How to control serial no in MIGO Screen?

Hi Abapers ,
I have problem for the receiving the goods in migo screen . But user can change the serial number. but I don't want to change the serial number. in MIGO Screen.
is there any user exit OR enhancement of MIGO Screen?..
i will give reward points. this fvery urgent.....
thanks
regards,
s.muthu.
Edited by: Subramaniyan Marimuthu on May 28, 2008 10:06 AM

Hi Suyong,
I talking about migo screen when u goods receive based on production order, it will show the seperate tab screen for serial number.
That screen user can change the serial number. But I don't want to change the serial number.
how do i control when user give wrong serial number in migo screen?.
please explain me.
Thanks
regards,
s.muthu

Similar Messages

How to hide a column in MIGO screen

Hi there,
I urgently have a requirement from my Client to know if the "OK" column in the MIGO t-code can be disabled that users will not be allowed to untick the Components that are linked to the top parent part.
Also some users need to be allowed to select the Components, while few groups should not be allowed to select them but can only display when ticking the "Item OK" field.
Pls share.
Rgds,
Pri

Hi Anne,
Have you read the infomation guide for this configuration, please read below, hope it can answer your doubt .
<i>Use this function to change the settings of a table control. You can
change the width and position of a column (using drag and drop). You can
save the display at any time as a variant by entering a name and
choosing 'Create'.
You can use any variant as your personal 'default setting' for the
transation, or call it just for the current transaction. ('current
setting'). The default setting applies from the next time you call the
transaction.Choose the required variants from teh list boxes. If the
list box only contains the entry 'Basic setting', you must first create
a display variant. You can also define a new variant as the default when
you create it by selecting the corresponding checkbox.The display
defined in the application program ("Basic setting") can always be used
as the default or current setting.    </i>
Regards,
w1n

User-Exit to change serial no. in MIGO

Hi experts,
I am looking for a user-exit/BADI in MIGO which can provide the change of serial no. in MIGO. From thread: Exit to validate serial no. in MIGO, I saw that the user-exit EXIT_SAPLIPW1_008 can be used to do checks for serial no. but I need also to change serial no.
Could anyone help me how to change serial no. in MIGO? Any suggestion will be good rewarded.
Thank you in advance.
Regards,
Danijela Zivanovic

use following prog to find out user exits -
*& Report ZUSEREXIT                                                   *
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
reward if useful
S@meer

How to activate hold button in MIGO ?

Dear all,
How to activate hold button in MIGO Screen ?
Jeyakanthan

Note 316931 - MIGO: 'Hold data' does not work
Summary
Symptom
The function 'Hold data' is not active in Transaction MIGO.
Additional key words
Enjoy
Cause and prerequisites
This is caused by a program error.
Solution
Set the attribute 'Hold data' in the Screen Painter (Transaction SE51) for program SAPLMIGO in all screens. Generate the screen after you made the change. The functions are then available.
You do not need to implement the changes manually if you import Support Packages.
A prerequisite is that Note 303091 exists in your system.
Manage held data
You can use this function to hold the data you are currently entering. No documents are posted.
To retrieve this data, choose "Goods receipt -> Held data". When retrieving the data, the held data is deleted from the overview tree.
If you want to delete held data that is no longer required from the overview tree, you can select this data with "Goods receipt -> Held data".
It is also possible to use held data as a reference for frequently recurring transactions, that will not be deleted after being called again.
Caution:
Some data cannot be held by the system and has to be re-entered after you try to retrieve it. This data includes:
Batch classification
Import data
Profitability segment
In Batch Classification, newly created selection criteria is lost if you do not post the document immediately.
Edited by: sudhansu satapathy on Mar 4, 2010 9:19 AM
Edited by: sudhansu satapathy on Mar 4, 2010 9:21 AM

Disable Serial Number Field in MIGO Screen

Hi all,
I want Disable Serial Number field in MIGO Screen how do i disable ?
is there any user exit or enhancement ?
Anybody please tell me.
Thanks
Regards,
S.Muthu.

S. Muthu
Apply Transaction Variant and Screen Variant through transaction SHD0 for MIGO. Hope it will solve your problem.
Otherwise, discuss this requirement with MM Functional Consultant. In SPRO, it may have some setting to make it display...
Thanks & regards
Amol Lohade

How can i set a layout for MIGO screen

Hello all,
How can i set a layout for MIGO screen. & make that layout default. Like i want to drag Requistioner column next to quantity in MIgo screen. temporarily I can drag but is there a way to save as layout & save it.

Hi
First you arrange however you want and then go to table settings which is there in the right corner of the item details and create a variant and save.
Find a button with blue yellow and white at the top end above the vertical drag bar when put the cursor it will show you as Configuration.
After creating the variant tick the check box use as standard setting below the variant
Hope it helps
Edited by: Girish Adaviswamy on Mar 3, 2010 1:27 PM

How to display a table data on Screen having a Table control

Hi ,
I am new to ABAP.I would like to display a table data (Eg: ZDemo) on a screen at run time.I have defined a Table control in screen. Now I want to populate data from ZDemo to table control.How can I do that?Please help moving forward in this regard.

Hi Gayatri,
After creating table control do the following steps.
1. In the flow logic section write the following code:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
LOOP AT I_LIKP WITH CONTROL LIKP_DATA CURSOR LIKP_DATA-CURRENT_LINE.
MODULE ASSIGN_DATA.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0200.
LOOP AT I_LIKP.
ENDLOOP.
I_LIKP is the internal table which is used to display table data in the table control.
2. In Process Before Output, in the module STATUS_0200 write the following code:
DESCRIBE TABLE I_LIKP LINES FILL.
LIKP_DATA-LINES = FILL.
In Process After Input, in the module USER_COMMAND_0200 write the following code:
CASE SY-UCOMM.
   WHEN 'LIPS'.
    READ TABLE I_LIKP WITH KEY MARK = 'X'.
    SELECT VBELN
           POSNR
           WERKS
           LGORT
           FROM LIPS
           INTO TABLE I_LIPS
           WHERE VBELN = I_LIKP-VBELN.
    IF SY-SUBRC = 0.
     CALL SCREEN 200.
    ENDIF.
   WHEN 'BACK'.
    SET SCREEN 200.
ENDCASE.
In Process Before Output and in the module ASSIGN_DATA which is there inside the loop write the following code:
MOVE-CORRESPONDING I_LIKP TO LIKP.
So, Totally your flow logic code should be like this.
TABLES: LIKP, LIPS.
DATA: BEGIN OF I_LIKP OCCURS 0,
       VBELN LIKE LIKP-VBELN,
       ERNAM LIKE LIKP-ERNAM,
       ERZET LIKE LIKP-ERZET,
       ERDAT LIKE LIKP-ERDAT,
       MARK TYPE C VALUE 'X',
      END OF I_LIKP,
      BEGIN OF I_LIPS OCCURS 0,
       VBELN LIKE LIPS-VBELN,
       POSNR LIKE LIPS-POSNR,
       WERKS LIKE LIPS-WERKS,
       LGORT LIKE LIPS-LGORT,
      END OF I_LIPS,
      FILL TYPE I.
CONTROLS: LIKP_DATA TYPE TABLEVIEW USING SCREEN 200,
          LIPS_DATA TYPE TABLEVIEW USING SCREEN 300.
DATA: COLS LIKE LINE OF LIKP_DATA-COLS.
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'LIKP'.
   SELECT VBELN
          ERNAM
          ERZET
          ERDAT
          FROM LIKP
          INTO TABLE I_LIKP
          WHERE VBELN = LIKP-VBELN.
   IF I_LIKP[] IS INITIAL.
     CALL SCREEN 200.
   ENDIF.
WHEN 'EXIT'.
   LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module assign_data OUTPUT
      text
MODULE ASSIGN_DATA OUTPUT.
MOVE-CORRESPONDING I_LIKP TO LIKP.
ENDMODULE.                 " assign_data OUTPUT
*&      Module STATUS_0200 OUTPUT
      text
MODULE STATUS_0200 OUTPUT.
DESCRIBE TABLE I_LIKP LINES FILL.
LIKP_DATA-LINES = FILL.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module USER_COMMAND_0200 INPUT
      text
MODULE USER_COMMAND_0200 INPUT.
CASE SY-UCOMM.
   WHEN 'LIPS'.
    READ TABLE I_LIKP WITH KEY MARK = 'X'.
    SELECT VBELN
           POSNR
           WERKS
           LGORT
           FROM LIPS
           INTO TABLE I_LIPS
           WHERE VBELN = I_LIKP-VBELN.
    IF SY-SUBRC = 0.
     CALL SCREEN 200.
    ENDIF.
   WHEN 'BACK'.
    SET SCREEN 200.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
Save and Activate the program along with the screen in which you have included table control.
Hope this will help you.
Regards
Haritha.

How to control the screen in LSWM

Hi ,
I am creating a LSMW for tcode ABAON . For this tcode there will be a POP UP screen populate once for company code to key in.But next time when we enter this tcode It won't call this pop up for input.
If I run the file which is having company code for alll fields or If I run second time it will give error screen not found.
How to control this in screen level.
I don't want go for parmater id in config.
Pls advice.

solved by self.

HT4689 How do I get out of full screen view in mission control?

How do I get out of full screen view in Mission control so IO can close the app?

Press the escape key, but, when you move the cursor to the top of the screen, doesn’t the menu bar reappear? It is supposed to.

How can I directly update a SAP screen table control with values?

I have a need to update a table control on a standard SAP screen with values. Here's the scenario: The user will come into a standard SAP transaction (IQS2-change notification) and click on an action button which calls a function module. That function module will determine what needs to be added to the SAP screen table control (add additional task rows). When the function module returns with the row data to be added to table control, I would like to set those values as if the user input directly. The table control is located on it's separate tab (TASKS) in the transaction. I cannot find any user exists or BADI's for this transaction to allow me to affect the TASKS tab table control for this GUI. I'm trying to prevent from having to make a custom modification. If anyone has any ideas, please let me know. Thanks.

Hi,
Check these enhancements:
IWOC0002      PM/SM notification: Check whether status change is allowed
QQMA0001      QM/PM/SM: User Subscreen for Notification Header
QQMA0008      QM/PM/SM: User Subscreen for Additional Data on Notif. Ite
QQMA0011      QM/PM/SM: User Subscreen for Additional Data on Task
QQMA0013      QM: Default Values when Creating a Task
QQMA0014      QM/PM/SM: Checks before saving a notification
QQMA0015      QM/PM/SM: User-Exit before Call-Up of F4 Help on Catalogs
QQMA0016      QM/PM/SM: "User data" Function "Goto" --> "Task" Menu
IWO10026            User check on setting status 'Do not perform'
IWO10027            User exit: Generate user-defined settlement rule
IWOC0001            Create PM/SM notification: Determine reference object
IWOC0002            PM/SM notification: Check whether status change is allowed
IWOC0003            PM/SM authorization check of ref. object and planner group
IWOC0004            Change single-level list editing PM/QM/SM ALV settings
Regards
Appana

MIGO screen display settings

All,
After going to MIGO screen ,below 'show overview' , we can find the field where we can select Goods Receipt or Display etc .
In my setting its coming as 'A01 Goods Receipt' , A02 Display' etc .
How to make the settings so that I can remove 'A01' , 'A02' etc
Kindly advise .
regards

Hello Sandeep,
When you open MIGO transaction, you will find colurful button (Customizing of local layout) beside help button, click on that and select Option, it will open popup screen, click on expert button, Uncheck both indicator in control Box .
Hope this helps
Regards
Arif Mansuri
Reward if answer is helpful.

How to accept multiple attachments on selection screen?

Hi All,
I need to know how to accept multiple attachments on selection screen and send them as email to external system (outlook).
Basically, my req is to send a common email with attachments to certain users. These users are displayed in ALV. User will select ALL or specific user from ALV and send an email with message entered on selection screen.
I used text editor control to input message body. I need to know how to accept attachments and send them.
Appreciate any inputs.
Thanks,
SKJ

SAP uses a nifty little button called 'Object Services' on ME23N (top left) which you can use to attach documents to business objects.
http://help.sap.com/saphelp_nw70/helpdata/EN/be/3fe63659241157e10000009b38f889/frameset.htm
It's a complicated way of doing it but might give you extra functionality in the long run.

Batch determination not working during goods issue in MIGO screen

Hi,
We have configured search strategy according to shelf life expiration while doing the goods issue with movement type 201, 351 etc. Now when I do goods issue in MB1A for movement type 201 or in MB1B for movement type 351, by entering the * and clicking enter, system proposes the batch nos of the material according to the shelf life expiration. But when I do same procedure in MIGO screen, while entering * in batch field system does not propose the batch nos., instead it gives error as "use of special characters are not allowed"
How the above problem can be resolved?
Thanks in advance,
Satish

Thanks Aroop & Jurgen
I have done the settings as per your suggestions by maintaining the Stock Determination Group. However It picks the batches as per FIFO and not as per shelf life expiration. Also same is the case with MB1A or MB1B.
The reason I wish to use MIGO instead of MB1A or MB1B is as follows
Suppose STO is made of say 10 line items (all Batch managed items). Now while issuing the goods, say for the seventh item there is no stock available then I can not bypass this item (it asks for enter the batch no. even though I change the quantity to zero) and I have to abort the complete transaction. But in case of MIGO I can bypass this item by unchecking the item OK check box.
Any inputs on the above will be helpful.
Thanks,
Satish

How to control the maximum size of a component in a GridBagLayout

Here is a small program that demonstrates my issue (it's originally from a big program that I couldn't attach here).
I have a GridBagLayout with some components in it. Some of the components are JEditorPane (displaying some HTML) within JPanel and are individally scrollable.
Here we go:
- when I resize the main panel, every components will resize accordingly to their weight (which is here the same for all of them): fine
- when I reduce the size of the main panel until it reaches all the preferred size of each component, the scrollPane of the main panel appears so that the user can scroll: not fine
The behaviour I'm looking for is: when I reduce the size of the main panel, when it reaches the preferred size of the components, I would like that the JEditorPane (which are in JPanel with BorderLayout/CENTER) display their individual scrollbars so that I can see all the JEditor panes at the same time without having to scroll the main window.
If the user continues to reduce the size of the main panel, then, at one point, display the scrollpane of the main panel.
See what I mean? How to control this?
Here is the code:
@SuppressWarnings("serial")
public final class CGridBagLayout2 extends JFrame {
     JPanel mainPanel;
     private final JScrollPane scrollPane;
     private JPanel panelize(Component component, String localization) {
          JPanel output = new JPanel(new BorderLayout());
          output.add(component, localization);
          return output;
    public void addComponentsToMainPanel() {
          mainPanel.setLayout(new GridBagLayout());
          GridBagConstraints c = new GridBagConstraints();
          c.weightx = 1.0;
          c.fill = GridBagConstraints.BOTH;
          String TEST_BIGTEXT = "<html><body><h2>Path</h2>toto/tutu/tata/TestN<h2>Prerequisites</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah<h2>Description</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah blah\nblah blah blah <br/>lah blah blah <br/>lah blah blah blah blah blah blah blah FIN</body></html>";
          for (int index=0; index<10; index++) {
               c.gridheight = 5; // nb Testcases for this test
               c.anchor = GridBagConstraints.FIRST_LINE_START; // align all the components top-left aligned
               c.gridy = index;
               JLabel a = new JLabel("AAAAA");
               c.gridx = 0;
               mainPanel.add(panelize(a, BorderLayout.NORTH), c);
               JLabel b = new JLabel("BBBBB");
               c.gridx = 1;
               mainPanel.add(panelize(b, BorderLayout.NORTH), c);
               JEditorPane d = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 2;
               mainPanel.add(panelize(d, BorderLayout.CENTER), c);
               JEditorPane e = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 3;
               mainPanel.add(panelize(e, BorderLayout.CENTER), c);
               index++;
     public CGridBagLayout2() {
          super("GridBagLayout");
          mainPanel = new JPanel();
          addComponentsToMainPanel();
          scrollPane = new JScrollPane(mainPanel);
          setContentPane(scrollPane);
     public static void main(String[] args) {
          Frame frame;
          WindowListener exitListener;
          exitListener = new WindowAdapter() {
               @Override
               public void windowClosing(WindowEvent e) {
                    Window window = e.getWindow();
                    window.setVisible(false);
                    window.dispose();
                    System.exit(0);
          frame = new CGridBagLayout2();
          frame.addWindowListener(exitListener);
          frame.setPreferredSize(new Dimension(1000, 800));
          frame.pack();
          frame.setVisible(true);
}Many thanks in advance, I'm getting crazy on this one :)

Ok, thanks for this information, I thought I had seen this happening in the past when embedding a component in the center area of a JPanel with BorderLayout.
Anyway, as I said I tested with JScrollPane as well and it does not change anything.
Here is the code modified:
@SuppressWarnings("serial")
public final class CGridBagLayout2 extends JFrame {
     JPanel mainPanel;
     private final JScrollPane scrollPane;
     private JPanel panelize(Component component, String localization) {
          JPanel output = new JPanel(new BorderLayout());
          output.add(component, localization);
          return output;
    public void addComponentsToMainPanel() {
          mainPanel.setLayout(new GridBagLayout());
          GridBagConstraints c = new GridBagConstraints();
          c.weightx = 1.0;
          c.fill = GridBagConstraints.BOTH;
          String TEST_BIGTEXT = "<html><body><h2>Path</h2>toto/tutu/tata/TestN<h2>Prerequisites</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah<h2>Description</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah blah\nblah blah blah <br/>lah blah blah <br/>lah blah blah blah blah blah blah blah FIN</body></html>";
          for (int index=0; index<10; index++) {
               c.gridheight = 5; // nb Testcases for this test
               c.anchor = GridBagConstraints.FIRST_LINE_START; // align all the components top-left aligned
               c.gridy = index;
               JLabel a = new JLabel("AAAAA");
               c.gridx = 0;
               mainPanel.add(panelize(a, BorderLayout.NORTH), c);
               JLabel b = new JLabel("BBBBB");
               c.gridx = 1;
               mainPanel.add(panelize(b, BorderLayout.NORTH), c);
               JEditorPane d = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 2;
               mainPanel.add(panelize(new JScrollPane(d), BorderLayout.CENTER), c);
               JEditorPane e = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 3;
               mainPanel.add(panelize(new JScrollPane(e), BorderLayout.CENTER), c);
     public CGridBagLayout2() {
          super("GridBagLayout");
          mainPanel = new JPanel();
          addComponentsToMainPanel();
          scrollPane = new JScrollPane(mainPanel);
          setContentPane(scrollPane);
     public static void main(String[] args) {
          Frame frame;
          WindowListener exitListener;
          exitListener = new WindowAdapter() {
               @Override
               public void windowClosing(WindowEvent e) {
                    Window window = e.getWindow();
                    window.setVisible(false);
                    window.dispose();
                    System.exit(0);
          frame = new CGridBagLayout2();
          frame.addWindowListener(exitListener);
          frame.setPreferredSize(new Dimension(1000, 800));
          frame.pack();
          frame.setVisible(true);
}Edited by: eric_gavaldo on Sep 15, 2010 2:18 PM

How to load and display the external flv video files in dynamicly and the how to control the flv fil

How to load and display the external flv video files in dynamicly using AS 3.0
and How to control the flv file add the play paus button and add seekbar.
I have using to load the flv file following code
var flvPlaceHolder1:MovieClip = new MovieClip();
var vid1:Video = new Video(734, 408);
flvPlaceHolder1.addChild(vid1);
addChild(flvPlaceHolder1);
flvPlaceHolder1.x = 1059;
flvPlaceHolder1.y = 152;
var nc1:NetConnection = new NetConnection();
nc1.connect(null);
var ns1:NetStream = new NetStream(nc1);
vid1.attachNetStream(ns1);
var listener1:Object = new Object();
listener1.onMetaData = function(evt:Object):void {};
ns1.client = listener1;
ns1.play("GV-1600 TURNING.flv");
ns1.addEventListener(NetStatusEvent.NET_STATUS, statusChanged1);
function statusChanged1(ns1:NetStatusEvent):void
         trace(ns1.info.code);
        if (ns1.info.code == 'NetStream.Buffer.Empty')
             trace('the video has ended');
             removeChild(flvPlaceHolder1);
             //trace('removeChild');
            gotoAndPlay(1786);
then how to add the play,paus ,full screen button    and   seekbar,volumebar.

I have to Create the flash presentation for our company product
In this presentation the left side the text animation are displayed then right side the our product video is displayed.
In this presentation i need the following option :
1, The first product video and animation is finished then the next product is played
2, then the video displayed (size width and height 400x300) , I click this video to increase the size(ex:1000x700)
3, then the playing video i control it play, stop, paus button and volume bar, seek bar.
4, then this presentation is displayed on 42 inches LCD TV so this full presentation is run full screen.
I have finished first two steps 1 and 2
the following are the screen short and code:-
code :-
var count=0;
var flvPlaceHolder2:MovieClip = new MovieClip();
var vid2:Video = new Video(734, 408);
flvPlaceHolder2.addChild(vid2);
addChild(flvPlaceHolder2);
flvPlaceHolder2.x = 1059;
flvPlaceHolder2.y = 152;
var nc2:NetConnection = new NetConnection();
nc2.connect(null);
var ns2:NetStream = new NetStream(nc2);
vid2.attachNetStream(ns2);
var listener2:Object = new Object();
listener2.onMetaData = function(evt:Object):void {};
ns2.client = listener2;
ns2.play("GS-4000.flv");
this.addEventListener(Event.ENTER_FRAME, BtnFadeIn2);
function BtnFadeIn2(event:Event):void
    if (this.currentFrame == 387)
        /*flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
        trace('Screen size is changed');*/
        if(count==0)
        flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
        count++;
ns2.addEventListener(NetStatusEvent.NET_STATUS, statusChanged2);
function statusChanged2(ns2:NetStatusEvent):void
    trace(ns2.info.code);
    if (ns2.info.code == 'NetStream.Buffer.Empty')
            trace('the video has ended');
             removeChild(flvPlaceHolder2);
             //trace('removeChild');
            gotoAndPlay(433);
flvPlaceHolder2.buttonMode=true;
flvPlaceHolder2.addEventListener(MouseEvent.CLICK,home2);
function home2(e:MouseEvent):void
    if(vid2.width==734 && vid2.height==408)
        flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
    else
        flvPlaceHolder2.x = 1059;
        flvPlaceHolder2.y = 152;
        vid2.width=734;
        vid2.height=408;

How to control serial no in MIGO Screen?

Similar Messages

Maybe you are looking for