How to control the size of thumbnails in project assets

When i am looking at the thumbnails for project assets, how can i change their size from small to large

I do not believe that there is a way to change the size of the thumbnail display view in PrE 11. If so, I have not been able to find it.
Good luck,
Hunt

Similar Messages

How to control the size of live data in Coherence?

How to control the size of live data in Coherence?
See the following statement:
Pause times increase as the amount of live data in the heap increases. We recommend not exceeding 70% live data in your heap. This includes primary data, backup data, indexes, and application data.
--Excerpted from http://coherence.oracle.com/display/COH35UG/Best+Practices

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

How to control the size of SVG images in epub files?

There is unfortunately no support for SVG files in InDesign.
Most of my images in jpg convertes nicely, but the small ones do not.
Therefore I want to use SVG files which I have created in Illustrator.
But how do I set the size in the epub file? Right now, whatever I do, they come out too big and I don't know how to control the size.
Is there a program, like Sigil or other, that can place the image for me - I'm no html wizard you see....

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

How to control the size of Database's image

hi,
I have already saved image in database, & i also can retrieve image from database. But My problem is that when i save big image then it shows with it's original size. But i want to see its size what i want? But how this possible?i want to see it's small size. i cannot do it. I know how to control the image with ImageIO . But i don'nt know how to control the size of an image from database. I cannot do it. Please Help me.
Thanks
bina

Hi,
You can control the database size at technical setting level based on ur requirement. Field name is Size category.
Thanks.

How to control the size/position of LabVIEW DLL front panel in MFC application?

I would like to make a MFC application which loads a DLL generated by LabVIEW application builder. How can I control the size and position of the front panel in my MFC application? Thanks.

Did you build the DLL from Labview yourself? If so, you just add another VI to the list. This VI accepts the Title of a front panel and top,left,right,bottom value of the front panel (VI property WindowBond). I'm not familiar with building DLLs using Labview so I really could not help you on how to build the DLL, but I believe it can be done (multiple VIs as multiple functions in a single DLL).
To get the windows bonds for a vi, you need to use VI server property. Check out the examples under labview directory. There are plenty of them to demostrate how to use this feature.
Joe

How to control the size of the database

Hi all
Database size will gradually increase day by day is there any tool or possibility to control the size of the database.
Thanks in advance
Gowtham
Moderator message: not directly related to ABAP development, standard "basis" functionality, please have a look in the Netweaver forums.
Edited by: Thomas Zloch on May 23, 2011 9:16 AM

Hi,
You can control the database size at technical setting level based on ur requirement. Field name is Size category.
Thanks.

How to determine the size of an iMovie09 project?

Hello:
I recently created a nice video of about 2 hours in iMovie09. I "shared" it to iDVD but it was about 10% too big to burn. I went back to iMovie09 and removed some time to make the project smaller but how can I determine the size of my iMovie09 projects before I send them to iDVD? I know that both time and audio will affect the size of the iMovie09 project so the time of the video is not necessarily an accurate indicator.
Thanks!

Welcome to iMovie Discussions.
As long as your movie is under about 1hr 50 minutes it should fit on a DVD.
The thing which determines how much time is available on your DVD is usually the complexity of any Menus which you add in iDVD.
With a simple Menu, which may "eat up" 10 mins of space, you should have room for 1h 50mins of movie.
With complex, multi-level menus, your movie running time may be reduced by about 25 mins, or possibly more.
Keep menus simple, and you should have space for about 1hr 50mins. It's always running time which counts, NOT "size" (in GB) of your movie.

How to control the size and position of the region on a page?

I am trying to create welcome page for my client. I need to create a banner and place the login region in the cente of the page with a fixed width and height. How can I do this.
Thanks.
Satya

Hi,
Edit your region and go to region header of your region
and type this
region header
<table width ="100px" height = "100px">
<tr>
<td>
region footer
</td>
</tr>
</table>
you can customize your region position in this way...just use table tag attributes,,i hav egiven example of only height and width but you can use all the table attributes to customize your region like background color,back ground image,alignment etc..
hope this helps you,
Regards,
Jitendra

How to conrol the size of Node Manager error logs

How to control the size of Node manger error.logs in Weblogic 8.1?

Log rotation is disabled by default, but can be enabled by setting LogLimit and LogCount in nodemanager.properties
For more information check [http://download.oracle.com/docs/cd/E11035_01/wls100/nodemgr/java_nodemgr.html]
I hope this helps

How can I control the size of a cell in the GridBagLayout?

Hi,Swing Gurus
I am developing a swing-based program using JBulider5 enterprise.
It seems to me that the GridBagLayout is really a hard nut!
How can I control the size of a cell in the GridBagLayout?
It seems that I cann't control the size of a cell directly.
But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
Thx in advance!
Regards,
Justine

hi,i have not done what you are asking but there are fields like
COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

How to change the size of control´s prompt?

No matter the size of data to be displayed in the view suface prompt, the controls have the same size.
Does anyone here know how to change the size of control in surface prompt?

HI,
In order to change the size of a radio button... one way you may consider is to Customise the Radio Button.
Place a Radio Button (RB) on the FP of a VI, Right-Click the RB > Advanced > Customise...
Click the Mode Button (most Left button) for Edit Mode
Right-click the radio button (the round image) now, you will see a list of actions i.e. Copy to clipboard, import picture ...You will see Four images under the 'Picture Item', those are the images that you will need to replace.
Prepare Four Images of the similar but larger expected size
*** Copy the 1st new image to clipboard. Back to the Picture Item and select 1st image. Then, select Import Picture (to replace the existing image)
Repeat *** for all four images.
Once done, change the mode back to original. Save the *.ctl
You are now ready to use the customised radio button!
Quick sample attached (sorry for the poor images created )
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
IFK_RButton_Large.ctl ‏11 KB

How can I control the size of the af:InputText?

Hi,
How can I control the size of the 'af:InputText' on the UI, without using columns & rows attributes. Even though I am using width & height attributes, the changes are not getting reflected in the UI.
Thanks,
Rajesh.

Hi,
It is inside a 'af:PanelBox'. So, the parent container also determines the size of the child? Here I need a create a 'pidgin chat window' kind of an interface with a fixed size top-level container, inside which I willl put all my components. The code looks something like this:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" partialTriggers="it1">
<af:messages id="m4"/>
<af:form id="f1" partialTriggers="it1">
<af:panelBox text="" id="pb1" background="dark" type="stretch"
titleHalign="start" ramp="highlight"
inlineStyle="width:350pt; height:500pt; margin:0.5pt; padding:0.5pt; border-width:0.5pt; "
partialTriggers="it1">
<af:spacer height="15pt" id="s1"/>
<af:inputText id="ot1"
columns="82" rows="25" wrap="hard"
partialTriggers="it1"
value="#{ChatClientBean.chatLog}"
binding="#{ChatClientBean.outputChatTextBox}"
visible="false">
</af:inputText>
<af:spacer height="27pt"/>
<af:inputText id="it1" inlineStyle="width:200pt; height:100pt;"
valueChangeListener="#{sessionScope.ChatClientBean.sendMessage}"
autoSubmit="true" partialTriggers="it1"
binding="#{ChatClientBean.inputChatText}"/>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks,
Rajesh.

And, in general, how can I control the size of the firefox window?

The Firefox window has become bigger, even before I clicked "full screen."
So again, how do I control the size of the window/screen?
== This happened ==
Every time Firefox opened

when opening a link within a window, I want it to open smaller so I can see the window behind it. How can I control that?

How do I control the size of my photos in iWeb?

Hello
I wish to ask if it is possible to control the size of a photo in iWeb when publishing photos.
What I want is that people can press on any photo in my collection and see it in high resolution. But at the moment it is messing with my photos. Some come up tiny regardless of them being a 4MB Pixel shot, and most of them if not all of them are restricted to one size...
Thank you...
-Steve

iWeb resizes photos in the following cases -
When using the of the photograph templates where you drag and drop your pictures:
1) Size is capped at 800px x 800px for the slide
2) Files are compressed, usually ~120KB\
3) New thumbs are created (the small image you click on); those tend to be 35-45KB.
If you add a shadow, reflect or graphic option - odds are iWeb will convert your JPEG into a PNG and file size mushrooms. I've been created very compact banners, but due to PNG coversion the size has gone up by 6-8x...
I have NOT looked into just adding a photo to page and seeing what happens to the file size. Most of my tug of war has been with slide show and trying to understand why the 300-500KB files I was using were looking so bad. Now that I know iWeb is doing, I can sort of work around it.
It doesn't mean I'm happy. I'm going to add a gallery page with my favorites, format for roughly 1000x800 and keep the file size around 400 KB. I do all the file resizing in Photoshop CS2.
To put all this in perspective, i have around 325 picture uploaded - most were resized to 450 KB for the web. That 146 MB just for pictures. Add another 10 MB for web content, etc. I thought ~160MB should be used up on the iDisk. Due to iWeb's compression, usage is only 70 MB for this site.
www.pebbleplace.com

How to set the size of an image

hi,
I have a database which contain an image. now i want to retrieve this image & want to show this image in my jsp page as user's defined size. I have following code. My following code shows the original size of an image. Now i want to see different size of this image. How is this possible? I know control the size of this image after saving this image
in a file. but i want to control the size of this image without saving this image in a file? IS it possible ? Is there anybody can help me?
Please help me.
ResultSet rs = null;
PreparedStatement ps=null;
     InputStream sImage=null;
     byte[] imagebyte=null;
     String var;
     String name=request.getParameter("RegName") ;
     String image =request.getParameter("ImageFile");
     out.println(name);
     out.println(image);
     out.println();
     ps=con.prepareStatement("insert into t_image (ID, Image) values(?,?);");
     File file =new File(image);
    FileInputStream in = new FileInputStream(file);
    ps.setInt(1,1234);
    ps.setBinaryStream(2,in,(int)file.length());
    ps.execute();
    rs =stm.executeQuery("select Image from t_image where ID=1234");
    if(rs.next()) {
   imagebyte =rs.getBytes(1);
    response.reset();
    response.setContentType("image/jpeg");
    %>
<%
response.getOutputStream().write(imagebyte);
%>
<%
    response.flushBuffer();
%>With regards
Bina

hi,
I have a database which contain an image. now i
want to retrieve this image & want to show this
image in my jsp page as user's defined size. I have
following code. My following code shows the original
size of an image. Now i want to see different size
of this image. How is this possible? I know control
the size of this image after saving this image
n a file. but i want to control the size of this
image without saving this image in a file? IS it
possible ? Is there anybody can help me?This has nothing to do with JDBC; you can only store and retrieve the image you have and there's no image manipulation functions in JDBC (nor should there be).
I can see 2 options:
1) serve the image file as is, but in the jsp that writes the html that contains the "<img>" tag that gets it, use the "height" and/or the "width" to scale the suppied image to presentation size you want.
2) find some image manipulation code that will convert the image into the size you want
Option 1 will work well if the problem you have is merely refining the image size for presentation. Option 2 is your only coice if it's the image files size itself you really want to change, not just it's appearance on a page.

How to control the size of thumbnails in project assets

Similar Messages

Maybe you are looking for