed any helpful information please ask me anytime and please help me to quickly find out the solution.
    Thanks a lot to all of you in advance to help me.

    create one global sound variable
    you can write when you are pressing pause button
    globalsoundvariable.setVolume(0)
    to play
    globalsoundvariable.setVolume(100)

  • How to make a 2nd player in this racing game.

    I'm using this tutorial to learn how to make games in Flash for a class, but it doesn't say how to make a 2nd player.
    If somebody can show me the code to make alternative controls (W,S,A,D) for a 2nd car that'd be fantastic!
    Thanks a lot,
    Dd
    http://www.emanueleferonato.com/2007/05/15/create-a-flash-racing-game-tutorial/

    if (_root["car"+who].code == "player") {           
    if (Key.isDown(Key.DOWN)) {
                   this["speed"+who] -= _root.backSpeed;
              //steer left - well, we could simply add or subtract a fixed angle (in degrees) to/from the car's rotation, but that's not good enough. In order to simulate a natural movement, steering must depend on speed, otherwise you will be able to rotate your car even if it's almost stopped and it will look like a propeller
              if (Key.isDown(Key.LEFT) && this["speed"+who]>0.3) {
                   _root["car"+who]._rotation -= _root.rotationStep*(this["speed"+who]/_root.maxSpeed);
              //steer right - you already know what happens here
              if (Key.isDown(Key.RIGHT) && this["speed"+who]>0.3) {
                   _root["car"+who]._rotation += _root.rotationStep*(this["speed"+who]/_root.maxSpeed);
    You basically have to make a second conditional clause that starts:
    if (_root["car"+who].code == "player2") {           
    if (Key.isDown(/*Insert KeyCodeValue of the Key you want to use*/)) {....
    The AS2 keycodes can be found here:
    http://www.adobe.com/livedocs/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveDocs_Parts&file=00001136.html

Maybe you are looking for