How to control which AppServer is used for a process?

Hello experts!
We have the problem that we have 3 Servers from which are 2 running at 99% and one has nearly no processes running.
Is it possible to control on which ApplicationServer a process is starting?
I know, there is a possibility for process chains if you go in the menu to process chain->attributes->backround server
But we have learned that this is only true for the starting process. The following processes can run on different servers.
Does anyone know what to do?
Thanks in advance!
Peter

A few thought:
maybe you can check table RSADMINA (settings for ODS data activation) and define the server group if necessary.
Also you could check the control parameter for data extraction (V_IDOCPRMS) and make the settings.

Similar Messages

How to specify which cert to use for software virt server?

Is there a way to specify which certificate to use for each software virtual server? So, for example a user hitting https://somewhere.com would get the certificate for somewhere.com while the virtual server https://somewhereelse.com would use the certifcate with the name somewhereelse.com in it?

No, this is not possible due to limitations of the underlying protocols.
HTTP requests are sent over TCP connections which deal with IP addresses and port numbers (i.e. hardware virtual server properties), not hostnames (i.e. software virtual server properties). The HTTP protocol adds software virtual server support by allowing a client to identify the hostname (e.g. "www.iplanet.com") of the server it wishes to communicate with. This is achieved by including a "Host:" header with each HTTP request.
Unfortunately, the SSL/TLS protocols require that the web server present its SSL/TLS certificate BEFORE the client sends its HTTP request. Since the software virtual server information is contained in the HTTP request, it is not possible for the server to select different certificates for different software virtual servers.
You will need to use hardware virtual servers (i.e. virtual servers that have different IP addresses and/or port numbers) if you wish to use distinct SSL/TLS certificates.

In my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that

in my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that

while sending a email in my ipad it is showing the correct email address([email protected]) in the ""from"" field but in receipients inbox ""from"" field it is showing another email id ([email protected])

How to disable iMessage for an old Apple ID which is only used for AppStore?

How to disable iMessage for an old Apple ID which is only used for AppStore?
I used my old Apple ID for iMessage and AppStore Apps. Now I'm using my iCloud Account (second Apple ID) on my Mac as iCloud and iMessage Account.
New Apple ID - iCloud & iMessage (**** thing that I can't use my okd Apple ID for iMessage and another for iCloud) on new Mac
Old Apple ID - AppStore, iMessage days ago
So now how to disable the iMessage function for my old Apple ID which isn't used anymore?
Thank you!

Yeah the problem is that I want to be reachable by:
*new apple id
*mobile number
Earlier:
*old apple id
*mobile number
Problem - if I set in Settings => Messages => Receive at:
*new apple id
*mobile number
Others still can see my old apple id as "iMessage" although it isn't used a iMessage anymore. So how to disbale iMessage function for that?

How to control which Configuration File a package Opens with in MS Visual Studio 2008 ?

When running our jobs, I know which Configuration File is being used, as it's specified in the path.
But when opening SSIS Jobs in MS Visual Studio, lets say there is four different Config files.
How do you control which one is used when you are working with the job in Visual Studio?
For example in the above screen, you can 'Add' or 'Edit' or 'Remove' Configurations but you can seem to say
"Reload this package with x Configuration", or "Select this particular one at the moment" for instance?

The configuration file mentioned last in the above screen is the one loaded last and the values of this file are applied. You can specify the sequence of the file with the arrow buttons on the right in case if you want a different config file to be loaded
in development and then change them back when you are deploying the package as a job.
Surender Singh Bhadauria
My Blog

How can a structured frame be used for translating books to foreign languages?

I keep reading about how a structured approach can improve the translation process (from english to foreign languages), however, i can't seem to find specifics about a particular method or tutorials about how to go about it (specifically). My question is, how (specifically) can structured framemaker be used for translation from english to foreign languages? Links to tutorials on this issue would be greatly appreciated. Thank you.

@Ian Proudfood
A well organized XML based project will definitely save translation costs. There are many advantages to the XML approach to translation management including:
Almost zero DTP rework costs - make the EDD/Template do all of the work!
Translation is application version independent - no need to wait for the Translation Memory/CMS system vendor to support the latest version of FrameMaker.
»... a well organized XML based project will definitively save translation costs.« – I have read sentences like this from a lot of consultants. And I have consulted/supported a lot of customers after those consultants left the stage. I always hear more or less the same from all of those clients. No question, I hear a lot of arguments for working with XML in tech doc, most of the arguments you mention included. Most of the tech writers are happy with the new structured FrameMaker and enjoy writing. And, cross your heart: Finally there's no alternative to XML in the long term if you take your tech writer job seriously. No question – working with pure XML in a professional information architecture in a structured, guiding editing environment like FrameMaker is cool, fun, faster and produces more open, more accessible, more reusable, more reliable, more consistent, in a nutshell: more valuable data.
But what I have never ever heard, and I'm talking about several hundred companies, is: We save more money on translation now. You might imagine that this is surprising me since many years. This is why I always ask: Did you save any costs in your translation projects? Surprisingly the answer is always: No. Actually some – no, wait: many – tell me, that their translation agency even charges more now, because they have a lot of new costs:
Costs, to customize their translation memory system to the clients custom xml,
costs to follow badly or not documented changes in the client's xml structure (DTD/Schema changes) in the TMS,
costs because of more engineering work like
valididating xml in advance,
fixing invalid xml exports,
fixing invalid translations due to – sometimes massively – increased amount of tag errors because of tagging differences of "old" (legacy mif) and "new" (xml) tags,
dealing with just too big XML files that need to be carefully split, so that the TMS has a chance to read it, or alternatively:
"glue" the ten-thousand xml "snippets" to more handy chunks,
project managers and translators that need to do additional checks, validations, verifyings - and often not knowing what to do with those cryptic error messages, meaning additional support costs
Of course, many if no all of these and many other problems I did not mention here can be solved. And many are not exactly system immanent problems but communication problems (like introducing or renaming elements/attributes but not documenting this and not communicating this to the translation service provider) or would apply to any system change (e.g. also when switching from Word to Frame). However, I do not know of any single translation company on this planet (and I know virtually thousands of them from countries all over the world) that reduced the price per word for just a single pence, just because the client switched over from Word/Quark/FrameMaker/InDesign/Whatever to XML.
Just ask your translation service provider: Will you charge me less per word if I send you XML instead of MIF? I would really be surprised to hear a "yes". And frankly, if you have ever compared a professional FrameMaker document with the same document in xml format in a professional system like Trados: There is actually no difference that would justify any price difference. The text is the same, the amount of words identical, the number of tags is identical, it even looks identical in the translation system (I can post screenshots if you like). From the translation perspective there is no single reason why a translator should charge a single pence less.
So, it's a modern myth, that switching to xml reduces translation costs. That might be true, if you come from a really medieval documentation szenario with MS Word or the like, with manual formatting without any styles and so on (I see tech docs every day where even the TOC is typed in manually!!!) and swith from there to a modern structured xml authoring in combination with other supporting tools like authoring memory / authoring assistance, controlled language, translation memory and terminology managent and control, snippet based content management and so on. That will increase the consistency and quality of your data, which will reduce translation costs in the long term. But the truth is: This has nothing to do with XML per se, but with professional writing and professional management.
So, what's left in the money saving story? No more DTP in the target languages? I always hear, that with XML and FrameMaker you do not have to "format" the translated document. The truth is: If you have a professionally formatted (unstructured) document, you don't have to take care of it, too. Modern tools like Trados keep 100% of the formatting 100% correct in the translated document. If the underlying template is intelligent enough to take account of text amount changes due to longer translations, and if you don't have too many local formatting overrides, the DTP is actually zero and can be reduced to a few mintes/hours for "flying" of the document to check out for unexpeted problems wich can occure in both structured and unstructured documents.
Just to give some numbers on this: We are processing every day technical documentations for a quite big company. A typical documentation from them is about 250 pages in unstructured FrameMaker 9 (source language is English). Until now they were resistent to all my XML pushing. The Documentation is based on a straight, simple template (with our help "reduced to the max") and there are no formatting overrides (a script automatically checks this). The post translation Quality Assurance effort is - depending on the target language - usually something between 1 to 4 hours – that's a few seconds per page for the languages where already a lot of past Quality Assurance Steps went back into the Translation Memories and up to a minute per page for more "problematic" languages).
So, again: XML will not save you a single pence on translations. But it might help you to produce more open, more accessible, more reusable, more reliable, more consistent, in a nutshell: more valuable data. But if you already have properly set up (ustructured) FrameMaker Documents and already work with a professional translation memory system, you will be quite disappointed to learn, that the impressive money saving promises you recently saw on that great PowerPoint slides melt down to a few bucks over a couple of years.
Kind regards,
Stefan Gentz

CRM 2011: Can you control which form is used based not security roles, but on a field value?

I see that you can control which form is used based on security roles, but can you control it based on other field values? I'd like a new record to use a different form until a given status is updated. I have a status of draft and active. So
it would be nice if I could use form1 for those in draft, form2 for those that are active. But I only see where you can control that via the security roles.
I can code all of this via JavaScript, but having the ability to use two separate forms would be nice. Is that even possible.
Best regards,
Jon Gregory Rothlander

Hello,
Recheck following article - http://gonzaloruizcrm.blogspot.com/2014/11/avoiding-form-reload-when-switching-crm.html
Dynamics CRM MVP/ Technical Evangelist at SlickData LLC
My blog

Which method is used for event creation

Dear All,
My client has more then one Purchase Organization. Workflow for Purchase order release very from pur org to pur org. For example - workflow WS92000030 is trigger when PO is created for India pur org where as workflow WS92000021 is trigger when PO is created for US pur org.
I checked and found that same Object Type - BUS2012 & event - RELEASESTEPCREATED is used in all Pur. Org PO release workflow. Also I found in Transaction code - SWETYP that Type linkage activate for BUS2012, RELEASESTEPCREATED in all the PO workflow - WS92000030 & WS92000021.
As per my knowledge, event can be created in various way such as Function module, Change document, General status management, Business Transaction Events etc.
Can some one guide me, how can I found that which method is used for event creation in different pur org?
How can I fould what is the fuctional module used for event creation if Fuctional module used for event creation.
For your information, I can see in T. Code - SWUO that 'Result dependent on a check function module' for all the workflow - WS92000030, WS92000021 etc.
Thanks in

Hi Sahu,
I dont think they have used the Function module or change document or any other kind of methods to trigger the workflow. This is because RELEASESTEPCREATED method is a standard method and it will be triggered by standard SAP. They can not make changes in standard sap saying RELEASESTEPCREATED should be triggered for this Purchase Org .
Istead what i think is, they might have given the Event Condition for each workflow.
In SWDD>> basic settings>> Start Events, we can give condition on triggering the workflow.
Please check this.
Regards,
Gautham

After reopening Firefox does not remember which desktop was used for each window. Can you help, please.

I'm using two displays and several desktops on my Mac (OS X 10.9.4).
When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?

Hi Nerva,
Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.

HT1918 I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

JarleEkanger wrote:
How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
Here's one simple way to do it..
(If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
averages of 10.png ‏5 KB
averages of 10.vi ‏9 KB

How to decide which adapter to use from IDOC and RFC?

Hi All,
When interating XI with an SAP system,
How to decide which adapter to use from IDOC and RFC?
Thanks.

Hi,
you can also consider to use ABAP Proxy if you are working with Systems based on SAP Web AS 6.40.
Here some useful links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm">ABAP Proxy Runtime</a>
ABAP Proxies in XI(Client Proxy)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server Proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
How do you activate ABAP Proxies?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
XI: Reliable Messaging EOIO in ABAP Proxies
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
More links for proxy:
proxies and performance...
Hope this help
Francesco

How to control PO Release strategy using WorkFlow

please tell me how to control PO Release strategy using WorkFlow.
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on May 31, 2011 9:35 AM

Hi,
Yes they are same unless you differentiate by using
1> Purchasing Document Category i.e CEKKO -BSTYP
A..... Request for Quotation
F......Purchase Order
K......Contract
L......Scheduling Agreement
So if you just create a characteristics for CEKKO-BSTYP then maintain its values only for F so it will not be applied to RFQ

How to identify which applicarion is using the DVD burner?

How to identify which applicarion is using the DVD burner? Ot is not allow me to burn the DVDs genetrated in the Final Cut 7

I think you'll find that the application is Final Cut Pro... the message is bug. I get a similar message when disconnecting external drives after using them with FCP (even when the project is no longer loaded.)
As I mentioned above, the accepted workflow is to export the sequence to one of your hard drives using the Export>QuickTime Movie path with Settings:Current Settings and Make Movie Self-Contained checked like this:
This gets you a high quality "master copy" which you open in Compressor for transcoding. You should use the DVD: Best Quality setting for the duration of your movie.
this gets you the high quality MPEG-2 and AC-3 files for DVD Studio Pro authoring.
If you've never used DVD Studio Pro before, you can use iDVD instead. For iDVD, you just drag and drop your "master" on iDVD and it takes it from there. Both make a very professional product.
hope this helps.

How to find which datasource is using table JCDS?

How to find which datasource is using table JCDS?

Hi,
Please find the below link and identify whether will it meet your requirement or not ... If it meets your requirement then I can provide you more documents related to the same which we have in our project.   We were using the same for Plant Maintanance project...
For this report the required information is gathering from the different data sources from the ECC system. This report requires object status functional location attributes, Equipment attributes and some specific information apart from normal transaction data for an order.
u2022     Main feeding data sources for this report are 2LIS_17_ORDER and 2LIS_18_ORDER.
u2022     Requires the object status data (system status, number object status and un-number system status) is feeding from different DSO where the status data is staging with different data flow.
u2022     Requires the Order planned end date which is dependent on the operation planned completion date. so we are feeding this field from Operationu2019s DSO where the planned date is staging with different data flow.
u2022     Required characteristic data and attributes of the Functional location is getting from the master data .The 0FUNCT_LOC is updating by master data data sources
u2022     Required standard class of the functional location is updating from other DSO where the classification data is staging with the help of different data flow.
2LIS_17_ORDER and 2LIS_18_ORDER Data flow Details : No enhancement was done for these data sources .
Status Data Flow Details:
The status data is staged because ,this dat is required for the reports based on the Orders, Operations , Notifications, Functional Location and Equipment.
To load suitable data to different DSOs from the Status DSO we maintain the Filters for status profile and status at DTP level.
Required status change dates are deriving based on changed on date ,system status while loading from status DSO to Order DSO.
The system status ,Number object status and un- numberd object status are feeding from status DSO only.The status DSO is updating by u20180TE_OBJ_STATUS_HISTu2019.This Is based on the tables JCDS,JSTO and T000.
JCDS     MANDT     =     JSTO     MANDT
JCDS     OBJNR          =     JSTO     OBJNR
T000     MANDT     =     JCDS     MANDT
This DS has enhanced for the below two fields
1.     Order Number
2.     Operation/Activity Number
The Logic to populate the above two fileds is as below.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/1522bae6aa46b8802dca454e846d58/frameset.htm
regards
BVR

Which CKM is used for moving data from Oracle to delimited file ?

Hi All
Please let me know Which CKM is used for moving data from Oracle to delimited file ?
Also is there need of defining each columns before hand in target datastore. Cant ODI take it from the oracle table itself ?

Addy,
A CKM is a Check KM which is used to validate data and log errors. It is not going to assist you in data movement. You will need an LKM SQL to File append as answered in another thread.
Assuming that you have a one to one mapping, to make things simpler you can duplicate the Oracle based model and create a file based model. This will take all the column definitions from the Oracle based model.
Alternatively, you can also use an ODI tool odiSQLUnload to dump the data to a file
HTH

How to control which AppServer is used for a process?

Similar Messages

Maybe you are looking for