How to converge two conversations on iOS 8?

So I have a friend from England who I texted with a ton when she was in America, it was all iMessage btw. Then yesterday when she left she changed out her SIM card and now we have two different conversations on my phone, one from her American number, and one from her English number. Is there a way to converge the two conversations? I don't want to delete any of the messages.
<Edited By Host>

Just to add, the two numbers are under the same contact.

Similar Messages

How do I sync iMessage on iOS with Messages on OSX Lion?

This morning, an Update for Messages on OSX was announced.
I just downloaded the Beta and it is running quite well.
There is one last question!
How do you sync iMessage on iOS with Messages on OSX Lion.
Example:
I'm texting with Jana on my Mac - but I can't see this conversation on my iPhone / iPad even tho´ the email adress is added in my "iMessages-Settings" on iPhone/iPad.
I also can't start a conversation on my iOS devices and continue them on my Mac.
Anybody out there knowing what to do?
Best regards from Germany.
Andreas

Hi,
I contacted my son on his iPhone by his number.
He did not have his email linked to his Apple ID
When he did that he could message me with that ID rather then the phone number.
11:11 PM Thursday; February 16, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

OCIString : How to comapre two OCIStrings & can we change OCIString to text

Hi,
How to comapre two OCIStrings & can we change OCIString to text.
Also can we change OCIString to regular C++ string.

Use the following interface to convert to text; Refer manual for all others conversions required.
text OCIStringPtr ( OCIEnv env,CONST OCIString *vs );

How to update Ipad 2 from IOS 4.3.5 to IOS 5. Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

how to update Ipad 2 from IOS 4.3.5 to IOS 5? Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Difference between two release of IOS : 15.4(3)M0.1 & 15.4(3)M1

Hi There,
I am working on project to test ios on Cisco 3945 series router. I did my testing based on pre-release version of ios 15.4(3)M0.1.
Cisco has released last month ios version as 15.4(3)M1.
Could you please let me know if there are any differences between these two versions of ios(e.g. features or functionality)?
Kindly advise me.
Regards,
Prashant

Hi ,
as per my knowledge you could browse feature list from Train station
http://wwwin-irt.cisco.com/trainstation/jmp?&-p=pi22
and if you need diffs b/w these two version you could very well browse using diff (cc diff) tool with followings labels( just dig how to get source difference b/w 2 labels in clear case documents)
V154_3_M1 2014-10-21 14:35:22
V154_3_M0_1 2014-07-30 16:57:11
you could find labels from version string using following tool
http://wwwin-metrics.cisco.com/cgi-bin/scmdbq?item=&vob=/vob/ios&.submit=Submit+Query
Thanks,
-Shiv

How to combine two datarows (business component data) in BI Publisher

Hi ,
We are using BI Publisher in Siebel Environment.
We have data coming from two business components (like from 2 diff tables)
a) <?for-each:ssTest1?>
b) <?for-each:ssTest2?>
ssTest1 and ssTest2 are the business components
We need to combine these 2 datarows (a&b) and show the data into a single combined data row for ex like <?for-each:ssTest1ssTest2?> and show all the fields in that.
I'm not sure how we can combine these two data rows into a single combined data row and show the data.
Any help from any one would be apprecated.
Thanks
PV
Edited by: user8633002 on Oct 21, 2010 4:05 PM

Hi sajid
There was nothing more description about your issue in this site and I found an issue below is mostly like yours
http://www.codeproject.com/Questions/855487/how-to-combine-two-table-value-in-rdlc-report
In the issue above, if you want to show the two other tables in the report, I think you could combine the tables into one datatable joining on key. The link below show an example of a DataSet Helper from Microsoft about combine DataSets. Take note of
the related content for other DataSet Helper examples. And then you could use the datatable in your RDLC.
# HOW TO: Implement a DataSet JOIN helper class in Visual C# .NET
http://support.microsoft.com/kb/326080/en-us
In an alternative way, I think you could create a view in the database which combine your tables and use it in your rdlc.
In addition, your issue is about asp.net and you could get more support in the asp.net forum whose link as below.
http://forums.asp.net
Best Regards
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

How to use Two main windows with in a page in script ?

Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.

HI..,
u need to go for SPLITTING THE MAIN WINDOW !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose Edit --> Main windows.
A dialog box appears.
-->Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
-->Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:

Left margin of current column + Window width + Horizontal spacing = Left margin of next column
In label printing, the field Upper margin also varies from main window to main window:

Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh

How do I get this beta IOS 7.0.2 JUNK TO WORK with my iPod touch 5???

How do I get this beta IOS 7.0.2 JUNK TO WORK with my iPod touch 5?? I was prefectly happy with my iPod until I got the notice to upgrade itunes to 11.1 and would you like to upgrade your iPod from IOS 6 to IOS 7. And like an idiot I took the little green pill and pushed the button. Now I can't open iTunes, some apps; like the Lindsey Sterling app, Safari and Disney don't work either (not that I care about the Disney one, but, it's part of the base setup, you'd think "IT" would work!) almost anything with video links will not open, iCloud can't find me. All I get is that annoying white screen. I'M NOT HAPPY! I could have bought a Windows machine for a lot less money and have the same problems!?! (I'll bet Mr. Jobs is spinning like a top right now!) And I have goggled-- found a few fixes: re-install, restore, etc. found one that stated to get iTunes back to go into the iPods setting by double ckicking the home button go to iTunes app and sign out, then sign in again-- those options didn't work. JEM24

If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

How do I share windows and iOS on my MAC book pro

how do i share windows and iOS on the same hard disk on my MAC? will each of the operating system see the whole disk?

Either you don't understand or misuse just what iOS is, it is only found on iPad, iPhone, iPod and does not run on Macs in any way, and as far as we here the only operating system of interest is Mac OS X Lion 10.7.5 or above.
There are forums for iPad and if you have a notebook then you want MacBook Pro forum.
As for Windows, there is a forum for "Boot Camp" to set aside and use part of your hard drive for Windows to run natively.
MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
http://www.apple.com/support/ipad
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Learn more about how Mac computers can run Windows 8 using Boot Camp 5.
http://support.apple.com/kb/HT5628
Products Affected
Boot Camp, Windows 8
General installation questions
What is Boot Camp 5?
Boot Camp 5 is not a release of OS X software. Rather, it is a release of the Windows Support Software (drivers). You will need to use this software on your Mac with Windows 8 or Windows 7. For more information on Boot Camp 5, see this article.
http://support.apple.com/kb/HT5639
Which Macs support Windows 8?
MacBook Air (Mid 2011 or newer)
MacBook Pro (Mid 2010 or newer)
Mac Pro (Early 2009 or newer)
Mac Mini (Mid 2011 or newer)
iMac (27-inch, Mid 2010 or Mid 2011 or newer)
For more information, see this article.
What are the System Requirements for Windows 8?
Please see this article.
How can I install Windows 8 on an eligible computer?
Use the Boot Camp Assistant. The assistant will partition your internal hard drives and install Windows 8. For more information on Windows 8 installation, see the Boot Camp Installation & Setup Guide.

How to use two split this method in my code

How to use two split this method in my code
if i got one string line which like this
("aa!bb!cc~ab!bc!cd") a
nd want to use two split to spare ! and ~ this seal for my spare point how that output
has come diff ?
public static void main(String[] args) {
 String str = "aa!bb!cc~ab!bc!cd";
 String strs[]= str.split("~");
 String strE[]= str.split("!");
 int count =0;
 for(int j=0; j < strs.length; j++){
 for (int i = 0; i < strE.length; i++){
 System.out.println(count + " " + strE);
count++;
the output how can it be like this
0 aa
0 bb
0 cc
1 ab
1 bc
1 cd

Move your second slit inside the first loop, so you are splitting the substring, not the entire string.

How to add two different page numbers in a single page

How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

It's quite complicated, see
Two Page Numbering Schemes in the Same Document.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

How to call two different servlet-url in the same application

Hi,
I want to call, consecutively these methods in my application.
response.sendRedirect(servlet-url1)
reponse.sendRedirect(servlet-url2)
but the second method dont answer,
I think, the first method redirect s with response ,
but how to call two different servlet ?
thanks

if you call the first redirect, the servlet is getting aborted, so you can redirect to the first servlet, working the stuff in it, and then in the second servlet you can redirect to the third servlet

How to sync two iphone 4s to one itunes account on one PC?

Hi
Could you please tell me how to sync two iphone 4s to one itunes account on one PC? I successfully synced my husband's phone to my account ( he got his phone first) but my phone isn't showing up in devices. Very frustrating as he know can listen to all my music and I can't!!
Thanks in advance

Try this, How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495

FEBA - How to post two or more transactions at the same time?

Hi,
 one of our banks sends the statemets with many lines that belongs to the same transaction. We have to post partially one line, and afterwards the other line. Any of you know how to post two lines at the same time from the bank statement?
Thank you in advance,
Miguel

Hi,
I'm sorry for replying so late.
The solution I reached was to change the a few things in the standard.
Now I have a new "context menu item". I select two or more transactions and I right-click the mouse. I select that "context menu item" and the next part of the code adds the total amount of the transactions to look for the correct post for the first transaction. Once posted automatically, the next transaction is posted automatically by the system.
I hope you understand my English. I've problem with technical FI terms.
Here you are the code:
First I added a new contextual menu item:
CL_FEBAN_ALV_GRID=============CCIMP
call method e_object->add_function
 EXPORTING
 fcode = 'BS_POST_ITEMS'
 text = text-002.
*{ INSERT DHTK904078 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
 call method e_object->add_function
 EXPORTING
 fcode = 'ZBS_POST_ITEMS'
 text = text-Z02.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
 call method e_object->add_function
 EXPORTING
 fcode = 'BS_KILL_ADVICE'
 text = text-004.
CL_FEBAN_ALV_GRID=============CCIMP
when 'BS_POST_ITEMS'.
 call method cl_feban_propagator=>raise_event
 EXPORTING
 i_event = 'POST_ITEMS'
 i_ref_to_item = l_ref_to_item.
*{ INSERT DHTK904078 2
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
 when 'ZBS_POST_ITEMS'.
 call method cl_feban_propagator=>raise_event
 EXPORTING
 i_event = 'ZPOST_ITEMS'
 i_ref_to_item = l_ref_to_item.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
 when 'BS_LOCK_ITEMS'.
 call method cl_feban_propagator=>raise_event
 EXPORTING
 i_event = 'LOCK_ITEMS'
 i_ref_to_item = l_ref_to_item.
CL_FEBAN_PROPAGATOR===========CM001
 when 'POST_ITEMS'.
 raise event post_items
 exporting i_ref_to_item = i_ref_to_item.
*{ INSERT DHTK904078 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
 when 'ZPOST_ITEMS'.
 data: zvalor(1) value '' .
 export zvalor from 'X' to memory ID 'ZFEBA01'.
 raise event post_items
 exporting i_ref_to_item = i_ref_to_item.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
 when 'LOCK_ITEMS'.
 raise event lock_items
 exporting i_ref_to_item = i_ref_to_item.
Now, I proceed to calculate the total amount of the selected transactions to look for the correct one to post.
LNEW_FEBAF01
* user parameter
 l_feban_position type c.
 field-symbols: <items> type item_tab_type.
*{ INSERT DHTK904077 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
 data: zvalor(1) value '',
 zkwbtr type kwbtr,
 kwb type kwbtr.
 import zvalor to zvalor from memory ID 'ZFEBA01'.
 if ( zvalor is not initial ).
 if not i_ref_to_item is initial.
 assign i_ref_to_item->* to <items>.
 loop at <items> into h_item.
 select single kwbtr
 into kwb
 from febep
 where kukey = h_item-kukey and
 esnum = h_item-esnum.
 zkwbtr = zkwbtr + kwb.
 endloop.
 endif.
 export zkwbtr from zkwbtr to memory ID 'ZKWBTR'.
 endif.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
 refresh g_picked_items.
 if not i_ref_to_item is initial.
 assign i_ref_to_item->* to <items>.
 loop at <items> into h_item.
 move-corresponding h_item to h_picked_items.
 append h_picked_items to g_picked_items.
 endloop.
 endif.
 submit rfebbu00 and return
 user sy-uname
 with anwnd = r_doc->*-anwnd
 with s_kukey in s_kukey
 with s_esnum in s_esnum
 with buber = g_posting_area
 with mregel = '1'
 with function = 'C'
 with mode = g_mode
 with p_bupro = g_bupro.
*{ INSERT DHTK904077 2
*--> Miguel Estu00E9vez - 17/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
 if ( zkwbtr is not initial ).
 select single kwbtr
 into kwb
 from febep
 where kukey = h_kukey-low and
 esnum = h_esnum-low.
 zkwbtr = zkwbtr - kwb.
 export zkwbtr from zkwbtr to memory ID 'ZKWBTR'.
 endif.
*<-- Miguel Estu00E9vez - 17/06/2008
*} INSERT
 refresh s_kukey.
 refresh s_esnum.
 clear h_kukey.
 clear h_esnum.
endloop. "loop over all picked items
call function 'CUSTOMIZED_MESSAGE'
 EXPORTING
 i_arbgb = 'NEW_FEBA'
 i_dtype = '-'
 i_msgnr = '110'.
RFEBBU00
* original transaction currency provided and posting area = 2.
 ftclear-selvon = febep-fwbtr. "INSERT - mpEURO
 ENDIF. "INSERT - mpEURO
 CONDENSE ftclear-selvon NO-GAPS.
*{ INSERT DHTK903977 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
 data: zkwbtr type kwbtr.
 import zkwbtr to zkwbtr from memory ID 'ZKWBTR'.
 if ( zkwbtr is not initial ).
 ftclear-selvon = zkwbtr.
 clear zkwbtr.
 endif.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
APPEND ftclear.
** Begin of comment C5053248
* perform druck_buzei_ftclear using ftclear-agkon.

How to put two ipods on one computer

how to put two ipods on one computer

Set up the second exactly the same way as you set up the first. If iTunes is already installed, it doesn't need to be installed again.
(64746)

How to converge two conversations on iOS 8?

Similar Messages

Maybe you are looking for