How to control the depreciation for revaluation from next month ?

Dear all,
I post current year ord. depreciation revaluation via trx. ABAW (Bal. Sheet Revaluation), and the general ledger will be updated after depreciation run.
In our client, the scenario is  AFAB (dep run) --> ABAW (revaluation) --> AFAB (dep repeat run).
Now my problem is I want the revaluation value be depreciated next month and the second AFAB just for general ledger posting.   I have set the period control '11'(next month) for revaluation but  it doesn't work, the second AFAB still generates both G/L and depreciation posting.
How can I control the revaluation depreciation from next month?
Thanks for your help.

Hi,
we have used a different approach. We run two separate depreciation areas:
01 - ordinary depreciation
03 - revaluation
We maintain two complete streams of data. 01 is linked to the original acquisition value of the asset and depreciates normally.
03 is linked to the revaluation. Each month we recalculate the replacement value, revalue the accumulated depreciation and then run depreciation using transaction AFAB.
I don't think it will work in the way you described.
Kind regards,
Rudolf

Similar Messages

  • How to control the permission for reports in share folder?

    Hi Experts,
    In OBIEE 11.1.1.6.0.
    I have created two folders in share folder,one is sales folder which contains some sales reports,and the other is dashboard folder which contains some dashboard pages that have these sales reports.
    So I want to new users who do not access the sales folder, but can view the sales reports in dashboard pages.
    How to control the permission for reports in share folder? Thanks for your help.
    Note: Dashboard pages have whole sales reports for showing.

    Hi User,
    1. Give access to the users for all reports.
    2. Give No Access to Retail Folder
    3. GIve read or full access to dashboard folder.
    To set the permission , click on the object/folder bottom left you will find Permission. you set there.
    Mark if correct,
    fiaz

  • HT6413 Please stop charging  for iCloud from next month.

    Please stop charging for iCloud from next month.

    For details of downgrading please see:
    http://support.apple.com/kb/ht4874
    and scroll down to 'Downgrade your iCloud storage plan' for instructions for OSX, iOS, and Windows.

  • How to calculate the depreciation for an asset under repair for a month

    Hi,
    I have placed an asset (Laptop) into service 01.01.2013 and I have calculated the depreciation for the 1st period and in the second period 01.02.2013 the laptop is broken and which was sent to the service center and for that entire month no depreciation is calculated. I wanted to start the depreciation for the same asset on 01.03.2013.
    how to process for the depreciation for 3rd period and for the 2nd month what should be the activity of the asset?
    Please explain in detail.
    Thanks,
    Santhosh.

    Hi,
    If you do not want to post depreciation for an asset, then assign depreciation key 0000 for the asset.
    OR
    Use the asset shutdown option in field status group in time dependent tab.
    Regards
    Srinivas

  • How to reverse the Depreciation for the excess amount posted?

    Hi Gurus,
    We have uploaded the data last month from legacy system to SAP as below.
    The Fiscal year is Jan - Dec and gone live on June 28th 2009.
    Accumulated Depreciation was taken till Dec 2008.
    Ordinary Depreciation was taken from Jan 2009 to June 2009.
    But Ordinary depreciation is not up to date in SAP as the user miss out the 2 months depreciation for each Asset but this was already posted in legacy system. All the GL Balances have been uploaded as per the legacy system. Now system is taking the previous 2 months Depreciation along with the current month. If we run the Depreciation for the current month, the system will post excess amount as it includes previous 2 months Depreciation.
    Can any one kindly suggest the process to reverse the excess amount after Depreciation posted for the current month?
    Thanks much for the help.
    Early responses will be appreciated.
    Best Regards,
    JBC

    HI
    Few clarifications-
    1. you have posted two months dep in legacy , have you transferred that dep amount wth the ordinary dep transferred from jan to june?
           If yes, that means your last posted dep month is june and accordingly you have to set the last period (6) in the SPRO for asset data transfer specifications, so system will start calculating dep from the 7th period only and will not recalculate dep for last two months.Check the last posted period mentioned in SPRO.
    2.If you have uploaded wrongly your ordinary dep for current year , then that means your Asset accounting opening balance (migrated balance ) is not matching with your Trial GL upload as well, so you need to correct your asset accounting opening balances.
         For this you need to reset your company code status from 0 to blank ( tset data always allowed for asset data transfer). And then correct the values for current year ordinary dep posted from jan to june, also check the last posted dep period as above.
    3.However you may post writeup ttype 700 to adjust the excess dep posted by any reason, you can extract last two months dep posted values asset wise from legacy system if already posted, and post the writeups for the same value in current period using LSMW.
    Cheers
    Mukta

  • How to control the timeout for StreamSocket.ConnectAsync(), and StreamSocketListener.AcceptAsync()?

        I can not file API to do this.Ray_ni

    Hi Ray,
    Here is a simple sample...
    async void btnGetData_Click(object sender, RoutedEventArgs e)
    // separated all this out so it is clearer:
    //Create a socket
    StreamSocket aSocket = new StreamSocket();
    //Cancellation token is inspected to determine if the async method should be cancelled
    CancellationTokenSource cts = new CancellationTokenSource();
    //In this case, after 2 seconds... signal cancel
    cts.CancelAfter(2000);
    //get the operation
    StreamSocketConnectOperation op = aSocket.ConnectAsync(new Windows.Networking.HostName("localhost"), "22112", SocketProtectionLevel.PlainSocket);
    //Create a task and pass the cancellation token
    Task aTask = op.StartAsTask(cts.Token);
    try
    //kick off the task and wait for a result!
    await aTask;
    catch(TaskCanceledException tcEx)
    string a = "Task Cancelled: " + tcEx.Message;
    catch(Exception theEx)
    string b = "Exception: " + theEx.Message;
    finally
    string c = "done, still might have had an exception though";
    Enjoy!
    -Jeff
    Jeff Sanders (MSFT)

  • How much is the ETF for a smartphone?

    We have one smartphone (iphone) with verizon service and want to end service. Our contract is up in September. How much is the ETF for only having 3 months left?

    Here's the Info your Requesting..  More can be found through the Link I provided..  b33
    http://www.verizonwireless.com/b2c/support/customer-agreement
    If you cancel a line of Service, or if we cancel it for good cause, during its contract term, you'll have to pay an early termination fee. If your contract term results from your purchase of an advanced device, your early termination fee will be $350 minus $10 for each full month of your contract term that you complete. Otherwise, your early termination fee will be $175 minus $5 for each full month of your contract term that you complete. Cancellations will become effective on the last day of that month's billing cycle, and you are responsible for all charges incurred until then. Also, if you bought your wireless device from an authorized agent or third–party vendor, you should check whether they charge a separate termination fee.

  • How to control the bandwidth of my router WRT54G3G

    hi all
    plz i need to know how to control the bandwidth for all pc connect through the router ?
    thank you

    Logon to router’s setup page, click on “Applications & Gaming”, click on QoS…you can manage bandwidth using a QoS feature.

  • Toolkit for CreateJS: How to control the main timeline from outside the canvas.

    Hey Everyone,
    I'm currently trying to do something simple, but my animation breaks whenever I attempt to change my code. I have created a basic animation in Flash where an object moves from the left side of the canvas, to the right, and then loops from the last frame to the first frame. Nothing else. The animation is simply put on the main timeline. I exported the animation with Toolkit for CreateJS through Flash's extension and the animation runs as it should. I am trying to start and stop (restarting from the first frame) the animation with mouse over and mouse off events. I want the events to fire when moused over/off a div OUTSIDE the animation's canvas tag. Is this possible with CreateJS? I'm trying to figure out how to control the main timeline without being inside the canvas tag.
    Example HTML:
    http://www.thephotoncore.com/testing/example_test.html
    Example Code:
    <section id="container">
      <canvas id="canvas" width="550" height="400" style="background-color:#cccccc"></canvas>
      <section id="animation_control">
        <p>Roll over to start and stop animation.</p>
      </section>
    </section>
    Thanks again for the help!
    -DJ

    Hi DjPhantasy5,
    All movieclips on the stage are children of the stage,
    So on the "mouseover" all movieclips on the stage could be stopped with stop and on the "mouseout" all children could be restarted with gotoAndPlay like this:
    function Stop()
              if (stage && stage.children)
                        var i, l = stage.children.length;
                        for (i = 0; i < l; i++)
                                  var child = stage.children[i];
                                  if ("stop" in child)
                                            child.stop();
    function Restart()
              if (stage && stage.children)
                        var i, l = stage.children.length;
                        for (i = 0; i < l; i++)
                                  var child = stage.children[i];
                                  if ("gotoAndPlay" in child)
                                            child.gotoAndPlay(0);
    See http://www.liauw.nl/forums/adobe/djfantasy5/index.html
    But it is also possible to expose "ball1", for example, by adding it to the document.
    This can be done by adding code to "ball1" like so:
    /* js
    document.ball1 = this;
    Then the stopping of the animation would look like:
    function Stop()
         if ("ball1" in document)
              document.ball1.stop();
    etc.
    Have fun!
    Ronald

  • Reading from a file. How to ask the user for file name at run time????

    I have the code to read from a file but my problem is how to prompt the user for the file name at run time.
    import java.io.File;
    import java.io.FileNotFoundException;
    import java.util.InputMismatchException;
    import java.util.Scanner;
    public class FileRead {
        public static void main(String args[]) {
            Scanner scan = null;
            File file = new File("Results.txt");
            String number;
            try {
                scan = new Scanner(file);
                while (scan.hasNext()){
                number = scan.next();
                System.out.println(number);}
            catch (FileNotFoundException ex1){
                System.out.println("No such file");
            catch (IllegalStateException ex2){
                System.out.println("Did you close the read by mistake");
            catch (InputMismatchException ex){
                System.out.println("File structure incorrect");
            finally{
                scan.close();}
    }Any hints would be greatly appreciated. Thank you in advance

    I have read through some of the tutorials that you have directed me too and they are very useful, thank you. however there are still a few things that i am not clear about. I am using net beans 5.0 I have placed a text file named Results.txt into the project at the root so the program can view it.
    When I use the code that you provided me with, does it matter where the file is, or will it look through everywhere on the hard drive to find a match?
    This code compiles but at run time it comes up with this error
    run-single:
    java.lang.NoClassDefFoundError: NamedFile
    Exception in thread "main"
    Java Result: 1
    BUILD SUCCESSFUL (total time: 3 seconds)
    import java.util.Scanner;
    import java.io.*;
    class NamedFileInput
      public static void main (String[] args) throws IOException
        int num, square;   
        // this Scanner is used to read what the user enters
        Scanner user = new Scanner( System.in );
        String  fileName;
        System.out.print("File Name: ");
        fileName = user.nextLine().trim();
        File file = new File( fileName );     // create a File object
        // this Scanner is used to read from the file
        Scanner scan = new Scanner( file );     
        while( scan.hasNextInt() )   // is there more data to process?
          num = scan.nextInt();
          square = num * num ;     
          System.out.println("The square of " + num + " is " + square);
    }his is the code that i used. It is the same as the code you posted for me (on chapter 23 I/O using Scanner and PrintStream) Sorry im just really stuck on this!!

  • How to get the depreciation areas for an asset in particular period

    Hi frndz,
      how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
    Thanks and regards.
    Harisumanth.Ch

    Try table ANLB, then read ANLC.
    Regards.

  • How to control the looping time of the for loop in 10 microseconds in labview?

    I need to create a +/- 9 volt square wave with period of 20us using a D/A card (Not NI card). I can write command to the card using outport provide by Labview. Right now, I can generate square wave with 4ms period which is limited by the resolution of the wait until next ms icon I used inside the for loop. Could anyone tell me how to control the execution time of the for loop to about 10 us? Your help would be much appreciated.

    I'm not sure if this will hep, but this answer seems to answer this question
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000029410000&UCATEGORY_0=_30_%24_12_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=microsecond+resolution+1ms&USEARCHCONTEXT_QUESTION_S=0

  • Tax depreciation for vehicles from limited value in Poland

    Hi,
    for a polish company I have to define the depreciation for cars. In Poland is for vehicles  the start value for calculation of the tax depreciation lower then the acquisition value of depreciation area "book depreciation". The tax value is limited.
    The sample chart of depreciation for Poland is defined:
    01 Book depreciation
    02 Depreciation on tax limited value (cars)
    03 Non-deductible tax depreciation (cars)
    In rules for takeover was defined that depreciaition area 02 adoped the values of depreciation area 01.
    Depreciation area 03 is not a real depreciation area it is defined: 01 Book deprecition - 02 Depreciation on tax limited value (cars).
    I don't know the legally rule how to define the limitec tax value.
    My question is, how can I define the calculation of tax depreciation from a limited value?
    Thank you!
    Best regards
    Hubert

    Hi,
    this is not the aswere of my question.
    E.g. I have a care with acquisition of 25.000,-. The start value for calculation in depreciation area 01 is 25.000,-.
    The start value for calculation in depreciaiton area 02 is 20.000,-.. The tax limited value is 20.000,-.
    How can I define the system to calculate in deprecition area 02 with limited tax value 20.000,-?
    Thank you!
    Best regards
    Hubert

  • How to control the measure based on the related dimension.

    Hi Experts,
    In order to improve performance, I have created three kinds of time tables in DB,such as Year .Month, Day.
    Then import them into the physical layer in RPD, and combine them into one dimension in BMM.
    Actually, it has three level fact related with three time tables,so they are also dragged into one fact in BMM,and one column will be corresponding with three column derived from different Fact table in physical layer.
    So I want to know how to control the measure based on the related dimension.
    For example:
    when users drag the Year,Sales column, it will come from Year Dimension and Year Fact Table.
    when users drag the Month,Sales column, it will come from Month Dimension and Month Fact Table.
    when users drag the Day,Sales column, it will come from Day Dimension and Day Fact Table.

    Hi,
    Create a dimension Hierarchy, with Year >> Month >> Day Levels and
    Next Double click on Year Table LTS >> click on Ocntetnt Tab >> set as Year
    same way for Month LTS and Day LTS.
    So now when you select year column then server canknow which LTS to hit and Hits Year LTS.
    Mark If Helpfu/correct
    Thanks.

  • How to control the size of live data in Coherence?

    How to control the size of live data in Coherence?
    See the following statement:
    Pause times increase as the amount of live data in the heap increases. We recommend not exceeding 70% live data in your heap. This includes primary data, backup data, indexes, and application data.
    --Excerpted from http://coherence.oracle.com/display/COH35UG/Best+Practices                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
    Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

Maybe you are looking for