How to Control Volume on GX-740?

How do i up the volume or make it less loud?
The only thing i can find is the windows volume control icon. Not a hardware button/slider.
How?

ah, its with the function button combo.
Sorry for not looking in the manual 
I do have another problem, sometimes i dont hear the windows click sound. Its like the sound system puts itself on standby and some time later it gets on again. i dont see a reason why i else wont hear sounds, and the other times i do hear them. (not only with click sounds, also happened with trash can ect.)

Similar Messages

  • NB520, NB550D - how to control volume at Sleep and Music state?

    I'm looking for a possibility to control volume at Sleep and Music state...
    The only fact I've noticed is that volume depends on the level set when the computer was working. But how can I change it at Sleep and Music state when the comp is swich off?

    Hi TomPL,
    I have checked the user manual and found the following information:
    The volume adjustment and mute setting might be different between Windows mode and Sleep and Music mode. Before connecting the audio device to the computer, turn down the volume of the audio device. Sound quality may also be different.
    So according this information you have to set the volume in Windows but it could be a little bit different. I found no information about changing the volume in sleep and music mode.

  • How to control volume in YouTube on iPad, on-screen?

    How can I access the volume control sliders when listening to YouTube videos on my iPad?  (Not the hardware buttons)

    Alfred DeRose wrote:
    Put the video into full-creeen mode and the volume slider is there.
    I tried that (full screen mode).  There was not (that I could see) any volume slider in a YouTube video when viewed in full screen.  This is the case for both my iPad and iPhone (both running iOS7).
    Alfred DeRose wrote:
    You can also swipe up on the screen to show Control Center. The sliders are also there.
    And this is odd.  While I can do this on my iPhone while the video is playing, the little tab at the bottom of the iPad screen will NOT come up while the video is playing.  I can swipe to get the top tap to appear but not the bottom one.  I played around with the bottom tab on the iPad and found that when I'm on a 'wallpaper' screen or viewing the contents of one of my app 'folders' then I can swipe to get the bottom tab to appear, but (apparently) not while the app is running. 
    Odd that it works differently on the iPhone vs. the iPad. (???)

  • How to control volume so that all songs play at the same level

    using itunes 11.4.  How do I control the volume so that all songs play at the same level?

    GO to the preferences in itunes or press (cmd+,)/playback and turn on sound check. If you want to same in other ios devices go to settings/music/sound check turn on

  • How to control volume in multi-room setup, with different tunes in each room?

    Hi,
    I'm thinking of replacing my Squeezebox / SqueezeServer setup and have therefore bought two Apple TV's to experiment with.
    I have a Windows Home Server on which I've installed iTunes 10.5 yesterday and I can (through RDC) use it to share music to the Apple TVs and even control the volume.
    However, playing music this way is by no means what I was hoping for - I want to be able to play DIFFERENT tunes in DIFFERENT rooms.
    Yes, that is possible through the use of my iPhone, using Remote to choose the iTunes server (the real server in this case).
    But, and here's my issue - when playing different tunes in different rooms (using the Remote app connected to my iTunes server), how do I control the VOLUME for each Apple TV? Or should I play the different tunes for different rooms in a different way?
    Kind regards
    Niclas

    Thanks!
    Yes I hope they develop either the Apple TV or Airport express or iTunes or all into a complete multi room music listening experience just like the Squeezebox / Sonos product range. They certainly have the possibility and they did try. Except they didn't make it all the way. It's fine to be able to play the same music in all rooms, but better still would be if I could play different music in different rooms AND change the volume without the need of an additional display or anything. The nice thing would be to have an airport express connected to a small amp with in-ceiling mounted speakers in e.g. the bathroom, the kids room etc. And the kids then control their own music, the bathroom has some rain forest sounds, but when I enter it, I change to the party music I was listening to in the living room, so as to get in the mood for tonights party... And when I'm ready in the bathroom, I switch back to the rain forest sound and one of the kids are so annoyed with the pumping bass from his brothers room, that he syncs to the same music, all the while I go into the kitchen and sync the kitchen with the living room and turn up the knob another notch or two.
    This is the way my house works now and I can really see it work like that with Apples products, except they haven't done it all the way yet then. Too bad - I have only used the Apple TV's two days and started to like them.

  • How to control volume with apple tv remote to mac

    My Apple TV remote is controling the volume to my Macbook pro and I don't want it to. help?

    On Mac go into system preferences - security - general. Click on the padlock (bottom right) in order to select the advanced button. Check disable remote control infrared receiver

  • How to control volume during call when hard buttons don't work?

    I was wondering if there is another way to increase the volume during a call when the hard + volume button does not work. Only the - volume button works. Is there possibly an on screen volume button or another screen I can go to for in call volume control. While on a call using the speaker, the volume is so low I can barely hear the person I'm talking to but I can't increase the volume anywhere. Please help! It's so frustrating  when you're using  the speaker phone and you can't hear anything. What's the point??  I also decreased the volume on a regular call while testing the buttons and now that's so low I can't hear that way either. Help!

    Double-click the Home button, swipe the icons at the bottom of the screen to the right twice and it should show a volume slider.  Adjust the volume then press the Home button.

  • Flash Slide Presentation...how to control volume?

    Hello,
    I am working in Flash Slide Presentation mode. I have a
    started a sound file playing on the "master" slide and I want it to
    play throughout my entire presentation. However, on a couple of
    slides, I want to play some short voice clips. How can I "turn down
    the volume" a bit on the main sound file so as to hear the short
    voice clips? And then turn it back up when the voice clip ends?
    I understand basic Actionscript. Can anyone tell me the code
    or point me to a tutorial which I can use to accomplish this?
    Thanks in advance.

    Ah, I was tying the (unavailable ) controller number and I didn't see the pitch controller option spelled out in plain sight!

  • How to control volume in Netstream

    Hello,
    I had a previous post but received no answer after a while.  I have a project in actionscript 2.0 using flash cs4.  It is a flash game.  I have the flv files loaded from my site using NetStream. Some of the videos volume is lower and I would like to adjust them without rerendering all of the videos.  I have gone on line and have tried many things, but none have worked and most have given error messages.  Below is the script I have been loading my flvs. 
    var nc:NetConnection = new NetConnection();
    nc.connect(null);
    var ns:NetStream = new NetStream(nc);
    aud1.attachVideo(ns);
    ns.play("http://www.mysite.org/video/myvideo/1.flv");
    ns.onCuePoint = function(evt:Object){
        trace(evt.name);
        trace(evt.time);
        if(evt.name == "c1") {
            trace("YO !Jump to 108!");
            gotoAndPlay(108);
    I have this script above the layer with my NetStream player. 
    Thank you for your help.
    Mark.

    Per the directions kGlad provided in the other posting...
    var st:SoundTransform=your_ns.soundTransform;
    st.volume=.5;
    your_ns.soundTransform=st;
    you should have tried...
    var nc:NetConnection = new NetConnection();
    nc.connect(null);
    var ns:NetStream = new NetStream(nc);
    var st:SoundTransform=ns.soundTransform;
    st.volume=.5;
    ns.soundTransform=st;
    aud1.attachVideo(ns);
    ns.play("http://www.mysite.org/video/myvideo/1.flv");
    ns.onCuePoint = function(evt:Object){
        trace(evt.name);
        trace(evt.time);
        if(evt.name == "c1") {
            trace("YO !Jump to 108!");
            gotoAndPlay(108);
    If that doesn't work, you should continue in your other posting, and show what you tried that doesn't work. 
    Please don't start a new one just because no one has responded for little while.  When kGlad comes around he will almost certainly respond.

  • HT3887 how can i configure my wireless keyword so i can use the Function F keys to control volume etc...? I am using 10.5.8 OS

    how can i configure my wireless keyword so i can use the Function <F> keys to control volume etc...? I am using 10.5.8 OS

    little wireless cameras would not have the ability to send back to the base, even thought the base can reach it.
    Now if you take regular cameras and wire them into a Cisco switch that was attached to a wireless bridge that could shine back to the base...now you might have something, but your still going to have to do a survey/path analysis to determine if it is feasible.
    Coverage isnt throughput. I see one base station with 3 or 4 sectoral antennas depending on direction, pointing two several distribution bridges to bridge the gaps that go out again to the cameras...something like that. And all of it should be higher in the air than your construction.

  • How to control the line-in volume input via LabView?

    Anyone know how to control the line-in volume and balance input via LabView?

    I assume you are referring to audio line-in volume control and lerft-right balance...
    If so, then check out this thread:
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000D83A0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
    Look at the info near the bottom from Paul S & Spectre. They talk about "winmm.dll"
    -cheers-
    JLV

  • How to control microphone's volume ..... Please help....urgent

    Dear all,
    I am not able to control the volume of the mic. Speaker vollume I am able to adjust. Please let me know whether there is any way to acheive this. I am in a venture of developing audio/video chat. Thanks in advance.
    Ramya

    hi ramya,
    i'm working on the same type of project, in my case i'm intrested in knowing how u controled the speaker volume..? i would also like to know have u faced any echo problem while capturing from mic or not?
    thanks in advance,
    Parth
    Dear all,
    I am not able to control the volume of the mic.
    Speaker vollume I am able to adjust. Please let me
    know whether there is any way to acheive this. I am in
    a venture of developing audio/video chat. Thanks in
    advance.
    Ramya

  • How come the volume of other programs are lowered while one FaceTime? I exchange media with friends and colleagues and I can barely hear anything. There should be a way we can manually control the volume of different programs

    How come the volume of other programs are lowered while one FaceTime? I exchange media with friends and colleagues and I can barely hear anything. There should be a way we can manually control the volume of different programs

    I own the movies and I want them to stay in my iTunes library basically forever.
    But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.
    iTunes prefs > Store > Show iTunes in the Cloud purchases.
    This will show all your iTunes purchases in your library with a cloud icon down arrow. Click the icon to redownload or click on Play to stream without downloading.
    Also see this , -> Download past purchases
    and techncially, you don't "own" the movie, You simply have a license to use it.
    Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.
    Actually, no it does not tell you that.
    FYI: You should keep copies of all yoru iTnue spurahses as the labels/movie studios/copyright owners can pull their product at anytime and it won't be available to redownload.
    Suggestions here -> http://www.apple.com/feedback/

  • How to control system volume by moving mouse up and down using java

    hi,
    please give me suggestion that how to control the system volume by moving mouse up and down in java..
    thanks,
    prabhu selvakumar.

    Prabhu_Selvakumar wrote:
    Thank u for ur reply... i dont know wat is JNI interface... i have to read about that.... Unless you're a whiz-bang C/C++ coder, using this won't be easy or pretty. For my money, if I wanted to create a program that interacted closely with a specific OS, I'd use a more OS-specific programming language such as C# if I'm coding for Windoz.

  • How Do Control My Master Volume?

    How do control my master volume?, i can only control it on my keyboard but not on the top right corner. its supposed to be black but its grey and no sound.

    System Preferences --> Sound --> Select a device for sound output to "Internal speakers" or "line out"
    You may select it Digital out.

Maybe you are looking for