How to control pr can't change when released

hi,guys:
   I find that pr which is released also can change or delete.
   Any way to solve it?
   Wait for your reply.
Best regards.
Dana

Hi Dan
See the following link to achieve this :
http://www.sapstudymaterials.com/2008/09/pr-release-procedure-with_5133.html
Hope it helps !

Similar Messages

Urgent!! How to update Planning book and change when planning will start

Hi Gurus,
I had configured the system and we can initilize planning area every month and my question is
1. How to update planning book and change planning start date every month?
Thanks a Lot
Regards,
Raj

Hi,
In the planning book-dataview, you will assign the time bucket profile, and will be on rollling basis. if you want the forecast profile on rolling basis, maintain the forecast and history horizon as periods then that will also be on rolling basis.
Regards,
Raj

How profit center node can be change in standard hierarchy

Hi All,
Please help me to know, can we make changes to the node of profit center or of a profit center group after activating both, through KCH5N.
Thanks & Regards,
Prafful Kansal

Prafful,
Yes, you can make changes to the nodes of std hierarchy.
Please select your std hierarchy of Profit Center in KCH2. Then you select the Profit Center Group or profit center by pressng F9 after putting the cursor on the same. Now, the screen get three new buttons to deselect, insert at same level and insert at lower level. By utilising these buttons to insert the selected PC or PC group to next node at the same level or lower level. You need to put the curson on the Prroft Center Group and select the button according to the requirement. Once, your work is over, you can save. If you made mistake, you can come out without saving. This functionality of select and insert, is same like drag and drop. One time exercise will make you master in this.
Trust this helps much
Cheers,

How can i change when i start the mac book pro, between mac and win?

when i start the mac book pro, between mac and win?

If you want to set which OS your system boots into (provided Windows is installed using BootCamp and not a virtualization option such as Parallels, Fusion, or VirtualBox), just hold the "Option" key down when you turn your computer on. Continue to hold the key down until you see the options for booting into the OS of your choice. Just click on the arrow under the one you wish (tap to click won't work here if you have it enabled... you'll need to physically click the trackpad). If you want to change which OS your system normally boots into, just go into System Preferences in OS X and select "Starup Disk". Whichever OS you select here will be the OS your system will automatically boot into.

How to control File read Proxy Service when it is polling from folder?

Hello all,
In my current requirement we are receiving xml's through one folder(LOCAL) from source side.we are picking those xml's by proxy service PS1 as file transport for every 10 sec and configured that folder path.In PS1 message flow we put on routing action to one bussiness service,that business service sending those xml's to one MQ.
We already created this interface but the issue is source side they plan to change that folder and also they want to stop this service(folder to MQ) sometimes based on synarios.That folder will be delete or if exist proxy wont read messages from that folder.
But proxy is still looking for that folder in Test ENV on Unix system then it gives error beacuse of unix folder structure is different,proxy unable to create that folder in unix system.it is creating in windows.
Now we want to control that service when the folder is ready that time only proxy will activate otherwise not..i.e like if condition "if cndtion is satisfied PS1 starts the polling from that folder else condition should be work.
How can i control PS1 service?
Is there any chance to control by using another proxy?
Experts please guide me..
regards
venu

Hi Terry,
According to your description, my understanding is that you don’t want the yollow bar notification to display when you open Access documents.
This issue seems to be about the client application. Please compare the followings with the things that you did:
1.Open the documents
2.Click File->Options->Trust Center->Trust Center Settings
3.Click Protected View, unselect ‘Enable Protected View for originating from the Internet’
4.Click Message Bar, select ‘Never show information about blocked content’
5.Click Macro Settings, select ‘Disable all macros without notification’
In addition, as this issue is about Office, I commend you create a new thread in Office forum, more experts will assist you with this issue.
Office forum:
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

My MacBook pretty much has a virus I guess because I've never had a Mac before. But I do know something is wrong because my Internet is freezing says I have no Internet connection which I do pop ups are out-of-control I can't change Yahoo off my

last night I was downloading something for church (I am new to Mac notebooks it's the first one I've ever owned and I've owned it since March 2014). I have never had a problem ever with this computer that's one reason I love it. So after I was downloading this thing it sent me somewhere and to download my file so I had download my file well I don't think it downloaded the file I wanted because I never saw that file ever again I've tried everything to figure out what's going on because now my Internet is pretty much crashed it says that there is no Internet connection I have pop-ups that want to stop me using my Internet and says it's unavailable then last night when I was on a site I have all these things at the top and at the bottom that show me other prices for things and I can't figure out how to get those off I go to their website for removal and there is no removal for Mac. Google is my search engine it will not let me put in Google when I go to type for google it throws me on Yahoo no matter what Yahoo has pretty much taken over my Internet and I don't know what to do it it's a mess. Can someone please help me I am definitely not Mav Savy.
Thanks a bunch

Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide, AdwareMedic, or Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect everything targeting the Mac.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

How to promt user to save changes when changing non-database fields?

Hi,
I have a form with two tabs. The datablock Block_1 on tab_2 is based on a database view. But all the displayed items of Block_1 are non-database items. Whenever a user changes some items in Block_1 and presses save button, the values from non_db items get copied to the db_items (based on view) and commit_form is called. This works fine.
But the problem here is: after changing some items in block_1, if the user navigates to some other option/form from the menu , the form doesnt promt the user to 'save the changes' and all the changes made are lost. How can I fix that?
I have a form level key-exit trigger, (which does not fire) with following code :-
Declare
X Number;
alert_is             alert;
Begin
If :System.Mode = 'ENTER-QUERY' Then
       Exit_Form;
Else
If :System.Form_Status In ('NEW','QUERY') Then
     alert_is := FIND_ALERT('TMPL_EXIT'); -- "Are you sure you want to exit?"
    X := Show_Alert('TMPL_EXIT');
    If X = Alert_Button1 Then
       Exit_Form(no_validate);
    End If;
    Else
       Exit_Form;
End If;
End If;
End;

Slava Natapov wrote:
Samita wrote:
Whenever a user changes some items in Block_1 and presses save button, the values from non_db items get copied to the db_items (based on view) and commit_form is called. Try to copy values to the db_items not in save button, but in WHEN-VALIDATE_ITEM of non_db items.- I created the non-db items becoz, it was asking me 'Do you want to save changes', even when I only queried data from the view (becoz i was doing some computations while displaying the items. and the form assumed that the DB items were begin changed ). Inorder to get rid of that problem, i used mirror_items (non-db) for all the db items.
So under this scenario, when i copy values to the db_items in WHEN-VALIDATE_ITEM trigger of non_db items, the form considers the db_items are changed and asks 'Do you want to save changes' even when the user has not made any changes and only queried data.
Edited by: Samita on Dec 9, 2009 10:12 AM

How do I stop fonts from changing when I drag/copy a text box to a new document?

I am using Mac OS X version 10.7.5 with CS6 version 8.0. When I create an ad in indesign and copy it or drag it onto another page (the finished layout page for a newspaper) Some of the fonts that are enabled in my suitcase, show as if they are not found when dragged to the new document. When i use "find font" and replace the "missing" font with the exact same one it was built with (in the other document) it comes in slightly different, and needs some adjusting. I deal with many ads and bringing them together to build many collective pages. How can I transfer my individual ad pages to my collective layout pages without having issues with font? I would like to still be able to edit the ad on the (collective) page, so placing a PDF or ID doc is not an option.
Please help! this is slowing down production and proving very frustrating!
Thanks in advance.

Do you use styles in these ads? Same named styles inthe receiving document with different definitions (or same named styles with differnt defintions used as the basis for other styles) can cause this. Another possibility is moving an element from a file saved in a previous version of ID into a newer version document. Legacy text frames are not recomposed until you try to edit them.

How in the HECK can I change my Hard Drive icon??!??!!

I've tried searching these discussion forums for how to do this, but the question has always remained unanswered! Does ANYbody know how to use this? I'd buy applecare but I'm a student and can't afford it. Would somebody please figure out how to make it so that you can paste a new icon on top of the standard icon for 10.3.9? It's driving me crazy that after I copy the icon I want to use for my hard drive that I can't paste it on top.
And I've tried doing a permissions repair in Disk Utility.
400 MHz PowerPC G4 Mac OS X (10.3.9)

That's how other people do it, HVlaar; it's the standard procedure. Works fine for me. Are you logged into an admin account? Have you considered that changing your hard drive icon probably isn't an important thing to do anyway?

How to get Bill / DD date changed when you're alre...

Hi All,
I've joined the forum this morning to try and save my sanity!!!! I've now ended up speaking to Indian Call centres on four seperate occassions this morning and am fed up of people anticipating what my query is, making incorrect assumptions and essentially telling me to lump it!!!!!
Query: My combined BT landline / Broadband invoice is issued on / around 16th of every month and is collected by whole bill DD approx ten days later. Unfortunately every few months this results in two DD payments being collecte within one calender month. All I want BT to do is to move my bill date (or DD collection date) so they do what every other company does which is issue one bill and collect one payment per calender month. I don't believe this should be too much to ask, but BT obviously do!!!! Please tell me there's something / someone I can contact to get this simple query resolved.....
A v frustrated Clairina :0(

Hi Eveyone,
Each area is set up with its own billing date. This is so we dont get inundated with bill processing for all our customers at once, therefore its staggered. As such we cant change your billing date.
The only billing option you can control dates on is Monthly Payment Plan (MPP). As this takes monthly payments and then applies them to a quarterly bill we can control the date the payment comes out.
If you have Line Rental Saver MPP is not an option though
Hope this helps
ta
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

How to tell the PO is for re-approve after price change when release PO

Hi,
When doing PO approval (release) with transaction code ME28, we want to know whether the PO is a newly created PO for approval or it is for Re-approve due to changes (on price, quantity etc). We want to be able to differential the Re-approve PO in ME28 screen without drill down to the PO changes history screen. Is that possible?
best rgds

hi
from ME28 goto environmentdisplay documentit will take u to po
in Po from menuenvironmentheader changes
here u can see release history
Vishal...

How to control the order of transforms when using interpolators?

We want to spin one cube around another, instead of having two cubes spinning side by side. The latter is the effect we get, no matter the order of the transforms in the tree.
We can not use normal matrix multiplications since we are using a RotationInterpolator in combination with a static translation transform.
We have tried using OrderedGroup but this did not make any difference either. Where is this supposed to be used in order to make a difference?
How are we supposed to do? Any help much appreciated.
Thanks

SphereMotion example that a give with java3D that spin
one sphere around another
you should look at thisThanks. What exactly are we looking for, are they using the PositionInterpolator to make the translation survive during the animation?
Is this what we need to do, or is there any way of making a normal transform survive?
Our semi-educated-guess is that the RotationInterpolator we use to rotate our cubes operates on the compiled transform, therefore overwriting the translation we do at the beginning (this can be seen in the very beginning, as the 2nd cube is first in it's own position, and then in the next frame it returns to 0,0 (origo)).
Are we right? Or is there a simpler explanation and solution to this?
Many thanks

How do I/or can I change pb ownership

I just gave my friend my older g4 pb, 15" 166mghz. I had a new hd installed with os 10.4.9. how can I get rid of my user folder and have my friend as the only user... we have created a new user/id but the pb wants to defer back to my user folder...
do I need to do total os install to have only my friend as the sole owner?

I looked over that link, and it does have one pitfall. It is asking a user to use rm command in single user mode, which basically is superuser. This with a typo can have devastating effects such as a complete wipe of a hard drive. Be very careful.

Iphone font at maximum and can not change, when I try to call every thing wiggles??? Help I am away from home and no phone

I have had my iPhone 4 for two months. Always had difficulty minimising and maximising screen. Now it is stuck at max and impossible to use. When I try starting a call (can't complete) everything wiggles???? Have I got a dude phone and if so what do I do as I am away from Canada for the next 4 months. Any help appreciated. Thanks

Double tap screen with 3 fingers
Stedman

Net price changes when releasing the credit block at VKM3

Hello All,
There is an issues in my sales order
when I am releasing the credit block at VKM3 for my sales order,the net price of the item is increased after the release.
example the ZP00 price is 5000 USD,ZD00 discount is 1000 USD and net total is 4000 now after the credit release the net total is increased to 4200 dont know why?
Please help me in fixing this issues
Thanks

Hi
Check if USEREXIT_NEW_PRICING_VBAP in include MV45AFZB is working. You can know it if you have the coding:
new_pricing = 'B'
I hope this helps you
Regards
Eduardo

How to control pr can't change when released

Similar Messages

Maybe you are looking for