How to control the size/posit​ion of LabVIEW DLL front panel in MFC applicatio​n?

I would like to make a MFC application which loads a DLL generated by LabVIEW application builder. How can I control the size and position of the front panel in my MFC application? Thanks.

Did you build the DLL from Labview yourself? If so, you just add another VI to the list. This VI accepts the Title of a front panel and top,left,right,bottom value of the front panel (VI property WindowBond). I'm not familiar with building DLLs using Labview so I really could not help you on how to build the DLL, but I believe it can be done (multiple VIs as multiple functions in a single DLL).
To get the windows bonds for a vi, you need to use VI server property. Check out the examples under labview directory. There are plenty of them to demostrate how to use this feature.
Joe

Similar Messages

  • How to control the size of live data in Coherence?

    How to control the size of live data in Coherence?
    See the following statement:
    Pause times increase as the amount of live data in the heap increases. We recommend not exceeding 70% live data in your heap. This includes primary data, backup data, indexes, and application data.
    --Excerpted from http://coherence.oracle.com/display/COH35UG/Best+Practices                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
    Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

  • How to control the size of SVG images in epub files?

    There is unfortunately no support for SVG files in InDesign.
    Most of my images in jpg convertes nicely, but the small ones do not.
    Therefore I want to use SVG files which I have created in Illustrator.
    But how do I set the size in the epub file? Right now, whatever I do, they come out too big and I don't know how to control the size.
    Is there a program, like Sigil or other, that can place the image for me - I'm no html wizard you see....

    In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
    Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

  • How to control the size of Database's image

    hi,
    I have already saved image in database, & i also can retrieve image from database. But My problem is that when i save big image then it shows with it's original size. But i want to see its size what i want? But how this possible?i want to see it's small size. i cannot do it. I know how to control the image with ImageIO . But i don'nt know how to control the size of an image from database. I cannot do it. Please Help me.
    Thanks
    bina

    Hi,
    You can control the database size at technical setting level based on ur requirement. Field name is Size category. 
    Thanks.

  • How to control the size of the database

    Hi all
    Database size will gradually increase day by day is there any tool or possibility to control the size of the database.
    Thanks in advance
    Gowtham
    Moderator message: not directly related to ABAP development, standard "basis" functionality, please have a look in the Netweaver forums.
    Edited by: Thomas Zloch on May 23, 2011 9:16 AM

    Hi,
    You can control the database size at technical setting level based on ur requirement. Field name is Size category. 
    Thanks.

  • How to increase the size of Photoshop Elements 8 MENU and PANEL fonts?

    How do I increase the size of Adobe Photoshop Elements 8 MENU, PANEL and other fonts used in Photoshop Editor?
    Does anyone know of registry fix or other solution?
    Thanks
    FYI:
    I've increased windows XP display fonts to 140 dpi, only Photoshop Elements 8 fonts did NOT increase, such as menu, panel and drop down fonts -- they remain very small and almost unreadable.  All other programs menu fonts did increase.

    I’m sure Adobe try to make their products as accessible as possible to all sections of the community although by its very nature certain adjustments to fine detail require the use of a mouse.
    However where possible keyboard short cuts are provided, as an alternative to the drop down menus. For example to adjust levels rather than clicking Enhancements>>Lighting>>Levels you can simply press Ctr+L.
    Importantly it’s possible to zoom in and out on any image in the Editor using Ctr plus or Ctr minus.
    That's the only suggestion I can think of.

  • How to control  the size of thumbnails in project assets

    When i am looking at the thumbnails for project assets, how can i change their size from small to large

    I do not believe that there is a way to change the size of the thumbnail display view in PrE 11. If so, I have not been able to find it.
    Good luck,
    Hunt

  • How to Control the Valves and Pump with Labview?

    I have started a new project where I have to control the valves operation through Labview 2009,using PXI 1031, NI 5105(Digitizer) and NI 6251(M-series DAQ).
    The valves I need to control using the labview are:
    a) Pressure Reducing Valve (open & close)
    b) Remote control Valve(On & Off) with in-built actuator
    c) Flow control valve(open, semi open, partially open, semi close, partially close, fully close), 1%, 2%, 3%..etc
    d)saftey valve (opening closing depending on increase in pressure from certian limit)
    I hav eto control
    a) Hydraulic pump operation with in built gear-box
    Please let me know, how should l develop the VI for all? How to get started?, any helpful links? If there is any example code?
    Its little urgent !

    If you are not familiar with LV, I would suggest you go through the tutorials. Then take the leap and figure out how to use Action Engines and State Machines (search any of the terms I used that don't understand, there are a zillion threads on them).
    Then...
    Sit down and write stand-alone testers for each of the widgets you are going to control monitor etc.
      These testers will give you an idea if they really work the way you think, their character, and will serve as a "Sanity Check" when you think you are going crazy  durring development.
    THen integrate the tester so they can all work at the same time. This will become a utility screen that will serve you well when maintaining the critter latter in its life.
    Only then...
    write out a complete set of state diagrams that describe what you plan to do (don't cheat! ) and walk through them in your head until you are cetain it will all work blah blah blah.
    This step is optional but highly recomened...
    Compose a detailed set of documemtns describing what you have in mind and post them here (include the images, they will get many mor readers) and let people  pick aprat your design.
    When you have a final design, use everything you learned along the way to be a kick-ass developer.
    Along the way post distinct well defined question on this site and as long as it looks like you are trying someone will probably reply and get you going again.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How to update the variables in sub-vi on main front panel?

    hi~
    The problem is to display variables in Sub vi on main front panel.
    What should I do?메시지가 04-07-2005 03:14 AM에 julitan에 의해 편집되었음
    Attachments:
    main_.vi ‏14 KB

    You probably want the slide to update while the while loop in the subVI is running, so you can't simply wire an output from the subVI to the main VI. So you are going to have to use some form of communication between the two VI's other than a hard wire. For this simple case I think I would recommend using a global variable. You could also use DataSocket or even write the value to disk, but using a global is probably the easiest method for this case. I've attached your modified VI's. Let me know if this works for you.
    Robert Mortensen
    Software Engineer
    National Instruments
    Attachments:
    global.zip ‏45 KB

  • How to control the size and position of the region on a page?

    I am trying to create welcome page for my client. I need to create a banner and place the login region in the cente of the page with a fixed width and height. How can I do this.
    Thanks.
    Satya

    Hi,
    Edit your region and go to region header of your region
    and type this
    region header
    <table width ="100px" height = "100px">
    <tr>
    <td>
    region footer
    </td>
    </tr>
    </table>
    you can customize your region position in this way...just use table tag attributes,,i hav egiven example of only height and width but you can use all the table attributes to customize your region like background color,back ground image,alignment etc..
    hope this helps you,
    Regards,
    Jitendra

  • How to conrol the size of Node Manager error logs

    How to control the size of Node manger error.logs in Weblogic 8.1?

    Log rotation is disabled by default, but can be enabled by setting LogLimit and LogCount in nodemanager.properties
    For more information check [http://download.oracle.com/docs/cd/E11035_01/wls100/nodemgr/java_nodemgr.html]
    I hope this helps

  • How can I control the size of a cell in the GridBagLayout?

    Hi,Swing Gurus
    I am developing a swing-based program using JBulider5 enterprise.
    It seems to me that the GridBagLayout is really a hard nut!
    How can I control the size of a cell in the GridBagLayout?
    It seems that I cann't control the size of a cell directly.
    But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
    Thx in advance!
    Regards,
    Justine

    hi,i have not done what you are asking but there are fields like
    COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

  • How to change the size of control´s prompt?

    No matter the size of data to be displayed in the view suface prompt, the controls have the same size.
    Does anyone here know how to change the size of control in surface prompt?

    HI,
    In order to change the size of a radio button... one way you may consider is to Customise the Radio Button.
    Place a Radio Button (RB) on the FP of a VI, Right-Click the RB > Advanced > Customise...
    Click the Mode Button (most Left button) for Edit Mode
    Right-click the radio button (the round image) now, you will see a list of actions i.e. Copy to clipboard, import picture ...You will see Four images under the 'Picture Item', those are the images that you will need to replace.
    Prepare Four Images of the similar but larger expected size
    *** Copy the 1st new image to clipboard. Back to the Picture Item and select 1st image. Then, select Import Picture (to replace the existing image)
    Repeat *** for all four images.
    Once done, change the mode back to original. Save the *.ctl
    You are now ready to use the customised radio button!
    Quick sample attached (sorry for the poor images created )
    Ian F
    Since LabVIEW 5.1... 7.1.1... 2009, 2010
    依恩与LabVIEW
    LVVILIB.blogspot.com
    Attachments:
    IFK_RButton_Large.ctl ‏11 KB

  • How can I control the size of the af:InputText?

    Hi,
    How can I control the size of the 'af:InputText' on the UI, without using columns & rows attributes. Even though I am using width & height attributes, the changes are not getting reflected in the UI.
    Thanks,
    Rajesh.

    Hi,
    It is inside a 'af:PanelBox'. So, the parent container also determines the size of the child? Here I need a create a 'pidgin chat window' kind of an interface with a fixed size top-level container, inside which I willl put all my components. The code looks something like this:
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
    xmlns:f="http://java.sun.com/jsf/core"
    xmlns:h="http://java.sun.com/jsf/html"
    xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
    <jsp:directive.page contentType="text/html;charset=UTF-8"/>
    <f:view>
    <af:document id="d1" partialTriggers="it1">
    <af:messages id="m4"/>
    <af:form id="f1" partialTriggers="it1">
    <af:panelBox text="" id="pb1" background="dark" type="stretch"
    titleHalign="start" ramp="highlight"
    inlineStyle="width:350pt; height:500pt; margin:0.5pt; padding:0.5pt; border-width:0.5pt; "
    partialTriggers="it1">
    <af:spacer height="15pt" id="s1"/>
    <af:inputText id="ot1"
    columns="82" rows="25" wrap="hard"
    partialTriggers="it1"
    value="#{ChatClientBean.chatLog}"
    binding="#{ChatClientBean.outputChatTextBox}"
    visible="false">
    </af:inputText>
    <af:spacer height="27pt"/>
    <af:inputText id="it1" inlineStyle="width:200pt; height:100pt;"
    valueChangeListener="#{sessionScope.ChatClientBean.sendMessage}"
    autoSubmit="true" partialTriggers="it1"
    binding="#{ChatClientBean.inputChatText}"/>
    </af:panelBox>
    </af:form>
    </af:document>
    </f:view>
    </jsp:root>
    Thanks,
    Rajesh.

  • And, in general, how can I control the size of the firefox window?

    The Firefox window has become bigger, even before I clicked "full screen."
    So again, how do I control the size of the window/screen?
    == This happened ==
    Every time Firefox opened

    when opening a link within a window, I want it to open smaller so I can see the window behind it. How can I control that?

Maybe you are looking for

  • How do I pair my new Mac mini (mid 2011) and white Apple Wireless Keyboard (2003)?

    I just bought a new Mac mini (mid 2011) and can not set it up via my Apple Wireless Keyboard (2003). I'm disheartened but not surprised that my Bluetooth 4.0 Mac isn't backwards-compatible with my Bluetooth 1.0 keyboard. But I can't find any document

  • 2012 Mac Mini photoshop

    I have I 2012 Mac mini that I upgraded to mavericks about a month ago. I installed photo shop cs6 and it is slow I add text to a a banner and it says rendering type and it takes like 45 secs. Everytime I move the text it sYs rendering type takes anot

  • Update screwed everything up

    I recently updated my 3GS to 4.0. What a major mistake. Now my address book has phone numbers assigned to the wrong people, the phone calls out by itself, the voice dial doesn't work correctly (I tell it to call "home" and it answers back "calling Fr

  • Why won't tabs name?

    Every three or four times I open Firefox tabs will not have names and just say 'connecting' continusly. Changing the theme fixes it but only for another three openings. Is this a bug or something that can be fixed easily? I am using widows 7 64bit.

  • ORA-12560:  TNS: protocol adapter error - startup mount on windows

    hi all, I want startup the database with mount option on windows. The OracleServiceORCL is stopped. I need to startup mount, but I get the error: ORA-12560: TNS: protocol adapter error. In Linux this task is easy, but on windows I cannot connect to d