How to Control the width of the Filter row in Table View

Hi !
I have a Table View with filter='application'. The filter works fine but I am not able to control the width of the columns of the tableview .
On filtering, if there are not items in the table view the columns shrink to the minum width....and it looks very odd.
Can you help me how to control the width of the Filter-Row in Table Veiw.
Thanks and Best Regards,
Bindiya

Hi Raja,
"FIXEDCOLUMN" did not help in the width of the column, but it just showed all the rows merged in the column.
I have a cloumn called "COUNTRY" and its width is set to "20". The Filter of the column "COUNTRY" is a dropdownlist whos value is update with new values.
On filtering if there is any row visible then the column width is adjusted to the maxmimum length of the dropdownlist ( this is because of the "EDIT" attribute in column definition ). But if there is no rows visiblel for the selected filter value then the filter row shrinks to the width = "20" and the dropdownlist is not visible completely.
Need to know how to control the width of the FILTER column.
Thanks and Best Regards,
Bindiya

Similar Messages

How to control the width of the columns in a table in the oaf page?

hi,
We have a requirement to adjust the width of the columns of the table so that they are in line with the width of the page.
Please do share any feasible solution.
thanks,
Danish

try to personalize and set the width property of item.
else use below code in Controlller.
1) public class wyseQotLinesCOEx extends QotLinesCO
public CSSStyle cellUpperCase;
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
2)
get handle of inputitem as inputbean;
cellUpperCase = new CSSStyle();
cellUpperCase.setProperty("width","50");
if (inputbean != null)
{ inputbean.setInlineStyle(cellUpperCase);
}

How to change the width of the whole portlet layout?

Dear all,
As we know, now the width of portlet layout has set to 100%. But there is a new requirment from my customer that the width of the whole portlet layout view must be set to 750px.
So I tried to edit the css file and I found a block:
#pt-portal-content-view
     margin-top: 0px;
     width: 100%;
I tried to change the width to 750px, but nothing happened.
I want to know the way to change the width, thank you all!
Regards,
finall
OK,I have found the place to do it:
.portalContent          {
     display: block;
     width: 750px;
I set to 750px,then it works.:-)
But another question, how to make the content align to the center? I tried a stupid method, add margin-left:
.portalContent          {
     display: block;
     width: 750px;
     margin-left: 120px;
In 1024 X 768, it's ok, but it don't work well in 800 X 600.
When I set the all content width to 750px, I tried the three columns view, the portlet still run over the border.If there is any way to control this? thank u in advance!
Regards,
finall
Edited by finall1980 at 02/01/2007 10:09 PM

Try this:
.portalContent {
display: block;
width: 750px;
margin: auto; /* for properly-implemented browsers */
text-align: center; /* for IE 6 */
As for running over the 750px, there's nothing you can do about that other than actually narrowing the columns AND making sure that your portlet authors don't produce content that's too wide.
Chris Bucchere | bdg | [email protected] | http://www.thebdgway.com

How to increase the width of the drop down list box in SSRS multi value parameter

Hi,
I am using SSRS 2012. I have a parameter, which accepts multi value.
The width of the drop down list box is very small, and the user need to scroll to the right to view the complete view of the content in the list box. But, if I don't use multi value then the length is good. Kindly suggest how to I increase the width
of the list box when it set to multi value parameter.
Thanks in advance,
Mahalengam Arumugam

Hi Mahalengam,
After testing the issue in my local environment, I can reproduce it. When the values for a single parameter are too long, the drop-down list of the parameter will automatically enlarge to an appropriate size. While the values for a multiple parameter are
too long, we need to scroll to the right to view the complete view of the content in the list box in SSRS 2008. But in SSRS 2008R2 and SSRS 2012, we can directly drag the black control at the bottom of the list box to control the size.
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Hi Katherine,
Thanks for your reply. I understood we need to drag the list box to a maximum size to view the contents.
But, this seems an additional task, i know this is a limitation in the current version of SSRS and hope it will be resolved in the next versions.
Thanks for your efforts,
Mahalengam Arumugam

How to change the width of the bar of bar charts?

Hi,
I am using Crystal Reports 11.
I created some stacked bar charts. Now, I want to change the width of the bar. Some one told me that I can't do that because it's totally controlled internally by Crystal Reports.
Really?
If could, how could I do?
Thank you in advance.

Hi,
The only way you can set the width of the bar is by going to Chart Options (Right-click Chart in Preview Mode > Chart Options > Appearance tab > Decrease the Gap Width).
Hope this helps!
-Abhilash

How to change the width of the scrollbar

how to change the width of the scrollbar,
I wanted to have a large scrollbar in all controls (for a touch screen app lets say) then is that possible?
Either through CSS, code,
skins anything really... Any ideas?
Thanks in advance.

Hi,
horizonatal(vertical)ScrollBar.width - in AS/MXML code
horizontal(vertical)ScrollBarStyleName - for style. But I'm not sure that width getted from css.

How to make a JPanel containing buttons take up the width of the window?

I'm creating a GUI and I have a button group that I want to be the width of the window. I have another JPanel on the same window that doesn't have a button group in it and it takes up the width of the window. I don't think I'm doing anything differently creating the two, but I need consistency.
The best way I can explain this is with code, so I created an example of what I am doing here:
import java.awt.*;
import javax.swing.*;
public class test extends JFrame {
     public test() {
          JPanel win = new JPanel();
          JPanel buttonsPanel = new JPanel();
          JPanel statusPanel = new JPanel();
          win.setLayout(new BoxLayout(win, BoxLayout.Y_AXIS));
          buttonsPanel.setLayout(new BoxLayout(buttonsPanel, BoxLayout.Y_AXIS));
          statusPanel.setLayout(new BoxLayout(statusPanel, BoxLayout.Y_AXIS));
//          createRadioButtonsPanel
          ButtonGroup buttons = new ButtonGroup();
          JRadioButton currentMap = new JRadioButton("option1", true);
          JRadioButton newMap = new JRadioButton("option2");
          JRadioButton noMap = new JRadioButton("option3");
          buttons.add(currentMap);
          buttons.add(newMap);
          buttons.add(noMap);
          buttonsPanel.add(currentMap);
          buttonsPanel.add(newMap);
          buttonsPanel.add(noMap);
          buttonsPanel.setBorder(
                    BorderFactory.createTitledBorder("Create: "));
//           createStatusPanel
          JLabel statusLabel = new JLabel("Loading...");
          statusLabel.setBorder(BorderFactory.createLoweredBevelBorder());
          statusLabel.setPreferredSize(new Dimension(400,20));
          statusLabel.setMinimumSize(new Dimension(400,20));
          statusLabel.setMaximumSize(new Dimension(400,20));
          statusPanel.add(statusLabel);
          JPanel statusButtons = new JPanel(new FlowLayout(FlowLayout.RIGHT));
          JButton pauseSearch = new JButton("Pause");
          JButton cancelSearch = new JButton("Cancel");
          statusButtons.add(pauseSearch);
          statusButtons.add(cancelSearch);
          statusPanel.add(statusButtons);
          statusPanel.setBorder(BorderFactory.createTitledBorder("Status: "));
          win.add(buttonsPanel);
          win.add(statusPanel);
          getContentPane().add(win);
          pack();
          setVisible(true);
     public static void main(String args[]) {
          test s = new test();
}When I compile and run this class I get this window:
http://img136.imageshack.us/img136/1538/exampleek5.png
You see how on the bottom, "Status" JPanel takes up the entire width of the window? When the window is resized, the border is also resized. I would love to have the top "Create" JPanel have the same behavior. How do I do this?
Thanks in advance!

It can get confusing when using the BoxLayout. The box layout takes into consideration the X alignment of the components as well as the minimum and maximum lengths.
So I suggest you read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/layout/box.html]How to Use Box Layout for examples and explanations on how these values are used in the layout process.
It may be easier to use a BorderLayout for the high level layout manger, since it will resize a components width when added to the NORTH, CENTER or SOUTH.

Allow the user to control the width of the edit forum post input box

I would like to control the width of of the edit-forum post input box. This could be:
automatically adjust the width of the box so that the box doesn't run off the right edge of the window.
have a user global preference to set the preferred width
at least, allow the user to change the width via the change size icon. The three horizontal bars at the lower left of the input box. You can adjust the vertical dimension, but not the horizontal. TenFourFox 4.0.1. This is probably being blocked for some obscure reason.
Here is an example of an over extended right margin:
Curiously enough, the "software" let's me adjust the width & height of the add reason to edit text, but not adjust the width of the more important edit text box.
Robert

Testing
Standard Reply box can be height adjusted but not width.
Same with Advanced Editor
No Adjustment at all in HTL Editor
Edit.
The Edit uses the Advanced Editor
Only Height Adjustment again.
I do seem to remember someone posting about the width and saying they could drag it over the edge of the right hand edge (Into the grey surround)
This may have been a post in the lounge.
It didn't actually try it at the time but have played with it since and have not seen it.
Maybe it is something they "Fixed" in both senses of the word.
Second edit.
I can't alter the box that currently reads "Message Edited by:- ..."
I also can't get this box to accept New lines (they appear in the box but don't post that way)
Corrected Spelling
9:51 PM Wednesday; May 11, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)
Message was edited by: Ralph Johns (UK)
and new line with a line space as well

How to increas the width of the Table in OBIEE Report

Hi ,
I am creating a OBIEE report, the report has table and 30 column in it. When I am viewing the report in an excel file , its appearing good but the width of the table is so small if I am viewing the same in internet explorer/PDF .I dont know how to increase the width of the table. Could you please sort this issue out.
Thanks
Govindan P

- you can increase the width of a column -> column format values -> Additional Formatting Options
increase the width:
- Report level:
result tab -> Click on Format container of Table -> Additional Formatting Options
u can assign value width : 500 height:.....
- dashboard level:
Edit options -> section -> Format section -> Additional Formatting Options
here also u can change the width
u can assign value width : 500 height:.....
pls mark it helps....
Edited by: 979481 on Feb 6, 2013 1:25 AM

How can I enlarge only the width of the submenus in my spry horizontal menu bar?

The text in my submenus is hanging off the menu itself, but I
can't change the size of the parent menus. The submenus can be
wider than the parent menus, that's fine. That's what I what,
actually.
I've tried for two days now to figure this out and I'm really
stuck and would appreciate any input.
Thank you!

"lighteyedbaby" <[email protected]> wrote in
message
news:go4kuq$a6a$[email protected]..
> The text in my submenus is hanging off the menu itself,
but I can't
> change the
> size of the parent menus.
Please stop posting the same question in multiple threads. It
wastes
everyone's time, including your own. I have told you in
another thread
which selectors control the width of the submenus.
David Powers
Adobe Community Expert, Dreamweaver
http://foundationphp.com

How do I change the width of the x-scrollbar for a waveform graph?

I have a LV7.1 application that contains a waveform graph and must be usable on several PC with widely varying screen resolutions. I have decided to position and scale the front panel objects programatically, including the graph itself. The appearance of the graph is satisfactory on all screens, except for the x-scrollbar. The width of the x-scrollbar does not change when I change the size of the graph. I cannot figure out how to change the width of the scrollbar programatically to match the adjusted size of the graph. Any suggestions?
Regards,
Chris

Chris,
I don't think that you can change the width of the x axis scroll bar programatically. One thing you could do though is create your own scrollbar and change it's properties as your program runs. I wrote a quick example of how you could do this and I've attached it to this thread.
I hope this helps,
Justin D.
Applications Engineer
National Instruments
Attachments:
ChangeXScrollbar.vi ‏116 KB

How to change the width of the variable screen?

Hi
like in the subject mentioned i need to know how i can change the width of the variable screen....
right now i have to scroll if i want to see the right part auf the variable screen...
maybe i can change the width with css?

Hi,
Using CSS specify the table width for the variable screen and include the Css in the header section of the table.

How to change the width of the EditForm.aspx and NewForm.aspx for both new and edited list entries?

How to change the form widths for the EditForm.aspx and NewForm.aspx files that display both new and edited list entries?

Hi ,
According to your description, my understanding is that you want to modify the width of the New Form and Edit Form of a list in SharePoint 2010 .
1.Go to your SharePoint site -> your list.
2.In top ribbon click List tab(List Tools).
3.Towards right you will see option as Form Web Parts, click on it, the three forms will be listed there [New Form, Display Form, Edit Form].
4.Select the one on which you want to increase the width/height.
5.It will open in edit mode, click on Add a Web Part.
6. Click on Forms [Categories] => HTML Form Web Part.
7.After adding the HTML Form Web Part, click on Edit WebPart.
8.Click on Source Editor, Remove all code from it and put an empty HTML table with width and height as per your requirement ex. to increase width
<TABLE WIDTH="800px">
<TR><TD></TD></TR>
</TABLE>
9.Save the form and check out your respective modal by clicking on the same in your list view.
Reference:
http://sharepoint.stackexchange.com/questions/40580/how-to-modify-width-of-standard-dialog-form-sharepoint-2010
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to decrease the width of the border line of a table in smartform in 4.7

hi all,
i want to decrease the width of the border line of a table in smartform in 4.7 version. how can i do it? plz reply.

Hi,
When u r going to create a table in forms it will show the all details regarding the tables
like -> color
-> width etc...
From there u can do that .
u can also select the table format as all ready defined formats i.e available in he same screen.

How to increase the width of the column in Tableview

Hi ALL,
How to increase the width of the column in tableview?I have name column where big name is displaying in rows.Does any one have any idea how to increase the width of the column dynamically in tableview.Please respond its little urgent.
Thanks in advance

Hi Peter,
Here is my Dynpage
package com.ust.jcatotable;
import java.awt.Event;
import javax.resource.cci.MappedRecord;
import javax.resource.cci.RecordFactory;
import com.sapportals.connector.connection.IConnection;
import com.sapportals.connector.execution.functions.IInteraction;
import com.sapportals.connector.execution.functions.IInteractionSpec;
import com.sapportals.connector.execution.structures.IRecordSet;
import com.sapportals.htmlb.DropdownListBox;
import com.sapportals.htmlb.event.TableNavigationEvent;
import com.sapportals.htmlb.page.DynPage;
import com.sapportals.htmlb.page.PageException;
import com.sapportals.portal.htmlb.page.JSPDynPage;
import com.sapportals.portal.htmlb.page.PageProcessorComponent;
import com.sapportals.portal.ivs.cg.ConnectionProperties;
import com.sapportals.portal.ivs.cg.IConnectorGatewayService;
import com.sapportals.portal.ivs.cg.IConnectorService;
import com.sapportals.portal.prt.component.IPortalComponentContext;
import com.sapportals.portal.prt.component.IPortalComponentProfile;
import com.sapportals.portal.prt.component.IPortalComponentRequest;
import com.sapportals.portal.prt.component.IPortalComponentResponse;
import com.sapportals.portal.prt.runtime.PortalRuntime;
public class Display extends PageProcessorComponent {
public DynPage getPage(){
     return new DisplayDynPage();
public static class DisplayDynPage extends JSPDynPage{
     private Object formatFlag;
     public static IConnection connection ;
     private IPortalComponentRequest request;
     private IPortalComponentContext context;
     private IPortalComponentProfile profile;
     private IPortalComponentResponse response;
     private int visibleRow=1;
     TableBean myBean;
     public void doInitialization(){
               response = (IPortalComponentResponse) this.getResponse();
               request = (IPortalComponentRequest) this.getRequest();
                context = request.getComponentContext();
                profile = context.getProfile();
                IPortalComponentProfile profile = context.getProfile();
                Object o = context.getValue("myBean");
                if(o==null || !(o instanceof TableBean)){
                   myBean = new TableBean();
                   setBeanFromProfile(profile, myBean);
                   context.putValue("myBean",myBean);
                 }else {
                   setBeanFromProfile(profile, myBean);
                    myBean = (TableBean) o;
                this.getData();
     public void myOnNavigate(Event event) throws PageException{
          TableNavigationEvent tne = (TableNavigationEvent) event;
          this.visibleRow = tne.getFirstVisibleRowAfter();
          if(myBean!=null)
          myBean.setVisibleRow(new Integer(this.visibleRow).toString());

How to Control the width of the Filter row in Table View

Similar Messages

Maybe you are looking for