How to control quality inspection material to do Invoice verification

I want to control on which matrial is in quality inspection, I want to bolck for IV. whenever the material not cleared from QM till invoice verification will not done. if clear from QM then IV will process.
thanks

Hi,
If QM is active , you can do that by using suitable QM control key in QM view of the Material master.
This will allow you to post the invoice , but will stop the Payment for Quality reasons. Once Quality clears the inspection lot, you can clear the invoice block (MRBR) & do the payment.
But this can be done only if QM is active.
Refer the link below
invoice block
Regards
K.M.Arun

Similar Messages

  • How to use quality inspection stock

    Hi,
    Plz tell me How to use quality inspection stock.can i use quality inspection stock for any transaction directly.
    Now i have 100 quality inspection stock is there.but i am not taking these stock to unrestricted use stock.i want use these stock to all transaction like 301,303,309.......
    it is possible or not

    hi
    Use t-code MB1B to transfer stock from quality inspection - unrestricted-use stock
    Movement Type 321 Transfer posting stock in quality inspection - unrestricted-use stock
    The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here you can post the quantity to another storage location.
    You cannot use this movement type for QM-managed materials since transfer posting for these materials takes place via the usage decision.
    Possible special stock indicators: E, K, O, Q
    u2022 K Goods receipt for purchase order to consignment stock
    u2022 O Goods receipt for purchase order to stock of material provided to vendor
    u2022 E GR for purchase order or order to sales order stock
    u2022 Q GR for purchase order or order to project stock.
    regards
    Vishal

  • Set Up Material Block for Invoice Verification

    Hi,
    Please share your experience for customization setting under General settings for material management "Set Up Material Block for Invoice Verification".
    When should we use " Material is bloked at first read" and "Material is blocked when invoice is posted".
    Does it improve MIRO transaction performance if we chnage the setting from " Material is bloked at first read" to "Material is blocked when invoice is posted"?
    Thanks & Regards,
    AG

    Hi,
    Set Up Material Block for Invoice Verification
    Use: -
       In this step, you specify at what point materials are blocked in Invoice Verification:
       o   During the allocation phase, all materials present in the invoice are blocked.
       o   During simulation or posting, materials whose stocks are to be changed are blocked and are read again.
       o   Materials whose stocks are to be changed, are blocked and are read again when you post.
       When you post directly to a material, the given material is blocked immediately in all settings.
    Standard settings: -
    In the standard system, materials are blocked during the allocation phase.
    It is suggested to block materials during allocation phase itself, so that user has not to enter all the details and then get block error at the time of Simulation or Posting. Also it improves the performance since all these transactions need not to be carried out and system informs initially that materials are blocked.
    Also refer SAPNote 210828 - Material blocks in logistics invoice verification

  • How to separate enter GR and return in invoice verification

    Hi: guys
    I have completed GR for purchase order, and then, vendor send me invoice. however, during invoice check, warehouse return goods to this vendor. so I just want enter GR item excluding the new return item. but sap system automatically propose total Qtys/amounts. I cann't manually change Qtys/amounts.
    everybody can tell me how to separate enter GR and return in invoice verification.
    someday suggest me use return PO and 161 movetype to deal with this problem. however, I not think this is a good solution.
    thank you
    Henry

    well the main point of u r problem is that u r not able to change the qyantity /value in invoice
    but system should allow u to change the quantity and vlaue as per standard sap settings
    i think u r user profile is not authorized to do so.........chek the authorization for miro
    u can aslo ue invoice reduction option in miro
    suppose u r vendor invoice u for 100 pc but u have recived only 89 pc as 20 pc u have already returned then u can use invoice reduction option to change the quantity and value and in this case sytem will genrate the credit memo and invoice
    100 pc invoice
    20 pc credit memo
    and ultiamtely u have posted 80 pc invoice
    if any thing not clear then let me know

  • How many TO need to create for Quality inspection material

    Dear all,
    When we do GR's ,TR is created & material is goes for quality inspection .
    So after UD, PCN is created so for this PCN we need to Create & Confirm TO.
    So my question is what we do for open TR which was created after GR posting.
    DO we have to create TO for this TR.
    I mean how TO get's created in this process?
    Please help me out.
    Regards,
    Rock

    what do you do physically?
    a) do you keep the stock in goods receipt area until it is released from the Q status
    b) or do you putaway that stock into its destination bins before it is released from Q-status
    in both cases you use the TR that was automatically created during goods receipt to create the TO.
    in case a) you just execute LU04 to process the posting change notice to change the stock status from Q to unrestricted  prior to creation of the TO.
    in case b) you create the TO directly and process the PCN in LU04 later when the usage decision was made.
    part B can create some difficulties (especially if you setup automatic processing) as you may get several quants because the material need more than one destination bin, while you just have 1 quant in the GR area 902.  So SAP may not be able to determine the quant that needs to be released from Q status by itself, and user has to select those quants manually.

  • Posting Block in Quality Inspection Material

    I have one requirement in QM Module as my client wants to Block the payment for the Materials which are under Quality Inspection as there are several materials got paid without Quality Clearance.
    I have changed Control key 0007 - Invoice Block, Message Code- Warning.
    Can there be any setting which will throw the message that material is under Inspection.
    Please advice on SOS basis.
    Rgds,
    Pradeep

    Thanks for reply but my client wants to <b>Block the payment for the Materials</b> which are <b>under Quality Inspection</b> as there are several materials got paid without Quality Clearance.
    I have changed Control key 0007 - Invoice Block, Message Code- Warning.
    Can there be any setting which will throw the message that material is under Inspection.

  • Material rejection and invoice verification

    hi all,
    I have take goods reciept for 100nos for a material,after GR material goes to quaity.but after quality inspection it was found that 50 nos quantity has been rejected.
    now i want to post invoice forremaining 50 material.
    my query is that how invoice is posted for remaining 50nos material?we HAVE GR BASED INVOICE VERIFICATION.
    QM procurement key is active in material master.how finance department will know that 50nos are rejected and how invoce verification will taken place for 50nos material?
    thanks in advance

    my query is that how invoice is posted for remaining 50nos material?
    After quality usage decision,only 50 nos is available in unrestricted stock which can be subsequently invoiced.
    how finance department will know that 50nos are rejected and
    how invoce verification will taken place for 50nos material?
    Ask FI dept to check reports - MMBE or MB52,rejected material can be in stock type - blocked or it
    may be moved to separate storage location for scrap.
    Otherwise if you want return rejected material to vendor,do return delivery in quality decision itself.
    You can identify material using 122 movement type in MB51 or ask FI person to check po history.

  • Reduce material cost after invoice verification

    Hi
    I have created GRN for a purchase order for which invoice verification is also done. Now i wanted to reduce the value in material cost. IN the MIRO t code, when i select material tab and enter the material number and the value, the system is giving an error message. it is giving an error message as error in account determination. in Transaction key
    PRD. the system is posting the value in the price difference account. which should not happen. If i post it to PRD account. The value of the material is not reducing.
    Pl let me know the right process to address the issue.

    The below configuration should have to be activated, if you are posting in the GL / Material directly. ( I guess you might have activated already )
    SPRO - Materials Management - LIV - Incoming Invoice - Activate Direct posting to G/L Accounts and Material Accounts
    Material Cost
        If you are trying to reduce the cost of material, then you should use transaction MR21. (Always do this in the current period )
    PO Material Cost
        If you are trying to reduce the PO item cost, then you should use Subsequent Credit in the MIRO.
        But again at the time of posting, there should be sufficient stock to post against the stock account or it will post in the price difference if the material uses MAV price. If the material uses standard price, then also it will post in the price difference account irrespective of the stock availability.
    Hope it helps.

  • How we may by pass quality inspection during PO creation

    Hi Guru,
    How we may by pass quality inspection via selecting document type in the PO. User create dummy PO in multi level marketing indsutry in order to achieve points & awards during month end. Since all the materials subject to quality inspection, material in dummy PO also falls under quality inspection. For your kind information there is no physical movement or GR for this dummy PO. It's just created in the system as I mentioned the purpose the above. I already created seperate document type to diffrentiate this scenario but looking forward how we may by pass quality inspection for this document type. Or is that any t/code which can by pass quality inspection during PO creation. Please advice. Thank you.
    rgds,
    nantha

    Dear Netto,
    As I said before user need to create dummy PO & must do GR in order to get the rewards & bonuses. User do GR in the system but it doesn't involve material movement. My question is how we may by pass the quality inspection for said GR since physically no goods involved.
    Dear JS,
    For your kind information this material subject to quality inspection & it has been set in material master. I tried one more as per your advice. System post this GR to quality inspection eventhough I change to unrestricted use in PO & GR as well before posting maid. Quality Inspection is auto defaulted for said material. Quality inspection is requirement to most of the goods so I can't change that. I'm wondering how we may by pass this just for dummy PO & GR.
    I believe this clarifies your queries. Thank you.
    rgds,
    nantha

  • Quality Inspection stock and invoice

    Hi,
    I created a PO, GR and INV successfully. I received the stock to quality inspection. After created invoice i did MB1B stock transfer(321).
    My question is when you received the stock into quality inspection how can we post an invoice for payment before transfer the stock to unrestricted? Is it correct?
    What if some stock is not good and we have to return them?  what is the general procedure around this?
    Thanks in advance.
    Madhu

    Hi Madhu,
    This is correct functionality when simply using stock status of QI and unrestricted
    If you want to restrict Invoice matching and payment you will have to investigate the use of Quality Management which has greater functionality
    Regards
    Steve

  • Exclude quality inspection batche from Batch Determination in process order

    Dear Gurus,
    When doing batch determination in process order, the system taking quality inspection batches for selection.
    I have checked in OPJJ , quality inspection stock is select but if i remove , it will effect MRP process
    How to exclude quality inspection batches from Batch Determination?
    Thanks in anticipation.
    Regards,
    Sandy

    Hello,
    I also have the same requirement. Can some one provide solution.
    Regards,
    Naren

  • Logistics Invoice Verification: how to set up Tolerance Key

    Hi Experts,
    I would like to set up tolerance key :
    Could you please tell me wich Tolerance Key (and the steps) I need to set up in order to block invoices amounts which are above 10 % of the total amount of the PO and max 50£ (absolute value).
    All Invoice above these limits should be block for payment.
    Many thanks in adavnce for your help,
    Cesar

    Hello Cesar,
    You can block the invoice for payment.
    You have to set up the tolerance limits at company code level.
    Path: IMG -> Material Management -> Logistic Invoice Verification -> Invoice Block ->  Set Tolerance Limits ->
    Here you need to maitain the respected " Tolerance Key"  and Lower limits and Upper limits %.
    This will solve your issue.
    BR
    Suneel Kumar

  • How to consider sample qty of raw material's quality inspection during mrp.

    hi expert.
    i have to consider sample qty of raw material's quality inspection during mrp.
    i am wondering how to implement it.
    is this possible?
    thank you~~!!

    Hi Seung Hyun,
    I think it depends on the sample quantity, whether it is a fixed quantity or it depends to the raw material quantity or requirement from the orders. If it is not fixed, then you can use scrap percentage as suggested by Vivek.
    If it is fixed quantity, then there are several alternatives to follow:
    Include the sample quantity to your safety stock
    Create another material number to distinguish the sample from the original raw material number and include it in the BOM
    Regards,
    Julian

  • Control if a material is posted to unrestricted use or quality inspection

    Is there a way in materialmaster I can set if I want the material default to be posted to quality inspection rather than unrestricted use?

    Hello,
    I don't know that module.
    But AFAIK you can set this in material master record on:
    - purchasing view
    - work scheduling view
    - quality view
    BR
    Csaba

  • How to by-pass: MIRO: material is still under quality inspection

    All SAP Gurus,
    At the time of posting the MIRO, system giving an error message as 'material is still under quality inspection'.
    We want to by-pass this message and post the MIRO.
    Regards,

    Hi,
    Thanks for reply.
    We have already taken the UD, and cleared the lots.
    Still the system giving the message as 'material is still under quality inspection'.
    So, we want to by-pass this message and post the MIRO.
    What settings are required for this?
    Please help...........
    Regards,

Maybe you are looking for