How to control the data in data selection

Hi,
how to control the data .
in the transfer structure I am having 10 fields and and the file which is to be loaded contains 7 fields only.where can I control the other 3 fields and how .
thanks in advance
karna

If your source file is flat file, add extra three fields with blank (just add field separator say comma for each extra field) and then load. It should be ok.
Hope it helps..

Similar Messages

How to control the default Reverse Date at VL09

Hello,
At VL09 (reverse goods movement) screen, the default Reverse Date is today.
If users want to modify the Reverse Date,
users have to select a line, click on define date button and input date into the local date field at pop-up screen.
I want the default Reverse Date at VL09 screen to be the same as the Actual GI date of delivery.
Please tell me how.
Thank you.

1. There is no standard BADI and userexit which can fulfill your requirement.
2. You can try to do the modification in RVV50L09.
Before
"CALL FUNCTION 'WS_REVERSE_GOODS_ISSUE'"
You can add "Move XLIKPUKWA-wadat_ist to XLIKPUKWA-STDAT. "

How to control the number of rows selected from a sybase database table?

Hi, JDBC guru,
I'm working on project using Sybase 11.9.x database.We need to process a record in a table,first select it from the table,then do some computing,finally write it to a dbf file, if the above steps succeed,remove the original row in the table.Quite evidently, all these operation should be put into one transaction. But how can I select just a number of rows from the sybase database table?
Any hints?
Thank you in advance.
Regards,
Jusitne

Statement stmt...
stmt.setMaxRows(20);

How to control the size of live data in Coherence?

How to control the size of live data in Coherence?
See the following statement:
Pause times increase as the amount of live data in the heap increases. We recommend not exceeding 70% live data in your heap. This includes primary data, backup data, indexes, and application data.
--Excerpted from http://coherence.oracle.com/display/COH35UG/Best+Practices

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly.

How to track the flow of data from R/2 to BI ?

Hi Experts,
Question: How to track the flow of data from R/3 to BI ?
I want to load master data from R/3 to BI. In BI, i create an infopackage to load data from R/3. Under processing tab i set it as "PSA and then in the InfoObject (package by package)". Its a Full update.
Now, i start the update to InfoObject. The load goes on well.
Now, i want to track the flow of data from the master data table in R/3 to Datasource in R/3 then Extractors and then in the PSA in BI and then till the InfoObject. That is the complete flow of data from source table (in R/3) to Target table (in BI).
Please help me know how this can be done. (For example lets take cost element master data)
Regards,
Suraj S Nair

Hi,
Data flow :
BW :
When u right click on the Master Data Info object -> Select Data flow.Then it will show u the details like DS name,IS (If 3.x)
Once u know the DS then you need to find out the source tables for the R/3 DS.This information will get using ROOSOURCE or ROOSFIELD tables or help.sap.com.
My suggestion better to search in Help site for DS source tables.
DS Tables :
The following link will provide you the source tables for some of the LO DS.
https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Dec 22, 2009 9:29 AM

How to store the flat file data into custom table?

Hi,
Iam working on inbound interface.Can any one tell me how to store the flat file data into custom table?what is the procedure?
Regards,
Sujan

Hie
u can use function
F4_FILENAME
to pick the file from front-end or location.
then use function
WS_UPLOAD
to upload into
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'   "Function to pick file
    EXPORTING
      field_name = 'p_file'     "file
    IMPORTING
      file_name = p_file.     "file
CALL FUNCTION 'WS_UPLOAD'
   EXPORTING
     filename                       = p_file1
    TABLES
      data_tab                      = it_line
*then loop at it_line splitting it into the fields of your custom table.
loop at it_line.
          split itline at ',' into
          itab-name
          itab-surname.
endloop.
then u can insert the values into yo table from the itab work area.
regards
Isaac Prince

How to increase the number of data Business Object can pull for a report?

Hi,
I would like to ask around how to increase the number of data Business Object can pull for a report. I have a report which pulls data depending on the date range (ex. From 01/01/2007 - 01/10/2007). But, when the data that is pulled exceeds 5000, the report fails. Is there anyway to increase the number of data that BO can pull?
Thanks

Bobby,
to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
in order to check the setting in source system SBIW--> General Settings --> Control Parameters for Data Transfer.
we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
All the best.
Regards,
Nagesh Ganisetti.

How to make the exchange of data between 2 while loop in real time

hello
I have 2 while loop
the 1st while loop includes the data acquisition program
the 2nd while loop includes the control program
my question is how to make the exchange of data between 2 while loop in real time
I tried with the local variable and direct wiring between the 2 while loop
it does not work (there is a delay)
Solved!
Go to Solution.

Bilalus,
Queues are only good to transfer data if your application isn't deterministic. Since you are using Real Time, I am assuming that your application requires determinism. If you are using Timed Loops and you use queues to transfer data between your loops, you are losing determinism. In this case, you need to use the RT FIFO functions.
Warm Regards,
William Fernandez
Applications Engineering
National Instruments

How to find the Last modified date and time of a package

Hi,
We need a clarification on how to find the Last modified date and time of a package in Oracle. We used the example below to explain our scenario,
Lets consider the following example
Let A, B be two packages.
Package A calls the package B. So A is dependent on B.
When A is compiled the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated.
Now there a modification in package B so it is compiled. There is no modification in package A.
Now when the package A is executed the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated but we did not make any change in Package A. Now we need to find last modified date and time of the package A . So we can not rely on the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS . Can u please tell us any other solution to get last modified date and time of the package A .
Regards,
Vijayanand.C

Here is an example:
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 10:57:32 2004-05-20:10:57:32 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 VALID
SQL> CREATE OR REPLACE PROCEDURE A AS
2 BEGIN
3 NULL;
4 NULL;
5 END;
6 /
Procedure created.
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 INVALID
SQL> EXEC B
PL/SQL procedure successfully completed.
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 11:01:53 2004-05-20:11:01:53 VALID
Note that the date under the column 'created' only changes when you really create or replace the procedure.
Hence you can use the column 'created' of 'user_objects'.

How to find the last update date time and user of record field peoplecode

how to find the last update date time record field peoplecode?
Thank you.

One can check the last update date time using the following query
SELECT LASTUPDDTTM FROM PSPCMPROG WHERE OBJECTVALUE1 LIKE 'RECNAME' AND OBJECTVALUE2 LIKE 'FIELDNAME'

How to find the last modified date of a workflow.

How to find the last modified date of a workflow.
thanks.

Hi,
There is nothing as standard that does this - you could write some code to determine the latest begin_date from each of the workflow tables and assume that this was the last time that the definition changed.
What you need is something like this:
select max(wfa.begin_date)
from   wf_process_activities wpa
,      wf_activities          wfa
,      wf_item_types_tl       wit
where wpa.activity_item_type = wfa.item_type
and    wpa.activity_name      = wfa.name
and    wfa.version            = (select max(version) from wf_activities wfa1 where wpa.activity_item_type = wfa1.item_type and wpa.activity_name = wfa1.name )
and    wpa.process_item_type = 'your item type'
and    wpa.process_item_type = wit.namewhich I think gives what you want.
HTH,
Matt
Alpha review chapters from my book "Developing With Oracle Workflow" are available on my website:
http://www.workflowfaq.com
http://forum.workflowfaq.com
NEW! - WorkflowFAQ Blog at http://thoughts.workflowfaq.com

How to Send the material master data from sap4.6c to ECC6.0

Hi
Friends this is shalini Shah, i got one requirement that is
how to send the materail master data from SAP 4.6C to ECC6.0 using XI.
i know the file to idoc and idoc to file scenarios but i don't know this one.
please help me friends, Thanks in advance.
Regards
Shalini Shah

Hi Shalini,
To trigger IDoc these configurations should be done in the SAP 4.6, XI and ECC 6.0.
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3 (4.6 and ECC 6.0)
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Also go ther the Blog <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a> By Swaroopa Vishwanath
U need to import the IDoc types both inbound and outbound to XI.
1. Create Inbound and Outbound Message interface.
2. Do one to one message mapping.
3. Define an Interface mapping.
ID:
1. Create 1 Sender aggrement.
2. Create 1 Receiver aggrement.
3. Define 1 RD and ID.
4. Only create an receiver IDoc CC.
Regards
San
<a href="Remember to set the thread to solved when you have received a solution to set the thread to solved when you have received a solution</a>
Where There is a <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16">blog</a> there is a Way.

HOW TO FIND THE REQUIRED DELIVERY DATE IN VA02

hi
HOW TO FIND THE REQUIRED DELIVERY DATE IN VA02.
i want to display this field in my report. what is the fieldname and in which table it is ?

Hi Jyothsna,
There are 2 dates when you say Requested Delivery Date
1. Header level in VBAK-VDATU is the field
2. At item level it is in the schedule line. VBEP-EDATU.
The relationship between item (VBAP ) and schedule line ( VBEP )is 1 to many. But there will be mutiple schedule lines only if you are using the scheduling functionality. Also note to check for confirmed quantity (VBEP-BMENG) to be greater than 0 and use that schedule lines EDATU date as Requested delivery date.
regards,
Advait Gode.

How to maintain the material master data in plant

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

How to control the data in data selection

Similar Messages

Maybe you are looking for